Commit Graph

1297 Commits

Author SHA1 Message Date
Jung-uk Kim
1c0e1b6da9 Merge ACPICA 20141107 and 20150204. 2015-02-18 20:33:00 +00:00
Hans Petter Selasky
b5c1e0cb8d Update the infiniband stack to Mellanox's OFED version 2.1.
Highlights:
 - Multiple verbs API updates
 - Support for RoCE, RDMA over ethernet

All hardware drivers depending on the common infiniband stack has been
updated aswell.

Discussed with:	np @
Sponsored by:	Mellanox Technologies
MFC after:	1 month
2015-02-17 08:40:27 +00:00
Adrian Chadd
b8871f0823 Add initial support to the AR9300 HAL to support FreeBSD's intmit API.
I don't like having it in this function; I may migrate it to ar9300_freebsd.c
at some point to keep the HAL code pollution down.

This allows ANI to be disabled via a sysctl.

Tested:

* AR9331, STA/TDMA modes
2015-02-15 21:15:09 +00:00
Adrian Chadd
caa918bd3b Add ath_hal_setbeacontimers() to the AR9300 HAL.
This is a custom FreeBSD HAL method that is used by the TDMA code
to program the beacon timers directly without any guesswork/assumptions
by the HAL.

This brings up basic TDMA master/slave support on the AR9380 HAL,
however there are other issues preventing it from being stable.
(I'm seeing beacon interval instability, which may be due to
busy 2GHz air, but also may be due to some HAL configuration
issues with regards to ANI, or hardware timer programming, etc.)

Tested:

* AR9331 (Carambola2), STA, AP, adhoc and TDMA master mode.
2015-02-15 19:56:31 +00:00
Adrian Chadd
3876533b14 Comment out a double declaration of this particular function name.
It trips up gcc builds.

Pointy-hat-from:	jenkins, kib
2015-02-14 17:44:24 +00:00
Adrian Chadd
cb2f5d5ddb Quieten a clang warning. 2015-02-14 17:43:54 +00:00
Adrian Chadd
06f874e1f9 Remove the reserved pin 11 from the HAL check.
The QCA9565 can have RFKILL on GPIO Pin 11, and thus we need to configure
it up correctly or the NIC may not function.

I'm not sure why the AR9382 can't use GPIO 8 / GPIO 11 ; it's likely
hooked up to some external LNA or filter.  The real solution is to
make it only block pin 8 / pin 11 for AR9382, but the AR9382 probes
like an AR9380.  Sigh.

Submitted by:	Anthony Jenkins <scoobi_doo@yahoo.com>
2015-02-14 16:23:04 +00:00
Adrian Chadd
899d1cacac Update the AR9300 HAL to the latest public available HAL from QCA.
I've been sitting on this for a year or so now; I've finally
tested it on enough devices to be reasonably sure it won't
cause too much drama.  But, if you see issues, please email me.

Tested (all STA mode):

PCIe:

* AR9380
* AR9390
* AR9580
* AR9462
* AR9485

SoC:

* QCA9550
* AR9331
* AR9342
2015-02-14 04:28:51 +00:00
Oleksandr Tymoshenko
e6c4672e82 Fix build without INVARIANTS/INVARIANT_SUPPORT:
- Replace "emulation" of return in lmutex_lock_interruptible macros by
    proper static/inline function.

Submitted by:	Guy Yur
2015-02-13 02:10:09 +00:00
Oleksandr Tymoshenko
b5d689899d - Perform bus_dmamap_sync on pagelist structure
- Wire pages of bulk transfer buffer when preparing pagelist
2015-02-12 04:31:17 +00:00
Kevin Lo
6fc44dab19 Add preliminary support for the Ralink RT5390 and RT5392 chipsets.
Committed over the D-Link DWA-525 rev A2 on amd64 with WPA.
2015-02-11 05:25:23 +00:00
Konstantin Belousov
4c918926cd Add x2APIC support. Enable it by default if CPU is capable. The
hw.x2apic_enable tunable allows disabling it from the loader prompt.

To closely repeat effects of the uncached memory ops when accessing
registers in the xAPIC mode, the x2APIC writes to MSRs are preceeded
by mfence, except for the EOI notifications.  This is probably too
strict, only ICR writes to send IPI require serialization to ensure
that other CPUs see the previous actions when IPI is delivered.  This
may be changed later.

In vmm justreturn IPI handler, call doreti_iret instead of doing iretd
inline, to handle corner conditions.

Note that the patch only switches LAPICs into x2APIC mode. It does not
enables FreeBSD to support > 255 CPUs, which requires parsing x2APIC
MADT entries and doing interrupts remapping, but is the required step
on the way.

Reviewed by:	neel
Tested by:	pho (real hardware), neel (on bhyve)
Discussed with:	jhb, grehan
Sponsored by:	The FreeBSD Foundation
MFC after:	2 months
2015-02-09 21:00:56 +00:00
Oleksandr Tymoshenko
10e99e6057 Do not mark shared structures as __packed, it leads to race condition
If structure packed as __packed clang (and probably gcc) generates
code that loads word fields (e.g. tx_pos)  byte-by-byte and if it's
modified by VideoCore in the same time as ARM loads the value result
is going to be mixed combination of bytes from previous value and
new one.
2015-02-09 02:31:27 +00:00
Oleksandr Tymoshenko
e6bf0bdb36 Remove unused variables 2015-02-09 02:27:33 +00:00
Oleksandr Tymoshenko
4676e354fd Act as a bus in attach method: probe and attach devices 2015-02-08 01:12:23 +00:00
Dimitry Andric
772400696c Fix a number of -Wcast-qual warnings in ath's ar9300_attach.c, by making
the ia_array field of struct ar9300_ini_array const, and removing the
const-dropping casts.  No functional change.

Reviewed by:	adrian
MFC after:	3 days
Differential Revision: https://reviews.freebsd.org/D1725
2015-02-07 12:20:33 +00:00
Oleksandr Tymoshenko
262f27b29e Import VCHI driver for Broadcom's VideoCore IV GPU
Differential Revision:	D1753
2015-02-05 19:54:03 +00:00
Hans Petter Selasky
d39d7c8636 Add missing linuxapi module dependencies and always use the FreeBSD
"MODULE_VERSION" macro definition. Remove the redefinition of the
"MODULE_VERSION" macro from the Linux kernel compatibility API.

MFC after:	1 month
Reported by:	np@
Sponsored by:	Mellanox Technologies
2015-01-19 21:53:00 +00:00
Adrian Chadd
6ae52b27b6 Oops - use the correct argument order for ar9300_set_beacon().
(It's only an issue in AP/adhoc modes. But, still. Grr.)
2015-01-18 17:43:00 +00:00
Adrian Chadd
f590185223 Correct the descriptor length for AR9462/AR9565 and set the final field
to zero - TX drops are otherwise reported.

Tested:

* AR9462 (WB222), STA mode

Obtained from:	Linux ath9k
2015-01-17 17:37:08 +00:00
Adrian Chadd
091855cd9e Skip the OFDM weak signal threshold detection programming for
AR9462/AR9565.

This and some upcoming changes to the HAL for these chips should
address some of the signal sensitivity reported by users.

Tested:

* AR9462 (WB222), STA mode

Obtained from:	Linux ath9k
2015-01-17 17:31:47 +00:00
Adrian Chadd
e5acc52d45 Override the bt enable/disable methods for AR9462 (jupiter) and
AR9565 (Aphrodite.)  These need to use the MCI routines, not
the legacy 2-wire / 3-wire bluetooth coexistence methods.

Tested:

* AR9462 (WB222); STA mode
2015-01-17 06:43:30 +00:00
Adrian Chadd
38878c6343 Tie in the MCI bluetooth coexistence functions into the HAL.
Tested:

* AR9462 (WB222)
2015-01-16 23:48:28 +00:00
Robert Watson
2a8c860fe3 In order to reduce use of M_EXT outside of the mbuf allocator and
socket-buffer implementations, introduce a return value for MCLGET()
(and m_cljget() that underlies it) to allow the caller to avoid testing
M_EXT itself.  Update all callers to use the return value.

With this change, very few network device drivers remain aware of
M_EXT; the primary exceptions lie in mbuf-chain pretty printers for
debugging, and in a few cases, custom mbuf and cluster allocation
implementations.

NB: This is a difficult-to-test change as it touches many drivers for
which I don't have physical devices.  Instead we've gone for intensive
review, but further post-commit review would definitely be appreciated
to spot errors where changes could not easily be made mechanically,
but were largely mechanical in nature.

Differential Revision:	https://reviews.freebsd.org/D1440
Reviewed by:	adrian, bz, gnn
Sponsored by:	EMC / Isilon Storage Division
2015-01-06 12:59:37 +00:00
Adrian Chadd
bc6ee3cc93 Glue to suck in the QCA9550 HAL support if AH_SUPPORT_QCA9550 is defined. 2015-01-06 07:52:19 +00:00
Marius Strobl
182600f180 Use the same 6000 series g2{a,b} firmware versions when embedding these
images into the kernel as currently included into iwn6000g2{a,b}fw.ko
and delete the old files, missed in r254199 and r259135 respectively.

MFC after:	3 days
2014-12-27 17:10:35 +00:00
Cy Schubert
006e24e909 Correctly define constants.
MFC after:	1 week
2014-11-28 04:07:06 +00:00
Kevin Lo
f386f04f11 Add missing headers needed by write(). 2014-11-25 02:58:38 +00:00
Craig Rodrigues
f687a7c2dd Set the current vnet inside the ioctl handler for ipfilter.
Without this fix, the vnet was NULL and would crash.
This fix is similar to what was done inside the ioctl handler for PF.

Tested by:
   (1) Boot a kernel with "options VIMAGE" enabled
   (2) Type:

   echo "map lo0 from 10.0.0.0/24 to ! 10.0.0.0/24 -> 127.0.0.1/32" > /etc/ipnat.rules ; service ipnat onerestart

PR: 176992
Differential Revision: https://reviews.freebsd.org/D1191
Reviewed by: cy
2014-11-20 08:11:54 +00:00
Dimitry Andric
cfd2f3f928 Fix the following -Werror warning from clang 3.5.0, while building
lib/libngatm:

sys/contrib/ngatm/netnatm/saal/saal_sscop.c:4030:32: error: 'break' is bound to current loop, GCC binds it to the enclosing loop [-Werror,-Wgcc-compat]
                } while(sn < sscop->vr_h && !QFIND(&sscop->rbuf, sn));
                                             ^
sys/contrib/ngatm/netnatm/saal/saal_sscop.c:173:4: note: expanded from macro 'QFIND'
                        break;                                          \
                        ^
1 error generated.

The idea is to remove any ambiguity by replacing the macro with an
equivalent static inline function.

Reviewed by:	emaste, rpaulo
See also:	http://reviews.llvm.org/D2518
Differential Revision: https://reviews.freebsd.org/D1188
2014-11-19 07:47:37 +00:00
Navdeep Parhar
1fc7fdace0 krping: In verbose mode print only first 128 bytes of krping data.
Submitted by:	Hariprasad at Chelsio dot com.
Sponsored by:	Chelsio Communications
2014-10-27 22:41:55 +00:00
Hans Petter Selasky
2c6eb461a7 Update the OFED Linux compatibility layer and
Mellanox hardware driver(s):

- Properly name an inclusion guard
- Fix compile warnings regarding unsigned enums
- Add two new sysctl nodes
- Remove all empty linux header files
- Make an error printout more verbose
- Use "mod_delayed_work()" instead of
  cancelling and starting a timeout.
- Implement more Linux scatterlist
  functions.

MFC after:	3 days
Sponsored by:	Mellanox Technologies
2014-10-15 13:40:29 +00:00
Sean Bruno
7d25e50fdf Repair build of tools/ath/athalq and define missing value len.
Reviewed by:	adrian
2014-10-13 16:48:01 +00:00
Cy Schubert
2777bfabc0 ipfilter bug #537 NAT rules with sticky have incorrect hostmap IP address.
This fixes when an IP address mapping is put in the hostmap table for
sticky NAT rules, it ends up having the wrong byte order.

Obtained from:	ipfilter CVS repo (r1.102), NetBSD CVS repo (r1.12)
2014-10-05 03:58:30 +00:00
Cy Schubert
3a77b75120 ipfilter bug #534 destination list hashing not endian neutral
Obtained from:	ipfilter CVS repo (r1.26), NetBSD CVS repo (r1.8)
2014-10-05 03:52:09 +00:00
Cy Schubert
685545cdc7 ipfilter bug #538 ipf_p_dns_del should return void
Obtained from:	ipfilter cvs repo (r1.8)
2014-10-05 03:48:09 +00:00
Cy Schubert
a7bd2acdab ipfilter bug #554 Determining why a ipf rule matches is hard -- replace
ipfilter rule compare with new ipf_rule_compare() function.

Obtained from:	ipfilter CVS rep (r1.129)
2014-10-05 03:45:19 +00:00
Cy Schubert
7db9f2ba58 ipfiler bug #550 filter rule list corrupted with inserted rules
Obtained from:	ipfilter CVS repo (r1.128); NetBSD CVS repo (r1.15)
2014-10-05 03:41:47 +00:00
Jung-uk Kim
313a0c13ef Merge ACPICA 20140926. 2014-10-02 19:11:18 +00:00
Adrian Chadd
7093d16e92 Remove this stuff - it's no longer needed here. 2014-09-30 03:29:46 +00:00
Adrian Chadd
9389d5a95e Add initial support for the AR9485 CUS198 / CUS230 variants.
These variants have a few differences from the default AR9485 NIC,
namely:

* a non-default antenna switch config;
* slightly different RX gain table setup;
* an external XLNA hooked up to a GPIO pin;
* (and not yet done) RSSI threshold differences when
  doing slow diversity.

To make this possible:

* Add the PCI device list from Linux ath9k, complete with vendor and
  sub-vendor IDs for various things to be enabled;
* .. and until FreeBSD learns about a PCI device list like this,
  write a search function inspired by the USB device enumeration code;
* add HAL_OPS_CONFIG to the HAL attach methods; the HAL can use this
  to initialise its local driver parameters upon attach;
* copy these parameters over in the AR9300 HAL;
* don't default to override the antenna switch - only do it for
  the chips that require it;
* I brought over ar9300_attenuation_apply() from ath9k which is cleaner
  and easier to read for this particular NIC.

This is a work in progress.  I'm worried that there's some post-AR9380
NIC out there which doesn't work without the antenna override set as
I currently haven't implemented bluetooth coexistence for the AR9380
and later HAL.  But I'd rather have this code in the tree and fix it
up before 11.0-RELEASE happens versus having a set of newer NICs
in laptops be effectively RX deaf.

Tested:

* AR9380 (STA)
* AR9485 CUS198 (STA)

Obtained from:	Qualcomm Atheros, Linux ath9k
2014-09-30 03:19:29 +00:00
Cy Schubert
f88ccb8bee ipfilter bug #558 add in some missing frag table function comments.
Approved by:	glebius (mentor)
Obtained from:	ipfilter CVS repo (r1.36)
2014-09-24 01:21:31 +00:00
Cy Schubert
11eb83e638 Check for NULL before de-refencing; in particular sel is assigned to NULL,
in the default case, and then couple of lines down we do sel->

Approved by:	glebius (mentor)
Obtained from:	NetBSD CVS repo (r1.5)
2014-09-22 16:45:28 +00:00
Adrian Chadd
88c0971a31 Quieten the AR9300 HAL attach a little - the setupXTxDesc method
is only called during attach now.

The EDMA TX path never calls this - only the legacy TX path does.
2014-09-20 01:18:36 +00:00
Adrian Chadd
f3bf91638b Quieten the AR9300 HAL probe a bit. 2014-09-20 01:17:02 +00:00
Adrian Chadd
e0fc1dc35a Don't double-call the ar9300 stub function method. 2014-09-20 01:16:41 +00:00
Gleb Smirnoff
56b61ca27a Remove ifq_drops from struct ifqueue. Now queue drops are accounted in
struct ifnet if_oqdrops.

Some netgraph modules used ifqueue w/o ifnet. Accounting of queue drops
is simply removed from them. There were no API to read this statistic.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2014-09-19 09:01:19 +00:00
Adrian Chadd
720e6a9c6f Add iwn-100 firmware.
The firmware is from the Linux firmware git repository; the intel
licence is the same as other firmware blobs.

Tested: iwn1: <Intel Centrino Wireless-N 100> mem 0xf4800000-0xf4801fff irq 19 at device 0.0 on pci5
2014-08-28 00:05:02 +00:00
Hans Petter Selasky
c7818b48b6 - Update the OFED Linux Emulation layer as a preparation for a
hardware driver update from Mellanox Technologies.
- Remove empty files from the OFED Linux Emulation layer.
- Fix compile warnings related to printf() and the "%lld" and "%llx"
format specifiers.
- Add some missing 2-clause BSD copyrights.
- Add "Mellanox Technologies, Ltd." to list of copyright holders.
- Add some new compatibility files.
- Fix order of uninit in the mlx4ib module to avoid crash at unload
using the new module_exit_order() function.

MFC after:	1 week
Sponsored by:	Mellanox Technologies
2014-08-27 13:21:53 +00:00
Adrian Chadd
823b2cc633 Add some more OS_MARK() probes to the AR9300 HAL. 2014-08-11 00:03:50 +00:00