Commit Graph

13 Commits

Author SHA1 Message Date
Dag-Erling Smørgrav
dc73342347 Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108. 1998-04-17 22:37:19 +00:00
Brian Somers
a512daba6c Correct $Id$ 1998-01-26 19:52:34 +00:00
Brian Somers
52ae741f38 Move softc stuff into if_tunvar.h
Suggested by: Peter Wemm <peter@netplex.com.au>
Hinted at by: Bruce Evans <bde@FreeBSD.org>


1998-01-11 17:52:33 +00:00
Bruce Evans
517c5ddbd3 Removed now-unused blocking mode flag. 1997-11-18 16:37:04 +00:00
Julian Elischer
1d389e50e0 As the Tunnel device has no real inherrent MRU limit,
so don't enforce the MTU as an MRU. Allow bidirectional ppp MTU
negotiation, by checking against a differnt figure for MRU.
Make it large enough for ATM frames at least.

Submitted by:   archie@whistle.com (archie cobbs)
1997-06-11 20:15:50 +00:00
Bill Fenner
c812f23a41 Change default tun MTU back to 1500.
Use the interface MTU instead of the constant when deciding what
	packets to accept.
Allow using the SIOCSIFMTU ioctl (e.g. "ifconfig tun0 mtu XXX") to
	set the MTU.
1996-12-16 19:23:34 +00:00
Julian Elischer
610600118c 2 small changes:
1/ increase the tun MTU from 1500 to 1600 to allow it to be used with
packets formatted according to RFC1490 and RFC1717

2/ allow the tsleep() when reading, to be interruptable by signals
so that one can now do:
od -xc </dev/tun0
to dump packets for debugging without getting hung.

Passed on by: Archie@whistle.com (archie Cobbs)

Nice but not neccessary in 2.2
1996-12-02 21:07:33 +00:00
Julian Elischer
a1153b1a69 Submitted by: archie@whistle.com
allow a tunnel interface to be openned even if it has no remote address yet.
this may be needed if you have used
route add default -interface tun0
where the remote end might not even HAVE a number (e.g. netcom links)
1996-08-09 22:57:06 +00:00
Andrey A. Chernov
f7163ba751 Make user-level PPP on-demand with dynamic IP actually work.
Story so fr:
1) PPP on-demand with static IP works.
2) PPP on-demand with dynamic IP says "Host is down" on any IP request
The problem is that tun driver check its READY state by *first* ifconfig address.
i.e.:
set ifaddr <addr> <addr2>
works (static IP) and
set ifaddr 0 <addr2>
not works (dynamic IP) because first address is equal 0.
Since tun is always POINTOPOINT interface, dst address is more meaningfull.
I change checking to second (dst) address in READY test.
PPP on-demand finally works.
1996-03-08 11:07:07 +00:00
Garrett Wollman
9b44ff2214 Clean up Ethernet drivers:
- fill in and use ifp->if_softc
	- use if_bpf rather than private cookie variables
	- change bpf interface to take advantage of this
	- call ether_ifattach() directly from Ethernet drivers
	- delete kludge in if_attach() that did this indirectly
1996-02-06 18:51:28 +00:00
Rodney W. Grimes
9b2e535452 Remove trailing whitespace. 1995-05-30 08:16:23 +00:00
Atsushi Murai
53c9f6c0c4 New user Process PPP based on iij-ppp0.94beta2.
o Supporting SYNC SIO device (But need a device driver)
     - add "set speed sync"
   o Fixing bug for Predictor-1 function.
   o Add new parameter that re-sent interval for set timeout commands.
   o Improving RTT (Round Trip Time) and reducing processor time.
     - Previous Timer service was using polling, and now using
       SIGALRM ;-)
     - A 0.94beta2 will not work correctly....

   -- Follows are additinal feature not including 0.94beta2
   o Support Proxy ARP
     - add "enable/disable proxy" commands
   o Marging common routine in CHAP/PAP.
   o Enhancing LCP/IPCP log information.
   o Support local Authfication connection on port 300x and tty.
     - You can set up pair of your "hostname -s" and
       password in ppp.secret. if either ppp.secret file nor
       your hostname line don't exist, It will notify a message
       and working as same as previous version.(Backword compatibility)
     - If you did set up them, It's allow connection but nothing to do
       except help and passwd command.
     - add "passwd yourpasswd" commands
   o Support afilter - keep Alive filter that a packet can send/receiving
     according to ifilter/ofilter but doesn't count it as preventing idle
     timer expires.
     - Same syntax of other filters.
   o Fixing bugs reported by current user for previous one. Thanks !!

Reviewed by: Atsushi Murai (amurai@spec.co.jp)
1995-02-26 12:18:08 +00:00
Atsushi Murai
b74038e18b 1995-01-31 06:15:49 +00:00