With various firmware files used by graphics and wireless drivers
we are exceeding the current 32 character module name (file path
in kldxref) length.
In order to overcome this issue bump it to the maximum path length
for the next version.
To be able to MFC provide backward compat support for another version
of the struct as the offsets for the second half change due to the
array size increase.
MAXMODNAME being defined to MAXPATHLEN needs param.h to be
included first. With only 7 modules (or LinuxKPI module.h) not
doing that adjust them rather than including param.h in module.h [1].
Reported by: Greg V (greg unrelenting.technology)
Sponsored by: The FreeBSD Foundation
Suggested by: imp [1]
MFC after: 10 days
Reviewed by: imp (and others to different level)
Differential Revision: https://reviews.freebsd.org/D32383
FUSE_COPY_FILE_RANGE instructs the server to write data to a file.
fusefs must invalidate any cached data within the written range.
PR: 260242
MFC after: 2 weeks
Reviewed by: pfg
Differential Revision: https://reviews.freebsd.org/D33280
This function was always confusing, because it created an H-shaped
callgraph: two functions called in and left via different paths based on
which which called.
MFC after: 2 weeks
Correctly handle the situation where a FUSE server unlinks a file, then
creates a new file of a different type but with the same inode number.
Previously fuse_vnop_lookup in this situation would return EAGAIN. But
since it didn't call vgone(), the vnode couldn't be reused right away.
Fix this by immediately calling vgone() and reallocating a new vnode.
This problem can occur in three code paths, during VOP_LOOKUP,
VOP_SETATTR, or following FUSE_GETATTR, which usually happens during
VOP_GETATTR but can occur during other vops, too. Note that the correct
response actually doesn't depend on whether the entry cache has expired.
In fact, during VOP_LOOKUP, we can't even tell. Either it has expired
already, or else the vnode got reclaimed by vnlru.
Also, correct the error code during the VOP_SETATTR path.
PR: 258022
Reported by: chogata@moosefs.pro
MFC after: 2 weeks
Reviewed by: pfg
Differential Revision: https://reviews.freebsd.org/D33283
When using cached attributes, whether or not the data cache is enabled,
fusefs must update a file's atime whenever it reads from it, so long as
it wasn't mounted with -o noatime. Update it in-kernel, and flush it to
the server on close or during the next setattr operation.
The downside is that close() will now frequently trigger a FUSE_SETATTR
upcall. But if you care about performance, you should be using
-o noatime anyway.
MFC after: 2 weeks
Reviewed by: pfg
Differential Revision: https://reviews.freebsd.org/D33145
When copy_file_range extends a file, it must update the cached file
size.
MFC after: 2 weeks
Reviewed by: rmacklem, pfg
Differential Revision: https://reviews.freebsd.org/D33151
If the FUSE server tells the kernel that a file's size has changed, then
the kernel must invalidate any portion of that file in cache. But the
kernel can't do that during VOP_STRATEGY, because the file's buffers are
already locked. Instead, proceed with the write.
PR: 256937
Reported by: Agata <chogata@moosefs.pro>
Tested by: Agata <chogata@moosefs.pro>
MFC after: 2 weeks
Reviewed by: pfg
Differential Revision: https://reviews.freebsd.org/D32332
fuse_vnop_bmap needs to know the file's size in order to calculate the
optimum amount of readahead. If the file's size is unknown, it must ask
the FUSE server. But if the file's data was previously cached and the
server reports that its size has shrunk, fusefs must invalidate the
cached data. That's not possible during VOP_BMAP because the buffer
object is already locked.
Fix the panic by not querying the FUSE server for the file's size during
VOP_BMAP if we don't need it. That's also a a slight performance
optimization.
PR: 256937
Reported by: Agata <chogata@moosefs.pro>
Tested by: Agata <chogata@moosefs.pro>
MFC after: 2 weeks
If the FUSE server does something that would make our cache incoherent,
we should print a warning to the user. However, we previously warned in
some situations when we shouldn't, such as if the file's size changed on
the server _after_ our own attribute cache had expired. This change
suppresses the warning in cases like that. It also moves the warning
logic to a single place within the code.
PR: 256936
Reported by: Agata <chogata@moosefs.pro>
Tested by: Agata <chogata@moosefs.pro>, jSML4ThWwBID69YC@protonmail.com
MFC after: 2 weeks
For file systems that allow it, fusefs will skip FUSE_OPEN,
FUSE_RELEASE, FUSE_OPENDIR, and FUSE_RELEASEDIR operations, a minor
optimization.
MFC after: 2 weeks
Reviewed by: pfg
Differential Revision: https://reviews.freebsd.org/D32141
During VOP_GETPAGES, fusefs needs to determine the file's length, which
could require a FUSE_GETATTR operation. If that fails, it's better to
SIGBUS than panic.
MFC after: 1 week
Sponsored by: Axcient
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D31994
During FUSE_SETLK, the owner field should uniquely identify the calling
process. The fusefs module now sets it to the process's pid.
Previously, it expected the calling process to set it directly, which
was wrong.
libfuse also apparently expects the owner field to be set during
FUSE_GETLK, though I'm not sure why.
PR: 256005
Reported by: Agata <chogata@moosefs.pro>
MFC after: 2 weeks
Reviewed by: pfg
Differential Revision: https://reviews.freebsd.org/D30622
Every FUSE operation has a unique value in its header. As the name
implies, these values are supposed to be unique among all outstanding
operations. And since FUSE_INTERRUPT is asynchronous and racy, it is
desirable that the unique values be unique among all operations that are
"close in time".
Ensure that they are actually unique by incrementing them whenever we
reuse a fuse_dispatcher object, for example during fsync, write, and
listextattr.
PR: 244686
MFC after: 2 weeks
Reviewed by: pfg
Differential Revision: https://reviews.freebsd.org/D30810
/dev/fuse is always ready for writing, so it's kind of dumb to poll it.
But some applications do it anyway. Better to return ready than EINVAL.
MFC after: 2 weeks
Reviewed by: emaste, pfg
Differential Revision: https://reviews.freebsd.org/D30784
The fusefs driver will print warning messages about FUSE servers that
commit protocol violations. Previously it would print those warnings on
every violation, but that could spam the console. Now it will print
each warning no more than once per lifetime of the mount. There is also
now a dtrace probe for each violation.
MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: emaste, pfg
Differential Revision: https://reviews.freebsd.org/D30780
kevans actually caught this in the original review and I fixed it, but
then I committed an older copy of the branch. Whoops.
Reported by: kevans
MFC after: 13 days
MFC with: 929acdb19a
Differential Revision: https://reviews.freebsd.org/D29031
1) F_SETLKW (blocking) operations would be sent to the FUSE server as
F_SETLK (non-blocking).
2) Release operations, F_SETLK with lk_type = F_UNLCK, would simply
return EINVAL.
PR: 253500
Reported by: John Millikin <jmillikin@gmail.com>
MFC after: 2 weeks
The data is only needed by filesystems that
1. use buffer cache
2. utilize clustering write support.
Requested by: mjg
Reviewed by: asomers (previous version), fsu (ext2 parts), mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28679
This allows d_off to be used with lseek to position the file so that
getdirentries(2) will return the next entry. It is not used by
readdir(3).
PR: 253411
Reported by: John Millikin <jmillikin@gmail.com>
Reviewed by: cem
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28605
Must lock the vnode before accessing the fufh table. Also, check for
invalid parameters earlier. Bug introduced by r346170.
MFC after: 2 weeks
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D27936
This updates the FUSE protocol to 7.28, though most of the new features
are optional and are not yet implemented.
MFC after: 2 weeks
Relnotes: yes
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D27818
FUSE_LSEEK reports holes on fuse file systems, and is used for example
by bsdtar.
MFC after: 2 weeks
Relnotes: yes
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D27804
The original fusefs GSoC project seems to have envisioned exchanging two
types of messages with FUSE servers. Perhaps vectored and non-vectored?
But in practice only one type has ever been used. Delete the other type.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D27770
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
No functional change intended.
Tracking these structures separately for each proc enables future work to
correctly emulate clone(2) in linux(4).
__FreeBSD_version is bumped (to 1300130) for consumption by, e.g., lsof.
Reviewed by: kib
Discussed with: markj, mjg
Differential Revision: https://reviews.freebsd.org/D27037
from a Linux binary. Should come handy for AppImages.
Reviewed by: asomers
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26959
If a FUSE server returns FOPEN_DIRECT_IO in response to FUSE_OPEN, that
instructs the kernel to bypass the page cache for that file. This feature
is also known by libfuse's name: "direct_io".
However, when accessing a file via mmap, there is no possible way to bypass
the cache completely. This change fixes a deadlock that would happen when
an mmap'd write tried to invalidate a portion of the cache, wrongly assuming
that a write couldn't possibly come from cache if direct_io were set.
Arguably, we could instead disable mmap for files with FOPEN_DIRECT_IO set.
But allowing it is less likely to cause user complaints, and is more in
keeping with the spirit of open(2), where O_DIRECT instructs the kernel to
"reduce", not "eliminate" cache effects.
PR: 247276
Reported by: trapexit@spawn.link
Reviewed by: cem
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26485
This reapplies logical r360944 and r360946 (reverting r360955), with fixed
copystr() stand-in replacement macro. Eventually the goal is to convert
consumers and kill the macro, but for a first step it helps if the macro is
correct.
Prior commit message:
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Add a coccinelle script to tools/ which can be used to mechanically
convert existing instances where replacement with strlcpy is trivial.
In the two cases which matched, fuse_vfsops.c and union_vfsops.c, the
code was further refactored manually to simplify.
Replace the declaration of copystr() in systm.h with a small macro
wrapper around strlcpy (with correction from brooks@ -- thanks).
Remove N redundant MI implementations of copystr. For MIPS, this
entailed inlining the assembler copystr into the only consumer,
copyinstr, and making the latter a leaf function.
Reviewed by: jhb (earlier version)
Discussed with: brooks (thanks!)
Differential Revision: https://reviews.freebsd.org/D24672
This patch fixes two issues relating to FUSE_ACCESS when the
default_permissions mount option is disabled:
* VOP_ACCESS() calls with VADMIN set should never be sent to a fuse server
in the form of FUSE_ACCESS operations. The FUSE protocol has no equivalent
of VADMIN, so we must evaluate such things kernel-side, regardless of the
default_permissions setting.
* The FUSE protocol only requires FUSE_ACCESS to be sent for two purposes:
for the access(2) syscall and to check directory permissions for
searchability during lookup. FreeBSD sends it much more frequently, due to
differences between our VFS and Linux's, for which FUSE was designed. But
this patch does eliminate several cases not required by the FUSE protocol:
* for any FUSE_*XATTR operation
* when creating a new file
* when deleting a file
* when setting timestamps, such as by utimensat(2).
* Additionally, when default_permissions is disabled, this patch removes one
FUSE_GETATTR operation when deleting a file.
PR: 245689
Reported by: MooseFS FreeBSD Team <freebsd@moosefs.pro>
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24777
Nullfs cacheing can keep a large number of vnodes active. That results in
more active FUSE file handles, causing some FUSE servers to use extra
resources. Disable nullfs cacheing for fusefs, just like we already do for
NFSv4.
PR: 245688
Reported by: MooseFS FreeBSD Team <freebsd@moosefs.pro>
MFC after: 2 weeks
Unlike the other copy*() functions, it does not serve to copy from one
address space to another or protect against potential faults. It's just
an older incarnation of the now-more-common strlcpy().
Add a coccinelle script to tools/ which can be used to mechanically
convert existing instances where replacement with strlcpy is trivial.
In the two cases which matched, fuse_vfsops.c and union_vfsops.c, the
code was further refactored manually to simplify.
Replace the declaration of copystr() in systm.h with a small macro
wrapper around strlcpy.
Remove N redundant MI implementations of copystr. For MIPS, this
entailed inlining the assembler copystr into the only consumer,
copyinstr, and making the latter a leaf function.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D24672
