Commit Graph

847 Commits

Author SHA1 Message Date
Monthadar Al Jaberi
46684c91ec Update HWMP Proactive code and mesh route flags.
* Modified hwmp_recv_preq:
    o cleaned up code, removed rootmac variable because preq->origaddr
      is the root when we recevie a Proactive PREQ;
    o Modified so that a PREP in response of a Proactive PREQ is unicast,
      a PREP is ALWAYS unicast;
* Modified hwmp_recv_prep:
    o Before we mark a route to be valid we should remove the discovery
      flag and then mark it valid in such a way we wont lose the isgate flag;

Approved by: adrian
2012-05-01 16:18:38 +00:00
Monthadar Al Jaberi
47451c661b PREQ discovery update.
* Added a new discovery flag IEEE80211_MESHRT_FLAGS_DISCOVER;
* Modified ieee80211_ioctl.h to include IEEE80211_MESHRT_FLAGS_DISCOVER;
* Added hwmp_rediscover_cb, which will be called by a timeout to do
rediscovery if we have not reach max number of preq discovery;
* Modified hwmp_discover to setup a callout for path rediscovery;
* Added to ieee80211req_mesh_route to have a back pointer to ieee80211vap
for the discovery callout context;
* Modified mesh_rt_add_locked arguemnt from ieee80211_mesh_state to
ieee80211vap, this because we have to initialize the above back pointer;

Approved by: adrian
2012-05-01 16:16:20 +00:00
Monthadar Al Jaberi
9fc85253aa Net80211s update: Mesh Gate Announcement and removal of Portal Announcement.
* Renamed IEEE80211_ELEMID_MESHPANN to IEEE80211_ELEMID_MESHGANN according to
 amendment;
 * Added IEEE80211_IOC_MESH_GATE that controls whether Mesh Gate Announcement
 is activated or not;
 * Renamed all flags from Portal to Gate in HWMP frames;
 * Removed IEEE80211_ACTION_MESHPANN enum cause its part of the Mesh Action
 category now as per amendment;
 * Renamed IEEE80211_MESHFLAGS_PORTAL to IEEE80211_MESHFLAGS_GATE in
 ieee80211_mesh_state flags;
 * Modified ieee80211_hwmp.c/ieee80211_mesh.c to use new GATE flags;

Approved by: adrian
2012-05-01 16:14:18 +00:00
Monthadar Al Jaberi
f02ce81b16 RANN update
* Introduced a new HWMP sysctl, Root Confirmation Interval;
* Added hr_lastrootconf to hwmp_route, is for ratecheck for a specific ROOT;
* We missed reading RANN.interval subfield from a RANN frame before;
* Updated hwmp_recv_rann according to amendment, see comments;

Approved by: adrian
2012-05-01 16:13:22 +00:00
Monthadar Al Jaberi
3db825165a PERR update to be called from mesh code.
* Added mpp_senderror for Mesh Path Selection protocol;
* Added hwmp_senderror that will send an HWMP PERR according to the
supplied reason code;
* Call mpp_senderror when deleting a route with correct reason code
for whether the route is marked proxy or not;
* Call mpp_senderror when trying to forward an individually addressed
frame and there is no forwarding information;

Approved by: adrian
2012-05-01 16:12:39 +00:00
Monthadar Al Jaberi
d421a252f6 * Modified PERR acceptance criteria according to amendment;
* Modified how PERR is handled and propagated according to amendment;

Approved by: adrian
2012-05-01 16:11:47 +00:00
Monthadar Al Jaberi
c0985dbc7a Updated PREQ propagation code;
* When receiving a Proactive PREQ dont return after processing it but propagate;
* When we propagate we should not enforce ratechecking;
* Added checking for multiple pred ID detection;
* Storing proxy orig address when PREQ is not for us;

Approved by: adrian
2012-05-01 16:10:32 +00:00
Monthadar Al Jaberi
52e45fc074 * PREQ acceptance criteria updated to check for proxy condition as in amendment;
Approved by: adrian
2012-05-01 16:09:44 +00:00
Monthadar Al Jaberi
53c35d21d5 * Proactive PREQ (original transmission) must also set
IEEE80211_MESHPREQ_TFLAGS_USN flag in target_flag field;

Approved by: adrian
2012-05-01 16:08:46 +00:00
Monthadar Al Jaberi
7b977be4d0 * Fixed hwmp_discover code to populate a PREQ packet correctly;
* Removed IEEE80211_MESHPREQ_TFLAGS_RF which is no longer part of the
amendment spec;

Approved by: adrian
2012-05-01 16:07:35 +00:00
Monthadar Al Jaberi
3d7486ce50 * Fixed PREQ flag field Adressing mode subfiled according to amendment specs;
Approved by: adria
2012-05-01 16:06:20 +00:00
Monthadar Al Jaberi
79b9f8c6b4 * Added a mesh max PREQ retires sysctl that governous how many times
we try to discover an address;
* Added a mesh net travelse time across an MBSS, which is used to enforce
discovery rate check;

Approved by: adrian
2012-05-01 16:05:09 +00:00
Monthadar Al Jaberi
8ccfff66c1 Change how we enforce PREQ minimum interval.
* Moved hs_lastpreq to be hr_lastpreq cause this rate check should be per
target mesh STA according to amendment (NB: not applicable for PERR);
* Modified hwmp_send_preq to use two extra arguments for last sent PREQ and
minimum PREQ interval;
* hwmp_send_preq is called with last two arguments equal to NULL when sending
Proactive PREQs cause the call back task enforces the rate check;

Approved by: adrian
2012-05-01 16:03:27 +00:00
Monthadar Al Jaberi
644ccee405 PREP update
* Added assertion in mesh_rt_update;
* Fixed some prep propagation that where multicast, ALL PREPS ARE UNICAST;
* Fixed PREP acceptance criteria;
* Fixed some PREP debug messages;
* HWMP intermediate reply (PREP) should only be sent if we have newer
forwarding infomration (FI) about target;
* Fixed PREP propagation condition and PREP w/ AE handling;
* Ignore PREPs that have unknown originator.
* Removed old code inside PREP that was for proactive path building
to root mesh;

Other errors include:
* use seq number of target and not orig mesh STA;
* Metric is what we have stored in our FI;
* Error in amendment, Hop count is not 0 but equals FI hopcount for target;

Approved by: adrian
2012-05-01 16:02:31 +00:00
Monthadar Al Jaberi
737a965ec9 * MeshForwarding update mesh_recv_indiv_data_to_fwrd to silently discard
unknown meshDA instead of panic, which is allowed per amendment spec;

Approved by: adrian
2012-05-01 16:00:31 +00:00
Monthadar Al Jaberi
4f3a27ae65 Added route lifetime update for destination and source mesh along a mesh path;
* In mesh_recv_indiv_data_to_fwd update route entry for both meshDA and meshSA;
 * In mesh_recv_indiv_data_to_me update route entry for meshSA;
 * in ieee80211_mesh_rt_update put code so that a proxy entry that is gated
 by us (number of hops == 0) is never invalidated;
 * Fixed so that we always call ieee80211_mesh_rt_update with lifetime in ms;

Approved by: adrian
2012-05-01 15:58:10 +00:00
Monthadar Al Jaberi
3c314f6dc3 Mesh forwarding with proxy support.
* Modified HWMP PREP/PREQ to contain a proxy entry and also changed PREP
frame processing according to amendment as following:
        o Fixed PREP to always update/create if acceptance criteria is meet;
        o PREQ processing to reply if request is for a proxy entry that is
          proxied by us;
        o Removed hwmp_discover call from PREQ, because sending a PREP will
          build the forward path, and by receving and accepting a PREQ we
          have already built the reverse path (non-proactive code);
* Disabled code for pro-active in PREP for now (will make a separate patch for
pro-active HWMP routing later)
* Added proxy information for a Mesh route, mesh gate to use and proxy seqno;
* Modified ieee80211_encap according to amendment;
* Introduced Mesh control address extension enum and removed unused struct,
also rename some structure element names.
* Modified mesh_input and added mesh_recv_* that should verify and process mesh
data frames according to 9.32 Mesh forwarding framework in amendment;
* Modified mesh_decap accordingly to changes done in mesh control AE struct;

Approved by: adrian
2012-05-01 15:56:26 +00:00
Monthadar Al Jaberi
b5df85a6fd Implemented so that Mesh forwarding information lifetime is dynamic.
* Introduced ieee80211_mesh_rt_update that updates a route with the
 maximum(lifetime left, new lifetime);
 * Modified ieee80211_mesh_route struct by adding a lock that will be used
 by both ieee80211_mesh_rt_update and precursor code (added in future commit);
 * Modified in ieee80211_hwmp.c HWMP code to use new ieee80211_mesh_rt_update;
 * Modified mesh_rt_flush_invalid to use new ieee80211_mesh_rt_update;
 * mesh_rt_flush also checks that lifetime == 0, this gives route discovery
 a change to complete;
 * Modified mesh_recv_mgmt case IEEE80211_FC0_SUBTYPE_BEACON:
 when ever we received a beacon from a neighbor we update route lifetime;

Approved by: adrian
2012-05-01 15:47:30 +00:00
Monthadar Al Jaberi
6eb9b443f4 Fixed some MPM reason codes and max number of neighbors check
* Added IEEE80211_MESH_MAX_NEIGHBORS and it is set to 15, same as before;
 * Modified mesh_parse_meshpeering_action to verify MPM frame and send
 correct reason code for when a frame is rejected according to standard spec;
 * Modified mesh_recv_action_meshpeering_* according to the standard spec;
 * Modified mesh_peer_timeout_cb to always send CLOSE frame when in CONFIRMRCV
 state according to the standard spec;

Approved by: adrian
2012-05-01 15:42:41 +00:00
Monthadar Al Jaberi
c2042c359f Modified structure and code that handles Mesh peering management.
* Old struct ieee80211_meshpeer_ie had wrong peer_proto field size;
 * Added IEEE80211_MPM_* size macros;
 * Created an enum for the Mesh Peering Protocol Identifier field according
 to the standard spec and removed old defines;
 * Abbreviated Handshake Protocol is not used by the standard anymore;
 * Modified mesh_verify_meshpeer to use IEEE80211_MPM_* macros for verification;
 * Modified mesh_parse_meshpeering_action to parse complete frame, also to parse
 it according to the standard spec;
 * Modified ieee80211_add_meshpeer to construct correct MPM frames according to
 the standard spec;

Approved by: adrian
2012-05-01 15:39:16 +00:00
Monthadar Al Jaberi
ebeaa1ade5 Added Self-protected action category (including MPM).
* Added new action category IEEE80211_ACTION_CAT_SELF_PROT which is used by 11s
for Mesh Peering Management;
* Updated Self protected enum Action codes to start from 1 instead of 0
according to the standard spec;
* Removed old and wrong action categories IEEE80211_ACTION_CAT_MESHPEERING;
* Modified ieee80211_mesh.c and ieee80211_action.c to use the new action
category code;
* Added earlier verification code in ieee80211_input;

Approved by: adrian
2012-05-01 15:35:10 +00:00
Adrian Chadd
2aa563dfeb Migrate the net80211 TX aggregation state to be from per-AC to per-TID.
TODO:

* Test mwl(4) more thoroughly!

Reviewed by:	bschmidt (for iwn)
2012-04-15 20:29:39 +00:00
Adrian Chadd
fcacf9318c Add some statistics to track BAR TX. 2012-04-08 04:51:25 +00:00
Bernhard Schmidt
a2a4a2aa53 Add basic HT channel setup to ieee80211_init_channels(), this will be
used by at least ral(4).

Reviewed by:	ray
2012-04-03 17:48:42 +00:00
Adrian Chadd
e789273713 Correct the ordering of tid/crypto ic_name.
Because the code lacks all the GNU extensions to printf() format stuff,
the compiler doesn't helpfully tell us that I messed up in a previous
commit.

Pointy hat to: adrian, who likely only cares about this because he's the
  only one who bothers flipping on net80211 debugging.
2012-03-27 04:15:38 +00:00
Adrian Chadd
b94299c437 Create a new task to handle 802.11n channel width changes.
Currently, a channel width change updates the 802.11n HT info data in
net80211 but it doesn't trigger any device changes.  So the device
driver may decide that HT40 frames can be transmitted but the last
device channel set only had HT20 set.

Now, a task is scheduled so a hardware reset or change isn't done
during any active ongoing RX. It also means that it's serialised
with the other task operations (eg channel change.)

This isn't the final incantation of this work, see below.

For now, any unmodified drivers will simply receive a channel
change log entry.  A subsequent patch to ath(4) will introduce
some basic channel change handling (by resetting the NIC.)
Other NICs may need to update their rate control information.

TODO:

* There's still a small window at the present moment where the
  channel width has been updated but the task hasn't been fired.
  The final version of this should likely pass in a channel width
  field to the driver and let the driver atomically do whatever
  it needs to before changing the channel.

PR:		kern/166286
2012-03-25 03:11:57 +00:00
Adrian Chadd
dc1f12bf69 Re-commit this - store the alq payload in network order. 2012-03-21 03:19:50 +00:00
Adrian Chadd
bca1cc1fd2 .. revert out a local change that I hadn't yet completely finished fleshing
out and testing.

sorry!
2012-03-18 21:54:59 +00:00
Adrian Chadd
ee56d93281 Add a missing endian conversion. 2012-03-18 19:35:30 +00:00
Adrian Chadd
a284b01037 Pull in a dependency on ALQ if it's compiled with IEEE80211_ALQ. 2012-03-16 23:08:13 +00:00
Adrian Chadd
561bc9b3e4 Add missing \n's.
This showed up when testing the wtap module, as it attaches with
no radiotap tx/rx configuration.
2012-03-08 23:46:42 +00:00
Adrian Chadd
1f88a92ba9 Modify HWMP to be able to allocate memory for PREQ/PREP/PERR for all scenarios.
* Added verify_mesh_*_len functions that verify the length
  according to the amendment spec and return number of destination addresses
  for allocation of appropriate struct size in memory;
* Modified hwmp_recv_action_meshpath to allocate HWMP ie instead of
  storing them on the stack and store all available field according the flags;
* Modify hwmp_add_mesh* to work with all cases of HWMP according to amendment.
* Modify hwmp_send_* to calculate correct len of bytes for the HWMP ie.
* Added new M_80211_MESH_* malloc defines.
* Added macros with magic numbers for HWMP ie sizes according to amendment.
* Added the external address to all HWMP ie structs.

Submitted by:	monthadar@gmail.com
2012-03-06 21:20:16 +00:00
Adrian Chadd
05f91fa06a Oops - used the wrong field.
Noticed by:	nwhitehorn
2012-03-05 02:36:15 +00:00
Adrian Chadd
cf42b1cce7 Add the thread id to the net80211 alq records.
This will (hopefully) aid in debugging concurrency related issues.
2012-03-04 23:13:52 +00:00
Adrian Chadd
22eeb8c617 Fix style(9) issues. 2012-03-04 23:04:16 +00:00
Gleb Smirnoff
dbab732d75 Fix build w/o 'options IEEE80211_SUPPORT_MESH'. 2012-03-04 09:45:43 +00:00
Adrian Chadd
91216c714c * Introduce new flag for QoS control field;
* Change in mesh_input to validate that QoS is set and Mesh Control field
  is present, also both bytes of the QoS are read;
* Moved defragmentation in mesh_input before we try to forward packet as
  inferred from amendment spec, because Mesh Control field only present in first
  fragment;
* Changed in ieee80211_encap to set QoS subtype and Mesh Control field present,
  only first fragment have Mesh Control field present bit equal to 1;

Submitted by:	monthadar@gmail.com
2012-03-04 05:52:26 +00:00
Adrian Chadd
bdd2a07668 * Added IEEE80211_ACTION_CAT_MESH in ieee80211.h as specified amendment spec;
* Moved old categories as specified by D4.0 to be action fields of MESH category
  as specified in amendment spec;
* Modified functions to use MESH category and its action fields:
  + ieee80211_send_action_register
  + ieee80211_send_action
  + ieee80211_recv_action_register
  +ieee80211_recv_action;
* Modified ieee80211_hwmp_init and hwmp_send_action so they uses correct
  action fields as specified in amendment spec;
* Modified ieee80211_parse_action so that it verifies MESH frames.
* Change Mesh Link Metric to use one information element as amendment spec.
  Draft 4.0 defined two different information elements for request and response.

Submitted by:	monthadar@gmail.com
2012-03-04 05:49:39 +00:00
Adrian Chadd
66b74386c7 Attempt to catch scan cancellations at exactly the wrong time from occuring.
The scan code unlocks the comlock and calls into the driver.  It then
assumes the state hasn't changed from underneath it.

Although I haven't seen this particular condition trigger, I'd like to
be informed if I or anyone else sees it.

What I'm thinking may occur:

* A cancellation comes in during the scan_end call;
* the cancel flag is set;
* but it's never checked, so scandone isn't updated;
* .. and the interface stays in the STA power save mode.

It's a subtle race, if it even exists.

PR:		kern/163318
2012-03-02 02:53:43 +00:00
Adrian Chadd
e168e5f947 Only increment is_beacon_bad if we're not scanning.
Otherwise things such as off-channel probe responses and beacons are also
silently discarded and logged against this error counter.
2012-02-28 21:43:29 +00:00
Adrian Chadd
de6818224d Print out the bogus beacon interval. 2012-02-28 21:41:47 +00:00
Adrian Chadd
fd9a6137da Track the number of bad beacons received.
PR:		kern/165517
2012-02-28 04:05:35 +00:00
Adrian Chadd
70e0b5ac20 Hold IF_LOCK when manipulating the interface flags.
It doesn't _really_ help all that much, I'll commit something to
sys/net/if.c at some point explaining why, but the lock should be held
when checking/manipulating/branching because of said lock.
2012-02-24 05:40:36 +00:00
Adrian Chadd
dcc56af073 Although it's documented that the vap newstate call can drop the
comlock, I'd like to find and analyse these cases to see if they
really are valid.

So, throw in a lock here and wait for the (hopefully!) inevitable
complaints.
2012-02-24 05:39:00 +00:00
Adrian Chadd
3ec1a8c90c Add a radiotap vendor header definition. 2012-02-24 05:33:11 +00:00
Aleksandr Rybalko
0fecd54d7a Remove redundant forward declaration of struct ieee80211com.
Approved by:	bschmidt
2012-02-20 15:05:21 +00:00
Adrian Chadd
81b95c2cc7 Correct the 802.11s mesh configuration structure and related tidbits.
* Change the mesh IE size to be IEEE80211_MESH_CONF_SZ rather than the
  size of the structure;
* conf_cap is now a uint8_t rather than a uint16_t (uint16_t in D3.0,
  uint8_t in the amendment spec);
* Update mesh config capability bits - earlier bits were from draft X,
  current is amendment spec;
* Update the following to be an enum rather than #define and added
  a VENDOR entry too from the amendment spec;
  IEEE80211_MESHCONF_PATH_*
  IEEE80211_MESHCONF_METRIC_*
  IEEE80211_MESHCONF_CC_*
  IEEE80211_MESHCONF_SYNC_*
  IEEE80211_MESHCONF_AUTH_*
* Kept IEEE80211_MESHCONF_FORM_* and IEEE80211_MESHCONF_CAP_* as
  defines because they are defined in a way that we need to mask in/out
  information;
* In IEEE80211_MESHCONF_CAP_* IEEE80211_MESHCONF_CAP_TBTTA is removed
  and 0x80 is made reserved as defined in the amendment spec.

Submitted by:	monthadar@gmail.com
Reviewed by:	rpaulo
2012-02-13 07:47:36 +00:00
Adrian Chadd
60084eb481 Update the 802.11s IE numbers to represent the latest 802.11 amendment standard.
Submitted by:	monthadar@gmail.com
Reviewed by:	rpaulo
2012-02-08 06:56:19 +00:00
Adrian Chadd
39b86fdc25 Update the mesh reason codes to match the latest 802.11s specification.
Submitted by:	<monthadar@gmail.com>
Reviewed by:	rpaulo
2012-02-06 00:26:29 +00:00
Rui Paulo
1616ed91c2 Whitespace removal. 2012-02-03 02:06:14 +00:00