non-backward compatible changes in the format of packing list and handle
them gracefully;
- fix a longstanding issue with symlinks handling. Instead of recording
checksum for the file symlink points to, record checksum for the value
returned by readlink(2). For backward compatibility increase packing list
format minor version number and provide a fallback to a previous behaviour,
if package in question was created with older version of pkg_* tools;
Submitted by: Alec Wolman <wolman@cs.washington.edu>, sobomax
- don't record MD5 checksum for device nodes, fifo's and other non-regular
files.
Submitted by: nbm
MFC in: 2 weeks
allows for an easy way to backup old version of port prior to installing
a new one;
- silence compiler warnings by killing some unused variables and adding
all includes necessary.
MFC after: 2 weeks
1) Allow the sending of more than one control message at a time
over a unix domain socket. This should cover the PR 29499.
2) This requires that unp_{ex,in}ternalize and unp_scan understand
mbufs with more than one control message at a time.
3) Internalize and externalize used to work on the mbuf in-place.
This made life quite complicated and the code for sizeof(int) <
sizeof(file *) could end up doing the wrong thing. The patch always
create a new mbuf/cluster now. This resulted in the change of the
prototype for the domain externalise function.
4) You can now send SCM_TIMESTAMP messages.
5) Always use CMSG_DATA(cm) to determine the start where the data
in unp_{ex,in}ternalize. It was using ((struct cmsghdr *)cm + 1)
in some places, which gives the wrong alignment on the alpha.
(NetBSD made this fix some time ago).
This results in an ABI change for discriptor passing and creds
passing on the alpha. (Probably on the IA64 and Spare ports too).
6) Fix userland programs to use CMSG_* macros too.
7) Be more careful about freeing mbufs containing (file *)s.
This is made possible by the prototype change of externalise.
PR: 29499
MFC after: 6 weeks
allow to limit the prototype quota distribution (-p)
to a single filesystem. Useful when initializing
quotas on a newly added disk.
PR: bin/30816
Submitted by: Dmitry Morozovsky <marck@rinet.ru>
ethernet controllers. This adds support for the 3Com 3c996-T, the
SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on
Dell PowerEdge 2550 servers. The latter configuration hauls ass:
preliminary measurements show TCP speeds of over 900Mbps using
only normal size frames.
TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping
are supported, as well as interrupt moderation.
Still need to fix autonegotiation support for 1000baseSX NICs, but
beyond that, driver is pretty solid.
'lpc tclean'. In some obscure cases, the previous version could cause a
valid user job to be removed (by 'clean'), due to invalid assumptions in
the sort routine. This was a rare problem, unless ctlinfo.c is compiled
with 'LEAVE_TMPCF_FILES' turned on (to check what that rtn was doing).
Reviewed by: Lack of outcry on -audit and freebsd-print@bostonradio.org
MFC after: 10 days
floppies if you try to actually use it. This code will work fine if
you build and use sysinstall on a running system, since you have the
benefit of an installed termcap file. However, this code does not
work on an MFSROOT, where you must set the TERMCAP environment
variable properly. Unfortunately the quick fix of setting the TERMCAP
variable doesn't seem to fix the problem either. olgeni will add this
functionality back once it's been fully implemented (hopefully using
the working code in termcap.c).
PR: bin/30739
Submitted by: Alexey V. Neyman <alex.neyman@auriga.ru>
Discussed with / Pointy hat to: olgeni
MFC after: 3 days
survive a sysinstall Ctrl-C -> 'Restart'. This fixes another annoying
bug where restarting sysinstall will try to reload kernel modules and
do other external things that have already been done. For now, use
these persistent variables to keep track of module, usbd, and pccardd
initialization.
Bug found by: rwatson
MFC after: 1 week
environment. This fixes an annoying bug where hitting Ctrl-C and
telling sysinstall to 'restart' will do no such thing since many of
the options are still set and so you won't be prompted for them
again.
MFC after: 1 week
variable to check for debug functionality. Previously, you had to set
both 'debug' and 'SYSINSTALL_DEBUG' to get a log of sysinstall's
activities. Now, only 'debug' is necessary.
This was described in the original RFC wrt lpr, but most lpr's do not
actually implement it. There is some indication that MacOS 10.1 will
be using this when sending postscript files to print servers (that is
what "o"-type was supposed to signify -- postscript files).
MFC after: 1 week
- fix harmless compiler's warnings (unused variables and missed prototype);
- before refusing to delete package because "there are packages installed
that require this package" check that packages in question is actually
installed;
- add new `-r' option to pkg_delete(8), which instructs it to delete not only
packages specified at command line, but all packages that depend on
specified packages as well.
MFC after: 2 weeks
than really solve it. This approach (inspired by Ruslan's patch) solves
the real problem by stripping the local domain off the host name in the
config line structure.
Also mark a bunch of code sections that either do not check the return value
of a strdup(), malloc() or calloc() call, or do not properly handle a NULL
return.
1.64, i.e. July of last year. Also fix a minor style bug in the same code.
PR: bin/28634
Pointy hat to: dwmalone
Pointed out by: my buggy DSL router's remote logging facility
1. FreeBSD should be spelled with "F" and "BSD" in capitals,
even in comments.
2. Please don't use hard sentence breaks. Always start a
new sentence from the new line.
3. Don't use `#' or `$' in EXAMPLES; this has been fixed
recently in share/examples/mdoc/ templates.
4. Nuke the prog_name variable burncd.c, use getprogname(3).
correct mode via ancontrol, you can use bpf to sniff raw 802.11 frames.
Who want's to port AirSnort. ;-)
Submitted by: Doug Ambrisko <ambrisko@ambrisko.com> (author)
David Wolfskill <david@catwhisker.org> (port to current)
__unused, and change local variables named `sin' (struct
sockaddr_in) to `sin4'. (`sin' conflicts with the definition of
sin(3), which gcc assumes to be defined even if math.h isn't
included (it's a builtin). This is probably a bug in gcc.)
- Apply WARNS=1. WARNS=2 was not used because this program assigns
string literals to (struct iovec).iov_base for writing, and the only
clean way to silence -Wwrite-strings in that case would be to
strdup() and consequently free() those literals, which I considered
too disruptive.
Reviewed by: bde (partially)
for each option in the DHCP lease file. The DHCP lease parsing code
specifically ignores more than the first nameserver, but it didn't
previously deal with the case of more than one router. This caused
segfaults and a painful death when installing on a network with
multiple routers.
PR: misc/16003
COPTS towards the end of final CFLAGS so that it can be used to
override Makefile and other defaults. Using it in Makefiles risks
having options set using it clobbered when somebody uses it on the
command line.
Approved by: bde
doesn't talk about these files elsewhere, doesn't use the files by
default, and the names are dependent on site-specific newsyslog
configuration.
PR: 30348
Submitted by: Giorgos Keramidas <charon@labs.gr>
interactive case. This already works for non-interactive installs,
but at least one user thinks it would be useful and it certainly seems
more correct to allow it here as well.
So, this will now work :
# sysinstall netDev=fxp0 tcpMenuSelect
PR: bin/30229
Submitted by: Mikhail Teterin <mi@aldan.algebra.com>
This will now allow sysinstall to work properly if a FreeBSD CD/DVD is
already mounted as /cdrom, instead of just crapping out when it tries
to mount as /dist and gets EBUSY.
PR: conf/28081
Tested by: jhb
useful for post install configuration or other cases that might not be
handled by usb.c. (usb.c already sets usbd_enable iff sysinstall
detects usb during install).
PR: bin/18946
Submitted by: Peter van Heusden <pvh@egenetics.com>
Reviewed by: jhb
and RTSOL in sysinstall. If the respective TRY_FOO variable is set to
"YES" then it will be tried without prompting the user.
However, if the TRY_FOO variable is set to "NO" then the user will not
be prompted for a choice. This is the correct behavior, since we want
people to be able to script sysinstall in either case.
However, the default TRY_FOO variable has been "NO" since 1999. This
is incorrect, and when the logic was corrected in tcpip.c this has the
effect of never giving the user a choice to use DHCP or IPv6. The
value should be undefined until it is set by a script or by the user.
Submitted by: Randy Pratt, Chern Lee, many others.
UPGRADE.TXT along with a YesNo dialog requesting confirmation of
the upgrade. During the transition to RELNOTESng, UPGRADE.TXT got
folded into a file that eventually renders as INSTALL.TXT, which
makes sysinstall complain about a non-existent file. As a
solution/workaround, point the user at INSTALL.TXT, and then request
confirmation.
Noticed by: rpratt (on 4.4-RC3)
Approved by: jkh
1) Removed the low-level (unneeded in this context) details on
escape sequences that are already documented in screen(4).
2) Removed whitespace at EOL.
3) Removed the garbage from previous revision.
16 bits access is required by nsp driver to work in SMIT mode.
Since previously (1.65 and before in current, and 1.46.28 and before
in stable branch) 16 bits access was default, I hope it will break nothing.
Okayed-by: imp
mail, if configured to do so. Some sites have setups where the user's
mail is delivered to their home directory, so sending mail before is
exists didn't work.
PR: 29892
added but not its postrequisite -ltermcap.
Fixed breakage of DPADD in previous commit. ${LIBREADLINE} was misspelled
-lreadline. This should have been fatal since there is no file named
-lreadline, but it worked because of an undcumented bugfeature in make(1)
(or its configuration files): missing source files named -l* are silently
assumed to be up to date libraries. `make checkdpadd' also fails to detect
this error.
assignment of `l' in `gr_update' to the return value of snprintf. It
claimed to have fixed the case where snprintf returned -1--in fact, it
broke the entire routine. Not setting `l' here causes fileupdate() to
invariably fail with EINVAL because it does its own check to assert
that the parameter isn't -1.
for ntp-4.1.0.
Unfortunately, David Mills insists on managing the documentation in
such a way as to make it impossible for me to make things easy on our
translators, without printing out the documentation and reading through
it side-by-side with a finger on each page.
post-configuration "Startup" menu. In the event that diskcheckd is
removed, this can easily be trimmed also; in the mean time, it allows
diskcheckd to be easily disabled using our documented management
tool
the system on which it is running. The hostname is reloaded when
'HUPped' and a log message generated to note a change (before anyone
points it out, this is not an added security feature).
PR: bin/24444
Reviewed by: freebsd-audit
Approved by: ru
MFC after: 2 weeks
dictionaries are out of sync.
This avoids the complications that happen when our original reset
request gets lost in transit (quite likely in hind sight, given a
lossy link) when we end up ignoring the peer for the next (up to)
256 packets.
Submitted by: Nick Sayer <nsayer@quack.kfu.com>
originally written in January, 2000, but have been substantially updated.
- No longer use hz/stathz and the CPU times in computing the TTY stats,
but rather use etime, like the disk stats.
- Clean up malloc/realloc failure tests.
- Use a new integrated routine to fetch devstat information via sysctl or
KVM.
- Get rid of the X() macro for calculating CPU stats
- Use rint() on the CPU state display to avoid truncation errors. (this
requires libm)
- Clean up flag usage somewhat.
Reviewed by: bde
when we ioctl(TUNSIFINFO) under OpenBSD)
o Don't bring the interface up immediately
o Don't complain about unrecognised interface flags in ``show iface''.
the size of the tsp_name field is OS-dependent. 4.3BSD used a 32-byte
field, FreeBSD uses MAXHOSTNAMELEN and RedHat apparently uses a 64-byte
field. As a result, sanity checking code added a few months ago to detect
short packets will fail when interoperating with one of these other vendors.
Change the short packet detection code to expect a minimum packet size
corresponding to the 4.3BSD implementation, which should be a safe minimum
size.
Submitted by: Stephen Whiteley <stevew@best.com> (based on)
PR: misc/29867
and mask to the routing socket, otherwise the update fails.
Warning provided by: markm
The code here was broken for FreeBSD when IPv6 support was added, but
was fixed for OpenBSD. OpenBSD expects the gateway and mask to be
supplied and fails the update otherwise.
on older kernels correctly. Terminate the loop when we find a
suitable irq. Also, only try to select from the pool. Cleaned up the
two cases (IRQ picked by the user and ?) into one.
MFC upon re approval.
and implement a far more subtle and correct fix.
The reason behind the infinite loop was that ppp was trying to make up
initial IPv6 numbers and wasn't giving up when it failed unexpectedly to
assign the addresses it just fabricated to it's interface (thinking that
the reason was because another interface was using the same address).
It now attempts this up to 100 times before just failing and trying to
muddle along (in reality, this should never happen more than a couple
of times unless our random number generator doesn't work).
Also, when IPv6 is not available, don't even try to assign the IPv6
interface address in the first place...
monthly and weekly, respectively. Also fix the @yearly shortcut so
that it doesn't execute daily during January. OpenBSD and NetBSD also
appear to have this bug.
PR: bin/21152
sizes on a route.
IMHO this shouldn't be necessary (the destination & mask/prefixlen
should be enough), but without it, the default route update under
OpenBSD will fail.
Thanks to: Russell T Hunt <alaric@MIT.EDU>
the name for the moderate security profile is "moderate", not
"medium", so update this one reference to it as "medium".
This is a 4.4-RELEASE MFC candidate.
MFC after: 2 days
Add a timestamp to the comment so that it's possible to see when
changes were made.
e.g.:
# -- sysinstall generated deltas -- # Wed Aug 15 18:10:20 2001
progs prog1
special prog1 objdir ../../prog1/obj
special prog1 objs prog1.o
This fixes a bug that I introduced around the time of 4.2-release.
Reported by: Larry Baird <lab@gta.com>
