- Correct the PCI ID for the 8169SC/8110SC in the device list (I added
the macro for it to if_rlreg.h before, but forgot to use it.)
- Remove the extra interrupt spinlock I added previously. After giving it
some more thought, it's not really needed.
- Work around a hardware bug in some versions of the 8169. When sending
very small IP datagrams with checksum offload enabled, a conflict can
occur between the TX autopadding feature and the hardware checksumming
that can corrupt the outbound packet. This is the reason that checksum
offload sometimes breaks NFS: if you're using NFS over UDP, and you're
very unlucky, you might find yourself doing a fragmented NFS write where
the last fragment is smaller than the minimum ethernet frame size (60
bytes). (It's rare, but if you keep NFS running long enough it'll
happen.) If checksum offload is enabled, the chip will have to both
autopad the fragment and calculate its checksum header. This confuses
some revs of the 8169, causing the packet that appears on the wire
to be corrupted. (The IP addresses and the checksum field are mangled.)
This will cause the NFS write to fail. Unfortunately, when NFS retries,
it sends the same write request over and over again, and it keeps
failing, so NFS stays wedged.
(A simple way to provoke the failure is to connect the failing system
to a network with a known good machine and do "ping -s 1473 <badhost>"
from the good system. The ping will fail.)
Someone had previously worked around this using the heavy-handed
approahch of just disabling checksum offload. The correct fix is to
manually pad short frames where the TCP/IP stack has requested
checksum offloading. This allows us to have checksum offload turned
on by default but still let NFS work right.
- Not a bug, but change the ID strings for devices with hardware rev
0x30000000 and 0x38000000 to both be 8168B/8111B. According to RealTek,
they're both the same device, but 0x30000000 is an earlier silicon spin.
This was missed the first time around since eng_padlock.c was not part
of OpenSSL 0.9.7e and therefor did not have the v0_9_7e CVS tag used
during original resolve of conflicts.
Noticed by: Antoine Brodin <antoine.brodin@laposte.net>
increases performance when extracting a single entry from a large
uncompressed archive, especially on slow devices such as USB hard
drives.
Requires a number of changes:
* New archive_read_open2() supports a 'skip' client function
* Old archive_read_open() is implemented as a wrapper now, to
continue supporting the old API/ABI.
* _read_open_fd and _read_open_file sprout new 'skip' functions.
* compression layer gets a new 'skip' operation.
* compression_none passes skip requests through to client.
* compression_{gzip,bzip2,compress} simply ignore skip requests.
Thanks to: Benjamin Lutz, who designed and implemented the whole thing.
I'm just committing it. ;-)
TODO: Need to update the documentation a little bit.
pax wasn't introduced until the 1993 (?) revision.
(I need to double-check when pax was introduced and
clarify some of the history here. In particular,
I should explain that the 'pax' standard now owns the
'ustar' format spec.)
perform the reboot action via the reset register instead of our legacy
method. Default is 0 (use legacy). This is needed because some systems
hang on reboot even though they claim to support the reset register.
MFC after: 2 days
cannot easily be analyzed due to there being no debugger yet.
The SIGSEGV only happens when kldxref is linked shared.
Since kldxref(8) is needed for a release build, having it not
dump core is important.
that immediately follows the only call to it. maketempfile() uses
mkstemp(), so the temporary file has already been opened and using
fopen() again just opens the file twice. This also fixes the invalid
mode used on the fopen().
While here, assign NULL to fxref after fclose() because we test for
fxref being !NULL to determine if we have the (temporary) hints file
open.
and pc98 MD files. Remove nodevice and nooption lines specific
to sio(4) from ia64, powerpc and sparc64 NOTES. There were no
such lines for arm yet.
sio(4) is usable on less than half the platforms, not counting
a future mips platform. Its presence in MI files is therefore
increasingly becoming a burden.
runtime using BN_CTX_new(). This is done since in OpenSSL 0.9.7e we
can only allocate BN_CTX on the stack by including an internal OpenSSL
header file, and in OpenSSL 0.9.8 BN_CTX is entirely opaque, so having
it on the stack is not possible at all.
This is done as preparation for OpenSSL 0.9.8b import.
Tested on: amd64 i386 ia64
Tested with: src/tools/regression/lib/libmp
what's going on in cases where the "state engine" doesn't act as
expected, e.g. in the case of a list not being closed in the manual
page being parsed.
- Bump copyright year.
MFC after: 1 week
This confused the manual page -> hardware notes perl script somewhat and
resulted in part of the output for the stge(4) entry not to be present
in the hardware notes.
Noticed by: brueffer
mark system calls as being MPSAFE:
- Stop conditionally acquiring Giant around system call invocations.
- Remove all of the 'M' prefixes from the master system call files.
- Remove support for the 'M' prefix from the script that generates the
syscall-related files from the master system call files.
- Don't explicitly set SYF_MPSAFE when registering nfssvc.
- fix "No sound in KDE":
The problem is related to the implementation of Envy24(1712) hardware
mixer support in the driver. Envy24(1712) has very precise 36bit wide
hardware mixer, which is superior that vchans (software sound mixer in
the kernel). The driver supports Envy24(1712) hardware mixer, so up to
10 channels (5 stereo pairs) can be playback simultaneously.
However, there are problems with the implementation of Envy24(1712)
hardware mixer support in the driver, one of them is the problem with
"no sound in KDE":
When playing back several channels simultaneously and
stoping one of the channels, sound starts to stutter and
plays at very low speed.
Another problem is:
Playing back simultaneously more than one 24bit/32bit
sound file or 16bit sound file and 24bit/32bit sound
file doesn't work as expected.
Submitted by: "Konstantin Dimitrov" <kosio.dimitrov@gmail.com>
except for s_family (which is read-only once after it is set when the
structure is created).
- Mark svr4_sys_ioctl(), svr4_sys_getmsg(), and svr4_sys_putmsg() MPSAFE.
including to printf(). Using uintmax_t is also robust to further
extensions in both the C language and the bitwidth of kernel counters.
Tested on: i386 amd64 ia64
It is by no means expected to perform a complete test of the library
for correctness, but is meant to test the API to make sure libmp (or
libcrypto) updates don't totally break the library.
