Commit Graph

450 Commits

Author SHA1 Message Date
Greg Lehey
60402eb12d Add 'initialized' state for subdisks. After initializing, the subdisk
goes into initialized state, not 'up'.  This makes it easier to ensure
consistency in multi-plex volumes.

update_plex_state: redo transitions from empty and initialized
subdisks to up or reviving, depending on the number of plexes.

Reported-by:	Bernd Walter <ticso@cicely.de>
		Remy Nonnenmacher <remy@synx.com>
1999-08-15 02:29:14 +00:00
Poul-Henning Kamp
49ff4debd3 Spring cleaning around strategy and disklabels/slices:
Introduce BUF_STRATEGY(struct buf *, int flag) macro, and use it throughout.
please see comment in sys/conf.h about the flag argument.

Remove strategy argument from all the diskslice/label/bad144
implementations, it should be found from the dev_t.

Remove bogus and unused strategy1 routines.

Remove open/close arguments from dssize().  Pick them up from dev_t.

Remove unused and unfinished setgeom support from diskslice/label/bad144 code.
1999-08-14 11:40:51 +00:00
Greg Lehey
af78609425 Tidy up comments.
Add definitions for VINUM_BLOCK_PLEX and VINUM_CHAR_PLEX.

struct plex: add lock-related variables.

struct rangelock: add variables.
1999-08-14 06:31:37 +00:00
Greg Lehey
c515a27bbd Clean up comments.
Don't return "can't do it" when the user requests a state change to
the current state.  This previously caused silly messages like "Can't
start <foo>: invalid argument", when in fact <foo> was already
started.

set_plex_state: don't set state for non-existent plexes.

update_plex_status: as long as we have initializing subdisks, we're
		    initializing.
1999-08-14 06:30:56 +00:00
Greg Lehey
b8962e0ff8 Clean up some comments.
Move the declaration of freerq() to request.h.

logrq: add support for lock events.

vinumstart: solve a problem where removing a plex from an active
	    volume could cause attempts to access non-existent plexes.

launch_requests: don't set a request group active until we're sure we
		 can launch it.  This caused some hangs under unusual
		 circumstances.

bre: don't set XFR_BAD_SUBDISK if we're not going to use it.

build_read_request: correct recovery, which caused some hangs under
		    (other) unusual circumstances.

build_rq_buffer: don't set bp->b_dev if we don't have a dev.

sdio: clean up, remove obsolete code.

deallocrqg: unlock any locks the rqg may have.
1999-08-14 06:30:15 +00:00
Greg Lehey
a87d57a3e8 Tidy up some comments.
bre5:
  Shorten some lines.

  Desired-by:  bde

  If we're reading from a short plex, return EOF indication.

  Always lock the stripe before starting a transfer.  Hopefully the
  current version will solve some data integrity problems that have
  been reported with degraded RAID-5 plexes.

  Reported-by:	Bernd Walter <ticso@cicely.de>
		Remy Nonnenmacher <remy@synx.com>
1999-08-14 06:29:25 +00:00
Greg Lehey
e5738c9f66 Add keypairs replace and readpol. These got forgotten in a previous
commit, but since they don't work yet, nobody noticed.
1999-08-14 06:28:48 +00:00
Greg Lehey
998115ba43 rewrite lockrange and unlockrange. Hopefully the current version will
solve some data integrity problems that have been reported with
degraded RAID-5 plexes.

Reported-by:	Bernd Walter <ticso@cicely.de>
		Remy Nonnenmacher <remy@synx.com>
1999-08-14 06:28:21 +00:00
Greg Lehey
56a39b0546 Add hotspare keyword. 1999-08-14 06:27:52 +00:00
Greg Lehey
55eecd1064 vinumioctl: add ioctls for raw subdisks and plexes. Remove code for
drives (we refuse to touch drives, that's the disk driver's business).
1999-08-14 06:27:25 +00:00
Greg Lehey
4fd49b9f73 Remove some XXX comments (they're not really gone, just invisible).
Tidy other comments.

open_drive: don't call set_drive_state if we decide to take it down.
This could help avoid some race conditions with the daemon.

init_drive: don't set the drive down, we'll let close_locked_drive do
that.

close_locked_drive: set drive state to down without calling
set_drive_state.  This could help avoid some race conditions with the
daemon.

driveio: remove the function, it wasn't being used.

get_volume_label: remove volume dependencies so that we can return a
label for plexes and subdisks as well.  What a kludge.
1999-08-14 06:26:32 +00:00
Greg Lehey
6dd671ea60 Remove some XXX comments (they're not really gone, just invisible).
Remove declarations for freerq and free_rqg.

Remove DEBUG_RESID code.

freerq: check whether the request is holding a lock, free if so.

free_rqg: remove.  It wasn't being used any more.

Change the Debugger calls to panics.
1999-08-14 06:25:52 +00:00
Greg Lehey
5425c19ce4 Change definitions for get_volume_label, lockrange.
Move definition for unlockrange to request.h (it now contains
request-related parameters).

Add sddownstate.
1999-08-14 06:25:14 +00:00
Greg Lehey
b7904c2bf9 Add code which someday will help support hot spares.
checkdiskconfig(): remove.  It didn't make any sense to complain about
kernel keywords in user config files; it just made it more difficult
to convert.  Now we ignore kernel keywords if we're not in kernel
mode.

get_empty_sd: initialize sectors.

free_drive: don't close if we don't have a vp.  Maybe this will help
fix the problem that peter had, but I wouldn't count on it.

config_plex: If the plex is RAID-5, give it a rangelock structure.

start_config: Reset current drive, plex and volume so that a new
'create' command doesn't get long-dead defaults.
1999-08-14 06:24:34 +00:00
Greg Lehey
466c1060d9 vinumopen: add code for opening raw plexes. Volume-related plex
devices will probably die a death soon (yes, DES, that's correct
usage).
1999-08-14 06:22:15 +00:00
Greg Lehey
98256dfef8 Clarify some comments.
struct rqelement, enum rqinfo_type, struct rqinfo, union rqinfou: add
lock requests.

Add declarations for freerq and unlockrange.  Since they include
request structures, they can't go in vinumext.h
1999-08-14 06:21:45 +00:00
Poul-Henning Kamp
7dc5cd047f The bdevsw() and cdevsw() are now identical, so kill the former. 1999-08-13 10:29:38 +00:00
Poul-Henning Kamp
0ef1c82630 Decommision miscfs/specfs/specdev.h. Most of it goes into <sys/conf.h>,
a few lines into <sys/vnode.h>.

Add a few fields to struct specinfo, paving the way for the fun part.
1999-08-08 18:43:05 +00:00
Bruce Evans
890c628e79 Fixed all printf format errors reported by gcc -Wformat on i386's:
- %q -> %ll.

Fixed nearby errors not reported by gcc -Wformat on i386's:
- don't assume that the promotion of [u_]int64_t is [u_]quad_t.
- don't use signed formats for unsigned args.
1999-08-08 14:11:03 +00:00
Greg Lehey
1943d3438c Import RAID-5 code.
Add Cybernet copyright.

OK'd-by:     Chuck Jacobus <chuck@cybernet.com>
1999-08-07 08:22:49 +00:00
Greg Lehey
5b19bbcb6f Import RAID-5 code.
Add Cybernet copyright.

OK'd-by:     Chuck Jacobus <chuck@cybernet.com>

Define VINUM_BLOCK_SD and VINUM_CHAR_SD macros to create raw subdisk
device numbers.

Add VF_HOTSPARE flag.
1999-08-07 08:15:25 +00:00
Greg Lehey
bbc227eaa9 Update a comment. 1999-08-07 08:14:44 +00:00
Greg Lehey
1c49cd396f Import RAID-5 code.
Add Cybernet copyright.

OK'd-by:     Chuck Jacobus <chuck@cybernet.com>

update_plex_state:
  If any subdisk in the plex is initializing, set the plex to
  initializing state.  This gets rid of the ugly corrupt/degraded/up
  transitions which previously occurred.

  Desired-by: Steve Taylor <staylor@cybernet.com>

sddownstate:
  Add new function, used by checksdstate.

checksdstate:
  Let sddownstate decide what status to return.
1999-08-07 08:14:01 +00:00
Greg Lehey
780f9fa3e3 Import RAID-5 code.
Add Cybernet copyright.

OK'd-by:     Chuck Jacobus <chuck@cybernet.com>

logrq: save device major and minor numbers to compensate for lost
  dev_t.

launch_requests: Don't issue requests which are marked
  XFR_BAD_SUBDISK.  This may make things easier in bre().

bre:
  Rearrange.
  - Change some comments
  - Recognize holes in plex structure.  Formerly this could lead to
    incorrect write to the plex.  Return REQUEST_DEGRADED on a read
    request, but carry on to the bitter end on a write request, and
    mark the requests for the inaccessible subdisks with
    XFR_BAD_SUBDISK.
  - return REQUEST_EOF if the requested transfer goes beyond the end
    of the plex.  This is not an error, since other plexes may go
    further into the volume address space.

build_read_request:
  Handle REQUEST_DEGRADED returned from bre().

sdio:
  Lock buffer before issuing the requests.
1999-08-07 08:13:23 +00:00
Greg Lehey
b853969e09 Import RAID-5 code.
Add Cybernet copyright.

OK'd-by:     Chuck Jacobus <chuck@cybernet.com>
1999-08-07 08:11:22 +00:00
Greg Lehey
f9c8e4cda3 Import RAID-5 code.
Add Cybernet copyright.

OK'd-by:     Chuck Jacobus <chuck@cybernet.com>

detchobject:  Don't update the object configuration.

replaceobject: Add preliminary code.  This is not yet complete.

vinumw.h vinumparser.c:

Add keyword 'hotspare'.
1999-08-07 08:09:36 +00:00
Greg Lehey
dbac8959f7 Add definition of new ioctl (READPOL) for setting the read policy of a
plex.  The code is not yet complete.
1999-08-07 08:08:18 +00:00
Greg Lehey
78436bf362 Remove code to accept partitions of type 'unused'. From now on, Vinum
will only accept partitions of type 'vinum'.

format_config: Use the new %q format option in kvprintf, thus getting
  rid of some of the filthiest code I've written in a long time.  Also
  remove the lltoa() function.

With-great-thanks-to:	peter

format_config: Accept the fact that a subdisk might not be attached to
  a plex, and save the config correctly.

vinum_scandisk: Scan all slices on a drive with a Microsoft partition
  table.  Only look at the compatibility slice if nothing was found in
  the Microsoft slices.

  This change removes a frequently employed method of shooting
  yourself in the foot: people would decide that the Vinum drives
  belonged on their own slice, and they wouldn't be able to start the
  subsystem after a reboot.  Documentation updates to follow.
1999-08-07 08:07:05 +00:00
Greg Lehey
ffb0a6283d Close a memory leak. 1999-08-07 08:06:05 +00:00
Greg Lehey
b583bb9698 vinumopen: add code to open raw subdisks. This is now used to
initialize subdisks.  Probably the plex-related subdisk type will die
a death.

vinumconfig.c:

Accept (and ignore) kernel state information in userland config
files.  This saves a lot of error recovery and also makes it possible
to use the output of printconfig to create new configuration.

Remove checkdiskconfig().  It wasn't needed any more.

Start adding support for hot spare drives.  You can't put anything on
them (yet).

Change message formats from %lld to %qd.

get_empty_sd: Initialize size to -1.  Previously this was done in
config_subdisk, which is the wrong place.

start_config: set current drive, plex and volume to -1, thus stopping
  update configurations from taking their defaults from old configs.
1999-08-07 08:05:46 +00:00
Greg Lehey
9640a3a8f8 Rework many comments.
requeststatus:
  add REQUEST_DEGRADED status

struct rqinfo:
  add members devmajor and devminor to compensate for lost dev_t.
1999-08-07 08:05:19 +00:00
Greg Lehey
aa30608b44 Modify device numbering method to work with latest -CURRENT. Briefly,
the device numbers are now minor number only, so that we can still
compare them after dev_t has turned into a blob.

Broken-by:	dev_t changes
Reported-by:	Vallo Kallaste <vallo@matti.ee>
		"Niels Chr. Bank-Pedersen" <ncbp@bank-pedersen.dk>
1999-07-22 08:40:37 +00:00
Poul-Henning Kamp
82f1cd60df use vp->v_rdev;
OK'ed by:	grog
1999-07-20 07:29:54 +00:00
Greg Lehey
126152b05d Add keywords 'mirror' and 'stripe' when not in kernel mode. 1999-07-02 07:58:09 +00:00
Greg Lehey
e65333e92e Allow to unconditionally up subdisks with the -f option.
Change returns for failed state changes from EINVAL to EBUSY.

Suggested-by:  Bernd Walter <ticso@cicely.de>
1999-07-02 07:57:28 +00:00
Greg Lehey
7d6715c52c Change the type of the freelist sectors variable to u_int64_t in
order to ensure that initializers will be of correct type.
1999-07-02 07:56:47 +00:00
Greg Lehey
3252fdcd97 Lock buffer before calling strategy.
Idea-stolen-from:	peter (sys/dev/ccd/ccd.c revision 1.49)
1999-06-29 04:10:05 +00:00
Greg Lehey
839832f8d0 close_drive:
Correct race condition between caller and daemon.

  Tripped-over-by:	Zach Heilig <zach@uffdaonline.net>
			Bernd Walter <ticso@cicely.de>
			Niels Chr. Bank-Pedersen <ncbp@bank-pedersen.dk>
1999-06-29 04:08:51 +00:00
Greg Lehey
7d0e3c6f72 Correct type of intializer for (undocumented) cdevsw.d_parms.
Submitted-by:	peter
1999-06-29 04:07:55 +00:00
Kirk McKusick
67812eacd7 Convert buffer locking from using the B_BUSY and B_WANTED flags to using
lockmgr locks. This commit should be functionally equivalent to the old
semantics. That is, all buffer locking is done with LK_EXCLUSIVE
requests. Changes to take advantage of LK_SHARED and LK_RECURSIVE will
be done in future commits.
1999-06-26 02:47:16 +00:00
Greg Lehey
9faf05037c set_drive_state:
If the drive goes down, queue a close to the daemon.  In many cases
  this function gets called in process context, so it could do it
  directly, but it's more trouble finding out where we came from than
  getting the daemon to do it.
1999-06-24 08:57:16 +00:00
Greg Lehey
e7066f7303 build_request_buffer:
Don't bzero the buffer structure, it's been done already by
  allocrqg.

sdio:
  Build up a correct buffer header, don't steal linkages from system
  buffer headers.

Noticed-by: mckusick
1999-06-24 08:56:03 +00:00
Greg Lehey
49fc4f3ffa Split close_drive into two parts to ensure correct locking against the
daemon before closing a drive.
1999-06-24 08:55:02 +00:00
Greg Lehey
f9b05a3154 Implement daemonrq_closedrive function to close a drive. 1999-06-24 08:54:09 +00:00
Greg Lehey
de4a0cb61d free_drive:
Use new function close_locked_drive to close the drive.
1999-06-24 08:53:14 +00:00
Greg Lehey
8cbc0348f6 Clarify some comments.
struct request:
  Add a daemon function to close drives when they go down.
1999-06-24 08:52:27 +00:00
Greg Lehey
99f43962ac Backout last change. strerror doesn't exist in the kernel.
Spotted-by: 	"David E. Cross" <crossd@cs.rpi.edu>
1999-06-23 00:31:27 +00:00
Greg Lehey
2096c6b68a Add some comments about the VINUMMINOR macro, which is not for human
consumption.
1999-06-22 05:41:36 +00:00
Greg Lehey
b53adf6b1c bre: Don't loop if we try to access an invalid plex type. This is
typically the case when the expurgated version of Vinum tries to
     access a RAID-5 plex.
1999-06-22 05:40:51 +00:00
Greg Lehey
c9b0944731 Be more intelligent about attaching subdisks to plexes. 1999-06-22 05:37:57 +00:00
Greg Lehey
05f0cb5d5f Print more legible error message if a drive open fails. 1999-06-22 05:37:05 +00:00
Greg Lehey
d884f7143f Modify to work with phk's latest mods to cdevsw. This is a temporary
fix; it doesn't address the problem of removing the module.  If you do
the following:

  vinum stop
  fsck /dev/vinum/VOLUME

you *will* get a system crash.  What we need is a cdevsw_remove
corresponding to cdevsw_add, but that hasn't been written yet.

Submitted-by: phk
1999-06-22 05:36:13 +00:00
Greg Lehey
e4d6d0216b Modify to work with new style dev_t.
With_copious_input_from:  peter
			  phk
1999-05-15 05:49:21 +00:00
Greg Lehey
e0b8af469a Fix a bogon which stopped Vinum from recognizing half its keywords. 1999-05-11 03:55:35 +00:00
Poul-Henning Kamp
4be2eb8c49 I got tired of seeing all the cdevsw[major(foo)] all over the place.
Made a new (inline) function devsw(dev_t dev) and substituted it.

Changed to the BDEV variant to this format as well: bdevsw(dev_t dev)

DEVFS will eventually benefit from this change too.
1999-05-08 06:40:31 +00:00
Greg Lehey
9d622f47e1 Make Vinum compile correctly without VINUMDEBUG
Tripped-over-by:	Thomas Stromberg <tstromberg@rtci.com>
1999-05-08 02:50:44 +00:00
Poul-Henning Kamp
46eede0058 Continue where Julian left off in July 1998:
Virtualize bdevsw[] from cdevsw.  bdevsw() is now an (inline)
        function.

        Join CDEV_MODULE and BDEV_MODULE to DEV_MODULE (please pay attention
        to the order of the cmaj/bmaj arguments!)

        Join CDEV_DRIVER_MODULE and BDEV_DRIVER_MODULE to DEV_DRIVER_MODULE
        (ditto!)

(Next step will be to convert all bdev dev_t's to cdev dev_t's
before they get to do any damage^H^H^H^H^H^Hwork in the kernel.)
1999-05-07 10:11:40 +00:00
Greg Lehey
c4444aeb08 Include opt_vinum.h to get the VINUMDEBUG definition as early as
possible.  This fixed a problem building LINT.

Tripped-over-by: phk
1999-05-07 08:08:02 +00:00
Greg Lehey
5b6d18c5e9 Convert to use physread() and physwrite().
Advertised-by: phk
1999-05-07 08:07:09 +00:00
Greg Lehey
560863926b Remove old grunge, including references to sys/disk.h (which is going
away).

Submitted-by:	phk
1999-05-07 01:35:29 +00:00
Greg Lehey
d65937394f Remove old grunge
Submitted-by:	phk
1999-05-07 01:25:54 +00:00
Poul-Henning Kamp
b0eeea2042 remove b_proc from struct buf, it's (now) unused.
Reviewed by:	dillon, bde
1999-05-06 20:00:34 +00:00
Greg Lehey
417f97c954 Get extern declarations right.
Change DEBUG_EXITFREE to DEBUG_WARNINGS.
1999-05-02 07:59:04 +00:00
Greg Lehey
a2d8e114f4 close_drive:
If a drive has gone down and has dirty buffers associated with it,
  we'll get a panic when we try to vn_close it.  Check for this
  situation and discard any buffers; they're toast anyway.

  Only complain about usage count if DEBUG_WARNINGS is set.

check_drive:
  Change parameter name from drivename to devicename.

  Get the check for a referenced drive right.

  If the partition isn't a vinum drive, set the last error to ENODEV.

vinum_scandisk:
  Change parameter name from drivename [] to devicename [].
1999-05-02 07:51:20 +00:00
Greg Lehey
3041dc10ba vinum_mallocinfo:
Set the entry number correctly.
1999-05-02 07:50:38 +00:00
Greg Lehey
b3a717f1a8 set_sd_state:
Don't change state from reborn to reborn.  This caused a silly
  warning message.
1999-05-02 07:50:09 +00:00
Greg Lehey
a894c77db1 sizespec:
Implement scaling letter 's' to mean 'sectors' (of 512 bytes).
1999-05-02 07:49:13 +00:00
Greg Lehey
9f8115fd0c Remove some dead variables.
Change DEBUG_EXITFREE to DEBUG_WARNINGS.
1999-05-02 07:48:00 +00:00
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
Greg Lehey
cbeab55980 free_vinum: clear up a warning message. 1999-04-17 04:15:50 +00:00
Greg Lehey
09c1cbfe92 struct drive: add fields for debugging lockdrive deadlocks. 1999-04-10 08:12:44 +00:00
Greg Lehey
f83e10d7ca set_sd_state:
If a drive is down, take "empty" sds down.  Previously they were
  unchanged, which cause set_plex_state to take them up under some
  circumstances.
1999-04-10 08:12:12 +00:00
Greg Lehey
ff17305f57 When VINUMDEBUG is set, add function basename() to return the base
name of a file.  Used by MMalloc and lockdrive.
1999-04-10 08:11:44 +00:00
Greg Lehey
7ffb59f668 lockdrive: Add debug calls to catch occasional deadlocks on drives.
The problem is probably gone, but the debug checks remain
	   for a while.
1999-04-10 08:11:21 +00:00
Greg Lehey
cea0c59dfa Add flag keyword w. 1999-04-10 08:10:55 +00:00
Greg Lehey
301ef407a4 daemon_save_config:
Fix a potential drive deadlock when saving config to a non-existent
  drive.

Add debug calls to catch occasional deadlocks on drives.  The problem
(above) is probably gone, but the debug checks remain for a while.
1999-04-10 08:10:24 +00:00
Greg Lehey
c73d47fca5 Define macro LOCKDRIVE for debugging drive locking deadlocks. 1999-04-10 08:09:49 +00:00
Greg Lehey
385e19fcb6 Add declaration for basename()
Change lockdrive definition if VINUMDEBUG is set.
1999-04-10 08:09:27 +00:00
Greg Lehey
ec3a729692 Add debug calls to catch occasional deadlocks on drives. The problem
is probably gone, but the debug checks remain for a while.

update_plex_config: Catch yet another divide-by-zero problem when
		    detaching the last subdisk from a striped plex.

Uncovered-by: Michael Reifenberger <root@nihil.plaut.de>
1999-04-10 08:08:45 +00:00
Greg Lehey
d85bfa1067 update_plex_config: Eliminate a potential divide-by-zero.
Tripped-over-by: Karl Pielorz <kpielorz@tdx.co.uk>
1999-04-09 01:20:22 +00:00
Greg Lehey
4a10e91653 Modify parameter checking in LongJmp to match the reality of an
enlarged kernel memory space.

Paniced-over-by:  Karl Pielorz <kpielorz@tdx.co.uk>
		  Michael Reifenberger <root@nihil.plaut.de>
1999-04-09 01:17:50 +00:00
Greg Lehey
0ad9aafaa2 Add debug flag DEBUG_EXITFREE to log problems freeing memory on exit. 1999-04-05 04:03:45 +00:00
Greg Lehey
31e318aced remove_plex: If we don't find the plex in a volume to which it
claims to belong, remove it anyway.
1999-04-05 04:02:59 +00:00
Greg Lehey
599fbeb550 free_vinum: Clean out bdevsw entry before unloading kld.
Repeatedly-tripped-over-by: Vallo Kallaste <vallo@matti.ee>

		When VINUMDEBUG is set, free any memory found still
		allocated.

		Only log errors if DEBUG_EXITFREE is set.
1999-04-05 04:02:09 +00:00
Greg Lehey
96c60597a8 Destaticize some variables to allow checking on them when exiting. 1999-03-31 08:43:12 +00:00
Greg Lehey
dbb49f899b daemonq_return request: Clean up request queue and free all memory
before returning to die.
1999-03-31 08:42:52 +00:00
Greg Lehey
e6bd890603 free_drive: free the drive free list if it has one. 1999-03-31 08:42:04 +00:00
Greg Lehey
f990bcd3db vinumattach: Remove some really old, dead cruft.
free_vinum:	Wait for daemon to stop by checking the
		vinum_conf.flags & VF_DAEMONOPEN.

vinum_modevent:
		When compiled with VINUMDEBUG, check if we have
		forgotten to free any memory, and log an error if we
		have.

vinumopen:	Allow open of an empty subdisk (otherwise we can't
		initialize it).
1999-03-31 08:41:18 +00:00
Greg Lehey
ec78ad25c9 Add flag VF_CREATED 1999-03-30 05:01:42 +00:00
Greg Lehey
fd7505f096 Change the lengths of many ioctl parameters, which occasionally caused
EFAULTS due to sloppy programming.
1999-03-30 05:01:23 +00:00
Greg Lehey
8cb67ba580 Revise use of the vinum_conf variables drives_used, subdisks_used,
plexes_used and volumes_used.  Now these fields are only informative,
and the <object>_allocated count is used for searches, etc.  This also
required checking the object state before doing things with the
presumed object.

Problems-reported-by: Kiril Mitev <kiril@ideaglobal.com>

VINUM_<object>CONFIG: return ENXIO rather than EFAULT if an object
doesn't exist.
1999-03-30 05:01:06 +00:00
Greg Lehey
18bf283fec Revise use of the vinum_conf variables drives_used, subdisks_used,
plexes_used and volumes_used.  Now these fields are only informative,
and the <object>_allocated count is used for searches, etc.  This also
required checking the object state before doing things with the
presumed object.

Problems-reported-by: Kiril Mitev <kiril@ideaglobal.com>

vinum_scandisk: increment drive use count when we find a good one.
1999-03-30 05:00:19 +00:00
Greg Lehey
c22d0bffee Revise use of the vinum_conf variables drives_used, subdisks_used,
plexes_used and volumes_used.  Now these fields are only informative,
and the <object>_allocated count is used for searches, etc.  This also
required checking the object state before doing things with the
presumed object.

Problems-reported-by: Kiril Mitev <kiril@ideaglobal.com>

Remove unused (and braindead) functions volume_index, plex_index,
sd_index and drive_index.

Add a flag VF_CREATED for volumes.  VF_NEWBORN was being used in two
capacities, and they clashed, my Lord, they clashed.

find_object: restructure the search loop as a result of the change in
variable use.

Decrement object use count in the remove_<object> functions, not in
the free_<object> functions, which are often called with partially
initialized (and uncounted) objects.
1999-03-30 04:59:59 +00:00
Greg Lehey
8c1e93bf98 Revise use of the vinum_conf variables drives_used, subdisks_used,
plexes_used and volumes_used.  Now these fields are only informative,
and the <object>_allocated count is used for searches, etc.  This also
required checking the object state before doing things with the
presumed object.

Problems-reported-by: Kiril Mitev <kiril@ideaglobal.com>
1999-03-30 04:59:32 +00:00
Greg Lehey
dfb9ab7989 Add definition LongJmp for longjmp if -DVINUMDEBUG.
Change some comment texts
1999-03-28 08:55:04 +00:00
Greg Lehey
d7c4c59f03 set_sd_state: Handle sd_empty correctly. In particular, require
force to bring a subdisk of a RAID-5 plex out of this
		state.

update_plex_state:  Rewrite yet again.
1999-03-28 08:54:48 +00:00
Greg Lehey
d8118f9d41 Put some \ns in some log messages. 1999-03-28 08:54:25 +00:00
Greg Lehey
1238689209 Add function LongJmp which checks the parameters before calling
longjmp.  I suspect that the occasional double panic may be the result
of incorrect parameters to longjmp.  This happens, of course, like the
entire file, only with -DVINUMDEBUG.
1999-03-28 08:54:03 +00:00
Greg Lehey
738082e8b0 Remove longjmp declaration. 1999-03-28 08:53:46 +00:00
Greg Lehey
d0fe90e337 Add declaration for forceup () (in vinumstate.c)
Add declarations for setjmp, cmd_buf and longjmp.
1999-03-28 08:53:23 +00:00
Greg Lehey
f41c5231bf Remove longjmp declaration.
give_sd_to_plex: Don't set Raid-5 subdisk state here.

config_subdisk: handle the name parameter correctly when the subdisk
		was referenced in a previous plex definition.  The
		name parameter must come first.

		Handle autosizing relatively correctly.  There is
		still a danger of losing drive space if problems
		occur with an autosized subdisk.

		Set state to empty, not up, when complete.  This also
		solves a nagging problem about enforcing the need to
		initialize RAID-5 plexes.

config_plex:    handle the name parameter correctly when the plex
		was referenced in a previous volume definition.  The
		name parameter must come first.

		Handle initial state better.

update_plex_config:
		Calculate the trim factor for RAID-5 plexes correctly.

		Set the number of down subdisks correctly when reading
		from disk config.
1999-03-28 08:53:02 +00:00
Greg Lehey
cec9815419 Remove longjmp declaration.
free_vinum:	Put a timeout on waiting for the daemon to die.
1999-03-28 08:52:33 +00:00
Greg Lehey
bd51f0eff9 Add 'referenced' states to subdisks and plexes. 1999-03-28 08:52:11 +00:00
Greg Lehey
1d2ade2043 Correct the text of an obscure error message. 1999-03-24 00:43:05 +00:00
Greg Lehey
6100b4d0c5 Change the definition of VINUM_STARTCONFIG to take an int write parameter. 1999-03-23 04:50:40 +00:00
Greg Lehey
6d723f4eb0 Add flag VF_FORCECONFIG for use by the config_drive and friends. 1999-03-23 04:49:32 +00:00
Greg Lehey
ec79ff6a85 vinum_start:
remove the splbio() around the call to launch read requests.

launch_requests:
  Move the splbio() protection outside the entire launch_loop.  The
  previous location was causing problems with IDE drives, where the
  call to the strategy routine often did not complete until after
  complete_rqe deallocated the request structure.

Solution-independently-found-by: Russell Neeper <r-neeper@tamu.edu>
Problem-reported-by: Vallo Kallaste <vallo@matti.ee>
		     John Saunders <john@nlc.net.au>
		     Bernd Walter <ticso@cicely.de> (maybe)
1999-03-23 04:49:08 +00:00
Greg Lehey
8d2eda6481 VINUM_STARTCONFIG:
Pass the 'data' parameter to start_config, which uses it as the
  parameter 'force.
1999-03-23 04:48:31 +00:00
Greg Lehey
dae797bc58 init_drive:
Check for partition types FS_VINUM and FS_UNUSED.  Accept both, but
  complain about FS_UNUSED.  At a later date, only FS_VINUM will be
  accepted.

Threatened-since: over a year
1999-03-23 04:48:05 +00:00
Greg Lehey
b555657ffa Change the declaration of start_config. 1999-03-23 04:47:33 +00:00
Greg Lehey
7c0052fe03 start_config:
Add a flag `force' (VF_FORCECONFIG) to force name changes of
  existing drives.
config_drive:
  If the drive already has a vinum label, and name doesn't match the
  specified drive, do it anyway if the 'force' flag is specified.
finish_config:
  Reset the `force' flag.

Continually-tripped-over-by:  Karl Pielorz <kpielorz@tdx.co.uk>

give_sd_to_drive:
  If the drive is down, take the subdisk down and don't try to fix
  things.

update_plex_config:
  Don't try to update the config parameters of a plex which isn't
  fully configured (state plex_init or plex_unallocated).

  Correctly calculate the amount to trim off a striped or RAID-5 plex
  whose size is not a multiple of the stripe size.
1999-03-23 04:47:09 +00:00
Greg Lehey
3c7e349bca Define two superdevices for vinum(8), depending on whether they are
compiled with or without debugging support.  This enables us to catch
(fatal) mismatches between the kernel and userland.

Coalesce flags VINUM_DISKCONFIG and VINUM_READING_CONFIG.  They did
essentially the same thing.

Add VINUM_BIGDRIVE for pretending we have macho hardware.
1999-03-19 07:19:52 +00:00
Greg Lehey
def602f62b VolState: return an enum volumestate, not a (non-existent) enum volstate.
Strangely, neither gcc nor EGCS noticed this bug.

Eagle-eyed by: arno@heho.snv.jussieu.fr (Arno J. Klaassen)
1999-03-19 07:17:05 +00:00
Greg Lehey
1f3cd6add9 Perform all of vinumstrategy at splbio. This doesn't appear
necessary, but might explain some weird problems that some people have
been getting.
1999-03-19 07:15:24 +00:00
Greg Lehey
82ca4fa74c Use microtime, not getmicrotime, to note the times in the malloc and
free histories.
1999-03-19 07:14:18 +00:00
Greg Lehey
6e6d6dd86e Add debug flags DEBUG_BIGDRIVE, designed for testing only. It
pretends that each drive is 100 times as large as it really is.  Not
for use at home.

Coalesce flags VINUM_DISKCONFIG and VINUM_READING_CONFIG.  They did
essentially the same thing.
1999-03-19 07:13:31 +00:00
Greg Lehey
9e89208b39 Coalesce flags VINUM_DISKCONFIG and VINUM_READING_CONFIG. They did
essentially the same thing.

Reset flags at the right point at the end of configuration.  The
previous code disabled configuration saving at the end.
1999-03-19 07:10:19 +00:00
Greg Lehey
66c4363288 free_vinum: don't change loop bounds for deleting drives while in the loop.
This solved a problem where 'vinum resetconfig' only reset half
	    the drives.

Reported-by:  Brad Knowles <blk@skynet.be>
	      Karl Pielorz <kpielorz@tdx.co.uk>

Change the super device.  We now have three super devices:

  1.  The normal superdevice used by vinum(8).
  2.  The superdevice used by vinum(8) when compiled with debug support.
  3.  The superdevice used by the daemon.

This method allows vinum(8) to determine debug mismatches.  Also check
correctly for the device type.  The old code did not check all bits of
the minor number.

  Reported-by: a cast of thousands, most recently by Brad Knowles
               <blk@skynet.be>.
1999-03-19 07:08:40 +00:00
Greg Lehey
6f70e1c542 Modify to compile with egcs.
Prodded-by: obrien
1999-03-18 23:26:22 +00:00
Greg Lehey
e21b9d8321 deallocrqg: deallocate the correct object, also check that the object
is really in the chain.
1999-03-14 04:04:23 +00:00
Greg Lehey
017944b921 Change prototype of vinum_inactive. 1999-03-13 07:46:34 +00:00
Greg Lehey
962113a4bf Remove opencount from vinum_conf and struct vol, and disk index from
struct vol.

Add time to struct mc, remove KVA crud.

Add debug flags DEBUG_EOFINFO and DEBUG_MEMFREE.
1999-03-13 07:40:52 +00:00
Greg Lehey
f9976b8861 Part of removing vol->opencount: now we just use a flag. 1999-03-13 07:39:17 +00:00
Greg Lehey
63052eb444 Add DEBUG_EOFINFO log messages. 1999-03-13 07:38:27 +00:00
Greg Lehey
cadf346d84 Remove antique crud.
MMalloc: save the time at which the request was granted, remove more
crud.

FFree: add a circular buffer of the last 64 Free requests if
DEBUG_MEMFREE is set.
1999-03-13 07:37:44 +00:00
Greg Lehey
5c6d2cb543 lock_drive: report on and recover from an obscure situation where the
daemon can deadlock against itself.
1999-03-13 07:35:40 +00:00
Greg Lehey
301851b630 VINUM_RESETCONFIG: do the reset even if the config is open (as it has
to be for us to issue the ioctl :-).  Also remove the opencount
parameter of the config, which just never worked.
1999-03-13 07:34:56 +00:00
Greg Lehey
1a049f96ab Don't frob vp->v_usecount, it scares the hell out of the driver under
certain circumstances.
1999-03-13 07:33:37 +00:00
Greg Lehey
b1356c97c6 Change the way of recognizing whether a plex was given to a volume
after the volume had been fully operational; involves a change in the
use of the VF_NEWBORN flag.  Now if you add a plex to a volume which
is up, the plex will be down and the subdisks stale.  You need to
explicitly start the subdisks, which copies data from the good
subdisks to the uninitialized ones.

Stumbled-over-by: Ludwig Pummer <ludwigp@bigfoot.com>

give_sd_to_drive:
   correct method to give the entire largest chunk of drive to the
   subdisk.  Now it's enough to specify a length, and vinum will give
   you as much as it can.  Not to be recommended except for empty
   drives.

   Correct a bogon which made vinum refuse to give the last sector of
   a drive to a subdisk.

   Last-reported-by: Ludwig Pummer <ludwigp@bigfoot.com>

Change %q formats to %ll before the former go away.  This doesn't make
much difference, since kernel kvprintf currently doesn't support
either, and the messages in question are just error messages.
1999-03-13 07:32:40 +00:00
Greg Lehey
e80e86a302 vinum_inactive: distinguish whether we care whether the config
is open or not.
1999-03-13 07:22:00 +00:00
Greg Lehey
b8d3ec490d Change SAVECONFIG ioctl: it now writes an int parameter. 1999-03-02 22:00:19 +00:00
Greg Lehey
587ce8d9ae Correct some diagrams
Remove pid field from struct sd, struct plex and struct volume

Add flags VF_STOPPING, VF_OPEN and VF_DAEMONOPEN
1999-03-02 06:58:09 +00:00
Greg Lehey
57f9112565 sizespec: allow negative values (which signal error conditions).
catch missing (NULL) parameters.
1999-03-02 06:57:48 +00:00
Greg Lehey
a11c3a2c73 Change the name of drive state "uninit" to "referenced": it only
occurs if we have a dangling pointer to a drive.
1999-03-02 06:57:30 +00:00
Greg Lehey
75fff3fead Change printf() calls to log() calls.
set_sd_state: allow stop command to stop a reborn subdisk.
1999-03-02 06:57:08 +00:00
Greg Lehey
72dec6f286 Change printf() calls to log() calls. 1999-03-02 06:56:39 +00:00
Greg Lehey
80035a4cf1 Add keywords "size", synonym for "length", and "max".
Check for NULL name parameters.
1999-03-02 06:56:05 +00:00
Greg Lehey
39ce6e429e Change printf() calls to log() calls.
expand_table: Zero out newly allocated tables
1999-03-02 06:55:44 +00:00
Greg Lehey
1e14d0037d Add keywords "size", synonym for "length", and "max". 1999-03-02 06:55:18 +00:00
Greg Lehey
33e00380bc Change printf() calls to log() calls.
Change VINUM_SAVECONFIG: it now requires a parameter.  0 means
"configuration updates are finished, please save", and 1 means "please
just save the config".  This second meaning is invoked by the new
"saveconfig" command to vinum(8).
1999-03-02 06:54:57 +00:00
Greg Lehey
f569eff522 Change printf() calls to log() calls.
Recognize "referenced" drives by the lack of a slash in the device
name, not by a NUL character.

vinum_scandisk: return error indication (ENOENT if we can't find any
vinum drive, otherwise 0).

VINUM_SAVECONFIG: change parameters.
1999-03-02 06:54:30 +00:00
Greg Lehey
02dbb6666a New function return_drive_space
Add definitions of vinum_inactive and free_vinum, formerly local to
vinum.c

vinum_scandisk now returns int (error number)
1999-03-02 06:53:42 +00:00
Greg Lehey
e0e19a088b change printf() calls to log() calls.
Don't save config while we're reading it from disk.

Change the way we handle the daemon: if we can't communicate with it
for 1 second (which is possible), start a new one.  The daemon saves
its pid in daemonpid; on each iteration of the main loop the daemon
checks whether it's still in favour.  If not, it silently exits.
Also, when trying to communicate with the daemon, check daemonpid
first.  If it's set to 0, don't even try.
1999-03-02 06:53:15 +00:00
Greg Lehey
a0a8b3768e Change printf() calls to log() calls.
Rename the VF_KERNELOP to VF_DISKCONFIG and checkkernel () to
checkdiskconfig (), which better describes their function.

Disable configuration updates if we have an error reading in the
configuration.  This stops a "shoot-in-foot" problem where a mistake
can cause the configuration to be obliterated.

Tidy up some messages, which included superfluous \ns.

Recognize RAID-5 configuration information even in the non-RAID-5
version.  This fixes shoot-in-foot problems where starting the wrong
version of vinum would kill RAID-5 plexes.

Recognize drives that have been referenced, but for which no physical
location is known.  This is part of a modification which will
ultimately allow incrementally reading configurations.  Such drives
will have a device name "unknown".

New function return_drive_space () returns space to a drive.
Previously this was part of free_sd ().

give_sd_to_drive: don't do it if the subdisk needs more space than the
drive has available.

config_sd: if reading config from disk, accept plex offset, drive
offset and length specs of -1 to indicate error conditions.

parse_config: return ENOENT if the "read" command doesn't find any
drives.

remove_sd_entry: don't do it, even by force, if it's open.

If the size of a striped or RAID-5 plex is not an integral multiple of
the stripe size, trim the size until it is.

reinstate update_volume_config, which had atrophied, to recalculate
the size of a volume if a plex has shrunk due to stripe size
considerations.
1999-03-02 06:52:47 +00:00
Greg Lehey
571aa87170 Change printf() calls to log() calls.
vinumattach: Zero out tables after allocating them

Modify procedure at unload: if a vinum(8) has the superdev open, don't
close down.  If only the daemon has it open, send the daemon a stop
request and wait for it to close the superdev, then unload.

In order to do this, create a second superdev which is opened by the
daemon.  The open and close routines set a different bit in
vinum_conf.flags; otherwise the treatment is identical.

Remove opencount field in vol structure; replace by a flag bit, since
we can't count the number of opens.

Remove dead LKM grunge.
1999-03-02 06:52:11 +00:00
Greg Lehey
88c8f9c911 Change the name of drive state "uninit" to "referenced": it only
occurs if we have a dangling pointer to a drive.
1999-03-02 06:51:48 +00:00
Greg Lehey
9e0aa8e9b8 Correct some indentation
Implicitly-desired-by: bde

update_plex_state:  Handle empty RAID-5 plexes correctly
1999-02-11 06:44:46 +00:00
Greg Lehey
e8b3affb8e build_write_request: correct logic for handling writes to volumes with
failed plexes.

allocrqg: Remove dead code
1999-02-11 06:44:12 +00:00
Greg Lehey
8093cf90f1 check_drive: Make sure that we don't open two different drives with
the same name.  Silently return EEXIST if this happens.

vinum_scandisk: Collect drive numbers, not pointers, to avoid problems
of relocated drives.

Tripped-over-by:  Bernd Walter <ticso@cicely.de>
1999-02-11 06:43:15 +00:00
Greg Lehey
cc902735df In some cases, it's possible that I/O errors will cause the daemon to
time out on an operation.  Under these circumstances, vinum(8) will
automatically start another daemon.  Add a pid for the daemon, so that
an overtaken daemon will discover that it's no longer in favour, and
will crawl into a corner and die.
1999-02-11 06:42:39 +00:00
Greg Lehey
3f8d2678bc Remove some dead debug code
build_write_request: get the check for failure right
1999-02-05 05:09:22 +00:00
Greg Lehey
7f1050341c Change multiline comments to start with a lone /* and end with a */,
apparently in accordance with style(9).

Complained-about-by: bde
1999-01-29 01:17:54 +00:00
Greg Lehey
6fe15bff6e Change multiline comments to start with a lone /* and end with a */,
apparently in accordance with style(9).

Complained-about-by: bde

vinumopen: Change check for root user to a call to suser(9)
vinumclose: Remove check for root user.

Nitpicked-by: phk
1999-01-29 01:16:18 +00:00
Greg Lehey
bb1d6cfa3c build_write_request: only fail if all plexes are down, instead of if
any of them are down.

Reported-by: dg
1999-01-28 07:00:55 +00:00
Greg Lehey
a1c1b26d88 Fix some format breakage before bde finds out
vinum_scandisk: check not only drive error, but also drive state,
  before accessing the drive.

drivecmp: Remove warning messages by Backing out overly constant
  declarations in revision 1.9.
1999-01-28 06:59:27 +00:00
Matthew Dillon
b4e36adf1c Fix warnings preparing for -Wall -Wcast-qual
Also disable one usb module in LINT due to fatal compilation errors,
    temporary.
1999-01-27 20:09:21 +00:00
Greg Lehey
ac4cd383ca Correct #include in vinumioctl.c to compile correctly
without VINUMDEBUG

Submitted-by: peter
1999-01-24 05:14:39 +00:00
Peter Wemm
e5ca2df920 Minor tweak to fix 'pseudo-device vinum'. One of these got lost before,
the other is a new file.
1999-01-23 01:29:05 +00:00
Peter Wemm
013b59f2cb Remove stray Makefile that Greg initially imported. 1999-01-23 00:09:07 +00:00
Greg Lehey
33953e5e97 Include Peter Wemm's renaming and restructuring
Change from lkm to kld

Add field plexsdno to sd struct

Add flag VF_NEWBORN to drive, sd, plex and volume structs, indicating
that the object has just been created.

Add object types for raw (unattached) plexes and subdisks

Remove definitions of VOLNO, PLEXNO and SDNO (now functions Volno,
Plexno and Sdno)

Move revive parameters from struct plex to struct sd.

struct plex:
  maintain a count of the number of inaccessible subdisks.
  remove defective and unmapped regions.

Debug flags: make an enum (previously #define)

Set default revive block size to 64kB (was 32 kB)
1999-01-21 00:41:58 +00:00
Greg Lehey
5d6f3129b1 Retain some of the RAID5 texts even in the non-RAID5 versions.
Previously, accidentally starting the wrong version could corrupt
  the RAID5 configuration.

  Add functions Volno, Plexno and Sdno to replace the old defines
  VOLNO, PLEXNO and SDNO.
1999-01-21 00:41:31 +00:00
Greg Lehey
8a2cba6003 Remove states:
plex_reviving (now we revive subdisks)
  drive_coming_up (never happened)

Add state sd_reviving.
1999-01-21 00:40:50 +00:00
Greg Lehey
6d930639c3 Include Peter Wemm's renaming and restructuring
Change from lkm to kld

Serious rewrite.  No longer call set_<foo>_state to set the state
based only on other objects; instead, add functions
update_<foo>_state, which determine what the state should be by
themselves.  This allows the set_<foo>_state functions to shrink
enough to be almost intelligible.

Remove flags setstate_recurse and setstate_recursing.

Remove plex defective regions and unmapped regions, which were
maintained but not used.

Change code to allow daemon to perform operations formerly kludged
into an interrupt context.  Remove the DIRTYCONFIG kludge.
1999-01-21 00:40:32 +00:00
Greg Lehey
2178c45997 Change the style of revive: revive subdisks instead of plexes. This
makes it easier to keep track of which parts of a plex need reviving.

Use sdio, not vinumstrategy, to write to the subdisk.
1999-01-21 00:40:03 +00:00
Greg Lehey
7d077233f8 Include Peter Wemm's renaming and restructuring
Change from lkm to kld

Remove #ifdefs for FreeBSD 2.c

vinumstrategy:
  Support anonymous (`raw') subdisks and plexes.
  Change code to allow daemon to perform operations formerly kludged
  into an interrupt context.  Remove the DIRTYCONFIG kludge.

No longer set B_ORDERED for reviving subdisks.  I suspect this
wouldn't work correctly, and it should be done in a different manner
in vinumrevive.c

sdio: set subdisk state correctly on error
      start to remove code that doesn't make any sense any more.
1999-01-21 00:39:36 +00:00
Greg Lehey
09c265ba75 Add keywords help, makedev, quit and setdaemon 1999-01-21 00:39:01 +00:00
Greg Lehey
cb4547a333 MMalloc: remove directory part of name correctly 1999-01-21 00:37:56 +00:00
Greg Lehey
ba40e00009 Create functions lockdrive and unlockdrive to handle drive locking 1999-01-21 00:37:38 +00:00
Greg Lehey
216e9f2046 Add keywords makedev, setdaemon and help. 1999-01-21 00:37:18 +00:00
Greg Lehey
2f4e1ffa11 Remove ioctls VINUM_GETUNMAPPED and VINUM_GETDEFECTIVE (we no longer
have regions).

Add definitions for VINUM_DAEMON, VINUM_FINDDAEMON and VINUM_DAEMON
1999-01-21 00:36:21 +00:00
Greg Lehey
c3dff4f036 Include Peter Wemm's renaming and restructuring
Remove #ifdefs for FreeBSD 2.c

Change from lkm to kld

correct type of `flags' in calls to set_drive_state.

set_drive_parms: handle anonymous drives correctly (remove them)

drive VOP functions: use the PID of the original opener to fool the
lock manager.

open_drive: be quiet about failures (they're normal when scanning the
partitions).

close_drive: lock drive before closing.

remove_drive: lock drive before deallocating.

read_drive_label: set drive up when all is OK

check_drive:
  Complete rewrite.  Offload most of the code to the new
  vinum_scandisk

format_config:
  use snprintf and %qd options to make much less emetic.
  Remove old supporting functions.

vinum_scandisk:
  Moved here from vinum.c
  Almost complete rewrite, incorporating much of what was check_drive.
  We still don't have a general way to find the drives on a system, so
  get the user to supply the names via the `read' command.  For each
  device, try each possible compatibility slice name (there's a danger
  of finding both /dev/da1h and /dev/da0s1h otherwise).  Sort the
  partitions found in reverse order of last update time and read them
  in, setting the `update' parameter to parse_config and descendents.

save_config: rename to daemon_save_config, since the function is now
called by the daemon.  Create a new function save_config which queues
the request with the daemon.

daemon_save_config:  some mods to allow for the unfamiliar
environment.
1999-01-21 00:35:35 +00:00
Greg Lehey
a01fbbe4ac Include Peter Wemm's renaming and restructuring
Change from lkm to kld

Recover from I/O errors by passing the request to the daemon, except
for plex I/O, which is not fault tolerant.
1999-01-21 00:34:14 +00:00
Greg Lehey
3a85d3f98a Remove old cruft 1999-01-21 00:33:47 +00:00
Greg Lehey
76714993c6 Include Peter Wemm's renaming and restructuring
Change from lkm to kld

Remove BROKEN_GDB kludge (it's not needed with klds)

Add code for interfacing with daemon

Modify device minor number encoding, use selector functions which also
permit anonymous plexes and subdisks.

Remove code for 2.x support.

Change messages to omit obvious words like 'plex' and 'subdisk.

give_plex_to_volume: invalidate subdisks being given to a plex which
is part of a volume with other plexes.

give_sd_to_plex: keep track of plex size in all cases

lock drives before closing them, to keep the daemon from getting
confused.

config_drive: handle partition type errors more gracefully

config_subdisk: set subdisk state correctly

find_drive, find_drive_by_dev, find_subdisk, find_plex, find_volume:
  set VF_NEWBORN flag when a new object is created

config_drive:
  Handle partition_status returns more cleverly.
  Replace the device name in some cases where it got overwritten.

config_subdisk:
  add parameter `update'.  If the object already exists, exit without
  any changes.
  Set state correctly.

config_plex, config_volume:
  add parameter `update'.  If the object already exists, exit without
  any changes.

parse_config:
  move read function to vinum_scandisk.
  add parameter `update' to pass to config_<object>.

remove_<object>_entry:
  print a message when the object is removed.

update_plex_config:
  Start defusing this function, which will go away some time.
  Remove calls to update_volume_config.
  Make size 64 bits
1999-01-21 00:32:54 +00:00
Greg Lehey
2ef3e3ddbc Include Peter Wemm's renaming and restructuring
Change from lkm to kld
1999-01-21 00:31:59 +00:00
Greg Lehey
eb1cd79843 Code for vinum daemon. 1999-01-21 00:31:31 +00:00
Greg Lehey
fc4e325173 Include Peter Wemm's renaming and restructuring
Change from lkm to kld

Remove BROKEN_GDB kludge (it's not needed with klds)

Add code for interfacing with daemon

Modify manner of determining when module is idle

Modify device minor number encoding, use selector functions which also
permit anonymous plexes and subdisks.

Remove code for 2.x support.

Move vinum_scandisk to vinumio.c

Remove myproc kludge

Keep track of open volumes by flag, not by pid (the pids caused some
problems with the lock manager).

free_vinum:
  Remove unmapped and defective regions from plexes.
  Wait for daemon to stop before returning

vinumopen:
  Don't refuse an open if the volume is already open.
1999-01-21 00:30:52 +00:00
Greg Lehey
efd86c9a8c Reflect changes in vinumstate.h 1999-01-21 00:30:24 +00:00
Greg Lehey
7230cf7d2a Include Peter Wemm's renaming and restructuring
Change from lkm to kld

Add structures for daemon

Remove old cruft

Increase RQINFO_SIZE to 128
1999-01-21 00:29:44 +00:00
Greg Lehey
e743f211c1 Include the copyright notice in the script, making the file COPYRIGHT
unnecessary.
1999-01-21 00:29:20 +00:00
Greg Lehey
acf3160e71 Fix an overflow problem which prevented revive from working on plexes
of more than 4 GB.

Reported by: dg
1999-01-06 23:11:29 +00:00
Peter Wemm
c285ca1254 Some relatively minor tweaks to enable vinum to be built into a static
kernel as a pseudo-device.  The changes were:
- #ifdef DEBUG -> #ifdef VINUMDEBUG
- opt_vinum.h for holding above config variable
- Fixing up a few stray problems where DEBUG wasn't optional.
- config.c -> vinumconfig.c (there's already a config.o)
- Other *.c -> vinum*.c (wasn't strictly necessary, but done in case we end
  up with something else conflicting later on and we might have to have yet
  more repository copies of files).
- include file paths fixups..  (ie: get them all from the kernel tree
  instead of partly from the kernel and partly from /usr/include/machine)

I've spoken with Greg about this..  I hope this doesn't mess him around
too much..
1998-12-28 16:28:24 +00:00
Peter Wemm
ef2dbe9885 If I've done this right, revive the vinum code in it's now home after it
was savaged in the blood bath a few hours ago.
1998-12-28 04:56:24 +00:00
Søren Schmidt
c74cd3590f Remove LKM's depricated by modules. 1998-12-27 19:38:15 +00:00
Peter Wemm
5ebfc07dce Remove machine/cputypes.h - it's an i386 only thing 1998-11-06 01:34:06 +00:00
Greg Lehey
0b492c2b06 Remove some dead code and comments 1998-11-03 06:38:58 +00:00
Greg Lehey
44043daefc Print a warning if we removed a junked drive
Take a drive down if it's not open
1998-11-03 06:38:26 +00:00
Greg Lehey
8ef3d686c9 Take drive down if the disk driver tells us it's not there 1998-11-03 06:37:57 +00:00
Greg Lehey
62ae0ffa95 Check for duplicate subdisk names 1998-11-03 06:37:14 +00:00
Greg Lehey
c51cd25e95 Change some numeric #defines to enums 1998-11-02 04:11:16 +00:00
Greg Lehey
8b71433847 Don't close drives when called from interrupt context, set a flag for
the top half to do it.

Put in a dubious check for subdisk integrity when trying to bring
up a plex where others are already up.  This particular kludge is
crying out for a rewrite of the whole state code.

Add code to set_plex_state and set_volume_state to defer updates when
called from an interrupt context.  This doesn't happen yet, but it
could do.
1998-11-02 04:10:45 +00:00
Greg Lehey
d45fbfc7a1 Get the default revive blocksize right for striped and RAID-5 plexes 1998-11-02 04:10:19 +00:00
Greg Lehey
47ffaa06f1 Close any drives downed in an interrupt context.
Ensure correct order of requests.
Call launch_requests at splhigh to see if this stops the mysterious
SMP panics
1998-11-02 04:09:34 +00:00
Greg Lehey
f9fd1687b6 Accept incorrect device open counts, but print a warning
Don't save invalid drive config information, remove the drive
1998-11-02 04:09:09 +00:00
Greg Lehey
6e1f0e2f5e Check for maximum number of subdisks in a plex
Get object counts right when removing
1998-11-02 04:08:30 +00:00
Peter Wemm
a4bc95cff9 Move the kld stuff to here. 1998-10-23 11:49:47 +00:00
Greg Lehey
721fbc5ae0 config.c:
config_drive:
    Catch an instance of anonymous drives.  Doubtless many remain.

interrupt.c:
  complete_rqe:
    Call logrq to log iodone events if DEBUG_LASTREQS is set.

    Call set_sd_state with setstate_noupdate to avoid buffered I/O out
    of interrupt context.

    Use define DEBUG_RESID instead of constant.

memory.c:
  Remove dead expandrq() function

  Malloc:
    Remove directory component of file names in malloc table.

  Add function vinum_rqinfo (part of the request tracing stuff).

request.c:
  Add function logrq (part of the request tracing stuff).

  vinumstrategy:
    Check whether config needs to be written to disk, do it if so.
    This is a stopgap until the Vinum daemon (bacchusd?  oenologistd?)
    is written.

    If DEBUG_LASTREQS is set, call logrq to log user buffer headers.

  launch_requests:
    Correct format of debug output to console.

    If DEBUG_LASTREQS is set, call logrq to log request elements.

request.h:
  Add definitions for request trace.

state.c:
  set_sd_state:
    Check flags for setstate_noupdate.  If set, don't write the config
    to disk, just set global VF_DIRTYCONFIG flag.  This is part of the
    kludge to avoid writing config from an interrupt context.

vinumext.h:
    Add declaration for vinum_rqinfo, put inside #ifdef DEBUG
    Remove dead macro expandrq

vinumio.h:
  Increase maximum ioctl reply length to 4 kB if DEBUG is set.
  Define VINUM_RQINFO ioctl if DEBUG is set.

vinumioctl.c:
  vinumioctl:
    Change implementation of VINUM_DEBUG ioctl: use a debug flag
    (DEBUG_REMOTEGDB) to decide whether to go into remote debugging or
    not.

    Implement VINUM_RQINFO.

vinumkw.h:
  Define kw_info even when not debugging.

vinumvar.h:
  Define VF_DIRTYCONFIG
  Add pointers to request info to vinum_info if DEBUG is set.
  Define setstate_noupdate
  Define additional debug bits DEBUG_RESID, DEBUG_LASTREQS and
  DEBUG_REMOTEGDB.
1998-10-21 08:32:32 +00:00
Greg Lehey
759ae89394 Correct calculation of revive blocksize
Submitted by: Chris Csanady
1998-09-28 04:24:10 +00:00
Greg Lehey
02d719b0f5 Get include paths right 1998-09-28 04:21:20 +00:00
Greg Lehey
e4381fa521 Import base vinum lkm sources 1998-09-16 05:56:21 +00:00