sbdrop_locked() to cut acked mbufs from the socket buffer. Free this
chain a batch manner after the socket buffer lock is dropped.
This measurably reduces contention on socket buffer.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Approved by: re (marius)
dynamic translation so that their arguments match the definitions for
these providers in Solaris and illumos. Thus, existing scripts for these
providers should work unmodified on FreeBSD.
Tested by: gnn, hiren
MFC after: 1 month
structure is used, but they already have equal fields in the struct
newipsecstat, that was introduced with FAST_IPSEC and then was merged
together with old ipsecstat structure.
This fixes kernel stack overflow on some architectures after migration
ipsecstat to PCPU counters.
Reported by: Taku YAMAMOTO, Maciej Milewski
increased the pointer, not the memory it points to.
In collaboration with: kib
Reported & tested by: Ian FREISLICH <ianf clue.co.za>
Sponsored by: Nginx, Inc.
limited in the amount of data they can handle at once.
Drivers can set ifp->if_hw_tsomax before calling ether_ifattach() to
change the limit.
The lowest allowable size is IP_MAXPACKET / 8 (8192 bytes) as anything
less wouldn't be very useful anymore. The upper limit is still at
IP_MAXPACKET (65536 bytes). Raising it requires further auditing of
the IPv4/v6 code path's as the length field in the IP header would
overflow leading to confusion in firewalls and others packet handler on
the real size of the packet.
The placement into "struct ifnet" is a bit hackish but the best place
that was found. When the stack/driver boundary is updated it should
be handled in a better way.
Submitted by: cperciva (earlier version)
Reviewed by: cperciva
Tested by: cperciva
MFC after: 1 week (using spare struct members to preserve ABI)
duplicate ACK make sure we actually have new data to send.
This prevents us from sending unneccessary pure ACKs.
Reported by: Matt Miller <matt@matthewjmiller.net>
Tested by: Matt Miller <matt@matthewjmiller.net>
MFC after: 2 weeks
connections in the accept queue and contiguous new incoming SYNs.
Compared to the original submitters patch I've moved the test
next to the SYN handling to have it together in a logical unit
and reworded the comment explaining the issue.
Submitted by: Matt Miller <matt@matthewjmiller.net>
Submitted by: Juan Mojica <jmojica@gmail.com>
Reviewed by: Matt Miller (changes)
Tested by: pho
MFC after: 1 week
Convert 'struct ipstat' and 'struct tcpstat' to counter(9).
This speeds up IP forwarding at extreme packet rates, and
makes accounting more precise.
Sponsored by: Nginx, Inc.
For TIMEWAIT handling tcp_input may have to jump back for an additional
pass through pcblookup. Prior to this change the fwd_tag had been
discarded after the first lookup, so a new connection attempt delivered
locally via 'ipfw fwd' would fail to find a match.
As of r248886 the tag will be detached and freed when passed to the
socket buffer.
logic (refer to [1] for associated discussion). snd_cwnd and snd_wnd are
unsigned long and on 64 bit hosts, min() will truncate them to 32 bits and could
therefore potentially corrupt the result (although under normal operation,
neither variable should legitmately exceed 32 bits).
[1] http://lists.freebsd.org/pipermail/freebsd-net/2013-January/034297.html
Submitted by: jhb
MFC after: 1 week
but later after processing and freeing the tag, we need to jump back again
to the findpcb label. Since the fwd_tag pointer wasn't NULL we tried to
process and free the tag for second time.
Reported & tested by: Pawel Tyll <ptyll nitronet.pl>
MFC after: 3 days
Instead, add protocol specific mbuf flags M_IP_NEXTHOP and
M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain
contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup
only when this flag is set.
Suggested by: andre
draft-ietf-tcpm-initcwnd-05. It explains why the increased initial
window improves the overall performance of many web services without
risking congestion collapse.
As long as it remains a draft it is placed under a sysctl marking it
as experimental:
net.inet.tcp.experimental.initcwnd10 = 1
When it becomes an official RFC soon the sysctl will be changed to
the RFC number and moved to net.inet.tcp.
This implementation differs from the RFC draft in that it is a bit
more conservative in the case of packet loss on SYN or SYN|ACK because
we haven't reduced the default RTO to 1 second yet. Also the restart
window isn't yet increased as allowed. Both will be adjusted with
upcoming changes.
Is is enabled by default. In Linux it is enabled since kernel 3.0.
MFC after: 2 weeks
especially in the presence of bi-directional data transfers.
snd_wl1 tracks the right edge, including data in the reassembly
queue, of valid incoming data. This makes it like rcv_nxt plus
reassembly. It never goes backwards to prevent older, possibly
reordered segments from updating the window.
snd_wl2 tracks the left edge of sent data. This makes it a duplicate
of snd_una. However joining them right now is difficult due to
separate update dependencies in different places in the code flow.
snd_wnd tracks the current advertized send window by the peer. In
tcp_output() the effective window is calculated by subtracting the
already in-flight data, snd_nxt less snd_una, from it.
ACK's become the main clock of window updates and will always update
the window when the left edge of what we sent is advanced. The ACK
clock is the primary signaling mechanism in ongoing data transfers.
This works reliably even in the presence of reordering, reassembly
and retransmitted segments. The ACK clock is most important because
it determines how much data we are allowed to inject into the network.
Zero window updates get us out of persistence mode are crucial. Here
a segment that neither moves ACK nor SEQ but enlarges WND is accepted.
When the ACK clock is not active (that is we're not or no longer
sending any data) any segment that moves the extended right SEQ edge,
including out-of-order segments, updates the window. This gives us
updates especially during ping-pong transfers where the peer isn't
done consuming the already acknowledged data from the receive buffer
while responding with data.
The SSH protocol is a prime candidate to benefit from the improved
bi-directional window update logic as it has its own windowing
mechanism on top of TCP and is frequently sending back protocol ACK's.
Tcpdump provided by: darrenr
Tested by: darrenr
MFC after: 2 weeks
We've got more cluster sizes for quite some time now and the orginally
imposed limits and the previously codified thoughts on efficiency gains
are no longer true.
MFC after: 2 weeks
reduce the initial CWND to one segment. This reduction got lost
some time ago due to a change in initialization ordering.
Additionally in tcp_timer_rexmt() avoid entering fast recovery when
we're still in TCPS_SYN_SENT state.
MFC after: 2 weeks
on the related functionality in the runtime via the sysctl variable
net.pfil.forward. It is turned off by default.
Sponsored by: Yandex LLC
Discussed with: net@
MFC after: 2 weeks
before passing a packet to protocol input routines.
For several protocols this mean that now protocol needs to
do subtraction itself, and for another half this means that
we do not need to add header length back to the packet.
Make ip_stripoptions() to adjust ip_len, since now we enter
this function with a packet header whose ip_len does represent
length of entire packet, not payload only.
in network byte order. Any host byte order processing is
done in local variables and host byte order values are
never[1] written to a packet.
After this change a packet processed by the stack isn't
modified at all[2] except for TTL.
After this change a network stack hacker doesn't need to
scratch his head trying to figure out what is the byte order
at the given place in the stack.
[1] One exception still remains. The raw sockets convert host
byte order before pass a packet to an application. Probably
this would remain for ages for compatibility.
[2] The ip_input() still subtructs header len from ip->ip_len,
but this is planned to be fixed soon.
Reviewed by: luigi, Maxim Dounin <mdounin mdounin.ru>
Tested by: ray, Olivier Cochard-Labbe <olivier cochard.me>
that can occur when both sides close at the same time.
If that occurs, without this fix the connection enters
FIN1 on both sides and they will forever send FIN|ACK at
each other until the connection times out. This is because
we stopped processing the FIN|ACK and thus did not advance
the sequence and so never ACK'd each others FIN. This
fix adjusts it so we *do* process the FIN properly and
the race goes away ;-)
MFC after: 1 month
- Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs.
These are available as t3_tom and t4_tom modules that augment cxgb(4)
and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as
usual with or without these extra features.
- iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the
works and will follow soon.
Build-tested with make universe.
30s overview
============
What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the
capabilities of an interface:
# ifconfig -m | grep TOE
Enable/disable TCP offload on an interface (just like any other ifnet
capability):
# ifconfig cxgbe0 toe
# ifconfig cxgbe0 -toe
Which connections are offloaded? Look for toe4 and/or toe6 in the
output of netstat and sockstat:
# netstat -np tcp | grep toe
# sockstat -46c | grep toe
Reviewed by: bz, gnn
Sponsored by: Chelsio communications.
MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
headers for TSO but also for generic checksum offloading. Ideally we
would only have one common function shared amongst all drivers, and
perhaps when updating them for IPv6 we should introduce that.
Eventually we should provide the meta information along with mbufs to
avoid (re-)parsing entirely.
To not break IPv6 (checksums and offload) and to be able to MFC the
changes without risking to hurt 3rd party drivers, duplicate the v4
framework, as other OSes have done as well.
Introduce interface capability flags for TX/RX checksum offload with
IPv6, to allow independent toggling (where possible). Add CSUM_*_IPV6
flags for UDP/TCP over IPv6, and reserve further for SCTP, and IPv6
fragmentation. Define CSUM_DELAY_DATA_IPV6 as we do for legacy IP and
add an alias for CSUM_DATA_VALID_IPV6.
This pretty much brings IPv6 handling in line with IPv4.
TSO is still handled in a different way and not via if_hwassist.
Update ifconfig to allow (un)setting of the new capability flags.
Update loopback to announce the new capabilities and if_hwassist flags.
Individual driver updates will have to follow, as will SCTP.
Reported by: gallatin, dim, ..
Reviewed by: gallatin (glanced at?)
MFC after: 3 days
X-MFC with: r235961,235959,235958
Add code to handle pre-checked TCP checksums as indicated by mbuf
flags to save the entire computation for validation if not needed.
In the IPv6 TCP output path only compute the pseudo-header checksum,
set the checksum offset in the mbuf field along the appropriate flag
as done in IPv4.
In tcp_respond() just initialize the IPv6 payload length to 0 as
ip6_output() will properly set it.
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
Reviewed by: gnn (as part of the whole)
MFC After: 3 days
Factor out the tcp_hc_getmtu() call. As the comments say it
applies to both v4 and v6, so only write it once making it easier
to read the protocol family specifc code.
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
Reviewed by: gnn (as part of the whole)
MFC After: 3 days
proposed MTU value from it and update the TCP host cache. Then
tcp_mss_update() is called on the corresponding tcpcb. It finds the
just allocated entry in the TCP host cache and updates MSS on the
tcpcb. And then we do a fast retransmit of what we have in the tcp
send buffer.
This sequence gets broken if the TCP host cache is exausted. In this
case allocation fails, and later called tcp_mss_update() finds nothing
in cache. The fast retransmit is done with not reduced MSS and is
immidiately replied by remote host with new ICMP datagrams and the
cycle repeats. This ping-pong can go up to wirespeed.
To fix this:
- tcp_mss_update() gets new parameter - mtuoffer, that is like
offer, but needs to have min_protoh subtracted.
- tcp_mtudisc() as notification method renamed to tcp_mtudisc_notify().
- tcp_mtudisc() now accepts not a useless error argument, but proposed
MTU value, that is passed to tcp_mss_update() as mtuoffer.
Reported by: az
Reported by: Andrey Zonov <andrey zonov.org>
Reviewed by: andre (previous version of patch)
hz >> 1000 and thus getting outside the timestamp clock frequenceny of
1ms < x < 1s per tick as mandated by RFC1323, leading to connection
resets on idle connections.
Always use a granularity of 1ms using getmicrouptime() making all but
relevant callouts independent of hz.
Use getmicrouptime(), not getmicrotime() as the latter may make a jump
possibly breaking TCP nfsroot mounts having our timestamps move forward
for more than 24.8 days in a second without having been idle for that
long.
PR: kern/61404
Reviewed by: jhb, mav, rrs
Discussed with: silby, lstewart
Sponsored by: Sandvine Incorporated (originally in 2011)
MFC after: 6 weeks
TCP_KEEPCNT, that allow to control initial timeout, idle time, idle
re-send interval and idle send count on a per-socket basis.
Reviewed by: andre, bz, lstewart
than or equal to rcv_adv and fix tcp_twstart() to handle this case by
assuming the last window was zero rather than a negative value.
The code in tcp_input() already safely handled this case. It can happen
due to delayed ACKs along with a remote sender that sends data beyond
the window we previously advertised. If we have room in our socket buffer
for the extra data beyond the advertised window, we will accept it.
However, if the ACK for that segment is delayed, then we will not
effectively fixup rcv_adv to account for that extra data until the
next segment arrives and forces out an ACK. When that next segment
arrives, rcv_nxt will be beyond rcv_adv.
Tested by: pjd
MFC after: 1 week
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
They seem to be changed unintentionally in r226437, and there were no
any mentions of renaming in commit log message.
Reported by: Anton Yuzhaninov <citrin citrin ru>
long been superseded by the RFC3390 initial CWND sizing.
Also remove the remnants of TCP_METRICS_CWND which used the
TCP hostcache to set the initial CWND in a non-RFC compliant
way.
MFC after: 1 week
inpcb object.
Skip the TCP_SIGNATURE check in that case as it is consistent with the
output path (no TCP_SIGNATURE for outcoming packets in TIMEWAIT state)
and also because for TIMEWAIT state the verify may be less effective.
Sponsored by: Sandvine Incorporated
Reported by: rwatson
No objections by: rwatson
MFC after: 3 days
and the maximum TCP send and receive buffer limits from 256kB
to 2MB.
For sb_max_adj we need to add the cast as already used in the sysctl
handler to not overflow the type doing the maths.
Note that this is just the defaults. They will allow more memory
to be consumed per socket/connection if needed but not change the
default "idle" memory consumption. All values are still tunable
by sysctls.
Suggested by: gnn
Discussed on: arch (Mar and Aug 2011)
MFC after: 3 weeks
Approved by: re (kib)
Distinguish IPv4 and IPv6 addresses and optional port numbers in
user space to set the option for the correct protocol family.
Add support in the kernel for carrying the new IPv6 destination
address and port.
Add support to TCP and UDP for IPv6 and fix UDP IPv4 to not change
the address in the IP header.
Add support for IPv6 forwarding to a non-local destination.
Add a regession test uitilizing VIMAGE to check all 20 possible
combinations I could think of.
Obtained from: David Dolson at Sandvine Incorporated
(original version for ipfw fwd IPv6 support)
Sponsored by: Sandvine Incorporated
PR: bin/117214
MFC after: 4 weeks
Approved by: re (kib)
