Commit Graph

18847 Commits

Author SHA1 Message Date
Paul Traina
88636c0b6f Don't use /tmp for afterdepend cleanup target 1997-01-26 01:37:05 +00:00
Julian Elischer
d57d661cf2 fix mixleading comment (my error.. I wrote the comment) 1997-01-26 01:00:45 +00:00
Poul-Henning Kamp
0c0c8511e7 Since we have netatalk in the kernel, make life a little easier for
people and add the four needed entries in /etc/services.
1997-01-25 20:55:46 +00:00
Mike Pritchard
cc2c561f5e Man page police. 1997-01-25 20:42:09 +00:00
Bill Paul
fc7c79b907 Make the SCSI probe messages more BSDish. This may raise a few eyebrows
("Hey! Who made _you_ the keeper of all things BSDish?!") but this has
bugged me for a long time, and now that I finally have the chance
to hack on it (and test the results), I'll take my chances. I can also
point to other BSD implementations for precedents if you put my back to
the wall.

The only thing that's changed is how the messages are formatted. Now,
instead of having this:

aha0 at 0x330-0x333 irq 11 drq 5 on isa
(aha0:3:0): "HP C1553A 9503" type 1 removable SCSI 2
st0(aha0:3:0): Sequential-Access density code 0x24, variable blocks, write-enabled
(aha0:3:1): "HP C1553A 9503" type 8 removable SCSI 2
ch0(aha0:3:1): Medium-Changer 6 slot(s) 1 drive(s) 0 arm(s) 0 i/e-slot(s)

We have this:

aha0 at 0x330-0x333 irq 11 drq 5 on isa
scbus0 at aha0 bus 0
st0 at scbus0 target 3 lun 0
st0: <HP C1553A 9503> type 1 removable SCSI 2
st0: Sequential-Access density code 0x24, variable blocks, write-enabled
ch0 at scbus0 target 3 lun 1
ch0: <HP C1553A 9503> type 8 removable SCSI 2
ch0: Medium-Changer 6 slot(s) 1 drive(s) 0 arm(s) 0 i/e-slot(s)

Which is (to me anyway) is a lot more pleasant to look at. (Call me
crazy -- g'head: you know you wanna -- but the previous messages remind
me of Linux. Ever see the output from the linux device probes? It's a mess
of copyright notices, version numbers/dates, author e-mail addresses and
other crap. Let's not go there, okay? Bleh.)

Notice that devices are now specified in terms of the scsi bus they
live on rather than the adapter. This better reflects the contents
of the kernel config file (if you use wired-down device specifications
anyway) and removes some ambiguity that may arise if you have a multi-
channel adapter with more than one bus.

Also, sc_print_addr() now generates messages like this:
st0 at scbus0 target 3 lun 0: NOT READY asc:3a,0 Medium not present

instead of this:
st0(aha0:3:0): NOT READY asc:3a,0 Medium not present

I also added a quirk entry for the HP Superstore 12000e 6 tape DAT
autoloader, which needs SC_MORE_LUS in order for the changer device
to be properly probed and attached. (I'm working on a chcontrol utility
to manipulate the changer on this drive which should hopefully be general
enough to work with other changers too. If you want the prototype I have
now, it's at ftp://skynet.ctr.columbia.edu/pub/freebsd/changer.c.)

Remaining bugs:

- The 'foodev0: yadda yadda yadda' bits should probably be printed entirely
  by the device-specific subdriver attach code instead of half by the
  scsi_device_attach() routine and half by the device specific attach
  routine like it is now.

- The wired-down device specifications in the kernel config file should
  be used to control bus/device probing to some extent rather than just
  for choosing names for devices we find. If the config says there's a
  device at scbus0 target 0 lun 0 called sd0, we should look there and
  check for a device that can be managed by the sd driver. If we don't
  find one, we should probably complain that there's no device there or
  that there is a device but of the wrong type. Once all the devices from
  the wired down list have been probed, the code can then autodetect and
  autoattach any devices that remain unassigned.

- Apparently some tape changers (hi Ulf!) return 'not ready/medium not
  present' when the magazine is loaded but a tape has not been put in the
  drive yet. This causes an open(/dev/ch0) to fail and prevents you from
  using the changer.c utility to load the first tape into the drive. My
  HP changer does not behave this way. The workaround is to manually load
  a tape into the drive before attempting to use the changer program, but
  you can get in trouble if you accidentally eject a tape without loading
  a new one and you're at a remote location: you won't be able to load
  any tapes anymore. I'm not sure what the correct software solution is
  for this but ideally there should be one.

- I should not be doing this: I'm the NIS guru, not the SCSI guru.
  (This is not my beautiful code. How did I get here? My god: what
  have I done?)
1997-01-25 20:27:13 +00:00
Bruce Evans
4123678332 Sync with <pci/pcibus.h>. pcibus.c unfortunately still compiled (with
only 3 or 4 warnings) when pb_maxirq went away.
1997-01-25 18:51:01 +00:00
KATO Takenori
6d5d69845a Change default I/O recovery time for Cyrix 5x86 to 0. The BIOS
Writers Guide mentions that IORT should be 0 for errata fix.
1997-01-25 10:37:03 +00:00
KATO Takenori
1817f78ea0 Synchronize with sys/i386/i386/machdep.c rev. 1.226. 1997-01-25 06:42:19 +00:00
KATO Takenori
d8750fa79b Synchronize with sys/i386/isa/syscons.{c,h} rev. 1.199 and 1.27,
respectively.
1997-01-25 06:38:14 +00:00
KATO Takenori
2410185246 Synchronize with sys/i386/isa/if_fe.c rev. 1.26. 1997-01-25 06:33:24 +00:00
Nate Williams
90b98c2933 Change the entry for ttyv3 to be the same as X would require if we
were using xdm (but still off).
1997-01-25 05:51:23 +00:00
Warner Losh
2e42144ea7 Apply patch from pr2536, after testing locally.
Fixes: PR2446 and PR2536

Submitted by: Flemming Jacobsen <fj@tfs.com>

2.2 Candidate.
1997-01-25 05:27:17 +00:00
Satoshi Asami
17abb434aa (1) Add ${DESTDIR} to ${LOCALBASE} and ${X11BASE}, and remove it from
${PORTSDIR}.  This undoes the changes done in rev. 1.38 and 1.59
    (part of the bsd.port.mk pre-dawn ages I've never understood).
Requested by: jkh

(2) Add new variable NO_IGNORE that will override any IGNORE causes.
    This is just a little hack to allow building of REQUIRES_MOTIF
    ports and its dependencies only etc., so don't document it.

(3) Update +REQUIRED_BY files as necessary.  Now you should be able to
    delete ports that have runtime dependencies without pkg_delete
    complaining about this file missing.
1997-01-25 02:45:09 +00:00
Stefan Eßer
80432747dc Remove element pb_maxirq from struct pcibus. 1997-01-25 02:22:34 +00:00
Satoshi Asami
bee9cbfd38 Explain more about the interleave factor. Mention mirroring, and add
a reminder that you can't mount half of a mirrored two-disk ccd.
1997-01-25 02:10:43 +00:00
Stefan Eßer
e8bfed6d98 Improve on previous fix: Clean up getirq() as well, and remove redundant
warning messages.
1997-01-25 01:57:30 +00:00
David Greenman
098415100b Added a check/panic for v_usecount being 0 (no vnode reference) in
vnode_pager_alloc().
1997-01-24 22:20:23 +00:00
David Greenman
fe95dc619a Changed dkunit() to use some previously unused bits in the 'type' field
to extend the unit field to 9 bits (512 units).
1997-01-24 22:13:09 +00:00
Justin T. Gibbs
09e505318a Add the definition for the CFAUTOTERM bit in the aic78xx SEEPROM.
Add auto-termination support as well as support for setting the high byte
termination.  Booting with '-v' will display the settings that the driver
chose.  If you stick narrow devices onto the external wide port, you had
better make sure that your converter cable terminates the bus, you have a
wide device on there that terminates the bus, or you manually set the
termination properly in SCSI-Select instead of using "Automatic".  The
code will get the setting right regardless if you *don't* have internal
wide devices in this type of configuration.  Unfortunatly this is a limitation
of the design of the Adaptec cards.
1997-01-24 22:04:14 +00:00
David Greenman
ac9e2a2511 Change to use some unused bits in the 'type' field to extend the unit field
to 9 bits (512 units) for disk devices.
1997-01-24 22:00:35 +00:00
Justin T. Gibbs
c2f69d249e 93cx6.c:
Style nit.  Backslashes in macro weren't aligned.

aic7xxx.c:
Preserve the value of STPWEN in SXFRCTL1 during initialization.  STPWEN
controls low byte termination and is setup by the PCI probe front end.
1997-01-24 21:59:32 +00:00
Justin T. Gibbs
ed69a71305 Change the way DMA is handled during the command phase. Only test on
SDONE, not HDONE.

In the data phase dma handler, mask off just the enable bits instead of
clearing the whole register.  Clearing the direction bit could be bad.
Also don't stop a DMA until MREQPEND goes false.  Doing this may cause
an ABORT on the PCI bus although I have yet to see this happen.

Add definitions for MREQPEND and the BRDCTL register.  The BRDCTL register
is used to handle high byte termination and automatic termination testing.
1997-01-24 21:57:47 +00:00
Bruce Evans
f42cf36fa8 Fixed some formatting bugs (mostly regressions in rev.1.48). Replaced
some magic numbers by pmap constants.  Cosmetic.
1997-01-24 20:37:57 +00:00
Jordan K. Hubbard
7ce6b270fd Allow both types of XFree86 setup script to be run at user choice. 1997-01-24 20:20:12 +00:00
Jordan K. Hubbard
d733b8a9fb I need to learn to read man pages more closely. readlink() does NOT null
append the return string (bleah!) so you need to do it yourself.  This
explains why Bus and PS/2 meece weren't displayed in the Mouse selection
menu.
1997-01-24 19:31:53 +00:00
Jordan K. Hubbard
5214787fd5 OK, I've got two ideas to file in the "really seemed like a good idea
at the time, but on further reflection..." bucket with these changes.

1. Checking the media before frobbing the disks was a fine idea, and
   I wish it could have worked, but that leads to a rather difficult
   situation when you need to mount the media someplace and you're about
   to:

	a) Chroot away from your present root.
	b) Newfs the root to be.

   You're basically screwed since there's no place to stick the mount
   point where it will be found following the newfs/chroot (and eliminating
   the chroot in favor of just using the "root bias" feature would work
   great for the distributions but not the pkg_add calls done by the
   package installer).

2. Automatic timeout handling.  I don't know why, but alarm() frequently
   returns no residual even when the alarm didn't go off, which defies
   the man page but hey, since when was that so unusual?  Take out timeouts
   but retain the code which temporarily replaces the SIGINT handler in
   favor of a more media-specific handler.  This way, at least, if it's hanging
   you can at least whap it.  I think the timeout code would have been losing
   over *really slow* links anyway, so it's probably best that it go.

This should fix NFS, tape & CDROM installs again (serves me right for getting
complacent and using just the FTP installs in my testing).
1997-01-24 19:24:51 +00:00
Bruce Evans
d9cca175bc Initialize CR0_MP in setregs() in case npx0 is disabled or not configured.
Disabling npx0 works right now.

Don't reference `npxdriver' if npx0 is not configured.  Not configuring
npx0 doesn't quite work yet.

Don't clear potential non-npx pcb flags in setregs().
1997-01-24 19:01:54 +00:00
David E. O'Brien
8819cbef39 KNF style police.
Reported by:	Bruce
Thanks to:	Bruce for also providing a diff.
1997-01-24 12:39:11 +00:00
Jordan K. Hubbard
f0191e4764 Add a section for FreeBSD-specific works. 1997-01-24 12:00:10 +00:00
Jordan K. Hubbard
5bdab685d1 As /etc/sysconfig and /etc/rc.i386 is now, you can't modify the syscons
bell type on boot. Slightly annoying when your system doesn't have a speaker.
This adds a `keybell' frob for setting it.  Closes PR#2519

Submitted-By: Jonathan Mini <mini@hydrogen.nike.efn.org>
1997-01-24 10:12:45 +00:00
Jordan K. Hubbard
76d01c999a This is a patch that makes some of the "partitions" --> "slice" to be
more consistant in our use of the terms for differentiation between PC
partitions and traditional BSD partitions.

Submitted-By: obrien@cs.ucdavis.edu (David O'Brien)
1997-01-24 07:47:17 +00:00
Jordan K. Hubbard
63eb3ecd42 Update russian mirrors. 1997-01-24 07:03:15 +00:00
David E. O'Brien
ae462d03db Change from using chunk_n to slice_type_name().
Reviewed by:	jkh
1997-01-24 02:26:42 +00:00
Andrey A. Chernov
93b3bdab56 Add save/restore cursor position capabilities for FreeBSD console 1997-01-24 00:54:19 +00:00
John Polstra
18be4a71df Use xmalloc instead of malloc in two places, so that out-of-memory
conditions will be detected.

Submitted by:	Philippe Charnier <charnier@xp11.frmug.org>
1997-01-24 00:07:03 +00:00
Stefan Eßer
a67fa10338 Make IRQ 0 invalid in pci_map_int(), since it is hardwired to the
programmable interval timer chip in PC systems.
1997-01-23 22:58:03 +00:00
Søren Schmidt
0d3f983ad2 Add save/restore cursor as pr SCO screen(HW) manpage.
Fix ESC[2J to not move cursor home
Clear mouse cutmarking on more cases.
Minor changes by me.

Submitted by:	ache
1997-01-23 20:00:45 +00:00
Garrett Wollman
6a4c899092 Put newlines after log messages.
Submitted by:	seki@sysrap.cs.fujitsu.co.jp PR#2563 (but the patch didn't
		apply)
1997-01-23 16:17:09 +00:00
Masafumi Max NAKANE
427910f0e2 Fix typo in instruction message. 1997-01-23 09:02:49 +00:00
KATO Takenori
30fcb6026c Synchronize with sys/i386/i386/trap.c revision 1.86. 1997-01-23 08:39:59 +00:00
David E. O'Brien
8d1db4e2bb Adaptec AHA-1535 works fine with FBSD. It is basicly an ROM-less, PIO
Plug-n-Pray verison of the the AHA-1540.
1997-01-23 07:44:57 +00:00
David E. O'Brien
2663983f01 Adaptex 1535 and 2980U are supported. 1997-01-23 07:36:04 +00:00
David E. O'Brien
e9ce3d82e4 Adds slice_type_name() which extends chunk_n[] for subtype's too.
Curorary review by:	phk
1997-01-23 06:29:01 +00:00
Masafumi Max NAKANE
54ddcf4fa1 When calling recover() from getarg(), also check to see if the first
character of the argument being processed isn't '\0'.

This fixes problem with backgammon exiting abnormally when you answer 'y' to
the question it asks if you need instruction for the game.

2.2 cnadidate, maybe?
1997-01-23 04:41:01 +00:00
Masafumi Max NAKANE
628c949a71 Merge 1.199 -> 1.201 changes. 1997-01-23 04:26:34 +00:00
Masafumi Max NAKANE
30f326d22f Merge 1.52->1.55 changes. 1997-01-23 04:19:03 +00:00
Masafumi Max NAKANE
8a7bb5c435 Make this list in alphabetical order again.
Added a comment at the top to remind committers keep this list in
alphabetical order.
1997-01-23 04:14:55 +00:00
John Dyson
7e64cb7a96 Remove some dead code from trapwrite.
Submitted by:	Stephen McKay <syssgm@devetir.qld.gov.au>
1997-01-23 01:30:59 +00:00
Jordan K. Hubbard
b9ee2adda6 Note that Adaptec 1505 is also supported.
Pointed-Out-By: Doug White and Danie Van Heerden
1997-01-22 20:29:41 +00:00
Jordan K. Hubbard
3619bac7dd Add Kazutaka YOKOTA to committers list. 1997-01-22 19:23:59 +00:00