write fault or while wiring a mapping that must support write access.
In general, this change should reduce the number of traps that occur for
the purpose of setting the modified bit. More specifically, this change
should prevent traps while holding locks in a sysctl handler. See
kern/kern_sysctl.c revisions 1.168 and 1.195 (svn r192160) for further
details.
Tested by: gonzo
possible future I-cache coherency operation can succeed. On ARM
for example the L1 cache can be (is) virtually mapped, which
means that any I/O that uses temporary mappings will not see the
I-cache made coherent. On ia64 a similar behaviour has been
observed. By flushing the D-cache, execution of binaries backed
by md(4) and/or NFS work reliably.
For Book-E (powerpc), execution over NFS exhibits SIGILL once in
a while as well, though cpu_flush_dcache() hasn't been implemented
yet.
Doing an explicit D-cache flush as part of the non-DMA based I/O
read operation eliminates the need to do it as part of the
I-cache coherency operation itself and as such avoids pessimizing
the DMA-based I/O read operations for which D-cache are already
flushed/invalidated. It also allows future optimizations whereby
the bcopy() followed by the D-cache flush can be integrated in a
single operation, which could be implemented using on-chips DMA
engines, by-passing the D-cache altogether.
Reimplement "kernel_pmap" in the standard way.
Eliminate unused variables. (These are mostly variables that were
discarded by the machine-independent layer after FreeBSD 4.x.)
Properly handle a vm_page_alloc() failure in pmap_init().
Eliminate dead or legacy (FreeBSD 4.x) code.
Eliminate unnecessary page queues locking.
Eliminate some excess white space.
Correct the synchronization of pmap_page_exists_quick().
Tested by: gonzo
a fair number of static data structures, making this an unlikely
option to try to change without also changing source code. [1]
Change default cache line size on ia64, sparc64, and sun4v to 128
bytes, as this was what rtld-elf was already using on those
platforms. [2]
Suggested by: bde [1], jhb [2]
MFC after: 2 weeks
Introduce pmap_try_insert_pv_entry(), a function that conditionally
creates a pv entry if the number of entries is below the high water mark
for pv entries.
Introduce pmap_enter_quick_locked() and use it to reimplement
pmap_enter_object(). The old implementation was broken. For example,
it could block while holding a mutex lock.
Change pmap_enter_quick_locked() to fail rather than wait if it is
unable to allocate a page table page. This prevents a race between
pmap_enter_object() and the page daemon. Specifically, an inactive
page that is a successor to the page that was given to
pmap_enter_quick_locked() might become a cache page while
pmap_enter_quick_locked() waits and later pmap_enter_object() maps
the cache page violating the invariant that cache pages are never
mapped. Similarly, change
pmap_enter_quick_locked() to call pmap_try_insert_pv_entry() rather
than pmap_insert_entry(). Generally speaking,
pmap_enter_quick_locked() is used to create speculative mappings. So,
it should not try hard to allocate memory if free memory is scarce.
Tested by: gonzo
CACHE_LINE_SIZE constant. These constants are intended to
over-estimate the cache line size, and be used at compile-time
when a run-time tuning alternative isn't appropriate or
available.
Defaults for all architectures are 64 bytes, except powerpc
where it is 128 bytes (used on G5 systems).
MFC after: 2 weeks
Discussed on: arch@
1) Move the new field (brand_note) to the end of the Brandinfo structure.
2) Add a new flag BI_BRAND_NOTE that indicates that the brand_note pointer
is valid.
3) Use the brand_note field if the flag BI_BRAND_NOTE is set and as old
modules won't have the flag set, so the new field brand_note would be
ignored.
Suggested by: jhb
Reviewed by: jhb
Approved by: kib (mentor)
MFC after: 6 days
to the full path of the image that is being executed.
Increase AT_COUNT.
Remove no longer true comment about types used in Linux ELF binaries,
listed types contain FreeBSD-specific entries.
Reviewed by: kan
".note.ABI-tag" section.
The search order of a brand is changed, now first of all the
".note.ABI-tag" is looked through.
Move code which fetch osreldate for ELF binary to check_note() handler.
PR: 118473
Approved by: kib (mentor)
kernel. Rather than just kick off the page daemon, we actively retire
more mappings. The inner loop now looks a lot like the inner loop of
pmap_remove_all.
Also, get_pv_entry can't return NULL now, so remove panic if it did.
Reviewed by: alc@
- Add debug output
- Fix pmap_zero_page and related places: use uncached segments and invalidate
cache after zeroing memory.
- Do not test for modified bit if it's not neccessary
(merged from mips-juniper p4 branch)
- Some #includes reorganization
o Add support for compiling elf64 for this file (the rest of the changes are
coming later)
o Fill in some misssing relocation types. We need to support these in
elf_machdep.c's relocation routines eventually, but that's future work
too.
module; the ath module now brings in the hal support. Kernel
config files are almost backwards compatible; supplying
device ath_hal
gives you the same chip support that the binary hal did but you
must also include
options AH_SUPPORT_AR5416
to enable the extended format descriptors used by 11n parts.
It is now possible to control the chip support included in a
build by specifying exactly which chips are to be supported
in the config file; consult ath_hal(4) for information.
of the ABI of the currently executing image. Change some places to test
the flags instead of explicit comparing with address of known sysentvec
structures to determine ABI features.
Discussed with: dchagin, imp, jhb, peter
whatever template was used to create this driver. It is not
necessary, and wouldn't work anyway since (a) this device will never
be in a cardbus tin-can and (b) the driver isn't even PCI, but instead
a built-in NIC on the IDT RC32434 on its internal bus.
machine arm
device mem
device uart_ns8250
options GEOM_BSD
options GEOM_MBR
Remove the first three from all kernel configuration files
(sometimes commented-out) and change geom_bsd and geom_mbr
from standard to optional.
