We introduced hostname canonicalization in 2002, while upstream OpenSSH
added similar support in 2014.
It would be good to review our handling of CNAMEs in hostname
canonicalization.
Sponsored by: The FreeBSD Foundation
Administrators can enable it if required.
Reviewed by: bz, kevans
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37411
Release notes are available at https://www.openssh.com/txt/release-9.2
OpenSSH 9.2 contains fixes for two security problems and a memory safety
problem. The memory safety problem is not believed to be exploitable.
These fixes have already been committed to OpenSSH 9.1 in FreeBSD.
Some other notable items from the release notes:
* ssh(1): add a new EnableEscapeCommandline ssh_config(5) option that
controls whether the client-side ~C escape sequence that provides a
command-line is available. Among other things, the ~C command-line
could be used to add additional port-forwards at runtime.
* sshd(8): add support for channel inactivity timeouts via a new
sshd_config(5) ChannelTimeout directive. This allows channels that
have not seen traffic in a configurable interval to be
automatically closed. Different timeouts may be applied to session,
X11, agent and TCP forwarding channels.
* sshd(8): add a sshd_config UnusedConnectionTimeout option to
terminate client connections that have no open channels for a
length of time. This complements the ChannelTimeout option above.
* sshd(8): add a -V (version) option to sshd like the ssh client has.
* scp(1), sftp(1): add a -X option to both scp(1) and sftp(1) to
allow control over some SFTP protocol parameters: the copy buffer
length and the number of in-flight requests, both of which are used
during upload/download. Previously these could be controlled in
sftp(1) only. This makes them available in both SFTP protocol
clients using the same option character sequence.
* ssh-keyscan(1): allow scanning of complete CIDR address ranges,
e.g. "ssh-keyscan 192.168.0.0/24". If a CIDR range is passed, then
it will be expanded to all possible addresses in the range
including the all-0s and all-1s addresses. bz#976
* ssh(1): support dynamic remote port forwarding in escape
command-line's -R processing. bz#3499
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
never write a name with bad characters to a known_hosts file.
replace recently-added valid_domain() check for hostnames going to
known_hosts with a more relaxed check for bad characters.
Obtained from: OpenSSH-portable commit 445363433ba2
Obtained from: OpenSSH-portable commit 3cae9f92a318
Sponsored by: The FreeBSD Foundation
its first argument unless it was one of the special keywords "any" or
"none".
Obtained from: OpenSSH-portable commit b3daa8dc5823
Sponsored by: The FreeBSD Foundation
ssh_config and ssh_config.5 no longer contain the VersionAddendum,
so remove instructions to update these files.
Fixes: bffe60ead0 ("ssh: retire client VersionAddendum")
Sponsored By: The FreeBSD Foundation
We documented "[Use]PrivilegeSeparation defaults to sandbox" as one of
our modifications to ssh's server-side defaults, but this is not (any
longer) a difference from upstream.
Sponsored by: The FreeBSD Foundation
kadm5_c_get_principal() should check the return code from
kadm5_ret_principal_ent(). As it doesn't it assumes success when
there is none and can lead to potential vulnerability. Fix this.
Reported by: rtm@csail.mit.edu
MFC after: 3 days
Zero length client requests result in a bus fault when attempting to
free malloc()ed pointers within the requests softc. Return an error
when the request is zero length.
This properly fixes PR/268062 without regressions.
PR: 268062
Reported by: Robert Morris <rtm@lcs.mit.edu>
MFC after: 3 days
Zero length client requests result in a bus fault when attempting to
free malloc()ed pointers within the requests softc. Return an error
when the request is zero length.
PR: 268062
Reported by: Robert Morris <rtm@lcs.mit.edu>
MFC after: 3 days
A malformed principal will cause kadmind to segfault. The PR
addresses only when chpass is requested but delete is also affected.
Fix both.
PR: 268002
Reported by: Robert Morris <rtm@lcs.mit.edu>
MFC after: 3 days
krb5_ret_preincipal() returns a non-zero return code when
a garbage principal is passed to it. Unfortunately ret_principal_ent()
does not check the return code, with garbage pointing to what would
have been the principal. This results in a segfault when free() is
called.
PR: 267944, 267972
Reported by: Robert Morris <rtm@lcs.mit.edu>
MFC after: 3 days
In addition to garbage realm data, also handle garbage dbname, acl_file,
stash_file, and invalid bitmask garbage data.
PR: 267912
Reported by: Robert Morris <rtm@lcs.mit.edu>
MFC after: 3 days
Fix a NULL dereference in _kadm5_s_init_context() when the client
sends a mangled realm message.
PR: 267912
Reported by: Robert Morris <rtm@lcs.mit.edu>
MFC after: 3 days
Should the sender send a string without a terminating NUL, ensure that
the NUL terminates the string regardless.
And while at it only process the version string when bytes are returned.
PR: 267884
Reported by: Robert Morris <rtm@lcs.mit.edu>
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D37471
Part of ed549cb0c5 zeroed out a data structure in the resulting code-file
when a TUTCTime type was freed. This part of the patch applies to Heimdal
7.1+ and not our Heimdal 1.5.2.
PR: 267827
Reported by: Peter Much <pmc@citylink.dinoex.sub.org>
Tested by: Peter Much <pmc@citylink.dinoex.sub.org>
Fixes: ed549cb0c5
MFC after: TBD with philip@
The following issues are patched:
- CVE-2022-42898 PAC parse integer overflows
- CVE-2022-3437 Overflows and non-constant time leaks in DES{,3} and arcfour
- CVE-2021-44758 NULL dereference DoS in SPNEGO acceptors
- CVE-2022-44640 Heimdal KDC: invalid free in ASN.1 codec
Note that CVE-2022-44640 is a severe vulnerability, possibly a 10.0
on the Common Vulnerability Scoring System (CVSS) v3, as we believe
it should be possible to get an RCE on a KDC, which means that
credentials can be compromised that can be used to impersonate
anyone in a realm or forest of realms.
Heimdal's ASN.1 compiler generates code that allows specially
crafted DER encodings of CHOICEs to invoke the wrong free function
on the decoded structure upon decode error. This is known to impact
the Heimdal KDC, leading to an invalid free() of an address partly
or wholly under the control of the attacker, in turn leading to a
potential remote code execution (RCE) vulnerability.
This error affects the DER codec for all extensible CHOICE types
used in Heimdal, though not all cases will be exploitable. We have
not completed a thorough analysis of all the Heimdal components
affected, thus the Kerberos client, the X.509 library, and other
parts, may be affected as well.
This bug has been in Heimdal's ASN.1 compiler since 2005, but it may
only affect Heimdal 1.6 and up. It was first reported by Douglas
Bagnall, though it had been found independently by the Heimdal
maintainers via fuzzing a few weeks earlier.
While no zero-day exploit is known, such an exploit will likely be
available soon after public disclosure.
- CVE-2019-14870: Validate client attributes in protocol-transition
- CVE-2019-14870: Apply forwardable policy in protocol-transition
- CVE-2019-14870: Always lookup impersonate client in DB
Sponsored by: so (philip)
Obtained from: so (philip)
Tested by: philip, cy
MFC after: immediately
Old versions of FreeBSD do not support using id 0 to refer to the
current pid for procctl, so pass getpid() explicitly.
Although this is not required in current FreeBSD branches I am merging
it to reduce differences with upstream.
Obtained from: OpenSSH commit 0f7e1eba5525
This appeared to be a copy-paste error from the "from" time case above.
Reported by: Coverity Scan
CID: 1500407
Reviewed by: markj
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37252
Release notes are available at https://www.openssh.com/txt/release-9.1
9.1 contains fixes for three minor memory safety problems; these have
lready been merged to the copy of OpenSSH 9.0 that is in the FreeBSD base
system.
Some highlights copied from the release notes:
Potentially-incompatible changes
--------------------------------
* ssh(1), sshd(8): SetEnv directives in ssh_config and sshd_config
are now first-match-wins to match other directives. Previously
if an environment variable was multiply specified the last set
value would have been used. bz3438
* ssh-keygen(8): ssh-keygen -A (generate all default host key types)
will no longer generate DSA keys, as these are insecure and have
not been used by default for some years.
New features
------------
* ssh(1), sshd(8): add a RequiredRSASize directive to set a minimum
RSA key length. Keys below this length will be ignored for user
authentication and for host authentication in sshd(8).
* sftp-server(8): add a "users-groups-by-id@openssh.com" extension
request that allows the client to obtain user/group names that
correspond to a set of uids/gids.
* sftp(1): use "users-groups-by-id@openssh.com" sftp-server
extension (when available) to fill in user/group names for
directory listings.
* sftp-server(8): support the "home-directory" extension request
defined in draft-ietf-secsh-filexfer-extensions-00. This overlaps
a bit with the existing "expand-path@openssh.com", but some other
clients support it.
* ssh-keygen(1), sshd(8): allow certificate validity intervals,
sshsig verification times and authorized_keys expiry-time options
to accept dates in the UTC time zone in addition to the default
of interpreting them in the system time zone. YYYYMMDD and
YYMMDDHHMM[SS] dates/times will be interpreted as UTC if suffixed
with a 'Z' character.
Also allow certificate validity intervals to be specified in raw
seconds-since-epoch as hex value, e.g. -V 0x1234:0x4567890. This
is intended for use by regress tests and other tools that call
ssh-keygen as part of a CA workflow. bz3468
* sftp(1): allow arguments to the sftp -D option, e.g. sftp -D
"/usr/libexec/sftp-server -el debug3"
* ssh-keygen(1): allow the existing -U (use agent) flag to work
with "-Y sign" operations, where it will be interpreted to require
that the private keys is hosted in an agent; bz3429
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
We no longer use the pre- and post-merge scripts to strip/add RCS tags.
The tags have been removed from main, but persist on older branches.
While here renumber the steps in the update documentation using a more
conventional scheme.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36904
Nanobsd included copies of ssh_config and sshd_config. The former is
identical to the one provided by the base system, and the latter is
identical except for PermitRootLogin, which is updated by nanobsd's
cust_allow_ssh_root anyhow. Remove nanobsd's copies and use the
existing base system ones.
Reported by: Jose Luis Duran <jlduran@gmail.com> in D34937
Reviewed by: Jose Luis Duran <jlduran@gmail.com>, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36933
Rename "HPN" to more general "Retired patches." We handle two now-
removed patches the same way: to avoid breaking existing configurations
we accept, but ignore, the option.
Sponsored by: The FreeBSD Foundation
FreeBSD introduced VersionAddendum for the server as a local change in
2001 in commit 933ca70f8f and later extended it to the client in
commit 9e2cbe04ff.
In 2012 upstream added support for server VersionAddendum, in commit
23528816dc10. They do not support it for the client.
The argument for supporting this in the client is not nearly as strong
as for the server, so retire this option to reduce the scope of our
local patch set. This also avoids some cases of conflicts in ssh_config
during update, as a user's configuration would typically follow the
commented-out default VersionAddendum value.
Reviewed by: gordon, glebius
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32930
Passwords may be accepted by both the PasswordAuthentication and
KbdInteractiveAuthentication authentication schemes. Add a reference to
the latter in the description/comment for PasswordAuthentication, as it
otherwise may seem that "PasswordAuthentication no" implies passwords
will be disallowed.
This situation should be clarified with more extensive documentation on
the authentication schemes and configuration options, but that should be
done in coordination with upstream OpenSSH. This is a minimal change
that will hopefully clarify the situation without requiring an extensive
local patch set.
PR: 263045
Reviewed by: manu (earlier version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35272
The PermitRootLogin option "prohibit-password" was added as a synonym
for "without-password" in 2015. Then in 2017 these were swapped:
"prohibit-password" became the canonical option and "without-password"
became a deprecated synonym (in OpenSSH commit 071325f458).
The UsePAM description in sshd_config still mentioned
"without-password." Update it to match the new canonical option.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This removes a guard condition that prevents KTLS being enabled for
receiving in TLS 1.3. Use the correct sequence number and BIO for
receive vs transmit offload.
Approved by: jkim
Obtained from: OpenSSL commit 7c78932b9a4330fb7c8db72b3fb37cbff1401f8b
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D34976