vm_page_startup(). As a result, we now only lookup the tunable once
instead of looking it up once for every physical page of memory in the
system. This cuts out about a 1 second or so delay in boot on x86
systems. The delay is much larger and more noticable on sun4v apparently.
Reported by: kmacy
MFC after: 1 week
There is a race with the current locking scheme and removing
it should have no measurable performance impact.
This fixes page faults leading to panics in pmap_enter_quick_locked()
on amd64/i386.
Reviewed by: alc,jhb,peter,ps
Found mapped cache page. Specifically, if cnt.v_free_count dips below
cnt.v_free_reserved after p_start has been set to a non-NULL value,
then vm_map_pmap_enter() would break out of the loop and incorrectly
call pmap_enter_object() for the remaining address range. To correct
this error, this revision truncates the address range so that
pmap_enter_object() will not map any cache pages.
In collaboration with: tegge@
Reported by: kris@
These pages are allocated from the direct map, and were not previous
tracked. This included the vm_page_array and the early UMA bootstrap
pages.
Reviewed by: peter
vmspace_exitfree() and vmspace_free() which could result in the same
vmspace being freed twice.
Factor out part of exit1() into new function vmspace_exit(). Attach
to vmspace0 to allow old vmspace to be freed earlier.
Add new function, vmspace_acquire_ref(), for obtaining a vmspace
reference for a vmspace belonging to another process. Avoid changing
vmspace refcount from 0 to 1 since that could also lead to the same
vmspace being freed twice.
Change vmtotal() and swapout_procs() to use vmspace_acquire_ref().
Reviewed by: alc
report this as an allocation failure for the item type. The failure
will be separately recorded with the bucket type. This my eliminate
high mbuf allocation failure counts under some circumstances, which
can be alarming in appearance, but not actually a problem in
practice.
MFC after: 2 weeks
Reported by: ps, Peter J. Blok <pblok at bsd4all dot org>,
OxY <oxy at field dot hu>,
Gabor MICSKO <gmicskoa at szintezis dot hu>
via the debug.minidump sysctl and tunable.
Traditional dumps store all physical memory. This was once a good thing
when machines had a maximum of 64M of ram and 1GB of kvm. These days,
machines often have many gigabytes of ram and a smaller amount of kvm.
libkvm+kgdb don't have a way to access physical ram that is not mapped
into kvm at the time of the crash dump, so the extra ram being dumped
is mostly wasted.
Minidumps invert the process. Instead of dumping physical memory in
in order to guarantee that all of kvm's backing is dumped, minidumps
instead dump only memory that is actively mapped into kvm.
amd64 has a direct map region that things like UMA use. Obviously we
cannot dump all of the direct map region because that is effectively
an old style all-physical-memory dump. Instead, introduce a bitmap
and two helper routines (dump_add_page(pa) and dump_drop_page(pa)) that
allow certain critical direct map pages to be included in the dump.
uma_machdep.c's allocator is the intended consumer.
Dumps are a custom format. At the very beginning of the file is a header,
then a copy of the message buffer, then the bitmap of pages present in
the dump, then the final level of the kvm page table trees (2MB mappings
are expanded into a 4K page mappings), then the sparse physical pages
according to the bitmap. libkvm can now conveniently access the kvm
page table entries.
Booting my test 8GB machine, forcing it into ddb and forcing a dump
leads to a 48MB minidump. While this is a best case, I expect minidumps
to be in the 100MB-500MB range. Obviously, never larger than physical
memory of course.
minidumps are on by default. It would want be necessary to turn them off
if it was necessary to debug corrupt kernel page table management as that
would mess up minidumps as well.
Both minidumps and regular dumps are supported on the same machine.
if the specified priority is zero. This avoids a race where the calling
thread could read a snapshot of it's current priority, then a different
thread could change the first thread's priority, then the original thread
would call sched_prio() inside msleep() undoing the change made by the
second thread. I used a priority of zero as no thread that calls msleep()
or tsleep() should be specifying a priority of zero anyway.
The various places that passed 'curthread->td_priority' or some variant
as the priority now pass 0.
Kernel changes:
Inform hwpmc of executable objects brought into the system by
kldload() and mmap(), and of their removal by kldunload() and
munmap(). A helper function linker_hwpmc_list_objects() has been
added to "sys/kern/kern_linker.c" and is used by hwpmc to retrieve
the list of currently loaded kernel modules.
The unused `MAPPINGCHANGE' event has been deprecated in favour
of separate `MAP_IN' and `MAP_OUT' events; this change reduces
space wastage in the log.
Bump the hwpmc's ABI version to "2.0.00". Teach hwpmc(4) to
handle the map change callbacks.
Change the default per-cpu sample buffer size to hold
32 samples (up from 16).
Increment __FreeBSD_version.
libpmc(3) changes:
Update libpmc(3) to deal with the new events in the log file; bring
the pmclog(3) manual page in sync with the code.
pmcstat(8) changes:
Introduce new options to pmcstat(8): "-r" (root fs path), "-M"
(mapfile name), "-q"/"-v" (verbosity control). Option "-k" now
takes a kernel directory as its argument but will also work with
the older invocation syntax.
Rework string handling in pmcstat(8) to use an opaque type for
interned strings. Clean up ELF parsing code and add support for
tracking dynamic object mappings reported by a v2.0.00 hwpmc(4).
Report statistics at the end of a log conversion run depending
on the requested verbosity level.
Reviewed by: jhb, dds (kernel parts of an earlier patch)
Tested by: gallatin (earlier patch)
be called without any vnode locks held. Remove calls to vn_start_write() and
vn_finished_write() in vnode_pager_putpages() and add these calls before the
vnode lock is obtained to most of the callers that don't already have them.
object that requires Giant in vm_object_deallocate(). This is somewhat
hairy in that if we can't obtain Giant directly, we have to drop the
object lock, then lock Giant, then relock the object lock and verify that
we still need Giant. If we don't (because the object changed to OBJT_DEAD
for example), then we drop Giant before continuing.
Reviewed by: alc
Tested by: kris
and it has not plenty of free pages it tries to free pages in the cache queue.
Unfortunately freeing a cached page requires the locking of the object that
owns the page. However in the context of allocating pages we may not be able
to lock the object and thus can only TRY to lock the object. If the locking try
fails the cache page can not be freed and is activated to move it out of the way
so that we may try to free other cache pages.
If all pages in the cache belong to objects that are currently locked the
cache queue can be emptied without freeing a single page. This scenario caused
two problems:
1) vm_page_alloc always failed allocation when it tried freeing pages from
the cache queue and failed to do so. However if there are more than
cnt.v_interrupt_free_min pages on the free list it should return pages
when requested with priority VM_ALLOC_SYSTEM. Failure to do so can cause
resource exhaustion deadlocks.
2) Threads than need to allocate pages spend a lot of time cleaning up the
page queue without really getting anything done while the pagedaemon
needs to work overtime to refill the cache.
This change fixes the first problem. (1)
Reviewed by: tegge@
lock also protects this flag so it is not necessary.
- Don't rely on v_mount to detect whether or not we've been recycled, use
the more appropriate VI_DOOMED instead.
Sponsored by: Isilon Systems, Inc.
MFC After: 1 week
The former type, size_t, was causing truncation to 32 bits on i386,
which immediately led to undersizing of VM objects backed by
files >4GB. In particular, sendfile(2) was broken for such files.
PR: kern/92243
MFC after: 5 days
It detects both: buffer underflows and buffer overflows bugs at runtime
(on free(9) and realloc(9)) and prints backtraces from where memory was
allocated and from where it was freed.
Tested by: kris
of physical RAM instead of the bottom was a sound idea, but the implementation
left a lot to be desired. Scans would spend considerable time looking at
pages that are above of the address range given by the caller, and multiple
calls (like what happens in busdma) would spend more time on top of that
rescanning the same pages over and over.
Solve this, at least for now, with two simple optimizations. The first is
to not bother scanning high ordered pages that are outside of the provided
address range. Second is to cache the page index from the last successful
operation so that subsequent scans don't have to restart from the top. This
is conditional on the numpages argument being the same or greater between
calls.
MFC After: 2 weeks
The difference between WITNESS_CHECK() and WITNESS_WARN() is that
WITNESS_CHECK() should be used in the places that the return value of
witness_warn() is checked, whereas WITNESS_WARN() should be used in places
where the return value is ignored. Specifically, in a kernel without
WITNESS enabled, WITNESS_WARN() evaluates to an empty string where as
WITNESS_CHECK evaluates to 0. I also updated the one place that was
checking the return value of WITNESS_WARN() to use WITNESS_CHECK.
they are. They should be NULL at this point, except if we're coming from
swapdev_strategy().
It should only affect the case where we're swapping directly on a file over
NFS.
the resident page count matches the object size. We know it fully backs
its parent in this case.
Reviewed by: acl, tegge
Sponsored by: Isilon Systems, Inc.
statement. Specifically, a break statement that previously broke out of
the enclosing switch was not changed. Consequently, the enclosing loop
terminated prematurely.
This could result in "vm_page_insert: page already inserted" panics.
Submitted by: tegge
