While the warning is a false positive, it is possible to clarify the code by
always initializing the variable. This does also allow to make the sending
of the "beep" control sequence depend on the validity of its parameters.
I have left the redundant assignment of 0 to the now initialized variables
in place since this makes the code simpler to understand and does not add
any run-time overhead (the compiler completely removes the "else if" test
and the assignments).
There was an embedded literal escape character in a string, which messes up
diplaying the source code on a terminal that interprets ANSI sequences. The
literal escape has been replaced by \e (non-standard, but supported by all
relevant compilers, and already used in other source files in base).
MFC after: 2 weeks
While this is a false positive (a sufficiently large buffer has been
allocated in the line above), the use of strdup() simplifies and clarifies
the code.
MFC after: 2 weeks
Update r343122 to include -ALPHA, -BETA and -RC releases as
upgrade-able via freebsd-update.
PR: 234771
Submitted by: Gerald Aryeetey <aryeeteygerald_rogers.com>
Reported by: delphij, des
Reviewed by: delphij
MFC with: r343122
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18881
Add -p to pwd_mkdb in order to ensure password db changes are also
included in /etc/passwd.
PR: 165954, 232921, 229487
Submitted by: Gerald Aryeetey <aryeeteygerald_rogers.com>
Reviewed by: jilles
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18827
src could potentially be installed under the based dir
and not under the root or vice versa.
PR: 224048
Submitted by: Gerald Aryeetey <aryeeteygerald_rogers.com>
Reviewed by: delphij
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18849
Notify users that upgrading from -CURRENT or -STABLE is unsupported by
freebsd-update.
Also ensure --currently-running provides a correctly formatted release
(as done by -r).
PR: 234771
Submitted by: Gerald Aryeetey <aryeeteygerald_rogers.com>
Reported by: yuri
Reviewed by: bcran
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18803
It fixes a case where eg a 2KB group entry would take several seconds
to complete with cache enabled in nsswitch.conf.
MFC after: 2 weeks
Sponsored by: Chalmers University of Technology
Differential Revision: https://reviews.freebsd.org/D18392
on devices using wear-leveling algorithms as a few weeks passed
after review and discussion of trim(8) ceased and
we still have no utility to perform the job.
Reviewed by: hackers@
MFC after: 2 weeks
while processing not entirely correct jail.conf(5) file
having something like "ip4.addr = 127.0.0.1;" and no "ip4 = ...;"
so extrap variable stays NULL.
Reported by: marck
MFC after: 1 month
will return success when the kernel is built without support of
the capability mode.
It is important to note, that I'm taking a more conservative approach
with these changes and it will be done in small steps.
Reviewed by: jhb
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D18744
shell scripts in base, removes the bogus "copyleft", adds the BeerWare license
header and uses rc.subr(8) new 'enable' keyword for adding entries in
rc.conf(5).
Submitted by: erdgeist <erdgeist@erdgeist.org>
Approved by: bapt
MFC after: 2 weeks
devices like mice, keyboards, bt-audio, ...
This script currently allows scanning for nearby devices, adds one to
/etc/bluetooth/hosts, adds an entry to hcsecd's conf and if it is a HID, add an
entry to bthidd's configs, as well.
Submitted by: erdgeist <erdgeist@erdgeist.org>
Approved by: bapt
MFC after: 2 weeks
Differential Revision: D3778
Reviewers: bapt, emax
non-regular entry.
do_update() skips entries with DT_DIR type. This does not eliminate
other entries that might exist in the directory. More, since NFS
might fill d_type with DT_UNKNOWN, dot and dotdot entries are not
skipped, then mmap(2) call failed for them when update microcode files
are located on NFS.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This change allows to determine power source via sysctl or /dev/apm
when devd(8) is running (used by default).
Based on patch from PR; other changes on top of it:
- '-f' (force) -> '-s' (source) parameter renaming;
- allow 'apm' -> 'devd' transition when '-s devd' is set
(if APM is enabled);
- man page update.
Checked on amd64 with -s devd / sysctl and apm
(an extra build with forced USE_APM define set was done)
PR: 125707
Submitted by: Konstantin Stepanov <milezv@yandex.ru>
Reviewed by: bcr, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18742
These programs parse ND6 Router Advertisement messages; rtsold(8) has
required an SA, SA-14:20.rtsold, for a bug in this code. Thus, they
are good candidates for sandboxing.
The approach taken is to run the main executable in capability mode
and use Casper services to provide functionality that cannot be
implemented within the sandbox. In particular, several custom services
were required.
- A Casper service is used to send Router Solicitation messages on a
raw ICMP6 socket. Initially I took the approach of creating a
socket for each interface upon startup, and connect(2)ing it to
the all-routers multicast group for the interface. This permits
the use of sendmsg(2) in capability mode, but only works if the
interface's link is up when rtsol(d) starts. So, instead, the
rtsold.sendmsg service is used to transmit RS messages on behalf
of the main process. One could alternately define a service
which simply creates and connects a socket for each destination
address, and returns the socket to the sandboxed process. However,
to implement rtsold's -m option we also need to read the ND6 default
router list, and this cannot be done in capability mode.
- rtsold may execute resolvconf(8) in response to RDNSS and DNSSL
options in received RA messages. A Casper service is used to
fork and exec resolvconf(8), and to reap the child process.
- A service is used to determine whether a given interface's
link-local address is useable (i.e., not duplicated or undergoing
DAD). This information is supplied by getifaddrs(3), which reads
a sysctl not available in capability mode. The SIOCGIFCONF socket
ioctl provides equivalent information and can be used in capability
mode, but I decided against it for now because of some limitations
of that interface.
In addition to these new services, cap_syslog(3) is used to send
messages to syslogd.
Reviewed by: oshogbo
Tested by: bz (previous versions)
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17572
The function which processes Admin commands was not returning the
Command Specific value in Completion Queue Entry, Dword 0 (CDW0). This
effects commands such as Set Features, Number of Queues which returns
the number of queues supported by the device in CDW0. In this case, the
host will only create 1 queue pair (Number of Queues is zero based).
This also masked a bug in the queue counting logic.
Reviewed by: imp, araujo
Approved by: imp (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18703
Many size / length parameters in NVMe are "0's based", meaning, a value
of 0x0 represents 1, 0x1 represents 2, etc.. While this leads to an
efficient encoding, it can lead to subtle bugs. With respect to queues,
these parameters include:
- Maximum number of queue entries
- Maximum number of queues
- Number of Completion Queues
- Number of Submission Queues
To be consistent, convert all 0's based values from the host to 1's
based value internally. Likewise, covert internal 1's based values to
0's based values when returned to the host. This fixes an off-by-one bug
when creating IO queues and simplifies some of the code. Note that this
bug is masked by another bug.
While in the neighborhood,
- fix an erroneous queue ID check (checking CQ count when deleting SQ)
- check for queue ID of 0x0 in a few places where this is illegal
- clean up the Set Features, Number of Queues command and check for
illegal values
Reviewed by: imp, araujo
Approved by: imp (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18702
When using a gmirror, entries in /dev can be removed. So instead of using
kern.disks, get the list of disks from "gpart status -sg" instead.
We assume that any 'efi' partition that can't be mounted as msdosfs should
be used as an ESP. However, the ESP on the CD/DVD can't be mounted read-write
and so was being treated as if unformatted. Try the mount as read-only
instead, to catch cases like this.
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18645
Instead of passing the bootnum to each different parameter, require users
to specify -b when running operations that need a bootnum.
This allows activation of a new boot entry at the same time it's created
by adding -a onto the command line.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18648
makes for difficulty with hidden Samba shares; shares with $ at the end
of their name. This enables the use of ${DOLLAR} to work around this.
Reviewed by: bcr (man page)
Approved by: trasz
Differential Revision: https://reviews.freebsd.org/D7048
is specified by its number (index), starting with zero. Previously,
sometimes users would try to literally invoke `acpiconf -i batt' in
their console and become confused as to why this did not work.
Approved by: bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D18659
Quick follow-up to r342362: options can appear multiple times now, so
clean up all of them as needed. For non-OPTIONS options, this has no effect
since they're already de-duplicated.
MFC after: 1 week
X-MFC-With: r342362
config(8)'s option handling has been written to allow duplicate options; if
the value changes, then the latest value is used and an informative message
is printed to stderr like so:
/usr/src/sys/amd64/conf/TEST: option "VERBOSE_SYSINIT" redefined from 0 to 1
Currently, this is only a possibility for cpu types, MAXUSERS, and
MACHINE_ARCH. Anything else duplicated in a config file will use the first
value set and error about duplicated options on subsequent appearances,
which is arguably unfriendly since one could specify:
include GENERIC
nooptions VERBOSE_SYSINIT
options VERBOSE_SYSINIT
to redefine the value later anyways.
Reported by: mmacy
MFC after: 1 week
Currently, the installer uses pre-created 800KB FAT12 filesystems that
it dd's onto the ESP partition.
This changeset improves that by having the installer generate a FAT32
filesystem directly onto the ESP using newfs_msdos and then copying
loader.efi into /EFI/freebsd.
For live installs it then runs efibootmgr to add a FreeBSD boot entry
in the BIOS.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D17947
iBCS2 was disconnected from the build in 2015 (see r291419)
bsdconfig parts submitted by dteske.
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
on bsdinstall(8) and may be non-functional
for system built WITHOUT_BSDINSTALL. (*)
Also, add a check for jails sharing whole tree with host (path=/)
and do not skip it.
Reported by: Andre.Albsmeier@siemens.com (*)
MFC after: 1 week
The removal (and creation of a port) has been pre-announced in UPDATING
1 month ago. Packages are available for all supported FreeBSD vesions.
I did not think that another entry in UPDATING is required to note the
actual removal.
No MFC is planned - CTM shall be kept in base for all releases up to 12.x.
Reviewed by: rgrimes
Approved by: imp, bcr (manpages)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17935
The pwm subsystem consist of API for PWM controllers, pwmbus to register them
and a pwm(8) utility to talk to them from userland.
Reviewed by: oshgobo (capsicum), bcr (manpage), 0mp (manpage)
Differential Revision: https://reviews.freebsd.org/D17938
There was a large refactoring done in CTL to allow multiple ioctl frontend
ports (and respective devices) to be created, particularly for bhyve.
Unfortunately, respective part of bhyve functionality got lost somehow from
the original virtio-scsi commit. This change allows wanted device path to
be specified in either of two ways:
-s 6,virtio-scsi,/dev/cam/ctl1.1
-s 6,virtio-scsi,dev=/dev/cam/ctl2.3
If neither is specified, the default /dev/cam/ctl device is used.
While there, remove per-queue CTL device opening, which makes no sense at
this point.
Reported by: wg
Reviewed by: araujo
MFC after: 3 days
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D18504
- buf_to_iov() does not use buflen parameter, allowing out of bound read.
- buf_to_iov() leaks memory if seek argument > 0.
- iov_to_buf() doesn't need to reallocate buffer for every segment.
- there is no point to use size_t for iov counts, int is more then enough.
- some iov function arguments can be constified.
- pci_vtscsi_request_handle() used truncate_iov() incorrectly, allowing
getting out of buffer and possibly corrupting data.
- pci_vtscsi_controlq_notify() written returned status at wrong offset.
- pci_vtscsi_controlq_notify() leaked one buffer per event.
Reported by: wg
Reviewed by: araujo
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D18465
Unfortunately ctl_scsi_zero_io() wipes that field, so it was always zero.
While there, targ_port is set by kernel, so user-space should not fill it.
MFC after: 1 week
