R_Zalloc is essentially a malloc(M_NOWAIT) wrapper. It is possible that 'rnh'
failed to allocate, but 'rmh' succeeds. In that case, we bail out of
rn_inithead() but previously did not free 'rmh'.
Introduced in r287073 (projects/routing) / MFP r294706.
Reported by: Coverity
CID: 1350258
Sponsored by: EMC / Isilon Storage Division
There are number of radix consumers in kernel land (pf,ipfw,nfs,route)
with different requirements. In fact, first 3 don't have _any_ requirements
and first 2 does not use radix locking. On the other hand, routing
structure do have these requirements (rnh_gen, multipath, custom
to-be-added control plane functions, different locking).
Additionally, radix should not known anything about its consumers internals.
So, radix code now uses tiny 'struct radix_head' structure along with
internal 'struct radix_mask_head' instead of 'struct radix_node_head'.
Existing consumers still uses the same 'struct radix_node_head' with
slight modifications: they need to pass pointer to (embedded)
'struct radix_head' to all radix callbacks.
Routing code now uses new 'struct rib_head' with different locking macro:
RADIX_NODE_HEAD prefix was renamed to RIB_ (which stands for routing
information base).
New net/route_var.h header was added to hold routing subsystem internal
data. 'struct rib_head' was placed there. 'struct rtentry' will also
be moved there soon.
R_Free(). This matches the other macros and reduces the chances to clash
with other headers.
This also fixes the build of radix.c outside of the kernel environment.
Reviewed by: glebius
This is temporary commit to be merged to 10.
Other approach (like hash table) should be used
to store different masks.
PR: 194078
Submitted by: Rumen Telbizov
MFC after: 3 days
it performs exact match search, regardless of netmask existance.
This simplifies most of rnh_lookup() consumers.
Fix panic triggered by deleting non-existent host route.
PR: kern/185092
Submitted by: Nikolay Denev <ndenev at gmail.com>
MFC after: 1 month
Usual symptoms are messages like
rn_delete: inconsistent annotation
rn_addmask: mask impossibly already in tree
or inability to flush/delete particular prefix in ipfw table.
Changes:
* Assume 32 bytes as maximum radix key length
* Remove rn_init()
* Statically allocate rn_ones/rn_zeroes
* Make separate mask tree for each "normal" tree instead of system global one
* Remove "optimization" on masks reusage and key zeroying
* Change rn_addmask() arguments to accept tree pointer (no users in base)
PR: kern/182851, kern/169206, kern/135476, kern/134531
Found by: Slawa Olhovchenkov <slw@zxy.spb.ru>
MFC after: 2 weeks
Reviewed by: glebius
Sponsored by: Yandex LLC
allow for connection load balancing across interfaces. Currently
the address alias handling method is colliding with the ECMP code.
For example, when two interfaces are configured on the same prefix,
only one prefix route is installed. So connection load balancing
among the available interfaces is not possible.
The other advantage of ECMP is for failover. The issue with the
current code, is that the interface link-state is not reflected
in the route entry. For example, if there are two interfaces on
the same prefix, the cable on one interface is unplugged, new and
existing connections should switch over to the other interface.
This is not done today and packets go into a black hole.
Also, there is a small bug in the kernel where deleting ECMP routes
in the userland will always return an error even though the command
is successfully executed.
MFC after: 5 days
radix table root nodes. This is only needed (and available)
in the virtualization case to free the resources when tearing
down a virtual network stack.
Sponsored by: ISPsystem
Reviewed by: julian, zec
MFC after: 5 days
this requires a small reordering of headers and a few #defines to
map functions not available in userland.
Remove a useless #ifndef block at the beginning of the file.
Introduce (temporarily) rn_init2(), see the comment in the code
for the proper long term change.
No ABI or functional change.
MFC after: 7 days
- cast the result of LEN() to int as this is the main usage.
- use LEN() in one place where it was forgotten.
- Document the use of a static variable in rw mode.
More small changes to follow.
MFC after: 7 days
(ECMP) for both IPv4 and IPv6. Previously, multipath route insertion
is disallowed. For example,
route add -net 192.103.54.0/24 10.9.44.1
route add -net 192.103.54.0/24 10.9.44.2
The second route insertion will trigger an error message of
"add net 192.103.54.0/24: gateway 10.2.5.2: route already in table"
Multiple default routes can also be inserted. Here is the netstat
output:
default 10.2.5.1 UGS 0 3074 bge0 =>
default 10.2.5.2 UGS 0 0 bge0
When multipath routes exist, the "route delete" command requires
a specific gateway to be specified or else an error message would
be displayed. For example,
route delete default
would fail and trigger the following error message:
"route: writing to routing socket: No such process"
"delete net default: not in table"
On the other hand,
route delete default 10.2.5.2
would be successful: "delete net default: gateway 10.2.5.2"
One does not have to specify a gateway if there is only a single
route for a particular destination.
I need to perform more testings on address aliases and multiple
interfaces that have the same IP prefixes. This patch as it
stands today is not yet ready for prime time. Therefore, the ECMP
code fragments are fully guarded by the RADIX_MPATH macro.
Include the "options RADIX_MPATH" in the kernel configuration
to enable this feature.
Reviewed by: robert, sam, gnn, julian, kmacy
did not stop at the right node. Change the backtracking check from
smaller-than to smaller-or-equal to prevent this from happening.
While here fix one additional problem where the insertion of the
default route traversed the entire tree.
PR: kern/38752
Submitted by: qingli (before I became committer)
Reviewed by: andre
MFC after: 3 days
Clearly comment the assumptions on the structure of keys (addresses)
and masks, and introduce a macro, LEN(p), to extract the size of these
objects instead of using *(u_char *)p which might be confusing.
Comment the confusion in the types used to pass around pointers
to keys and masks, as a reminder to fix that at some point.
Add a few comments on what some functions do.
Comment a probably inefficient (but still correct) section of code
in rn_walktree_from()
The object code generated after this commit is the same as before.
At some point we should also change same variable identifiers such
as "t, tt, ttt" to fancier names such as "root, left, right" (just
in case someone wants to understand the code!), replace misspelling
of NULL as 0, remove 'register' declarations that make little sense
these days.
+ remove useless wrappers around bcmp(), bcopy(), bzero().
The code assumes that bcmp() returns 0 if the size is 0, but
this is true for both the libc and the libkern versions.
+ nuke Bcmp, Bzero, Bcopy from radix.h now that nobody uses them anymore.
the mbuf allocator flags {M_TRYWAIT, M_DONTWAIT}.
o Fix a bpf_compat issue where malloc() was defined to just call
bpf_alloc() and pass the 'canwait' flag(s) along. It's been changed
to call bpf_alloc() but pass the corresponding M_TRYWAIT or M_DONTWAIT
flag (and only one of those two).
Submitted by: Hiten Pandya <hiten@unixdaemons.com> (hiten->commit_count++)
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses. Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
seems to be that the nodes are bzero'd beforehand, but the submitter
found that this was not always the case, and in any event defensive
programming here costs epsilon squared.
PR: 22244
Submitted by: Dave Gillam <daveg@chiaro.com>
search routine, and scratching our heads over why it was so obfuscated.
This delta fixes a number of confusing style bugs and renames several
structure members to have more meaningful names. There remain a number
of odd control-flow structures. These changes do not affect the generated
code.
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.
This caused a panic in rtfreee() called with a root node from the
routing socket code (when processing a RTM_GET message looking for
the default route while there is none).
Since no existing code seems to have any use getting the root node
from rn_match(), it seems cleaner never to return it rather than
check for this condition at the caller's.
PR: kern/12265
able to expand the zeros, ones etc masks on the fly. It seems a good
number of domains don't set the rn_maxkey variable anyway, and because
this is a domain itself, there is no guarantee we've been called after
a protocol that actually has set it (ie: inet), so start with a maxkey
of a relatively sane size as a base point until it can adapt on the fly.
