Commit Graph

63 Commits

Author SHA1 Message Date
Andriy Gapon
00c06804a8 add rk3328 overlay for enabling analog sound
MFC after:	1 week
2021-11-13 11:09:23 +02:00
Adrian Chadd
9264bd386c ipq4018: add a device tree file for the ASUS rt-ac58u router
This is the initial device tree file describing the ASUS
RT-AC58U 2GHz/5GHz 11ac router.

Obtained from: OpenWRT
2021-10-18 19:18:46 +00:00
Adrian Chadd
8e53cd7099 ipq4018: add TCSR definitions from Linux.
These are hardware configuration options which are required in
the linux/openwrt device trees for the IPQ4018/IPQ4019 devices.

Since this isn't obtained from linux upstream but instead from
openwrt, this can't go in contrib; instead it is going in
sys/dts/include/ .

Obtained from: OpenWRT

Tested:

* IPQ4019 ASUS RT-AC58U AP, initial bootstrapping
2021-10-18 19:18:01 +00:00
Ed Maste
9feff969a0 Remove "All Rights Reserved" from FreeBSD Foundation sys/ copyrights
These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).

Sponsored by:	The FreeBSD Foundation
2021-08-08 10:42:24 -04:00
Emmanuel Vadot
40cb9b4357 arm64: allwinner: dtbo: Add dtb overlays to disable mmc node
This is useful for development.
Sponsored by:	Diablotin Systems
2021-07-24 22:53:33 +02:00
Emmanuel Vadot
735041a613 arm64: allwinner: Remove sun50i-a64-opp
This is unneeded now that the DTS have the opp.
MFC after:	1 week
Sponsored by:	Diablotin Systems
2021-07-24 17:59:35 +02:00
Emmanuel Vadot
2ca21223c5 dts: Bump the freebsd branding version to 5.13
Sponsored by:	Diablotin Systems
2021-07-01 18:48:56 +02:00
Emmanuel Vadot
bc805293d8 arm: allwinner: dtb: Add overlays to disable SD/MMC node
Useful for dev

Sponsored by:	Diablotin Systems
2021-06-14 20:47:37 +02:00
Emmanuel Vadot
eb09408085 arm64: rockchip: Add some DTSO to disable sd/mmc
This helps during developement to reduce the number of mmc controller.
2021-05-13 18:15:31 +02:00
Emmanuel Vadot
1240fba44d dts: Bump the freebsd branding version to 5.10 2021-03-23 15:02:21 +01:00
Andrew Turner
042ef1f115 Remove DTS files for arm boards we don't support
These are all FreeBS-specific device tree files. We don't support any
of these anymore, remove them.

Reviewed by:	emaste, manu
Sponsored by:	Innovate UK
Differential Revision:	https://reviews.freebsd.org/D28365
2021-01-27 10:02:01 +00:00
Emmanuel Vadot
efdf807990 Switch to the new device-tree vendor tree
The old vendor tree was never fully merged and doing partial merge isn't
supported with git subtree merge so a new one was created.
Switch the build to use the new DTS from sys/contrib/device-tree
This also bump the DTS used to be in sync with Linux 5.9
While here change the way to get the linux version, simply hardcode
the value in sys/dts/freebsd-compatible.dts and use awk to get that
to put it in the CFLAGS.
As a bonus we now have the bindings docs available
in sys/contrib/device-tree/Bindings/ so no need to link to the Linux repo
or to the vendor tree.
2021-01-15 20:08:39 +01:00
Thomas Skibo
facdd1cd20 cgem: add 64-bit support
Add 64-bit address support to Cadence CGEM Ethernet driver for use in
other SoCs such as the Zynq UltraScale+ and SiFive HighFive Unleashed.

Reviewed by:	philip, 0mp (manpages)
Differential Revision: https://reviews.freebsd.org/D24304
2021-01-10 16:51:52 -04:00
Emmanuel Vadot
4a63c1c1ed Brand our DTS with the Linux version it was imported from
DTS must be synced with the kernel, add a freebsd,dts-version string in
the root node of each DTS that we compile so we can later in the kernel
check that it contain a correct value.

Reviewed by:	imp, mmel
Differential Revision:	https://reviews.freebsd.org/D26724
2020-10-10 07:18:51 +00:00
Oleksandr Tymoshenko
c847212986 Remove licenses
I haven't requested explicit permission from authors and shouldn't have
added BSDL headers without it.

Requestes by:	imp
2020-06-04 17:20:58 +00:00
Oleksandr Tymoshenko
3a3bc1b1fd Add copyright headers to spigen overlays for rpi3 and rpi4
Reported by:	Rodney W. Grimes <freebsd@gndrsh.dnsmgr.net> (for rpi4)
2020-06-04 02:36:41 +00:00
Oleksandr Tymoshenko
eb5e1004e2 Add spigen overlay for Raspberry Pi 4
Submitted by:	gergely.czuczy@harmless.hu
2020-06-03 22:18:15 +00:00
Emmanuel Vadot
d6b4447496 allwinner: aw_thermal: Cope with DTS changes
The upstream DTS now include the thermal device node and the SID
calibration entry.
Update our driver to cope with this change and remove the DTB
overlays that aren't needed anymore.

MFC after:	2 months
X-MFC-With:	r359934
2020-04-14 19:05:17 +00:00
Emmanuel Vadot
3f9309e571 arm: zynq: An SPI driver for Zynq platforms
Submitted by:	Thomas Skibo
Differential Revision:	https://reviews.freebsd.org/D23319
2020-02-28 10:57:23 +00:00
Ganbold Tsagaankhuu
9eea475074 Add an overlay for RK3328 USB3 node.
It doesn't exist in mainline dts due to the issues related
with detaching and reattaching USB3 devices as mentioned in
https://patchwork.kernel.org/patch/10853381/
In case of FreeBSD, as a temporary workaround "usbconfig reset"
command can fix the problem.

Reviewed by:	manu
2020-01-29 12:10:42 +00:00
Emmanuel Vadot
2de9b4d347 zilinx/zy7_qspi: Add a qspi driver for Zynq platforms.
This is a qspi driver for the Xilinx Zynq-7000 chip.
It could be useful for anyone wanting to boot a system from flash memory
instead of SD cards.

Submitted by:	Thomas Skibo (thomasskibo@yahoo.com)
Differential Revision:	https://reviews.freebsd.org/D14698
2020-01-19 20:04:44 +00:00
Emmanuel Vadot
c9f3a1ac17 arm64: allwinner: dtso: Add spi0 spigen DTSO
This overlays can be used on A64 board to use spigen and spi(8)
on the spi0 pins.

Tested On:  Pine64-LTS, A64-Olinuxino

Submitted by:	Gary Otten <gdotten@gmail.com>
2020-01-11 18:36:10 +00:00
Ganbold Tsagaankhuu
a3965ba248 dtso: allwinner: Add an overlay for H3 thermal node
Reviewed by:	manu
2019-08-24 13:26:34 +00:00
Emmanuel Vadot
ad6521c24f dtso: allwinner: Add an overlay for H3 i2c0
Most of the H3 boards don't enable i2c as it is unused.
Add an overlay so it's easier for user to use i2c device.
2019-07-20 17:42:46 +00:00
Emmanuel Vadot
5b1309542e arm64: Add support for NanoPI NEO2
Add overlay files and activate devicetree file for NanoPi NEO2 featuring
Allwinner H5 ARM64 core.
To enable sound, dma and codec drivers are enabled for build.

Submitted by:	Manuel Stühn (freebsdnewbie@freenet.de)
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D20129
2019-05-02 12:56:13 +00:00
Emmanuel Vadot
9dfa2a5468 arm: dts: Remove some old DTS
RPI is using the firmware provided DTS since 12.0
Pandaboard works with the Linux DTS
RK* Exynos* and Meson*/Odroid* don't even work with current
source code, if someone wants to make them work again they
better use the Linux DTS.
2019-04-10 19:18:05 +00:00
Michal Meloun
64d41eddd7 Adapt FreeBSD specific DT stub for Jetson TK1 board to be consistent with
update of devicetree to 4.19 in r340337.
Our build system doesn't provide dependencies for included DTS files, so
nobody noticed this issue for long time.

PR:		235362
MFC after:	1 week
2019-02-06 06:03:44 +00:00
Oleksandr Tymoshenko
00a4815fc6 [rpi] Reorganize spigen(4) overlays for Raspberry Pi
- Remove CS=2 entry from spigen-rpi2 since it didn't work
- Add spigen-rpi3 overlay for Raspberry Pi 3
- Enable rpi overlay modules for GENERIC kernel on aarch64

PR:		233489
Submitted by:	bobf@mrp3.com
Reviewed by:	db
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D16088
2019-01-16 01:08:34 +00:00
Emmanuel Vadot
41dd88513b arm64: allwinner: Fix pwm dtso
Double patched files ended up in the tree

Reported by:	kevans
2018-12-12 21:10:34 +00:00
Emmanuel Vadot
c3c78b0aeb arm64: allwinner: Add DTSO for pwm and r_pwm
Those are both dtso (overlays) for the two pwm controllers found on the A64.
2018-12-12 21:02:22 +00:00
Emmanuel Vadot
fc6ebb297b arm64: allwinner: Add 792Mhz frequency to sun50i-a64-opp
This is the frequency of the cpu on the Pinebook so add it to make
cpufreq find the current setting.
Note that this dtbo on the Pinebook doesn't work right now as u-boot
dtb doesn't have symbols and so it fails to apply. Linux 4.20 have
the dts and will be imported once taggued.

MFC after:	1 month
X-MFC with:	r341268
2018-11-30 10:31:30 +00:00
Emmanuel Vadot
a69c1d42cc arm64: allwinner: Add a dtbo to have cpu operating points
This enables cpufreq on A64 boards.

MFC after:	1 month
2018-11-29 22:35:23 +00:00
Kyle Evans
851f1a1121 Fix test-dts{,o} targets
There were two main problems here:

1.) sys/dts/Makefile.inc is not included from various */overlays directories
    by default, only ../Makefile.inc
2.) When shelling out for DTS/DTSO, cwd != .CURDIR, so enumeration always
    failed

These changes allow make test-dts and make test-dtso to function in their
respective directories.

Reviewed by:	manu
MFC after:	3 days
Differential Revision:	https://reviews.freebsd.org/D17961
2018-11-12 22:18:11 +00:00
Ruslan Bukin
3c8efd61f5 Revert r339421 due to unintended files included to commit.
Reported by:	ian
Approved by:	re (gjb)
Sponsored by:	DARPA, AFRL
2018-10-18 15:17:58 +00:00
Ruslan Bukin
53c6ad1d62 Support RISC-V implementations that do not manage the A and D bits
(e.g. RocketChip, lowRISC and derivatives).

RISC-V page table entries support A (accessed) and D (dirty) bits. The
spec makes hardware support for these bits optional. Implementations that
do not manage these bits in hardware raise page faults for accesses to a
valid page without A set and writes to a writable page without D set.
Check for these types of faults when handling a page fault and fixup the
PTE without calling vm_fault if they occur.

Reviewed by:	jhb, markj
Approved by:	re (gjb)
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D17424
2018-10-18 15:08:14 +00:00
Emmanuel Vadot
a9e5047fa6 arm64: Add DTS overlays for A64
- sun50i-a64-sid.dtso registers the Security ID node, needed for thermal
 - sun50i-a64-ths.dtso registers the thermal node, for which we already have a
driver
 - sun50i-a64-timer.dtso registers the timer node, needed as the generic timer
 glitch on A64 SoC.

Approved by:    re (gjb)
2018-08-24 15:00:36 +00:00
Warner Losh
58d5c51106 Remove Atmel AT91RM9200 and AT91SAM9 support.
The last known robust version of this code base was FreeBSD 8.2. There
are no users of this on current, and all users of it have abandoned
this platform or are in legacy mode with a prior version of FreeBSD.

All known users on arm@ approved this removal, and there were no
objections.

Differential Revision: https://reviews.freebsd.org/D16312
2018-07-27 18:28:22 +00:00
Ian Lepore
95e390b666 Add spi-max-frequency properties to all spigen nodes. This is a required
property for spi devices, although in the spigen case it's expected that
the speed will be overridden at runtime via the ioctl interface.  A very
conservative 500khz speed is used (I've never seen a spi device that
couldn't run at 1mhz).
2018-06-23 22:55:22 +00:00
Ian Lepore
ce0b0df7ab Add spigen(4) fdt data overlays for RPI-B, RPI-2.
By adding spigen-rpi{2,-b}.dtso to fdt_overlays= in loader.conf, the fdt data
will set up the correct pinmux and device nodes to create a spigen(4) device
for each available chipselect pin.

Submitted by:	Bob Frazier
Differential Revision:	https://reviews.freebsd.org/D15067
2018-06-22 20:45:40 +00:00
Kyle Evans
6d5127daf4 arm: overlays: Update to new path-based sugar format 2018-05-04 14:38:48 +00:00
Kyle Evans
903da53796 Garbage collect the a83t emac overlays
The 4.16 DTS import brought in emac support for the a83t. Since these
boards' DTS is pulled from /boot and I forgot to hook these up to the build,
they should be fairly safe to go away.

The a83t-sid and h3-sid overlays are still relevant. a83t-sid will likely
come in with 4.18 DTS.
2018-05-03 19:49:40 +00:00
Marcin Wojtas
ded9da6832 Update mv_gpio driver to new FreeBSD API
This patch implements and exports functions described
in gpio_if.m file. It also uses new gpiobus_attach_bus function
instead of adding gpioc and gpiobus as children. It removes
ulgy reading SoC ID and related if..else, so it depends only on
data read from FDT.

Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14756
2018-04-26 19:00:48 +00:00
Ruslan Bukin
05439eb571 Enable ARM PL330 DMA engine and Cadence Quad SPI flash controller on
Intel Arria 10 SoC boards.

Tested on Intel Arria 10 SoC Development Kit.

Sponsored by:	DARPA, AFRL
2018-04-23 12:23:05 +00:00
Ruslan Bukin
b8f915ab24 Convert atse(4) driver for Altera Triple-Speed Ethernet MegaCore to use
xdma(4) interface.

This allows us to switch between Altera mSGDMA or SoftDMA engines used by
atse(4) device.

This also makes atse(4) driver become 25% smaller.

Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D9618
2018-04-13 15:59:24 +00:00
Ruslan Bukin
36f5f2fb30 Add beripic1, msgdma and softdma instances.
Sponsored by:	DARPA, AFRL
2018-04-13 15:18:06 +00:00
Marcin Wojtas
391f888277 Remove deprecated DT sources of Armada 38x SoCs
Now, as all platform code and drivers support Linux
DT binding, safely remove deprecated sources and rely
on sys/gnu/dts from now on.

Obtained from: Semihalf
Sponsored by: Stormshield
2018-04-10 13:25:42 +00:00
Oleksandr Tymoshenko
91cc58af37 [rpi] Add fdt_pinctrl(4) support to Raspberry Pi GPIO driver
On Raspberry Pi platform GPIO controller also responsible for pins
multiplexing. Pi code predates proper FDT support in FreeBSD so a
lot of pinmux info is hardcoded. This patch:

- Implements pinctl methods in bcm2835_gpio
- Converts all devices with ad-hoc pinmux info to proper pin control
  mechanisms and adds pinmux info in FreeBSD's custom dts files.
- Adds fdt_pinctrl option to RPI2 and RPI-B kernels
- Adds SPI pinmux config to FreeBSD's customization of GNU DTS.

Reviewed by:	imp, manu
Differential Revision:	https://reviews.freebsd.org/D14104
2018-04-08 00:56:19 +00:00
Kyle Evans
1e14d6eb3d Add a83t overlays for sid and emac
The sun8i-a83t-bananapi-m3-emac overlay technically doesn't match what will
be coming from upstream. The tx-delay and rx-delay should be specified in
terms of allwinner,tx-delay-ps and allwinner,rx-delay-ps respectively. The
values are still technically correct for what we write in if_awg, and
support for the new bindings will be coming soon.
2018-04-07 22:28:43 +00:00
Marcin Wojtas
46db728392 Match Marvell Armada38X PCIE ranges in dts with Linux
If driver cannot determine ranges based on fdt, it will calculate
them based on number and type of current port.

Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14752
2018-04-04 13:01:14 +00:00
Marcin Wojtas
13d464bf71 Change reg in Marvell Armada38X pcie FDT
Ranges in pcie-controller are unused, so could be changed to match Linux
device tree represntation. Same with interrupt-cells and interrupt-parent.
In PCI controller driver ocd_data are used for matching driver and
choose proper resources acquisition function.
fdt_win_process_child have new argument which provide information
about fdt node containing addresses of MMIO registers.

Submitted by: Rafal Kozik <rk@semihalf.com>
Reviewed by: manu [DT part]
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D14751
2018-04-04 12:54:18 +00:00