Commit Graph

208648 Commits

Author SHA1 Message Date
Alexander Motin
c85285a96b Don't check CmdSN for initial login request.
This fixes connection errors for some initiators not starting CmdSN
from zero.

While there, fix wrong status details reported for couple errors.

MFC after:	3 days
2016-02-12 10:58:13 +00:00
Konstantin Belousov
90edf67ecf POSIX states that #include <signal.h> shall make both mcontext_t and
ucontext_t available.  Our code even has XXX comment about this.

Add a bit of compliance by moving struct __ucontext definition into
sys/_ucontext.h and including it into signal.h and sys/ucontext.h.

Several machine/ucontext.h headers were changed to use namespace-safe
types (like uint64_t->__uint64_t) to not depend on sys/types.h.
struct __stack_t from sys/signal.h is made always visible in private
namespace to satisfy sys/_ucontext.h requirements.

Apparently mips _types.h pollutes global namespace with f_register_t
type definition.  This commit does not try to fix the issue.

PR:	207079
Reported and tested by:	Ting-Wei Lan <lantw44@gmail.com>
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2016-02-12 07:38:19 +00:00
Konstantin Belousov
411c83ccd6 If full width writes to the performance monitoring counters are
supported, use full-width aliases MSRs for writes.  This fixes the
"[pmc,X] negative increment" assertion on the context switch when
clipped counter value is sign-extended.

Add definitions for the MSR IA32_PERF_CAPABILITIES needed to detect
the feature.

PR:	207068
Submitted by:	joss.upton@yahoo.com
MFC after:	2 weeks
2016-02-12 07:27:24 +00:00
Konstantin Belousov
70c1d5a32a Adjust the size of PMC_DEFAULT_DEBUG_FLAGS to match the size of the
structure.

PR:	207068
Submitted by:	joss.upton@yahoo.com
MFC after:	2 weeks
2016-02-12 07:20:27 +00:00
Konstantin Belousov
0c8cc7b076 Remove tautological cast.
PR:	207068
Submitted by:	joss.upton@yahoo.com
MFC after:	2 weeks
2016-02-12 07:19:59 +00:00
Michal Meloun
3c7b90774d UART: Fix spurious interrupts generated by ns8250 and lpc drivers:
- don't enable transmitter empty interrupt before filling TX FIFO.
 - add missing uart_barrier() call in interrupt service routine
2016-02-12 05:14:58 +00:00
Devin Teske
4b9a5d61f2 Comments and fix small bug
Reduce differences between jib/jng and fix a bug that would prevent
additional interfaces from being created if the first of many already
existed (counter wasn't incremented before calling only continue).
2016-02-12 02:53:44 +00:00
Devin Teske
4fa10b673c Interpret vnet_interface/vnet.interface as array 2016-02-12 02:50:36 +00:00
Devin Teske
1ccea30f71 Add syntax to disable MAC allocation
Adding `!' before an interface name will disable MAC allocation, falling
back to driver mechanics. Alternatively adding `=' before an interface name
causes the MAC address to be cloned (for ng_bridge(4) back-end only). While
here, disable the auto-detection of wlan* since this knocks the host off;
requiring the host that defines the jail to explicitly enable this feature
by preceding the interface with `='.
2016-02-12 01:41:40 +00:00
Devin Teske
78954c3be3 Refactor conversion to hex 2016-02-12 01:12:44 +00:00
Michael Tuexen
e51963a7bb Loopback addresses are 127.0.0.0/8, not 127.0.0.1/32.
MFC after: 1 week
2016-02-11 22:29:39 +00:00
Devin Teske
b35d45aadf Add support for bridging iwn(4) based wlan(4)
Documented in iwn(4), "Only one virtual interface may be configured at any
time." However, netgraph with a cloned MAC address is able to communicate
over an ng_eiface attached to an ng_bridge linked to the wlan(4) interface.
While here, introduce syntax to specify the MAC address is to be cloned if
the named interface begins with equals [=].
2016-02-11 22:10:54 +00:00
Gleb Smirnoff
5e4bc63b7c o Gather all mbuf(9) allocation functions into kern_mbuf.c, and all
mbuf(9) manipulation functions into uipc_mbuf.c.  This looks like
  the initial intent, but had diffused in the last decade.

o Gather all declarations in mbuf.h in one place and sort them.

o Uninline m_clget() and m_cljget().

There are no functional changes in this patch.

The patch comes from a larger version, where all mbuf(9) allocation was
uninlined, which allowed to make mbuf(9) UMA zones private to kern_mbuf.c.
The performance impact of the total uninlining is still unclear, so we
are holding on now with larger version.

Together with:	melifaro, olivier
2016-02-11 21:32:23 +00:00
Devin Teske
7e4b7c797a Centralize MAC derivation formula 2016-02-11 21:28:34 +00:00
Devin Teske
e0c45153ac Add example VIMAGE config required by vnet jails 2016-02-11 18:37:02 +00:00
Michael Tuexen
b028cf319e Use 4 spaces instead of a tab. 2016-02-11 18:35:46 +00:00
Andrew Turner
77fc1120a7 Enable ARM_INTRNG on all kernel configs where we use the Generic Interrupt
Controller.

Sponsored by:	ABT Systems Ltd
2016-02-11 18:01:10 +00:00
Dag-Erling Smørgrav
a982c4c7f5 Fix double-free error: r289419 moved all error handling in http_connect()
to the end of the function, but did not remove a fetch_close() call which
was made redundant by the one in the shared error-handling code.

PR:		206774
Submitted by:	Christian Heckendorf <heckendorfc@gmail.com>
MFC after:	3 days
2016-02-11 17:48:15 +00:00
Dag-Erling Smørgrav
0de4f1bf64 Use the new insecure-lan-zones option instead of listing each AS112 zone
separately.

MFC after:	3 days
2016-02-11 17:37:02 +00:00
Dag-Erling Smørgrav
8232a681f5 Remove unbound-contrl-setup since we use a local control socket which
does not require keys.

MFC after:	3 days
Relnotes:	yes
2016-02-11 17:33:55 +00:00
Jim Harris
7b036d7790 nvme: avoid duplicate SET_NUM_QUEUES commands
nvme(4) issues a SET_NUM_QUEUES command during device
initialization to ensure enough I/O queues exists for each
of the MSI-X vectors we have allocated.  The SET_NUM_QUEUES
command is then issued again during nvme_ctrlr_start(), to
ensure that is properly set after any controller reset.

At least one NVMe drive exists which fails this second
SET_NUM_QUEUES command during device initialization.  So
change nvme_ctrlr_start() to only issue its SET_NUM_QUEUES
command when it is coming out of a reset - avoiding the
duplicate SET_NUM_QUEUES during device initialization.

Reported by:	gallatin
MFC after:	3 days
Sponsored by:	Intel
2016-02-11 17:32:41 +00:00
Dag-Erling Smørgrav
e24c5f9706 Apply upstream r3619, r3620, r3621: add insecure-lan-zone option 2016-02-11 17:25:12 +00:00
Devin Teske
41c0ec9a16 Merge SVN r295220 (bz) from projects/vnet/
Fix a panic that occurs when a vnet interface is unavailable at the time the
vnet jail referencing said interface is stopped.

Sponsored by:	FIS Global, Inc.
2016-02-11 17:07:19 +00:00
Andrew Turner
34096f3c06 Include the correct header to get a phandle_t needed by ofw_bus_if.h. While
here only include opt_platform.h once.

Sponsored by:	ABT Systems Ltd
2016-02-11 16:43:23 +00:00
Pedro F. Giffuni
a633908d21 Ext4: Use boolean type instead of '0' and '1'
There are precedents of uses of bool in the kernel and
it is incorrect style to use integers as replacement for
a boolean type.
2016-02-11 15:27:14 +00:00
Ed Maste
b2390166cd Explain that boot1.efi prefers ZFS over UFS
Reported by:	smh
2016-02-11 14:45:18 +00:00
Ruslan Bukin
cfddfe4cd5 o Move non-generic kernel configuration out from GENERIC.
o Add kernel configuration for QEMU.

Both SPIKE and QEMU kernel configs are temporary (until
we will be able to obtain DTB from loader).

Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-02-11 13:28:52 +00:00
Justin Hibbits
64a982ea56 Migrate the PTE format for book-e to standardize on the 'indirect PTE' format
Summary:
The revised Book-E spec, adding the specification for the MMUv2 and e6500,
includes a hardware PTE layout for indirect page tables.  In order to support
this in the future, migrate the PTE format to match the MMUv2 hardware PTE
format.

Test Plan: Boot tested on a P5020 board.  Booted to multiuser mode.

Differential Revision: https://reviews.freebsd.org/D5224
2016-02-11 13:15:37 +00:00
Zbigniew Bodek
6cd36342c0 Support interrupts binding in GICv3 and ITS
- Add MOVI command and routine for the LPI migration
- Allow to search for the ITS device descriptor using
  not only devID but also LPI number.
- Bind SPIs in the Distributor
- Don't bind its_dev to collection. Keep track of the collection
  IDs for each LPI.

Reviewed by:   wma
Obtained from: Semihalf
Sponsored by:  Cavium
Differential Revision: https://reviews.freebsd.org/D5231
2016-02-11 12:04:58 +00:00
Zbigniew Bodek
907a0579aa Implement finer locking in ITS
- Change locks' names to be more suitable
- Don't use blocking mutex. Lock only basic operations such
  as lists or bitmaps modifications.

Reviewed by:   wma
Obtained from: Semihalf
Sponsored by:  Cavium
Differential Revision: https://reviews.freebsd.org/D5230
2016-02-11 12:03:11 +00:00
Zbigniew Bodek
47a1ff355e Initially bind all interrupts to the boot CPU when using GICv3
This should be done by routing all interrupts to CPU0,
different assignment will be induced by either interrupts
shuffling or bus_bind_intr().

Reviewed by:   wma
Obtained from: Semihalf
Sponsored by:  Cavium
Differential Revision: https://reviews.freebsd.org/D5229
2016-02-11 12:01:33 +00:00
Zbigniew Bodek
55bdcadded Call pmc_hook() correctly in the ARM64 interrupt handler
pmc_hook() was called only in case of the stray interrupt but should
rather be called on each interrupt. Move in to the arm_cpu_intr()
handler, out of the critical section too.

Reviewed by:   br
Obtained from: Semihalf
Sponsored by:  Cavium
Differential Revision: https://reviews.freebsd.org/D5161
2016-02-11 11:59:32 +00:00
Zbigniew Bodek
be7aab76ec Introduce bus_bind_intr method for ARM64
It can be used to bind specific interrupt to a particular CPU.
Requires PIC support for interrupts binding.

Reviewed by:   wma
Obtained from: Semihalf
Sponsored by:  Cavium
Differential Revision: https://reviews.freebsd.org/D5122
2016-02-11 11:58:27 +00:00
Zbigniew Bodek
513411c9f5 Fix bugs in interrupts allocation on ARM64
Separate interrupt descriptors lookup from allocation. It was possible
to perform config on non-existing interrupt simply by allocating spurious
descriptor.
Must lock the interrupt descriptors table lookup to avoid mismatches.
This ought to prevent trouble while setting up new interrupt
and dispatching existing one.
Use spin mutex rather than sleep mutex. This is mainly due to lock in
arm_dispatch_intr.
This should be eventually changed to a lock-less solution without
walking through a linked list on each interrupt.

Reviewed by:   andrew, wma
Obtained from: Semihalf
Sponsored by:  Cavium
Differential Revision: https://reviews.freebsd.org/D5121
2016-02-11 11:57:13 +00:00
Roger Pau Monné
8f28a42ee7 xen-netfront: remove useless NULL check in netif_free
xn_ifp is allocated in create_netdev with if_alloc(IFT_ETHER).
According to the current arrangement it can't be NULL.

Coverity ID:		1349805
Submitted by:		Wei Liu <wei.liu2@citrix.com>
Reviewed by:		royger
Sponsored by:		Citrix Systems R&D
Differential revision:	https://reviews.freebsd.org/D5252
2016-02-11 11:57:12 +00:00
Zbigniew Bodek
8133eda921 Minor clean-ups for ARM64 GICv3 and GIC drivers
GICv3:
- move ICC_SGI1R_EL1 definitions to armreg.h and use proper system
  register's names
GIC:
- remove unused functions

Reviewed by:   andrew
Obtained from: Semihalf
Sponsored by:  Cavium
Differential Revision: https://reviews.freebsd.org/D5119
2016-02-11 11:55:37 +00:00
Roger Pau Monné
d4dae2b1fb xen-netfront: rearrange error paths in setup_txqs
Coverity spotted double free errors in error path. Fix that by
removing the extraneous calls.

Coverity ID:		1349798
Submitted by:		Wei Liu <wei.liu2@citrix.com>
Reviewed by:		royger
Sponsored by:		Citrix Systems R&D
Differential revision:	https://reviews.freebsd.org/D5251
2016-02-11 11:53:32 +00:00
Roger Pau Monné
7803499440 xen-netfront: remove pointless assignment in xn_ioctl
The variable error is assigned to 0 before entering the switch.
Assigning error to 0 before break pointless rewrites the real error
value that should be returned.

Coverity ID:		1304974
Submitted by:		Wei Liu <wei.liu2@citrix.com>
Reviewed by:		royger
Sponsored by:		Citrix Systems R&D
Differential revision:	https://reviews.freebsd.org/D5250
2016-02-11 11:50:31 +00:00
Andrew Turner
647a3bac7e Stop defining fdt_pic_table when building for ARM_INTRNG. 2016-02-11 11:49:27 +00:00
Ruslan Bukin
2150fb09b9 Stop device enumeration when we see first empty slot.
This fixes operation in QEMU and saves some booting time as well.

Pointed out by:	Sagar Karandikar <skarandikar@berkeley.edu>
Sponsored by:	DARPA, AFRL
Sponsored by:	HEIF5
2016-02-11 11:21:45 +00:00
Andrew Turner
75d36854d4 Remove unused Zedboard config files. files.zedboard was empty other than
comments, and std.zedboard just pointed to files.zedboard and std.xilinx.
2016-02-11 10:48:15 +00:00
Hans Petter Selasky
3e9470b721 Use a pair of ifs when comparing the 32-bit flowid integers so that
the sign bit doesn't cause an overflow. The overflow manifests itself
as a sorting index wrap around in the middle of the sorted array,
which is not a problem for the LRO code, but might be a problem for
the logic inside qsort().

Reviewed by:		gnn @
Sponsored by:		Mellanox Technologies
Differential Revision:	https://reviews.freebsd.org/D5239
2016-02-11 10:03:50 +00:00
Wojciech Macek
c7fc655f3f ARM64 disassembler: support for LDR instructions
Implemented disassembly for a whole bunch of
    various ldr instructions.

Obtained from:         Semihalf
Sponsored by:          Cavium
Approved by:           cognet (mentor)
Reviewed by:           zbb
Differential revision: https://reviews.freebsd.org/D5217
2016-02-11 06:50:11 +00:00
Adrian Chadd
314d3ca236 Make bus_space_generic properly map/unmap memory (using pmap_mapdev and
pmap_unmapdev respectively) so that resources are properly managed.

This is work originally done by kan@.  Stanislav picked it up as part
of his Mediatek SoC work.

Tested:

* Carambola2, AR933x SoC

Submitted by:	Stanislav Galabov <sgalabov@gmail.com>
Reviewed by:	kan
Differential Revision:	https://reviews.freebsd.org/D5184
2016-02-11 06:24:34 +00:00
Adrian Chadd
6d525d0af8 Migrate the other MIPS24K SoC cores to use the CPU_MIPS24K option. 2016-02-11 06:23:02 +00:00
Adrian Chadd
67a2f29041 Missing commit - remove MIPS fdt bus space.
Differential Revision:	https://reviews.freebsd.org/D5184
2016-02-11 06:19:58 +00:00
Adrian Chadd
7519c628d3 Remove bus space fdt for MIPS.
This was originall done by kan@.

Submitted by:	Stanislav Galabov <sgalabov@gmail.com>
Reviewed by:	kan
Differential Revision:	https://reviews.freebsd.org/D5184
2016-02-11 06:19:32 +00:00
Adrian Chadd
055ddb0304 Convert MIPS nexus and mips_pic to BUS_PASS
Submitted by:	Stanislav Galabov <sgalabov@gmail.com>
Reviewed by:	kan
Differential Revision:	https://reviews.freebsd.org/D5196
2016-02-11 06:15:43 +00:00
Adrian Chadd
4d125f57e1 Teach the MIPS ticker to attach itself properly when using INTRNG.
Submitted by:	Stanislav Galabov <sgalabov@gmail.com>
Reviewed by:	kan
Differential Revision:	https://reviews.freebsd.org/D5183
2016-02-11 06:13:53 +00:00
Adrian Chadd
9a8d0c1f0c Begin the MIPS_INTRNG support.
This is a prelude to intr-ng support for MIPS boards that need it -
notably the CI20 port from kan@ that's upcoming, but also work that
Stanislav is doing for the Mediatek platforms.

This is the initial platform dependent bits in include/intr.h, some
#defines for the nexus code for the intrng initialisation/runtime
bits, some changed naming (which I'll fix later to be the same, much
like what I did for ARM intr-ng) in exception.S, and the first cut
at a PIC.

Stanislav and I refactored out the common code for intrng support,
so the mips intrng definitions are quite small (sys/mips/include/intr.h.)

This is all work done by kan@, which stanislav has been cherry picking
into common code for his mediatek chipset work.

Tested:

* Carambola2 - no regressions (not intr-ng though!)

Submitted by:	Stanislav Galabov <sgalabov@gmail.com>
Reviewed by:	kan (original author)
Differential Revision:	https://reviews.freebsd.org/D5182
2016-02-11 06:09:27 +00:00