Before this fix, only the first statement of the trap was executed if
evalskip was set. This is for example the case when:
o "-e" is set for this shell
o a trap is set on EXIT
o a function returns 1 and causes the script to abort
Reviewed by: jilles
MFC after: 2 weeks
Have mkbuiltins write the prototypes for the *cmd functions to builtins.h
instead of builtins.c and include builtins.h in more .c files instead of
duplicating prototypes for *cmd functions in other headers.
These are called "shell procedures" in the source.
If execve() failed with [ENOEXEC], the shell would reinitialize itself
and execute the program as a script. This requires a fair amount of code
which is not frequently used (most scripts have a #! magic number).
Therefore just execute a new instance of sh (_PATH_BSHELL) to run the
script.
This matches the constants from <signal.h> with 'SIG' removed, which POSIX
requires kill and trap to accept and 'kill -l' to write.
'kill -l', 'trap', 'trap -l' output is now upper case.
In Turkish locales, signal names with an upper case 'I' are now accepted,
while signal names with a lower case 'i' are no longer accepted, and the
output of 'killall -l' now contains proper capital 'I' without dot instead
of a dotted capital 'I'.
This is useful so that it is easier to exit on a signal than to reset the
trap to default and resend the signal. It matches ksh93. POSIX says that
'exit' without args from a trap action uses the exit status from the last
command before the trap, which is different from 'exit $?' and matches this
if the previous command is assumed to have exited on the signal.
If the signal is SIGSTOP, SIGTSTP, SIGTTIN or SIGTTOU, or if the default
action for the signal is to ignore it, a normal _exit(2) is done with exit
status 128+signal_number.
* Make 'trap --' do the same as 'trap' instead of nothing.
* Make '--' stop option processing (note that '-' action is not an option).
Side effect: The error message for an unknown option is different.
It should use the original exit status, just like falling off the
end of the trap handler.
Outside an EXIT trap, 'exit' is still equivalent to 'exit $?'.
Example:
sh -c '(trap "echo trapped" EXIT; sleep 3)'
now correctly prints "trapped".
With this check, it is no longer necessary to check for -T
explicitly in that case.
This is a useful bugfix by itself and also important because I plan to
skip forking more often.
PR: bin/113860 (part of)
PR: bin/74404 (part of)
Reviewed by: stefanf
Approved by: ed (mentor)
would always terminate if eval returned with a non-zero exit status regardless
if the status was actually tested. Unfortunately a new file-scope variable
is needed, the alternative would only be to add a new parameter to all
built-ins.
PR: 134881
and linting procedure:
1. Remove useless sub-expression:
- if (*start || (!ifsspc && start > string && (nulonly || 1))) {
+ if (*start || (!ifsspc && start > string)) {
The sub-expression "(nulonly || 1)" always evaluates to true and
according to CVS logs seems to be just a left-over from some
debugging and introduced by accident. Removing the sub-expression
doesn't change semantics and a code inspection showed that the
variable "nulonly" is also not necessary here in any way (and the
expression would require fixing instead of removing).
2. Remove dead code:
- if (backslash && c == '\\') {
- if (read(STDIN_FILENO, &c, 1) != 1) {
- status = 1;
- break;
- }
- STPUTC(c, p);
- } else if (ap[1] != NULL && strchr(ifs, c) != NULL) {
+ if (ap[1] != NULL && strchr(ifs, c) != NULL) {
Inspection of the control and data flow showed that variable
"backslash" is always false (0) when the "if"-expression is
evaluated, hence the whole block is effectively dead code.
Additionally, the skipping of characters after a backslash is already
performed correctly a few lines above, so this code is also not
needed at all. According to the CVS logs and the ASH 0.2 sources,
this code existed in this way already since its early days.
3. Cleanup Style:
- ! trap[signo][0] == '\0' &&
+ ! (trap[signo][0] == '\0') &&
The expression wants to ensure the trap is not assigned the empty
string. But the "!" operator has higher precedence than "==", so the
comparison should be put into parenthesis to form the intended way of
expression. Nevertheless the code was effectively not really broken
as both particular NUL comparisons are semantically equal, of course.
But the parenthesized version is a lot more intuitive.
4. Remove shadowing variable declaration:
- char *q;
The declaration of symbol "q" hides another identical declaration of
"q" in the same context. As the other "q" is already reused multiple
times and also can be reused again without negative side-effects,
just remove the shadowing declaration.
5. Just small cosmetics:
- if (ifsset() != 0)
+ if (ifsset())
The ifsset() macro is already coded by returning the boolean result
of a comparison operator, so no need to compare this boolean result
again against a numerical value. This also aligns the macros usage to
the remaining existing code.
Reviewed by: stefanf@
itself does that if you set EL_SIGNAL. Instead, set a flag and check it
before calling el_gets(). This is safer, but slower to respond to changes.
Pointed out by: mp
o Old-style K&R declarations have been converted to new C89 style
o register has been removed
o prototype for main() has been removed (gcc3 makes it an error)
o int main(int argc, char *argv[]) is the preferred main definition.
o Attempt to not break style(9) conformance for declarations more than
they already are.
o Change
int
foo() {
...
to
int
foo(void)
{
...
make /etc/rc interruptible in cases when programs hang with blocked
signals) isn't standard enough.
It is now switched off by default and a new switch -T enables it.
You should update /etc/rc to the version I'm about to commit in a few
minutes to keep it interruptible.
foreground child is running. Formerly, traps were exceuted after the
next child exit.
The enables the user to put a breaking wrapper around a blocking
application:
(trap 'echo trap ; exit 1' 2; ./pestyblocker; echo -n)
The "echo -n" after the child call is needed to prevent sh from
optimizing the trap-executing shell away. I'm working on this.
i.e. this makes emacs usable from system(3). Programs called from
shellscripts are now required to exit with proper signal status. That
means, they have to kill themself. Exiting with faked numerical exit
code is not sufficient.
Exit with proper signal status if script exits on signal.
Make the wait builtin interruptable, both with and without traps set.
Use volatile sig_atomic_t where (and only where) appropriate.
(Almost) fix printing of newlines on SIGINT.
Make traps setable from trap handlers. This is needed for shellscripts
that catch SIGINT for cleanup work but intend to exit on it, hance
have to kill themself from a trap handler. I.e. mkdep.
While I'm at it, make it -Wall clean. -Wall is not enabled in
Makefile, since vararg warnx() macro calls in usr.bin/printf/printf.c
are not -Wall-able.
PR: 1206
Obtained from: Basic SIGINT fix from Bruce Evans
cast value that was always ignored. Rev.1.9 of trap.c made this
more bogus by returning a semantically different value after calling
siginterrupt(). Avoid these problems by not returning a value.
trap 'echo xxx' 1 2 3 15
read x
is not interrupted by ^C (due to restartable read syscall) and must be
interrupted per POSIX
Worse case:
read -t 5 x
hangs forever after ^C pressed (supposed to timeout after 5 secs)
Fixed by adding siginterrupt(signo, 1) after catch handler installed
2) Do not reinstall sighandler immediately after it is called,
BSD do it for us
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
while remaining (becoming :) compatible with other popular shells.
Specifically these changes include:
1) Implement 'trap -l' to get a list of valid signals names. This
is useful if you wanted to do something like reset all signal
handlers to there defaults values, in which case something like
this will do the trick.
trap `trap -l`
2) Reformat the output of 'trap' so it can be saved and later eval'd
to restore the saved settings.
3) Allow the use of signal names as well as signal numbers.
4) Fix trap handling of SIGCHLD so that commands like the following
(albeit, contrived) won't cause sh(1) to recurse ad infinitum.
trap uname 0 20
5) Make variables static that are used only in trap.c.
6) Minor 'style(9) police' mods.
merge of parallel duplicate work by Steve Price and myself. :-]
There are some changes to the build that are my fault... mkinit.c was
trying (poorly) to duplicate some of the work that make(1) is designed to
do. The Makefile hackery is my fault too, the depend list was incomplete
because of some explicit OBJS+= entries, so mkdep wasn't picking up their
source file #includes.
This closes a pile of /bin/sh PR's, but not all of them..
Submitted by: Steve Price <steve@bonsai.hiwaay.net>, peter
