Previously the linuxulator's linux_brk invoked the FreeBSD sys_break
syscall implementation directly. Instead, move the bulk of the existing
implementation to kern_break, and call that from both sys_break and
linux_brk.
This also addresses a minor bug in linux_brk in that we now return the
actual (rounded up) break address, rather than the requested value.
Reviewed by: brooks (earlier version)
Sponsored by: Turing Robotic Industries
Differential Revision: https://reviews.freebsd.org/D16019
The Linux compatibility code was converting the version number (e.g.
2.6.32) in two different ways and then comparing the results.
The linux_map_osrel() function converted MAJOR.MINOR.PATCH similar to
what FreeBSD does natively. I.e. where major=v0, minor=v1, and patch=v2
v = v0 * 1000000 + v1 * 1000 + v2;
The LINUX_KERNVER() macro, on the other hand, converted the value with
bit shifts. I.e. where major=a, minor=b, and patch=c
v = (((a) << 16) + ((b) << 8) + (c))
The Linux kernel uses the later format via the KERNEL_VERSION() macro in
include/generated/uapi/linux/version.h
Fix is to use the LINUX_KERNVER() macro in linux_map_osrel() as well as
in the .trans_osrel functions.
PR: 229209
Reviewed by: emaste, cem, imp (mentor)
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D15952
So that the ptrace code will catch it and report it to attached
debugger. Enables debugging of threaded Linux binaries with FreeBSD
debugger.
Submitted by: Yanko Yankulov <yanko.yankulov@gmail.com>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15880
Linux 2.6.26 introduced 64-bit capability sets. Extend our stub
implementation to handle both 32- and 64-bit. (We still report no
capabilities in capget, and disallow any in capset.)
Reviewed by: chuck
Sponsored by: Turing Robotic Industries Inc.
Differential Revision: https://reviews.freebsd.org/D15887
Existing linuxulator platforms (i386, amd64) support legacy syscalls,
such as non-*at ones like open, but arm64 and other new platforms do
not.
Wrap these in #ifdef LINUX_LEGACY_SYSCALLS, #defined in the MD linux.h
files. We may need finer grained control in the future but this is
sufficient for now.
Reviewed by: andrew
Sponsored by: Turing Robotic Industries
Differential Revision: https://reviews.freebsd.org/D15237
The Linuxulator provides per-syscall debug control via the
compat.linux.debug sysctl. There's generally a 1:1 mapping between
sysctl setting and syscall, but faccessat was controlled by the access
setting, perhaps due to copy-paste.
Sponsored by: Turing Robotic Industries
The break() system call was renamed (several times) starting in v3
AT&T UNIX when C was invented and break was a language keyword. The
last vestage of a need for it to be called something else (eg obreak)
was removed in r225617 which consistantly prefixed all syscall
implementations.
Reviewed by: emaste, kib (older version)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15638
the old encodings for the lower 16 and 32 bits and only using the
higher 32 bits for unusually large major and minor numbers. This
change breaks compatibility with the previous encoding (which was only
used in -current).
Fix truncation to (essentially) 16-bit dev_t in newnfs v3.
Any encoding of device numbers gives an ABI, so it can't be changed
without translations for compatibility. Extra bits give the much
larger complication that the translations need to compress into fewer
bits. Fortunately, more than 32 bits are rarely needed, so
compression is rarely needed except for 16-bit linux dev_t where it
was always needed but never done.
The previous encoding moved the major number into the top 32 bits.
Almost no translation code handled this, so the major number was blindly
truncated away in most 32-bit encodings. E.g., for ffs, mknod(8) with
major = 1 and minor = 2 gave dev_t = 0x10000002; ffs cannot represent
this and blindly truncated it to 2. But if this mknod was run on any
released version of FreeBSD, it gives dev_t = 0x102. ffs can represent
this, but in the previous encoding it was not decoded, giving major = 0,
minor = 0x102.
The presence of bugs was most obvious for exporting dev_t's from an
old system to -current, since bugs in newnfs augment them. I fixed
oldnfs to support 32-bit dev_t in 1996 (r16634), but this regressed
to 16-bit dev_t in newnfs, first to the old 16-bit encoding and then
further in -current. E.g., old ad0 with major = 234, minor = 0x10002
had the correct (major, minor) number on the wire, but newnfs truncated
this to (234, 2) and then the previous encoding shifted the major
number into oblivion as seen by ffs or old applications.
I first tried to fix this by translating on every ABI/API boundary, but
there are too many boundaries and too many sloppy translations by blind
truncation. So use the old encoding for the low 32 bits so that sloppy
translations work no worse than before provided the high 32 bits are
not set. Add some error checking for when bits are lost. Keep not
doing any error checking for translations for almost everything in
compat/linux.
compat/freebsd32/freebsd32_misc.c:
Optionally check for losing bits after possibly-truncating assignments as
before.
compat/linux/linux_stats.c:
Depend on the representation being compatible with Linux's (or just with
itself for local use) and spell some of the translations as assignments in
a macro that hides the details.
fs/nfsclient/nfs_clcomsubs.c:
Essentially the same fix as in 1996, except there is now no possible
truncation in makedev() itself. Also fix nearby style bugs.
kern/vfs_syscalls.c:
As for freebsd32. Also update the sysctl description to include file
numbers, and change it to describe device ids as device numbers.
sys/types.h:
Use inline functions (wrapped by macros) since the expressions are now
a bit too complicated for plain macros. Describe the encoding and
some of the reasons for it. 16-bit compatibility didn't leave many
reasonable choices for the 32-bit encoding, and 32-bit compatibility
doesn't leave many reasonable choices for the 64-bit encoding. My
choice is to put the 8 new minor bits in the low 8 bits of the top 32
bits. This minimizes discontiguities.
Reviewed by: kib (except for rewrite of the comment in linux_stats.c)
of 64-bit dev_t's (but not ones involving dev_t's).
st_size was supposed to be clamped in cvtstat() and linux's copy_stat(),
but the clamping code wasn't aware that st_size is signed, and also had
an obfuscated off-by-1 value for the unsigned limit, so its effect was
to produce a bizarre negative size instead of clamping.
Change freebsd32's copy_ostat() to be no worse than cvtstat(). It was
missing clamping and bzero()ing of padding.
Reviewed by: kib (except a final fix of the clamp to the signed maximum)
- Add macros to allow preinitialization of cap_rights_t.
- Convert most commonly used code paths to use preinitialized cap_rights_t.
A 3.6% speedup in fstat was measured with this change.
Reported by: mjg
Reviewed by: oshogbo
Approved by: sbruno
MFC after: 1 month
Use proper method to access userspace. For now, only the slow copyout
path is implemented.
Reported and tested by: tijl (previous version)
Sponsored by: The FreeBSD Foundation
Previously linuxulator had three identical copies of
linux_exec_imgact_try. Deduplicate before adding another arch to
linuxulator.
Sponsored by: Turing Robotic Industries Inc
Differential Revision: https://reviews.freebsd.org/D14856
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
strlcpy is used to copy a string into a buffer to be copied to userland,
previously leaving uninitialized data after the terminating NUL. Zero
the buffer first to avoid a kernel memory disclosure.
admbugs: 765, 811
MFC after: 1 day
Reported by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reported by: Vlad Tsyrklevich
Sponsored by: The FreeBSD Foundation
Many licenses on Linuxolator files contained small variations from the
standard FreeBSD license text. To avoid license proliferation switch to
the standard 2-Clause FreeBSD license for those files where I have
permission from each of the listed copyright holders.
Approved by: rdivacky, marcel
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Three copies of the linuxulator linux_sysvec.c contained identical
BSD to Linux errno translation tables, and future work to support other
architectures will also use the same table. Move the table to a common
file to be used by all. Make it 'const int' to place it in .rodata.
(Some existing Linux architectures use MD errno values, but x86 and Arm
share the generic set.)
This change should introduce no functional change; a followup will add
missing errno values.
MFC after: 3 weeks
Sponsored by: Turing Robotic Industries Inc.
Differential Revision: https://reviews.freebsd.org/D14665
Many licenses on Linuxolator files contained small variations from the
standard FreeBSD license text. To avoid license proliferation switch to
the standard 2-clause FreeBSD license for those files where I have
permission from each of the listed copyright holders. Additional files
still waiting on permission from others are listed in review D14210.
Approved by: dchagin, rdivacky, sos
MFC after: 1 week
MFC with: r329370
Sponsored by: The FreeBSD Foundation
binary mode user-space emulation layer. This is a regression issue after
r328436, when LinuxKPI character devices started to use DTYPE_DEV in
the "f_type" field of the associated file structure(s).
MFC after: 3 days
Found by: Johannes Lundberg <johalun0@gmail.com>
Sponsored by: Mellanox Technologies
Many licenses on Linuxolator files contained small variations from the
standard FreeBSD license text. To avoid license proliferation switch to
the standard 2-clause FreeBSD license for those files where I have
permission from each of the listed copyright holders. Additional files
waiting on permission from others are listed in review D14210.
Approved by: kan, marcel, sos, rdivacky
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
significant source of cache line contention from vm_page_alloc(). Use
accessors and vm_page_unwire_noq() so that the mechanism can be easily
changed in the future.
Reviewed by: markj
Discussed with: kib, glebius
Tested by: pho (earlier version)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14273
A version of each of the MD files by necessity exists for each CPU
architecture supported by the Linuxolator. Clean these up so that new
architectures do not inherit whitespace issues.
Clean up shared Linuxolator files while here.
Sponsored by: Turing Robotic Industries Inc.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Upon successful completion, the execve() system call invokes
exec_setregs() to initialize the registers of the initial thread of the
newly executed process. What is weird is that when execve() returns, it
still goes through the normal system call return path, clobbering the
registers with the system call's return value (td->td_retval).
Though this doesn't seem to be problematic for x86 most of the times (as
the value of eax/rax doesn't matter upon startup), this can be pretty
frustrating for architectures where function argument and return
registers overlap (e.g., ARM). On these systems, exec_setregs() also
needs to initialize td_retval.
Even worse are architectures where cpu_set_syscall_retval() sets
registers to values not derived from td_retval. On these architectures,
there is no way cpu_set_syscall_retval() can set registers to the way it
wants them to be upon the start of execution.
To get rid of this madness, let sys_execve() return EJUSTRETURN. This
will cause cpu_set_syscall_retval() to leave registers intact. This
makes process execution easier to understand. It also eliminates the
difference between execution of the initial process and successive ones.
The initial call to sys_execve() is not performed through a system call
context.
Reviewed by: kib, jhibbits
Differential Revision: https://reviews.freebsd.org/D13180
Expose more information about PCI devices (and GPUs in particular) via
linsysfs to libdrm.
This allows unmodified modern 64-bit Linux libdrm to work, which allows
modern Linux Mesa to work. The submitter reports that he tested the change
with an Ubuntu 16.04 chroot + amdgpu from graphics/drm-next-kmod.
PR: 222375
Submitted by: Greg V <greg AT unrelenting.technology>
were copied to the buffer supplied by the user.
Also fix getrandom() if Linuxulator modules are built without the kernel.
PR: 219464
Submitted by: Maciej Pasternacki
Reported by: Maciej Pasternacki
MFC after: 1 week
