Commit Graph

124 Commits

Author SHA1 Message Date
John Baldwin
068d8643ad Fix various NIC drivers to properly cleanup static DMA resources.
In particular, don't check the value of the bus_dma map against NULL
to determine if either bus_dmamem_alloc() or bus_dmamap_load() succeeded.
Instead, assume that bus_dmamap_load() succeeeded (and thus that
bus_dmamap_unload() should be called) if the bus address for a resource
is non-zero, and assume that bus_dmamem_alloc() succeeded (and thus
that bus_dmamem_free() should be called) if the virtual address for a
resource is not NULL.

In many cases these bugs could result in leaks when a driver was detached.

Reviewed by:	yongari
MFC after:	2 weeks
2014-06-11 14:53:58 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Kevin Lo
87ba494b0e Remove unused variable mii.
This variable is initialized but not used.
2012-05-11 03:17:32 +00:00
Kevin Lo
50e7d31796 Remove duplicate assignment of SF_IMR_RXDQ2_DMADONE bit 2012-02-27 08:55:32 +00:00
Pyun YongHyeon
8e10fb3d0b Add check for IFF_DRV_RUNNING flag after serving an interrupt and
don't give RX path more priority than TX path.
Also remove infinite loop in interrupt handler and limit number of
iteration to 32. This change addresses system load fluctuations
under high network load.
2012-02-23 08:22:44 +00:00
Pyun YongHyeon
1db603d59d With r232015, sf(4) gets correct speed/duplex of established link.
Add more strict speed check in sf_miibus_statchg() and do not touch
MAC config registers when driver lost a link.
2012-02-23 06:35:18 +00:00
Pyun YongHyeon
bc6a83448b Remove taskqueue based MII stat change handler.
Driver does not need deferred link state change processing.
While I'm here, do not report current link status if interface is
not UP.
2012-02-23 06:13:12 +00:00
Pyun YongHyeon
1f8b1fbd02 No need to reprogram hardware RX filter when driver is not running. 2012-02-23 05:25:14 +00:00
Pyun YongHyeon
7ae32f8a3c Introduce sf_ifmedia_upd_locked() and have driver reset PHY before
switching to selected media.  While here, set if_drv_flags before
switching to selected media.
2012-02-23 05:23:21 +00:00
Pyun YongHyeon
0f881e21e5 If there are not enough RX buffers, release partially allocated RX
buffers.
2012-02-23 05:14:11 +00:00
Pyun YongHyeon
911dd7324d Give hardware chance to drain active DMA cycles. 2012-02-23 05:10:00 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
Marius Strobl
d6c65d276e Converted the remainder of the NIC drivers to use the mii_attach()
introduced in r213878 instead of mii_phy_probe(). Unlike r213893 these
are only straight forward conversions though.

Reviewed by:	yongari
2010-10-15 15:00:30 +00:00
Pyun YongHyeon
e9dfd82ff1 Remove unnecessary controller reinitialization.
StarFire controller does not require controller reinitialization to
program perfect filters. While here, make driver immediately exit
from interrupt/polling handler if driver reinitialized controller.

PR:	kern/87506
2010-09-21 17:42:19 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Attilio Rao
1abcdbd127 When user_frac in the polling subsystem is low it is going to busy the
CPU for too long period than necessary.  Additively, interfaces are kept
polled (in the tick) even if no more packets are available.
In order to avoid such situations a new generic mechanism can be
implemented in proactive way, keeping track of the time spent on any
packet and fragmenting the time for any tick, stopping the processing
as soon as possible.

In order to implement such mechanism, the polling handler needs to
change, returning the number of packets processed.
While the intended logic is not part of this patch, the polling KPI is
broken by this commit, adding an int return value and the new flag
IFCAP_POLLING_NOCOUNT (which will signal that the return value is
meaningless for the installed handler and checking should be skipped).

Bump __FreeBSD_version in order to signal such situation.

Reviewed by:	emaste
Sponsored by:	Sandvine Incorporated
2009-05-30 15:14:44 +00:00
Pyun YongHyeon
9a508b89dc Fix build. 2008-01-21 09:51:28 +00:00
Pyun YongHyeon
f2ff94851b Overhaul sf(4) to make it run on all architectures and implement
checksum offoload by downloading AIC-6915 firmware. Changes are
 o Header file cleanup.
 o Simplified probe logic.
 o s/u_int{8,16,32}_t/uint{8,16,32}_t/g
 o K&R -> ANSI C.
 o In register access function, added support both memory mapped and
   IO space register acccess. The function will dynamically detect
   which method would be choosed.
 o sf_setperf() was modified to support strict-alignment
   architectures.
 o Use SF_MII_DATAPORT instead of hardcoded value 0xffff.
 o Added link state/speed, duplex changes handling task q. The task q
   is also responsible for flow control settings.
 o Always hornor link up/down state reported by mii layers. The link
   state information is used in sf_start() to determine whether we
   got a valid link.
 o Added experimental flow-control setup. It was commented out but
   will be activated once we have flow-cotrol infrastructure in mii
   layer.
 o Simplify IFF_UP/IFCAP_POLLING and IFF_PROMISC handling logic. Rx
   filter always honors promiscuous mode.
 o Implemented suspend/resume methods.
 o Reorganized Rx filter routine so promiscuous mode changes doesn't
   require interface re-initialization.
 o Reimplemnted driver probe routine such that it looks for matching
   device from supported hardware list table. This change will help to
   add newer hardware revision to the driver.
 o Use ETHER_ADDR_LEN instead of hardcoded value.
 o Prefer memory space register mapping over I/O space as the hardware
   requires lots of register access to get various consumer/producer
   index. Failing to get memory space mapping, sf(4) falls back to I/O
   space mapping. Use of memory space register mapping requires
   somewhat large memory space(512K), though.
 o Switch to simpler bus_{read,write}_{1,2,4}.
 o Use PCIR_BAR macro to get BARs.
 o Program PCI cache line size if the cache line size was set to 0
   and enable PCI MWI.
 o Add a new sysctl node 'dev.sf.N.stats' that shows various MAC
   counters for Rx/Tx statistics.
 o Add a sysctl node to configure interrupt moderation timer. The
   timer defers interrupts generation until time specified in timer
   control register is expired. The value in the timer register is in
   units of 102.4us. The allowable range for the timer is 0 - 31
   (0 ~ 3.276ms).
   The default value is 1(102.4us). Users can change the timer value
   with dev.sf.N.int_mod sysctl(8) variable/loader(8) tunable.
 o bus_dma(9) conversion
    - Enable 64bit DMA addressing.
    - Enable 64bit descriptor format support.
    - Apply descriptor ring alignment requirements(256 bytes alignment).
    - Apply Rx buffer address alignment requirements(4 bytes alignment).
    - Apply 4GB boundary restrictions(Tx/Rx ring and its completion ring
      should live in the same 4GB address space.)
    - Set number of allowable number of DMA segments to 16. In fact,
      AIC-6915 doesn't have a limit for number of DMA segments but it
      would be waste of Tx descriptor resource if we allow more than 16.
    - Rx/Tx side bus_dmamap_load_mbuf_sg(9) support.
    - Added alignment fixup code for strict-alignment architectures.
    - Added endianness support code in Tx/Rx descriptor access.
    With these changes sf(4) should work on all platforms.
 o Don't set if_mtu in device attach, it's handled in ether_ifattach.
 o Use our own callout to drive watchdog timer.
 o Enable VLAN oversized frames and announce sf(4)'s VLAN capability
   to upper layer.
 o In sf_detach(), remove mtx_initialized KASSERT as it's not possible
   to get there without initialzing the mutex. Also mark that we're
   about to detaching so active bpf listeners do not panic the system.
 o To reduce PCI register access cycles, Rx completion ring is
   directly scanned instead of reading consumer/producer index
   registers. In theory, Tx completion ring also can be directly
   scanned. However the completion ring is composed of two types
   completion(1 for Tx done and 1 and DMA done). So reading producer
   index via register access would be more safer way to detect the
   ring wrap-around.
 o In sf_rxeof(), don't use m_devget(9) to align recevied frames. The
   alignment is required only for strict-alignment architectures and
   now the alignment is handled by sf_fixup_rx() if required. The
   removal of the copy operation in fast path should increase Rx
   performance a lot on non-strict-alignemnt architectures such as
   i386 and amd64.
 o In sf_newbuf(), don't set descriptor valid bit as sf(4) is
   programmed to run with normal mode. In normal mode, the valid bit
   have no meaning. The valid bit should be used only when the
   hardware uses polling(prefetch) mode. The end of descriptor queue
   bit could be used if needed, but sf(4) relys on auto-wrapping of
   hardware on 256 descriptor queue entries so both valid and
   descriptor end bit are not used anymore.
 o Don't disable generation of Tx DMA completion as said in datasheet
   and use the Tx DMA completion entry instead of relying on Tx done
   completion entry. Also added additional Tx completion entry type
   check in Tx completion handler.
 o Don't blindly reset watchdog timer in sf_txeof(). sf(4) now unarm
   the the watchdog only if there are no active Tx descriptors in Tx
   queue.
 o Don't manually update various counters in driver, instead, use
   built-in MAC statistic registers to update them. The statistic
   registers are updated in every second.
 o Modified Tx underrun handlers to increase the threshold value
   in units of 256 bytes. Previously it used to increase 16 bytes
   at a time which seems to take too long to stabalize whenever Tx
   underrun occurrs.
 o In interrupt handler, additional check for the interrupt is
   performed such that interrupts only for this device is allowed to
   process descriptor rings. Because reading SF_ISR register clears
   all interrtups, nuke writing to a SF_ISR register.
 o Tx underrun is abonormal condition and SF_ISR_ABNORMALINTR includes
   the interrupt. So there is no need to inspect the Tx underrun again
   in main interrupt loop.
 o Don't blindly reinitialize hardware for abnormal interrupt
   condition. sf(4) reintializes the hardware only when it encounters
   DMA error which requires an explicit hardware reinitialization.
 o Fix a long standing bug that incorrectly clears MAC statistic
   registers in sf_init_locked.
 o Added strict-alignment safe way of ethernet address reprogramming
   as IF_LLADDR may return unaligned address.
 o Move sf_reset() to sf_init_locked in order to always reset the
   hardware to a known state prior to configuring hardware.
 o Set default Rx DMA, Tx DMA paramters as shown in datasheet.
 o Enable PCI busmaster logic and autopadding for VLAN frames.
 o Rework sf_encap.
     - Previously sf(4) used to type 0 of Tx descriptor with padding
       enabled to store driver private data. Emebedding private data
       structures into descriptors is bad idea as the structure size
       would be different between 64bit and 32bit architectures. The
       type 0 descriptor allows fixed number of DMA segments in
       a descriptor format and provides relatively simple interface to
       manage multi-fragmented frames.
       However, it wastes lots of Tx descriptors as not all frames are
       fragmented as the number of allowable segments in a descriptor.
     - To overcome the limitation of type 0 descriptor, switch to type
       2 descriptor which allows 64bit DMA addressing and can handle
       unliumited number of fragmented DMA segments. The drawback of
       type 2 descriptor is in its complexity in managing descriptors
       as driver should handle the end of Tx ring manually.
    -  Manually set Tx desciptor queue end mark and record number of
       used descriptors to reclaim used descriptors in sf_txeof().
 o Rework sf_start.
     - Honor link up/down state before attempting transmission.
     - Because sf(4) uses only one of two Tx queues, use low priority
       queue instead of high one. This will remove one shift operation
       in each Tx kick command.
     - Cache last produder index into softc such that subsequenet Tx
       operation doesn't need to access producer index register.
 o Rewrote sf_stats_update to include all available MAC statistic
   counters.
 o Employ AIC-6915 firmware from Adaptec and implement firmware
   download routine and TCP/UDP checksum offload.
   Partial checksum offload support was commented out due to the
   possibility of firmware bug in RxGFP.
   The firmware can strip VLAN tag in Rx path but the lack of firmware
   assistance of VLAN tag insertion in transmit side made it useless
   on FreeBSD. Unlike checksum offload, FreeBSD requires both Tx/Rx
   hardware VLAN assistance capability. The firmware may also detect
   wakeup frame and can wake system up from states other than D0.
   However, the lack of wakeup support form D3cold state keep me from
   adding WOL capability. Also detecting WOL frame requires firmware
   support but it's not yet known to me whether the firmware can
   process the WOL frame.
 o Changed *_ADDR_HIADDR to *_ADDR_HI to match other definitions of
   registers.
 o Added definitioan to interrupt moderation related constants.
 o Redefined SF_INTRS to include Tx DMA done and DMA errors. Removed
   Tx done as it's not needed anymore.
 o Added definition for Rx/Tx DMA high priority threshold.
 o Nuked unused marco SF_IDX_LO, SF_IDX_HI.
 o Added complete MAC statistic register definition.
 o Modified sf_stats structure to hold all MAC statistic regiters.
 o Nuke various driver private padding data in Tx/Rx descriptor
   definition. sf(4) no longer requires private padding. Also remove
   unused padding related definitions. This greatly simplifies
   descriptor manipulation on 64bit architectures.
 o Becase we no longer pad driver private data into descriptor,
   remove deprecated/not-applicable comments for padding.
 o Redefine Rx/Tx desciptor status. sf(4) doesn't use bit fileds
   anymore to support endianness.

Tested by:	bruffer (initial version)
2008-01-21 06:38:23 +00:00
Pyun YongHyeon
0e24813a2e It seems that the firmware for TxGFP does not work at all. I could
be wrong but I couldn't find a way to make it work. In addition, the
number of TxGFP instruction does not match the firmware image size,
so I guess something was wrong when Adaptec generated the TxGFP
firmware from their DDK.

According to datasheet, normally, the first GFP instruction would be
opcode C, WaitForStartOfFrame, to synchronize checksumming with
incoming frame. But the first instruction in TxGFP firmware was
opcode 1, BrToImmIfTrue, so it could not process checksum correctly,
I guess. Checking for RxGFP firmware also indicates the first
instruction should be opcode C. Since the number of instructions in
TxGFP firmware lacks exactly one instruction, I prepended the opcode
C to TxGFP firmware image. With this change, the resulting image size
perfectly matches with the nummber of instructions and Tx checksum
offload seems to work without problems.
2008-01-21 05:09:07 +00:00
Pyun YongHyeon
c5d7502930 Import AIC-6915 firmware for GFP from Adaptec.
Special thanks to bruffer to send the firmware image to me.

Submitted by:	gibbs via bruffer
2008-01-21 05:02:44 +00:00
Pyun YongHyeon
1dede5975a Forced commit to note that sf(4) was repocopied from sys/pci
and modified for its new location.
2008-01-21 04:23:47 +00:00
Pyun YongHyeon
6a087a8722 Fix function prototype for device_shutdown method. 2007-11-22 02:45:00 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Ruslan Ermilov
aaf10c46c7 Whitespace nits. 2006-09-15 11:01:23 +00:00
Gleb Smirnoff
cc4c1b6971 Consistently use if_printf() only in interface methods: if_start,
if_ioctl, if_watchdog, etc, or in functions that are used by
these methods only. In all other cases use device_printf().

This also fixes several panics, when if_printf() is called before
softc->ifp was initialized.

Submitted by:	Alex Lyashkov <umka sevcity.net>
2006-09-15 10:40:54 +00:00
John Baldwin
73dbd3da73 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
Gleb Smirnoff
23033eebf4 Do not touch ifp->if_baudrate in miibus aware drivers. 2006-02-14 12:44:56 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Warner Losh
7b279558cc Replace FreeBSD 3.x syntax (controller miibus0) with 4.x syntax
(device miibus) in time for 7.0 :-)
2005-10-22 05:06:55 +00:00
Ruslan Ermilov
e019908ee7 In detach method, move if_free() after bus_teardown_intr(). 2005-10-13 21:11:20 +00:00
Gleb Smirnoff
f0796cd26c - Don't pollute opt_global.h with DEVICE_POLLING and introduce
opt_device_polling.h
- Include opt_device_polling.h into appropriate files.
- Embrace with HAVE_KERNEL_OPTION_HEADERS the include in the files that
  can be compiled as loadable modules.

Reviewed by:	bde
2005-10-05 10:09:17 +00:00
Gleb Smirnoff
4092996774 Big polling(4) cleanup.
o Axe poll in trap.

o Axe IFF_POLLING flag from if_flags.

o Rework revision 1.21 (Giant removal), in such a way that
  poll_mtx is not dropped during call to polling handler.
  This fixes problem with idle polling.

o Make registration and deregistration from polling in a
  functional way, insted of next tick/interrupt.

o Obsolete kern.polling.enable. Polling is turned on/off
  with ifconfig.

Detailed kern_poll.c changes:
  - Remove polling handler flags, introduced in 1.21. The are not
    needed now.
  - Forget and do not check if_flags, if_capenable and if_drv_flags.
  - Call all registered polling handlers unconditionally.
  - Do not drop poll_mtx, when entering polling handlers.
  - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx.
  - In netisr_poll() axe the block, where polling code asks drivers
    to unregister.
  - In netisr_poll() and ether_poll() do polling always, if any
    handlers are present.
  - In ether_poll_[de]register() remove a lot of error hiding code. Assert
    that arguments are correct, instead.
  - In ether_poll_[de]register() use standard return values in case of
    error or success.
  - Introduce poll_switch() that is a sysctl handler for kern.polling.enable.
    poll_switch() goes through interface list and enabled/disables polling.
    A message that kern.polling.enable is deprecated is printed.

Detailed driver changes:
  - On attach driver announces IFCAP_POLLING in if_capabilities, but
    not in if_capenable.
  - On detach driver calls ether_poll_deregister() if polling is enabled.
  - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING
    flag. If there is no, then unlocks and returns.
  - In ioctl handler driver checks for IFCAP_POLLING flag requested to
    be set or cleared. Driver first calls ether_poll_[de]register(), then
    obtains driver lock and [dis/en]ables interrupts.
  - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable.
    If present, then returns.This is important to protect from spurious
    interrupts.

Reviewed by:	ru, sam, jhb
2005-10-01 18:56:19 +00:00
Ruslan Ermilov
3badacee8c Fix "struct ifnet" leaks when attach() fails in the middle, e.g.
when mii_phy_probe() or bus_setup_intr() fails.  For drivers that
call their detach() in this case, call if_free() there to cover
this case too.
2005-09-16 11:11:51 +00:00
John Baldwin
2a3e25a07f Fixup locking for sf(4) and mark MPSAFE:
- Add locked variants of start, init, and ifmedia_upd.
- Use callout_* instead of timeout/untimeout.
- Don't recurse on the driver lock.
- Fixup locking in ioctl.
- Lock the driver lock in the ifmedia handlers rather than across
  ifmedia_ioctl().

Tested by:	brueffer
MFC after:	3 days
2005-08-18 17:09:16 +00:00
John Baldwin
fc8c1e5d98 Use if_printf() and device_printf() and axe sf_unit from the softc as a
result.
2005-08-10 20:24:39 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Brooks Davis
cd036ec193 Move if_alloc() up so it's before mii_phy_probe(). 2005-06-11 01:37:46 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Warner Losh
d24ae19d0e Fix style(9) issues with __P removal.
Noticed by: bde
2005-02-24 22:33:05 +00:00
Warner Losh
d701c91325 Return BUS_PROBE_DEFAULT instead of 0. 2005-02-24 21:32:56 +00:00
Warner Losh
60727d8b86 /* -> /*- for license, minor formatting changes 2005-01-07 02:29:27 +00:00
Christian Brueffer
b0103a491a Correct URL of the programming manual. 2004-11-17 23:36:11 +00:00
Christian Brueffer
b0452ccacc Add missing /* DEVICE_POLLING */ 2004-11-17 23:33:56 +00:00
Christian Brueffer
a62ba928f7 Add altq support.
Patch by mlaier.

Approved by:	mlaier
MFC after:	2 weeks
2004-11-12 18:12:04 +00:00
Christian Brueffer
1f606ecd84 Add device polling support
Original patch by me, improvements by ru

Happy birthday to:	BSDforen.de!
Approved by:		ru
MFC after:		2 weeks
2004-11-10 23:04:39 +00:00
Robert Watson
2a567ae5ec Tag a last set of PCI network interfaces as IFF_NEEDSGIANT until they
are either locked down or demonstrated MPSAFE.
2004-08-28 15:10:35 +00:00