Commit Graph

142 Commits

Author SHA1 Message Date
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Peter Wemm
4fdff1649a GC unused #define id_physid id_scsiid 1999-05-08 18:13:15 +00:00
Poul-Henning Kamp
46eede0058 Continue where Julian left off in July 1998:
Virtualize bdevsw[] from cdevsw.  bdevsw() is now an (inline)
        function.

        Join CDEV_MODULE and BDEV_MODULE to DEV_MODULE (please pay attention
        to the order of the cmaj/bmaj arguments!)

        Join CDEV_DRIVER_MODULE and BDEV_DRIVER_MODULE to DEV_DRIVER_MODULE
        (ditto!)

(Next step will be to convert all bdev dev_t's to cdev dev_t's
before they get to do any damage^H^H^H^H^H^Hwork in the kernel.)
1999-05-07 10:11:40 +00:00
Poul-Henning Kamp
c48d17750f Introduce two functions: physread() and physwrite() and use these directly
in *devsw[] rather than the 46 local copies of the same functions.

(grog will do the same for vinum when he has time)
1999-05-07 07:03:47 +00:00
Poul-Henning Kamp
b0eeea2042 remove b_proc from struct buf, it's (now) unused.
Reviewed by:	dillon, bde
1999-05-06 20:00:34 +00:00
Peter Wemm
edfdec1910 Disable FDC_YE - it's broken at present (breaking LINT) and awaiting some
pccard fixups.
Make DEVFS compile, it breaks LINT.
1999-05-02 20:38:08 +00:00
Poul-Henning Kamp
f711d546d2 Suser() simplification:
1:
  s/suser/suser_xxx/

2:
  Add new function: suser(struct proc *), prototyped in <sys/proc.h>.

3:
  s/suser_xxx(\([a-zA-Z0-9_]*\)->p_ucred, \&\1->p_acflag)/suser(\1)/

The remaining suser_xxx() calls will be scrutinized and dealt with
later.

There may be some unneeded #include <sys/cred.h>, but they are left
as an exercise for Bruce.

More changes to the suser() API will come along with the "jail" code.
1999-04-27 11:18:52 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Peter Wemm
2ada239c12 Use reference counted PHOLD/PRELE rather than the P_PHYSIO flag. 1999-04-06 03:06:51 +00:00
Kenneth D. Merry
2a888f938e Add a prioritization field to the devstat_add_entry() call so that
peripheral drivers can determine where in the devstat(9) list they are
inserted.

This requires recompilation of libdevstat, systat, vmstat, rpc.rstatd, and
any ports that depend on the devstat code, since the size of the devstat
structure has changed.  The devstat version number has been incremented as
well to reflect the change.

This sorts devices in the devstat list in "more interesting" to "less
interesting" order.  So, for instance, da devices are now more important
than floppy drives, and so will appear before floppy drives in the default
output from systat, iostat, vmstat, etc.

The order of devices is, for now, kept in a central table in devicestat.h.
If individual drivers were able to make a meaningful decision on what
priority they should be at attach time, we could consider splitting the
priority information out into the various drivers.  For now, though, they
have no way of knowing that, so it's easier to put them in an easy to find
table.

Also, move the checkversion() call in vmstat(8) to a more logical place.

Thanks to Bruce and David O'Brien for suggestions, for reviewing this, and
for putting up with the long time it has taken me to commit it.  Bruce did
object somewhat to the central priority table (he would rather the
priorities be distributed in each driver), so his objection is duly noted
here.

Reviewed by:	bde, obrien
1999-02-10 00:04:13 +00:00
Peter Wemm
d17e4ee67d Update the pccard hooks to use a module style declaration instead. 1999-01-19 00:21:53 +00:00
Bruce Evans
e93e63cb39 Fixed corruption of the fd buffer queue. Once upon a time, the active
buffer had to be left on the head of the queue for [bufq]disksort()
to sort against.  This isn't right for devices that can support multiple
active i/o's, and only the fd driver did it.  "Fixing" this in rev.1.36
of ufs_disksubr.c broke the fd driver in much the same way as rev.1.52
of <sys/buf.h> broke it (see rev.1.119).

Bug reported and fix tested by:	dt
1999-01-15 09:15:27 +00:00
Poul-Henning Kamp
fc47545ec3 Pre 3.0 branch cleanup casualty #6: ft 1998-12-27 13:40:57 +00:00
Bruce Evans
ff9607b070 Fixed LINT breakage in previous commit. Option FDC_YE enabled a
syntax error.  Options FDC_YE and DEVFS together enabled references
to a nonexistent variable and calls of a nonexistent function.
1998-12-14 16:29:58 +00:00
Warner Losh
69acd21dfd Add support for the YE-Data external PCMCIA floppy driver. This
floppy is used on the toshiba Libretto line of subnotebook computers.
It differs from a normal floppy in that you must use PIO rather than
DMA to transfer the data.

To enable this, you must add options "FDC_YE" to your kernel.  I don't
have a machine that has a floppy and a pcmcia slot to test to make
sure that this doesn't impact normal floppy units, so I've left this as
an option.

I have ported this to -current and made an attempt to ensure that the
indentation conforms to style(9), aka the bruce filter.

Reviewed by:	nate, markm
Submitted by:	David Horwitt (dhorwitt@ucsd.edu)
1998-12-12 08:16:01 +00:00
Eivind Eklund
2ae353f9a7 Rename one of the two devfs_link's to devfs_makelink. 1998-12-10 19:57:01 +00:00
Archie Cobbs
f1d19042b0 The "easy" fixes for compiling the kernel -Wunused: remove unreferenced static
and local variables, goto labels, and functions declared but not defined.
1998-12-07 21:58:50 +00:00
Archie Cobbs
2127f26023 Examine all occurrences of sprintf(), strcat(), and str[n]cpy()
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.

These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.

Reviewed by:	Bruce Evans <bde@zeta.org.au>
Reviewed by:	Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by:	Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00
Bruce Evans
fe310de802 Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c.  Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato
1998-10-22 05:58:45 +00:00
Justin T. Gibbs
9f02ad6073 Nuke uninitialized varible fd from retrier(). Change the devstat code
to reference fdc->fd instead.
1998-09-15 22:07:24 +00:00
Justin T. Gibbs
b2dfb1f906 Update system to new device statistics code.
Submitted by:	"Kenneth D. Merry" <ken@plutotech.com>
		mike@smith.net.au (Mike Smith)
1998-09-15 08:15:30 +00:00
Søren Schmidt
d024c95599 Remove the SLICE code.
This clearly needs alot more thought, and we dont need this to hunt
us down in 3.0-RELEASE.
1998-09-14 19:56:42 +00:00
Bruce Evans
5c1a1eae83 Fixed error handling:
- Call isa_dmadone() whenever necessary to stop DMA and/or free bounce
  buffers.  Undead DMA corrupted the malloc freelist fairly consistently
  in the following configuration: SLICE kernel, 2 floppy drives, no disk
  in fd0, disk in fd1.
- Don't call fdc_reset() from fd_timeout().  Doing so gave an "extra"
  interrupt which was usually misinterpreted as being for completion
  of the next FDC command; the interrupt for completion of the next
  FDC command was then usually misinterpreted...  There were further
  complications for interrupts latched by the soft-spl mechanism so
  that they were delivered after all the h/w interrupts went away.
  This caused at least wrong head settle delays and may be why the
  FreeBSD floppy driver seems to munch floppies more than most floppy
  drivers.  The reset was unnecessary anyway in cases that didn't have
  the bug described next, since is was repeated a little later for
  the IOTIMEDOUT state.  The state machine has complications to handle
  resets correctly, so just use it.
- Don't call retrier() from fd_timeout().  The IOTIMEDOUT state needs
  to be processed next, and it isn't valid to set to that state if
  retrier() has aborted the current transfer.  Doing so caused null
  pointer panics after the previous bug was fixed.

Improved error handling:
- If an i/o is aborted, arrange to reset in the state machine before
  doing the next i/o.  New fdc flag for this.  This fixes spurious
  warnings and lengthy busy-waiting for the next i/o.
- Split STARTRECAL into RESETCOMPLETE and STARTRECAL and only check
  for the results from reset if we actually reset.  This fixes spurious
  warnings for other paths to STARTRECAL.  [Oops, it may break reset
  handling for motor-off resets.]

Cleanups in fd_timeout():
- Renamed to fd_iotimeout() to make it clearer that it is only used
  for i/o.
- Don't handle the bp == 0 case.  This case can't happen for i/o.
- Don't check for controller-busy.  We know it must be.
- Don't print anything.  retrier() already prints too much for normal
  errors.
- Fudge the state differently so that the state machine advances
  fdc->retry and the status is invalid (perhaps this should fudge a
  valid state like the one for WP).
- Style fixes.
1998-07-29 13:00:42 +00:00
Bruce Evans
e5d7d24361 Fixed error handling after a seek error that can't happen. When the
controller reports a successful seek, it is very unlikely to report
seeking to a cylinder other than the one requested, but we check for
this, and botched the error handling for the requested_cylinder != 0
case.  This error happened when the bug fixed in rev.1.52 of <sys/buf.h>
caused the head of buffer queue to change to one starting on a different
cylnder - the requested cylinder was found, but it wasn't what we
thought we requested.  The fix is simply to arrange to reset the state
machine.

Corruption of the buffer queue seems to only have been a problem in the
floppy driver.  Other drivers dequeue the head of the queue before doing
physical i/o on it, so the corruption at worse broke the elevator sort
order.  Dequeueing breaks it anyway.
1998-07-18 03:15:33 +00:00
Bruce Evans
29d6b96d69 The ioctl request arg is unsigned long, so don't attempt to pass it
around as signed int.
1998-07-15 09:59:31 +00:00
Julian Elischer
ad27f8d9a5 SLICE probing becomes asynchronous. It can now be triggered by
interupt level events. This needs a lot of cleanup, but has been working
here for a month or two.. originally needed for CAM integration
but that hasn't happenned yet. The probing  state machines for each
handler should be replaced by a more generic state-service. It's
still quite messy in there..
1998-07-13 08:23:05 +00:00
Bruce Evans
a838d83d8f Don't pretend to support ix86's with 7-bit ints by using longs just to
ensure 8-bit variables.  Doing so mainly bogotified some printf formats.
1998-07-11 06:35:39 +00:00
Julian Elischer
f7ea2f55d1 There is no such thing any more as "struct bdevsw".
There is only cdevsw (which should be renamed in a later edit to deventry
or something). cdevsw contains the union of what were in both bdevsw an
cdevsw entries.  The bdevsw[] table stiff exists and is a second pointer
to the cdevsw entry of the device. it's major is in d_bmaj rather than
d_maj. some cleanup still to happen (e.g. dsopen now gets two pointers
to the same cdevsw struct instead of one to a bdevsw and one to a cdevsw).

rawread()/rawwrite() went away as part of this though it's not strictly
the same  patch, just that it involves all the same lines in the drivers.

cdroms no longer have write() entries (they did have rawwrite (?)).
tapes no longer have support for bdev operations.

Reviewed by: Eivind Eklund and Mike Smith
	Changes suggested by eivind.
1998-07-04 22:30:26 +00:00
Doug Rabson
498b291e26 Fix some more ioctls which I missed becausese they were hidden by options
which were not in LINT.
1998-06-07 19:40:41 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Julian Elischer
9b7408fe46 There is no dump routine for fd so give it an explicit NULL entry
in the SLICE table.
1998-05-06 23:35:36 +00:00
Julian Elischer
7f2f1b784e Add dump support to the DEVFS/slice code.
now we can actually catch our crashes :-)

Submitted by: Luoqi Chen <luoqi@chen.ml.org> (the man who's everywhere)
1998-05-06 22:14:48 +00:00
Julian Elischer
26d3bf5f1b close() is no longer a SLICE method.
Close is simply an open with no-read and no-write once internal to SLICE
(it still exports a close to the rest of the kernel)
1998-04-22 10:25:27 +00:00
Julian Elischer
3e425b968d Add changes and code to implement a functional DEVFS.
This code will be turned on with the TWO options
DEVFS and SLICE. (see LINT)
Two labels PRE_DEVFS_SLICE and POST_DEVFS_SLICE will deliniate these changes.

/dev will be automatically mounted by init (thanks phk)
on bootup. See /sys/dev/slice/slice.4 for more info.
All code should act the same without these options enabled.

Mike Smith, Poul Henning Kamp, Soeren, and a few dozen others

This code does not support the following:
bad144 handling.
Persistance. (My head is still hurting from the last time we discussed this)
ATAPI flopies are not handled by the SLICE code yet.

When this code is running, all major numbers are arbitrary and COULD
be dynamically assigned. (this is not done, for POLA only)
Minor numbers for disk slices ARE arbitray and dynamically assigned.
1998-04-19 23:32:49 +00:00
Dag-Erling Smørgrav
dc73342347 Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108. 1998-04-17 22:37:19 +00:00
Eivind Eklund
7b778b5e61 Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style.
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)

LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Poul-Henning Kamp
ab3f746966 In all such uses of struct buf: 's/b_un.b_addr/b_data/g' 1997-12-02 21:07:20 +00:00
Joerg Wunsch
0722d6aba3 Introduce a device flags value of 0x1 to always pretend a 1.44 MB
floppy drive #0, regardless of what the CMOS says.  This is intended
as a bandaid for those plagued with Compaq's idea to not announce the
floppy drive on their `Aero' notebook.

Using the device flags is not very nice (in particular since they
aren't per-drive but per-controller), but still looks a lot better to
me than the disgusting guesswork hack that was recently posted to
-hackers.

Doc update will follow shortly.
1997-10-19 13:12:02 +00:00
Justin T. Gibbs
27651b7faa Fix a call to timeout that wasn't properly saving it's callout handle.
Submitted by:	 durian@plutotech.com
1997-09-23 22:14:43 +00:00
Justin T. Gibbs
02a199102d aha1542.c aic6360.c cy.c fd.c ft.c
if_ie.c if_wl.c if_zp.c isa.c isa_device.h
labpc.c mcd.c ncr5380.c scd.c seagate.c si.c
sio.c tw.c ultra14f.c wcd.c wd.c:

	Update for changes in the callout interface.

apic_vector.s icu_vector.s ipl.s ipl_funcs.c:

	Add CAM software/hardware interrupt support.
1997-09-21 21:41:49 +00:00
Tor Egge
d66c374f58 Enable the FIFO on enhanced floppy controllers. This reduces the
number of dma overruns/underruns for systems under heavy dma load.
As a side effect, broken enhanced floppy controllers that sometimes
don't detect dma overruns/underruns will give less errors.

Reviewed by:	j@uriah.heep.sax.de (J Wunsch)
1997-09-17 20:16:17 +00:00
Joerg Wunsch
d2fb48929a Make FDC_DEBUG a supported option.
Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented
option, since people started to trust the bogus claim.  Once we're going
to handle 2.88 MB controllers, we have to redo the chip detection, by
now just leave it hidden.
1997-09-16 07:45:45 +00:00
Bruce Evans
f71d35e402 Removed unused #includes. 1997-07-20 14:10:18 +00:00
Bruce Evans
fce002fdef Don't include <sys/ioctl.h> in the kernel. Stage 1: don't include
it when it is not used.  In most cases, the reasons for including it
went away when the special ioctl headers became self-sufficient.
1997-03-24 11:25:10 +00:00
Bruce Evans
3ac4d1ef0c Don't #include <sys/fcntl.h> in <sys/file.h> if KERNEL is defined.
Fixed everything that depended on getting fcntl.h stuff from the wrong
place.  Most things don't depend on file.h stuff at all.
1997-03-23 03:37:54 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
John Dyson
996c772f58 This is the kernel Lite/2 commit. There are some requisite userland
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.

The system boots and can mount UFS filesystems.

Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
		Mount_std mounts will not work until the getfsent
		library routine is changed.

Reviewed by:	various people
Submitted by:	Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Bruce Evans
d43190805d Disabled half-baked disk statistics support. It didn't actually generate
statistics, so it just wasted scarce disk table slots and screen space.
1996-12-18 17:44:31 +00:00
Joerg Wunsch
bb6382fae2 Fix the broken EOF handling in the floppy driver. The most obvious
appearance of this bug was the malfunctioning -M option in GNU tar (it
worked only by explicitly specifying -L).

Reviewed by:	bde, and partially corrected accoring to his comments

Candidate for 2.2, IMHO even for 2.1.6.
1996-11-02 23:31:11 +00:00