This allows one to enable DTrace probes relatively early during boot,
during SI_SUB_DTRACE_ANON, before dtrace(1) can invoked. The desired
enabling is created using dtrace -A, which writes a /boot/dtrace.dof
file and uses nextboot(8) to ensure that DTrace kernel modules are loaded
and that the DOF file describing the enabling is loaded by loader(8)
during the subsequent boot. The trace output can then be fetched with
dtrace -a.
With this commit, boot-time DTrace is only functional on i386 and amd64: on
other architectures, the high-resolution timer frequency is initialized
during SI_SUB_CLOCKS and is thus not available when the anonymous
tracing state is initialized. On x86, the TSC is used and is thus available
earlier.
MFC after: 1 month
Relnotes: yes
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Author: Will Andrews <will@firepipe.net>
Closes#83Closes#32openzfs/openzfs@9663688425
FreeBSD already had `zpool labelclear` functionality, so this is mostly
just a diff reduction.
MFC after: 1 month
Previously this operation tried to unmount and remount children.
Also see https://www.illumos.org/issues/6428.
MFC after: 2 weeks
X-Needs-Upstreaming: illumos
When force-receiving a filesystem that was already mounted the re-created
filesystem is mounted despite -u flag.
Also see https://www.illumos.org/issues/6412.
PR: 204705
Tested by: Vladimir Krstulja <vlad-fbsd@acheronmedia.com>
MFC after: 2 weeks
X-Needs-Upstreaming: illumos
6739 userland version of cv_timedwait_hires() always assumes absolute time
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: George Wilson <george.wilson@delphix.com>
illumos/illumos-gate@41c6413cb5
calloc(3) is faster and occasionally safer than malloc(3) + bzero(3).
In one case, pointed out by Mark[1], this also cleans up a calculation.
Reviewed by: markj [1]
MFC after: 1 week
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Joshua M. Clulow <jmc@joyent.com>
illumos/illumos-gate@b211eb9181
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Gerhard Roethlin <git@the-color-black.net>
illumos/illumos-gate@cb605c4d8a
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Igor Kozhukhov <ikozhukhov@gmail.com>
illumos/illumos-gate@c16bcc4577
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@97e8130957
Currently, zfs(8) and zpool(8) print "invalid type '(null)'" or similar
messages, if you pass in invalid types, sources or column names for "zfs
get", "zfs list" and "zpool get". This is because the commands use
getsubopt(3), and in case of failure, they print 'value', which is NULL
when sub options don't match.
They should print 'suboptarg' instead, which is the documented way to
get at the non-matching sub option value.
Reviewed by: smh
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D5365
exceeds refquota
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
Author: Dan McDonald <danmcd@omniti.com>
illumos/illumos-gate@5878fad70d
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Paul Dagnelie <pcd@delphix.com>
illumos/illumos-gate@68ecb2ec93
This allows to do a full (non-incremental send) and receive it as a clone
of an existing dataset. It can leverage nopwrite to share blocks with the
origin. This can be used to change the relationship of datasets on the
target. For example, maybe on the source you have:
A ---- B ---- C
And you have sent to the target a full of B, and the incremental B->C:
B ---- C
You later realize that you want to have A on the target. You will have to
do a full send of A, but nopwrite can save you space on the target if you
receive it as a clone of B, assuming that A and B have some blocks inxi
common:
B ---- C
\
A
If the zfs module is not present and not loadable, report an error
to the user instead of crashing
Reviewed by: mahrens
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D4691
r281257 added support for lazyload mode by allowing dtrace(1) to register
a DOF section on behalf of a traced process. This was implemented by
having libdtrace copy the DOF section into a heap-allocated buffer and
passing its address to the ioctl handler. However, DTrace uses the DOF
section address as a lookup key in certain cases, so the ioctl handler
should be given the target process' DOF section address instead. This
change modifies the ADDDOF handler to copy the DOF section in from the
target process, rather than from dtrace(1).
Fix zfs(8) not formatting due to wrong macro (Oc) in the syntax for the new
zfs set multiple dataset properties option.
PR: 204631
Submitted by: Thomas Eberhardt
Sponsored by: Multiplay
Previously, the parameters of 'zfs holds' could only be snapshots
Add -d <depth> flag to limit depth of recursion
Add -p flag to print literal values, rather than interpreted values
Add -H flag to suppress header output and use tabs rather than whitespace
Reviewed by: mahrens, smh, dteske
Approved by: bapt (mentor)
MFC after: 3 weeks
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3994
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: John Wren Kennedy <john.kennedy@delphix.com>
illumos/illumos-gate@52244c0958
In fact, only unrelated part of that commit is applicable:
8. zpool list -v doesn't print spares
It also doesn't correctly identify log devices.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Albert Lee <trisk@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Alexander Eremin <a.eremin@nexenta.com>
illumos/illumos-gate@8430278980
5561 support root pools on EFI/GPT partitioned disks
5125 update zpool/libzfs to manage bootable whole disk pools (EFI/GPT labeled disks)
Reviewed by: Jean McCormack <jean.mccormack@nexenta.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
illumos/illumos-gate@1a902ef862
This is NOP changes for FreeBSD.
updated for large block support.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Joe Stein <joe.stein@delphix.com>
illumos/illumos-gate@e9316f7696
to illumos-gate 13967:92bec6d87f59
Illumos ZFS issues:
3557 dumpvp_size is not updated correctly when a dump zvol's size is
changed
3558 setting the volsize on a dump device does not return back ENOSPC
3559 setting a volsize larger than the space available sometimes succeeds
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Reviewed by: Richard PALO <richard@NetBSD.org>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Rich Lowe <richlowe@richlowe.net>
Author: Chris Williamson <chris.williamson@delphix.com>
illumos/illumos-gate@30925561c2
4185 add new cryptographic checksums to ZFS: SHA-512, Skein, Edon-R
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@45818ee124
This is only a partial merge of respective ZFS infrastructure changes.
At this moment FreeBSD kernel has no those crypto algorithms, so the
parts of the code to enable them are commented out. When they are
implemented, it will be trivial to plug them in.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@9c3fd1216f
For more info, see:
- slides http://www.slideshare.net/MatthewAhrens/openzfs-send-and-receive
- video https://www.youtube.com/watch?v=iY44jPMvxog
- manpage changes (for zfs resume -s and zfs send -t)
- upcoming talk at the OpenZFS Developer Summit
The TL;DR is:
Use "zfs receive -s" to save the partially received state on failure.
On failure, get the receive token with "zfs get receive_resume_token <fs>"
Resume the send with "zfs send -t <token_value>"
Relnotes: yes
Previously, lockstat(1) would use a lock's address as its identifier when
consuming data describing lock contention and hold events. After collecting
the requested data, it would use ksyms(4) to resolve lock addresses to
names. Of course, this doesn't work too well for locks contained in
dynamically-allocated memory. This change modifies lockstat(1) to trace the
lock names obtained from the base struct lock_object instead, leading to
output that is generally much more useful.
This change also removes the -c option, which is used to coalesce data for
locks in an array. It's not possible to support this option without also
tracing lock addresses, and since lock arrays in which the lock names are
distinct are not very common in FreeBSD, it's simpler to just remove the
option.
Reviewed by: avg (earlier revision)
Differential Revision: https://reviews.freebsd.org/D3661
(userland portion that was not merged in r286677)
Update zdb to also print ltime, type, and level information
for these new style holes. Previously, only the logical birth
time would be printed.
This change reduces compiler warnings by removing duplicate defines
Line numbers are from r168404 (and r284648)
#define lbolt: lines 384 and 459 (531 and 648) (original was renamed later)
#define lbolt64: lines 385 and 460 (532 and 649) (original was renamed later)
#define gethrestime_sec: lines 390 and 465 (540 and 653)
uint64_t physmem: lines 402 and 463 (561 and 651)
Reviewed by: smh, delphij
Approved by: bapt (mentor)
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D2878
some ctfmerge crashes that started to occur on i386 weeks after r274569 was
committed. Some later investigation indicated that the crashes were caused
by malformed CTF info that led to a stack overflow. The issue with CTF
info in i386 kernels seems to have been resolved by r261246, which updated
libdwarf and libelf.
r274569 fixes a bug which caused duplicate types to appear in the kernel's
CTF info. This duplication generally does not cause problems when using
DTrace, but makes it easier to hit the limit of 2^15 - 1 distinct type
definitions in a CTF container.
MFC after: 2 weeks