With command serialization used in CTL, there are no other commands to abort
when PREEMPT AND ABORT gets to run, so it is practically equal to PREEMPT.
MFC after: 1 week
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
The prior change to not enable LRO by default has confused several
people. The configurations where LRO is problematic is not the
typical use case for VirtIO, and due to other issues, this often
requires checksum offloading to be disabled anyways.
PR: 185864
MFC after: 2 weeks
It isn't safe to keep unreferenced ifaddrs. Use in6ifa_ifwithaddr() to
determine ifaddr corresponding to destination address. Since currently
we keep addresses with embedded scope zone, in6ifa_ifwithaddr is called
with zero zoneid and marked with XXX.
Also remove route and lle lookups from ip6_input. Use in6ifa_ifwithaddr()
instead.
Sponsored by: Yandex LLC
gcc requires variables to be initialised in two places. One of them
is correctly used only under the same conditional though.
For module builds properly check if the kernel supports INET or INET6,
as otherwise various mips kernels without IPv6 support would fail to build.
Create a proper stack frame for amd64 version of bcopy(). Note that
this also makes the stack properly aligned in the function, despite it
is not strictly needed.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- Remove duplicated sources between standard part of the kernel and
module. In particular, it caused duplicated lock initialization and
sysctl registration, both having bad consequences.
- Add missed source files to module.
- Static part of the kernel provides randomdev module, not
random_adaptors. Correct dependencies.
- Use cdev modules declaration macros.
Approved by: secteam (delphij)
Reviewed by: markm
buffer from asm to C, which reduces amount of arguments for inline asm
and simplifies constraints. Use unsigned types consistently.
Submitted by: bde
Approved by: secteam (delphij)
Reviewed by: markm
MFC after: 1 week
After resource allocation and release, resource list entry
stays non-NULL. This causes panic in ofwbus_alloc_resource()
on subsequent resource allocation.
Clean appropriate list entry on release to avoid this.
Obtained from: Semihalf
Reviewed by: ian
Sponsored by: The FreeBSD Foundation
Split it into two modules: if_gre(4) for GRE encapsulation and
if_me(4) for minimal encapsulation within IP.
gre(4) changes:
* convert to if_transmit;
* rework locking: protect access to softc with rmlock,
protect from concurrent ioctls with sx lock;
* correct interface accounting for outgoing datagramms (count only payload size);
* implement generic support for using IPv6 as delivery header;
* make implementation conform to the RFC 2784 and partially to RFC 2890;
* add support for GRE checksums - calculate for outgoing datagramms and check
for inconming datagramms;
* add support for sending sequence number in GRE header;
* remove support of cached routes. This fixes problem, when gre(4) doesn't
work at system startup. But this also removes support for having tunnels with
the same addresses for inner and outer header.
* deprecate support for various GREXXX ioctls, that doesn't used in FreeBSD.
Use our standard ioctls for tunnels.
me(4):
* implementation conform to RFC 2004;
* use if_transmit;
* use the same locking model as gre(4);
PR: 164475
Differential Revision: D1023
No objections from: net@
Relnotes: yes
Sponsored by: Yandex LLC
it, except Ethernet, where it carried ng_ether(4) pointer.
For now carry the pointer in if_l2com directly.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- Support the KDB alt break sequence to enter the debugger,
panic, reboot, etc. [1]
- Provide emergency write feature description. Note that QEMU
does not implement this feature.
- Make the VTCON_FLAG_* defines sequential once again.
- When the multiple port feature is not negotiated, query the
rows and columns of the one console during the device attach
when the size feature is negotiated.
- Report failure to the device if hot plugging a port fails.
- Acknowledge the console port event with an open event. This
is required by the spec, but QEMU doesn't seem to care.
Submitted by: Juniper [1]
MFC after: 1 month
-Improved VF stability, thanks to changes from Ryan Stone,
and Juniper.
- RSS fixes in the ixlv driver
- link detection in the ixlv driver
- New sysctl's added in ixl and ixlv
- reset timeout increased for ixlv
- stability fixes in detach
- correct media reporting
- Coverity warnings fixed
- Many small bug fixes
- VF Makefile modified - nvm shared code needed
- remove unused sleep channels in ixlv_sc struct
Submitted by: Eric Joyner (committed by jfv)
MFC after: 1 week
It turns out an alignment of zero can lead to an endless loop in the
vm reservations code, so specifically disallow that. The manpage says
hardware which can do dma at any address should use a value of one, which
hints at the forbiddeness of zero without exactly saying it. Several
other conditions which could lead to insanity in working with the tag are
also checked now.
Every existing call to bus_dma_tag_create() (about 680 of them) was
eyeballed for violations of these things, and two alignment=0 glitches
were fixed. It's possible something was missed, but overall this
shouldn't lead to any arm users suddenly experiencing failures.
problems than it solves. SYSDIR is already defined almost always and
can be used instead. Working around the one case where it isn't is
much easier than working around the fact that @ may not exist in 18
other places.
Differential Revision: https://reviews.freebsd.org/D1100
Some virtual if drivers has (ab)used ifa ifa_rtrequest hook to enforce
route MTU to be not bigger that interface MTU. While ifa_rtrequest hooking
might be an option in some situation, it is not feasible to do MTU checks
there: generic (or per-domain) routing code is perfectly capable of doing
this.
We currrently have 3 places where MTU is altered:
1) route addition.
In this case domain overrides radix _addroute callback (in[6]_addroute)
and all necessary checks/fixes are/can be done there.
2) route change (especially, GW change).
In this case, there are no explicit per-domain calls, but one can
override rte by setting ifa_rtrequest hook to domain handler
(inet6 does this).
3) ifconfig ifaceX mtu YYYY
In this case, we have no callbacks, but ip[6]_output performes runtime
checks and decreases rt_mtu if necessary.
Generally, the goals are to be able to handle all MTU changes in
control plane, not in runtime part, and properly deal with increased
interface MTU.
This commit changes the following:
* removes hooks setting MTU from drivers side
* adds proper per-doman MTU checks for case 1)
* adds generic MTU check for case 2)
* The latter is done by using new dom_ifmtu callback since
if_mtu denotes L3 interface MTU, e.g. maximum trasmitted _packet_ size.
However, IPv6 mtu might be different from if_mtu one (e.g. default 1280)
for some cases, so we need an abstract way to know maximum MTU size
for given interface and domain.
* moves rt_setmetrics() before MTU/ifa_rtrequest hooks since it copies
user-supplied data which must be checked.
* removes RT_LOCK_ASSERT() from other ifa_rtrequest hooks to be able to
use this functions on new non-inserted rte.
More changes will follow soon.
MFC after: 1 month
Sponsored by: Yandex LLC
We have observed that arc_release() can be called concurrently with a
l2arc in-flight write.
Also, we have observed that arc_hdr_destroy() can be called from
arc_write_done() for a zio with ZIO_FLAG_IO_REWRITE flag in similar
circumstances.
Previously the l2arc headers would be freed while leaking their
associated compression buffers. Now the buffers are placed on
l2arc_free_on_write list for delayed freeing. This is similar to what
was already done to arc buffers that were supposed to be freed
concurrently with in-flight writes of those buffers.
In addition to fixing the discovered leaks this change also adds some
protective code to assert that a compression buffer associated with a
l2arc header is never leaked.
A new kstat l2_cdata_free_on_write is added. It keeps a count of
delayed compression buffer frees which previously would have been leaks.
Tested by: Vitalij Satanivskij <satan@ukr.net> et al
Requested by: many
MFC after: 2 weeks
Sponsored by: HybridCluster / ClusterHQ
It returns only current working directory of given process which saves a lot of
overhead over kern.proc.filedesc if given proc has a lot of open fds.
Submitted by: Tiwei Bie <btw mail.ustc.edu.cn> (slightly modified)
X-Additional: JuniorJobs project
For ZVOL-backed LUNs this allows to inform initiators if storage's used or
available spaces get above/below the configured thresholds.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
According to IANA RPC uaddr registry, there are no AFs
except IPv4 and IPv6, so it's not worth being too abstract here.
Remove ne_rtable[AF_MAX+1] and use explicit per-AF radix tries.
Use own initialization without relying on domattach code.
While I admit that this was one of the rare places in kernel
networking code which really was capable of doing multi-AF
without any AF-depended code, it is not possible anymore to
rely on dom* code.
While here, change terrifying "Invalid radix node head, rn:" message,
to different non-understandable "netcred already exists for given addr/mask",
but less terrifying. Since we know that rn_addaddr() returns NULL if
the same record already exists, we should provide more friendly error.
MFC after: 1 month
Therefore, to set histry size to 2000 lines, add the following line to
your kernel configuration file:
options SC_HISTORY_SIZE=2000
The default history remains at 500 lines.
MFC after: 1 week
some accumulated entropy twice and use that as the new key. Due to a
typo, we were using the output of the first hash round instead of the
second. Correct this, but eliminate temp[] since we can reuse hash[].
Also add comments explaining what is going on and why.
Noticed by: Sami Farin <sami.farin@gmail.com>
Reviewed by: markm@
Approved by: so (des)
default_pager_putpages() and swap_pager_putpages().
It is the same fix as was done for vnode_pager_putpages()
in r271586.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
especially for platforms where unaligned access is not allowed. Make
it possible to override the small buffer size.
A simple continuous read string test using libusb showed a reduction
in CPU usage from roughly 10% to less than 1% using a dual-core GHz
CPU, when the malloc() operation was skipped for small buffers.
MFC after: 2 weeks
vt(4) is a new console driver which brings features such as:
o Support for Unicode and double-width characters
o Integration with the KMS kernel video drivers
o Support for UEFI
You may need to update your console settings in /etc/rc.conf, most
probably the keymap. During boot, /etc/rc.d/syscons will indicate what
you need to do.
vt(4) still has issues and lacks some features compared to syscons(4).
See the wiki for up-to-date information:
https://wiki.freebsd.org/Newcons
If you want to keep using syscons(4), you can do so by adding the
following line to /boot/loader.conf:
kern.vty=sc
Differential Revision: https://reviews.freebsd.org/D1005
Discussed with: emaste@, nwhitehorn@, ray@
Relnotes: yes
on my part about north bridge/GPU pci ids and use of aperture.
Leave the agp_intel.c out of static compilation on amd64, it makes the
things consistent with agp.ko.
Pointed out by: tijl
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
... and their associated tunables. This gives a way to know the list of
available connectors, no matter the driver.
The problem is that xrandr(1) can list connectors but it uses a
different naming.
MFC after: 1 week
Impact on capability races was small: it was possible to get a spurious
ENOTCAPABLE (early return), but it was not possible to bypass checks.
Tidy up some comments.
875. This intersects with the agp_i810.c, which supports all Intels
from i810 to Core i5/7. Both agp_intel.c and agp_i810.c are compiled
into kernel when device agp is specified in config, and agp_i810
attach seems to be selected by chance due to linking order.
Strip support for 810 and later from agp_intel.c. Since 440-class
chipsets do not support any long-mode capable CPUs, remove agp_intel.c
from amd64 kernel file list. Note that agp_intel.c is not compiled
into agp.ko on amd64 already.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
talked about. Explain where the mentioned trampoline located
(usermode), and the fact that attempt to exit last thread is denied in
kernel (by delegating the work to usermode).
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
By default, vt(4) gets the "preferred mode" from DRM, when using a DRM
video driver as its backend. The preferred mode is usually the native
screen resolution.
Now, if this mode isn't appropriate, a user can use loader tunables to
select a mode. The tunables are read in the following order:
1. kern.vt.fb.modes.$connector_name
2. kern.vt.fb.default_mode
For example, to set a 1024x768 mode, no matter the connector:
kern.vt.fb.default_mode="1024x768"
To set a 800x600 mode only on the laptop builtin screen:
kern.vt.fb.modes.LVDS-1="800x600"
MFC after: 1 week
Currently sizeof(struct filedesc0) is 1096 bytes, which means allocations from
malloc use 2048 bytes.
There is no easy way to shrink the structure <= 1024 an it is likely to grow in
the future.
random_adaptors_lock is held.
- Use sx_sleep instead of tsleep in read and write path to allow
another thread that registers a new random adapter when waiting.
Assert that random_adaptor is not NULL after reacquiring the lock.
- Capture EINTR/ERESTART from sx_sleep to allow the blocking cycle be
stopped when user requests so, while there also make short
read/write's return 0.
- Move M_WAITOK allocations out of lock scope.
In collobration with: kib, markm, ian, jilles
Reviewed by: kib, markm
Approved by: so
support for AVX on i386.
- Similar to amd64, move the FPU save area out of the PCB and instead
store saved FPU state in a variable-sized buffer after the PCB on the
stack.
- To support the variable PCB location, alter the locore code to only use
the bottom-most page of proc0stack for init386(). init386() returns
the correct stack pointer to locore which adjusts the stack for thread0
before calling mi_startup().
- Don't bother setting cr3 in thread0's pcb in locore before calling
init386(). It wasn't used (init386() overwrote it at the end) and
it doesn't work with the variable-sized FPU save area.
- Remove the new-bus attachment from npx. This was only ever useful for
external co-processors using IRQ13, but those have not been supported
for several years. npxinit() is now called much earlier during boot
(init386()) similar to amd64.
- Implement PT_{GET,SET}XSTATE and I386_GET_XFPUSTATE.
- npxsave() is now only called from context switch contexts so it can
use XSAVEOPT.
Differential Revision: https://reviews.freebsd.org/D1058
Reviewed by: kib
Tested on: FreeBSD/i386 VM under bhyve on Intel i5-2520
The problem was that only the kbdmux keyboard index was saved in
vd->vd_keyboard. This index is -1 when kbdmux isn't used. In this
case, the keyboard was correctly allocated, but the returned index was
discarded.
PR: 194718
MFC after: 1 week
are not suspended. In particular, on the SU-enabled vulumes, there is
no reason why, between the call to softdep_flushfiles() and
softdep_waitidle(), SU work items cannot be queued.
Correct the condition to trigger the panic by only checking when
forced operation is done. Convert direct panic() call into KASSERT(),
there is no invalid on-disk data structures directly involved, so
follow the usual debugging vs. non-debugging approach.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
whether the shared request for already shared-locked lock could be
granted. Both problems result in the exclusive locker starvation.
The concurrent exclusive request is indicated by either
LK_EXCLUSIVE_WAITERS or LK_EXCLUSIVE_SPINNERS flags. The reverse
condition, i.e. no exclusive waiters, must check that both flags are
cleared.
Add a flag LK_NODDLKTREAT for shared lock request to indicate that
current thread guarantees that it does not own the lock in shared
mode. This turns back the exclusive lock starvation avoidance code;
see man page update for detailed description.
Use LK_NODDLKTREAT when doing lookup(9).
Reported and tested by: pho
No objections from: attilio
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
updating the GTT and flushing the AGP TLB by storing the GTT in
write-combining memory.
On x86 flushing the AGP TLB is done by an I/O operation or a store to a
MMIO register in uncacheable memory. Both cases imply that WC buffers are
flushed so no memory barriers are needed.
On powerpc there is no WC memory type. It maps to uncacheable memory and
two stores to uncacheable memory, such as to the GTT and then to an MMIO
register, are strongly ordered, so no memory barriers are needed either.
MFC after: 1 month
moving U-Boot specific code from libfdt.a to a new libuboot_fdt.a. This
needs to be a new library for linking to work correctly.
Differential Revision: https://reviews.freebsd.org/D1054
Reviewed by: ian, rpaulo (earlier version)
MFC after: 1 week
A new terminal_set_cursor() is added: it wraps the existing
teken_set_cursor() function.
In vtbuf_grow(), the cursor position is adjusted at the end of the
function. In vt_change_font(), we call terminal_set_cursor() just after
terminal_set_winsize_blank(), while the terminal is mute.
This fixes a bug where, after loading a kernel video driver which
increases the terminal window size, the cursor remains at its old
position, in other words, in the middle of the display content.
PR: 194421
MFC after: 1 week
hold the gpiobus lock between the gpio calls.
gpiobus_acquire_lock() now accepts a third parameter which tells gpiobus
what to do when the bus is already busy.
When GPIOBUS_WAIT wait is used, the calling thread will be put to sleep
until the bus became free.
With GPIOBUS_DONTWAIT the calling thread will receive EWOULDBLOCK right
away and then it can act upon.
This fixes the gpioiic(4) locking issues that arises when doing multiple
concurrent access on the bus.
of fuword(9) and suword(9). This makes the functions type-compatible
with volatile objects and does not require devolatile force, e.g. in
kern_umtx.c.
Requested by: bde
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
The check was recommened in the draft-ietf-ngtrans-mech-05.txt. But it isn't
clear, should it compare the source with all direct broadcast addresses in the
system or not.
RFC 4213 says it is enough to verify that the source address is the address
of the encapsulator, as configured on the decapsulator. And this verification
can be extended by administrator with any other forms of IPv4 ingress filtering.
Discussed with: glebius, melifaro
Sponsored by: Yandex LLC
The problem is that the __LINE__ macro is constant inside a macro and
results in identical assert statements when the compiler does not
support the static builtin assert function.
MFC: 3 days
Sponsored by: Mellanox Technologies
appropriately
Assert FILEDESC_XLOCK_ASSERT only for already used tables in fdgrowtable.
We don't have to call it with the lock held if we are just creating new
filedesc.
As a side note, strictly speaking processes can have fdtables with
fd_lastfile = -1, but then they cannot enter fdgrowtable. Very first file
descriptor they get will be 0 and the only syscall allowing to choose fd number
requires an active file descriptor. Should this ever change, we can add an 'init'
(or similar) parameter to fdgrowtable.
While here add 'fdused_init' which does not perform unnecessary work.
Drop FILEDESC_LOCK_ASSERT from fdisused and rely on callers to hold
it when appropriate. This function is only used with INVARIANTS.
No functional changes intended.
Test for file availability by fde_file != NULL instead of fdisused, this is
consistent with similar checks later.
Drop badfileops check. badfileops don't have DFLAG_PASSABLE set, so it was never
reached in practice.
fdiused is now only used in some KASSERTS, so ifdef it under INVARIANTS.
No functional changes.
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
- convert boot1.efi to corrrectly calculate the lba for what the
media reports and convert the size based on what FreeBSD uses.
The existing code would use the 512 byte lba and convert the
size using 4K byte size.
- make fsck_msdosfs read the boot block as 4K so the read doesn't
fail on a 4Kn drive since FreeBSD will error out parition reads
of a block. Make the bpbBytesPerSec check a multiple of 512 since
it can be 512 or 4K depending on the disk. This allows fsck to
pass checking the EFI partition on a 4Kn disk.
To create the EFI file system I used:
newfs_msdos -F 32 -S 4096 -c 1 -m 0xf8 <partition>
This works for booting 512 and 4Kn disks.
Caveat is that loader.efi cannot read the 4Kn EFI partition. This isn't
critical right now since boot1.efi will read loader.efi from the ufs
partition. It looks like loader.efi can be fixed via making some of the
512 bytes reads more flexible. loader.efi doesn't have trouble reading
the ufs partition. This is probably a simple fix.
I now have FreeBSD installed on a system with 4Kn drives and tested the
same code works on 512.
MFC after: 1 week
in the radeonkms driver.
Note: In PCI mode virtual addresses on the graphics card that map to system
RAM are translated to physical addresses by the graphics card itself. In
AGP mode address translation is done by the AGP chipset so fictitious
addresses appear on the system bus. For the CPU cache management to work
correctly when the CPU accesses this memory it needs to use the same
fictitious addresses (and let the chipset translate them) instead of using
the physical addresses directly.
Reviewed by: kib
MFC after: 1 month
When multicast capable interface goes away, it leaves multicast groups,
this leads to generate MLD reports, but MLD code does deffered send and
MLD reports are queued in the in6_multi's in6m_scq ifq. The problem is
that in6_multi structures are freed when interface leaves multicast groups
and thread that does deffered send will not take these queued packets.
PR: 194577
MFC after: 1 week
Sponsored by: Yandex LLC
to mount_nfs(8). They are implemented on Linux, OS X, and Solaris,
and thus can be expected to appear in automounter maps.
Reviewed by: rmacklem@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
without restarting whole lookup
Restart is only needed when fp was closed by current process, which is a much
rarer event than ref/deref by some other thread.
A read barrier was necessary because fd table pointer and table size were
updated separately, opening a window where fget_unlocked could read new size
and old pointer.
This patch puts both these fields into one dedicated structure, pointer to which
is later atomically updated. As such, fget_unlocked only needs data a dependency
barrier which is a noop on all supported architectures.
Reviewed by: kib (previous version)
MFC after: 2 weeks
This makes VMWare VAAI Thin Provisioning Stun primitive activate, pausing
the virtual machine, when backing storage (ZFS pool) is getting overflowed.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
- Move the existing code to x86/x86/identcpu.c since it is x86-specific.
- If the CPUID2_HV flag is set, assume a hypervisor is present and query
the 0x40000000 leaf to determine the hypervisor vendor ID. Export the
vendor ID and the highest supported hypervisor CPUID leaf via
hv_vendor[] and hv_high variables, respectively. The hv_vendor[]
array is also exported via the hw.hv_vendor sysctl.
- Merge the VMWare detection code from tsc.c into the new probe in
identcpu.c. Add a VM_GUEST_VMWARE to identify vmware and use that in
the TSC code to identify VMWare.
Differential Revision: https://reviews.freebsd.org/D1010
Reviewed by: delphij, jkim, neel
unit 0.
It seems that this 'simplification' was copied to all GPIO drivers in tree.
This fix a bug where a GPIO controller could fail to attach its children
(gpioc and gpiobus) if another GPIO driver attach first.
initial MPA exchange must be tracked this way so that t4_tom's state for
the tid is all clean at the time the tid transitions to RDMA mode. Once
it does, t4_tom is out of the way and iw_cxgbe uses the qp endpoints
directly.
Sponsored by: Chelsio Communications
Also fix some mishandling of suword(9) errors as errno, which resulted
in spurious ERESTART.
Sponsored by: The FreeBSD Foundation
Tested by: pho
MFC after: 3 weeks
and casuword(9), but do not mix value read and indication of fault.
I know (or remember) enough assembly to handle x86 and powerpc. For
arm, mips and sparc64, implement fueword() and casueword() as wrappers
around fuword() and casuword(), which means that the functions cannot
distinguish between -1 and fault.
On architectures where fueword() and casueword() are native, implement
fuword() and casuword() using fueword() and casuword(), to reduce
assembly code duplication.
Sponsored by: The FreeBSD Foundation
Tested by: pho
MFC after: 2 weeks (ia64 needs treating)
directly accessed. Although this will work on some platforms, it can
throw an exception if the pointer is invalid and then panic the kernel.
Add a missing SYSCTL_IN() of "SCTP_BASE_STATS" structure.
MFC after: 3 days
Sponsored by: Mellanox Technologies
- Free rt in c4iw_connect only if it is allocated.
- Call soclose instead of so_shutdown if there is an abort from the peer.
- Close socket and return failure if TOE is not enabled.
Submitted by: Hariprasad at Chelsio dot com
Sponsored by: Chelsio Communications
If bootverbose is enabled, a detailed list is provided; otherwise, a
single-line summary is displayed.
Differential Revision: https://reviews.freebsd.org/D1008
Reviewed by: jhb, neel
MFC after: 1 week
transfers to be default. It simplifies porting code which assumes
such settings.
Discussed with: avg, llos, nwhitehorn
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The kernel tracks syscall users so that modules can safely unregister them.
But if the module is not unloadable or was compiled into the kernel, there is
no need to do this.
Achieve this by adding SY_THR_STATIC_KLD macro which expands to SY_THR_STATIC
during kernel build and 0 otherwise.
Reviewed by: kib (previous version)
MFC after: 2 weeks
'struct vm *'. Previously it used to be a 'void *' but there is no reason
to hide the actual type from the handler.
Discussed with: tychon
MFC after: 1 week
This prevents BIO_DELETE requests getting stuck in the TRIM queue which
results in a panic on shutdown due to outstanding requests.
PR: 194606
Reported by: Guido Falsi
Reviewed by: mav
MFC after: 3 days
Sponsored by: Multiplay
Multipass device attachment was tested on many arm platforms by users and
only success was reported on the arm@ mailing list. This is just the
long-delayed followup of making it the default.
Multipass attachment is necessary when using vendor-supplied FDT data,
because our devices may need to be attached in a different order than they
are described in the FDT data.
- 'groups' initialization to NULL is always ovewrwriten before use, so plug it
- get rid of 'goto out'
- kern_setgroups's callers already validate ngrp, so only assert the condition
- ngrp is an u_int, so 'ngrp < 1' is more readable as 'ngrp == 0'
No functional changes.
This reduces variability during timer calibration by keeping the emulation
"close" to the guest. Additionally having all timer emulations in the kernel
will ease the transition to a per-VM clock source (as opposed to using the
host's uptime keep track of time).
Discussed with: grehan
Most I/O port handlers return -1 to signal an error. If this value is returned
without modification to vm_run() then it leads to incorrect behavior because
'-1' is interpreted as ERESTART at the system call level.
Fix this by always returning EIO to signal an error from an I/O port handler.
MFC after: 1 week
crash.sh script attached to FreeNAS bug 4109:
https://bugs.freenas.org/issues/4109
Three are in the snapshot layer:
a) AVG explains in his notes: https://wiki.freebsd.org/AvgVfsSolarisVsFreeBSD
"VOP_INACTIVE must not do any destructive actions to a vnode
and its filesystem node, nor invalidate them in any way."
gfs_vop_inactive and zfsctl_snapshot_inactive did just that. In
OpenSolaris VOP_INACTIVE is much closer to FreeBSD's VOP_RECLAIM.
Rename & move them to gfs_vop_reclaim and zfsctl_snapshot_reclaim
and merge in the requisite vnode_destroy from zfsctl_common_reclaim.
b) gfs_lookup_dot and various zfsctl functions do not honor the
FreeBSD VFS convention of only locking from the root downward. When
looking up ".." the convention is to drop the current leaf vnode lock before
acquiring the directory vnode and then subsequently re-acquiring the lock on the
leaf vnode. This fixes that in all the places that our exercised by crash.sh.
c) The snapshot may already be unmounted when the directory vnode is reclaimed.
Check for this case and return.
One in the common layer:
d) Callers of traverse expect the reference to the vnode passed in to be
maintained. Don't release it.
This last one may be an unclear contract. There may in fact be some callers that
do expect the reference to be dropped on success in addition to callers that
expect it to be released. In this case a further audit of the callers is needed
and a consensus on the correct behavior.
PR: 184677
Submitted by: kmacy
Reviewed by: delphij, will, avg
MFC after: 2 weeks
Sponsored by: iXsystems
and the following r273143 commit, supposed to workaround introduced issue by
quite innocent-looking change.
While there is no clear understanding why, but r273143 is accused in data
corruption in some environments with high I/O load. I personally don't see
any problem in that commit, and possibly it is just a trigger to some other
bug somewhere, but better safe then sorry for now.
Requested by: scottl@
MFC after: 3 days
that sctp_med_chunk_output() always initialized the reason_code
instead of relying on the caller.
The variable is only used for debugging purpose.
This issue was reported by Peter Bostroem from Google.
MFC after: 3 days
used for kernel devices it is used by i2c(8).
This fix the 'error: Device not configured' when i2c(8) tries to reset the
controller, as an example:
# i2c -r
Resetting I2C controller on /dev/iic0: error: Device not configured
For now use conservative settings for default i2c speeds.
MFC after: 1 week
For an unkown reason (at moment), sometimes if_cpsw cannot read from PHY
and fails to attach calling cpsw_detach() which end up in a panic.
Fix it by doing the proper check before detach the miibus and also fix the
leak of few variables.
And to actually make it work, ether_ifattach() has to be moved to the end
of cpsw_attach() to avoid a race where calling ether_ifdetach() before
domain_init() (which will only run later on) would make it crash at
INP_INFO_RLOCK() on in_pcbpurgeif0().
Tested on: BBB (am335x)
MFC after: 1 week
in a separate word from the _count. This does not permit both items to
be updated atomically in a portable manner. As a result, sem_post()
must always perform a system call to safely clear _has_waiters.
This change removes the _has_waiters field and instead uses the high bit
of _count as the _has_waiters flag. A new umtx object type (_usem2) and
two new umtx operations are added (SEM_WAIT2 and SEM_WAKE2) to implement
these semantics. The older operations are still supported under the
COMPAT_FREEBSD9/10 options. The POSIX semaphore API in libc has
been updated to use the new implementation. Note that the new
implementation is not compatible with the previous implementation.
However, this only affects static binaries (which cannot be helped by
symbol versioning). Binaries using a dynamic libc will continue to work
fine. SEM_MAGIC has been bumped so that mismatched binaries will error
rather than corrupting a shared semaphore. In addition, a padding field
has been added to sem_t so that it remains the same size.
Differential Revision: https://reviews.freebsd.org/D961
Reported by: adrian
Reviewed by: kib, jilles (earlier version)
Sponsored by: Norse
It had two bugs: one where mmap was still allowed and another where
D_TRACKCLOSE doesn't handle all cases.
Thanks to jhb and kib for pointing them out.
MFC after: 1 week
the map count and without being able to keep track of the current map
allocation, bus_dma_tag_destroy() will fail to proceed and will return
EBUSY even after all the maps have been correctly destroyed with
bus_dmamap_destroy().
Found while testing the detach method of a NIC.
Tested on: BBB (am335x)
Reviewed by: cognet, ian
MFC after: 1 week
In some cases, TSC is broken and special applications might benefit
from memory mapping HPET and reading the registers to count time.
Most often the main HPET counter is 32-bit only[1], so this only gives
the application a 300 second window based on the default HPET
interval.
Other applications, such as Intel's DPDK, expect /dev/hpet to be
present and use it to count time as well.
Although we have an almost userland version of gettimeofday() which
uses rdtsc in userland, it's not always possible to use it, depending
on how broken the multi-socket hardware is.
Install the acpi_hpet.h so that applications can use the HPET register
definitions.
[1] I haven't found a system where HPET's main counter uses more than
32 bit. There seems to be a discrepancy in the Intel documentation
(claiming it's a 64-bit counter) and the actual implementation (a
32-bit counter in a 64-bit memory area).
MFC after: 1 week
Relnotes: yes
Place the code introduced in r268660 into a separate function that can be
called from uiomove_fromphys. Instead of pre-allocating two KVA pages use
vmem_alloc to allocate them on demand when needed. This prevents blocking if
a page fault is taken while physical addresses from outside the DMAP are
used, since the lock is now removed.
Also introduce a safety catch in PHYS_TO_DMAP and DMAP_TO_PHYS.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D947
amd64/amd64/pmap.c:
- Factor out the code to deal with non DMAP addresses from pmap_copy_pages
and place it in pmap_map_io_transient.
- Change the code to use vmem_alloc instead of a set of pre-allocated
pages.
- Use pmap_qenter and don't pin the thread if there can be page faults.
amd64/amd64/uio_machdep.c:
- Use pmap_map_io_transient in order to correctly deal with physical
addresses not covered by the DMAP.
amd64/include/pmap.h:
- Add the prototypes for the new functions.
amd64/include/vmparam.h:
- Add safety catches to make sure PHYS_TO_DMAP and DMAP_TO_PHYS are only
used with addresses covered by the DMAP.
* Use a constant to define the number of stack frames in a probe exception.
* Only allow function symbols in powerpc64 ('.' prefixed)
* Set the fbtp_roffset for return probes, so the correct dtrace_probe call is
made.
MFC after: 1 week
indiscriminately to printf() and freeenv() is incorrect. Add a NULL
check before freeenv(); as for printf(), we could use req.newptr
instead, but we'd have to select the correct format string based on
the type, and that's too much work for an error message, so just
remove it.
workaround for an imx6 chip erratum. Linux works around the bug with
changes in fdt data that we can't currently handle, so to enable running
with standard vendor-supplied fdt data, this watches for an attempt to map
the gpio1_6 interrupt and remaps it back to the standard ethernet interrupt.
This can be undone when the intrng project is completed and our gpio drivers
can also be interrupt controllers.
search (i.e. without returning any result) and you would end up with a
random MAC address.
Change the search algorithm to a recursive one to ensure that all the nodes
on DTS will be verified.
The previous algorithm could not keep up if the DTS has too many sub-nodes.
While here, fix the punctuation on comments.
To restore the default font using vidcontrol(1), use the "-f" flag
without an argument:
vidcontrol -f < /dev/ttyv0
PR: 193910
Differential Revision: https://reviews.freebsd.org/D971
Submitted by: Marcin Cieslak <saper@saper.info>
Reviewed by: ray@, emaste@
Approved by: ray@
MFC after: 1 week
Support for the multiport feature is mostly implemented, but currently
disabled due to some potential races in the hot plug code paths.
Requested by: marcel
MFC after: 1 month
Relnotes: yes
for, or that are required to run the chip (such as busses). Turn off all
the devices we don't yet have drivers for.
Some day we will have a fully functional imx6 clock driver so that we can
manage clocks based on fdt data. This will have to do until then.
