Commit Graph

132 Commits

Author SHA1 Message Date
Doug Rabson
0b0efca2f4 Don't build ncrcontrol on alpha, its obsoleted by cam. 1998-09-17 08:55:02 +00:00
Doug Rabson
183b47f7bb Add some things to the alpha build. 1998-09-16 09:33:23 +00:00
Poul-Henning Kamp
3f8c45065e (this is an extract from src/share/examples/atm/README)
===================================
                HARP  |  Host ATM Research Platform
                ===================================

                              HARP 3

What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols.  It is intended to
be a high-quality platform for IP/ATM research.

HARP provides a way for IP hosts to connect to ATM networks.  It supports
standard methods of communication using IP over ATM.  A host's standard IP
software sends and receives datagrams via a HARP ATM interface.  HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.

HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM.  HARP is
self-contained; it requires no other licenses or commercial software packages.

HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:

   o IETF ATMARP address resolution client
   o IETF ATMARP address resolution server
   o IETF SCSP/ATMARP server
   o UNI 3.1 and 3.0 signalling protocols
   o Fore Systems's SPANS signalling protocol

What's supported
----------------
The following are supported by HARP 3:

   o ATM Host Interfaces
        - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
        - FORE Systems, Inc. PCA-200E ATM PCI Adapters
        - Efficient Networks, Inc. ENI-155p ATM PCI Adapters

   o ATM Signalling Protocols
        - The ATM Forum UNI 3.1 signalling protocol
        - The ATM Forum UNI 3.0 signalling protocol
        - The ATM Forum ILMI address registration
        - FORE Systems's proprietary SPANS signalling protocol
        - Permanent Virtual Channels (PVCs)

   o IETF "Classical IP and ARP over ATM" model
        - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
        - RFC 1577, "Classical IP and ARP over ATM"
        - RFC 1626, "Default IP MTU for use over ATM AAL5"
        - RFC 1755, "ATM Signaling Support for IP over ATM"
        - RFC 2225, "Classical IP and ARP over ATM"
        - RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
        - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
                "A Distributed ATMARP Service Using SCSP"

   o ATM Sockets interface
        - The file atm-sockets.txt contains further information

What's not supported
--------------------
The following major features of the above list are not currently supported:

        o UNI point-to-multipoint support
        o Driver support for Traffic Control/Quality of Service
        o SPANS multicast and MPP support
        o SPANS signalling using Efficient adapters

This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).

Reviewed (lightly) by:	phk
Submitted by:	Network Computing Services, Inc.
1998-09-15 11:44:44 +00:00
Justin T. Gibbs
f0de228f7a Ncrcontrol is no more. 1998-09-15 10:29:18 +00:00
Robert Nordier
d60dc4ef43 Activate btxld. 1998-09-12 06:58:18 +00:00
Gary Palmer
0451ac36bd Split lines into one subdir per line. 1998-08-30 20:58:16 +00:00
Gary Palmer
971104bfb7 Make pstat machine-independant again 1998-08-30 20:15:09 +00:00
John Birrell
1be40924a9 Build kvm_mkdb and natd on alpha too. 1998-08-20 21:51:35 +00:00
Gary Palmer
67e55fa568 We need config to build on the alpha also ... kinda difficult to build
kernels without it :)
1998-08-17 05:48:22 +00:00
Peter Wemm
943c997663 Descend into makemap/mailstats/praliases when building sendmail. 1998-08-04 15:28:25 +00:00
Robert Nordier
560cbdb57d Drop mkdosfs (replaced by newfs_msdos).
Prompted by: joerg
1998-07-19 13:41:08 +00:00
Dag-Erling Smørgrav
2c8d830407 Add chkgrp 1998-05-24 15:07:04 +00:00
Peter Wemm
d12e99bb93 Add nsupdate 1998-05-03 05:17:28 +00:00
Poul-Henning Kamp
5a85f025f8 In light of the fact that several widespread sendmail alternatives exists
is reason enough to make the compilation & installation of sendmail an
make.conf option.  I know that you hate negative options Bruce.

PR:		6284
Reviewed by:	phk
Submitted by:	Adrian Colley <aecolley@world.std.com>
1998-04-15 16:37:42 +00:00
John Birrell
8d737d4688 A few things won't compile on alpha, so make them i386 specific for
the time being.
1998-03-23 22:21:34 +00:00
Peter Wemm
5021f7402d Initial bmake scaffolding for ipfilter userland stuff.
Obtained from: large chunks stolen from OpenBSD and NetBSD
1998-03-21 13:53:18 +00:00
John Birrell
1a1536c132 Some things only work on i386.
Removed unsupported machines.
1998-03-13 19:43:12 +00:00
Mike Smith
e63dcf46f3 Disconnect (nonexistent) qcamcontrol
Submitted by:	pst
1998-02-18 13:48:37 +00:00
Peter Wemm
e6489fd8e4 add procctl 1997-12-07 02:27:48 +00:00
Warner Losh
c02d44b411 Add missing \ from previous rev to end of a line. 1997-09-20 04:58:08 +00:00
John-Mark Gurney
d737df25ad activate pnpinfo 1997-09-19 15:41:43 +00:00
Paul Traina
f80feb0c50 Enable periodic 1997-08-13 00:58:49 +00:00
Brian Somers
c957ff409a Allow command line control of ppp through both
TCP and AF_LOCAL sockets.
1997-06-28 01:04:54 +00:00
Brian Somers
aac04c621a Hook natd 1997-06-22 04:23:10 +00:00
Bill Paul
636f732d0e Another (harmless, luckily) mind-o: somehow I typed 'rpc.ypupdated.'
instead of 'rpc.ypupdated' when I added rpc.ypupdated to the SUBDIRS
list.

Carved into my forehead with an rusty railroad spike by: Mark Murray
1997-05-29 14:21:39 +00:00
Bill Paul
0e04d559eb Activate new Secure RPC programs. 1997-05-28 16:05:18 +00:00
Mike Smith
6bca557688 Add wlconfig. 1997-05-22 08:59:41 +00:00
Steve Passe
6b178bfd1b added mptable to directory list of usr.sbin programs. 1997-04-29 03:09:01 +00:00
Peter Wemm
f7c9eeddef Kill sup from the main sources now that the ports version is updated.
This puts it on the same footing as cvsup.  It's been suggested on
numerous occasions that I shouldn't have imported it in the first place,
and now that sup has outlived it's usefulness.....  Boom!
1997-03-11 10:52:21 +00:00
Peter Wemm
476602a9d0 Revert $FreeBSD$ to $Id$ 1997-02-22 16:15:28 +00:00
Jordan K. Hubbard
202b8e214b Add ckdist. 1997-01-21 12:59:34 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Bill Fenner
72f54beaca Add mtest. 1996-12-16 01:01:46 +00:00
Jordan K. Hubbard
1b62258da5 Add pw to build list - I need it now. :) 1996-12-09 14:53:36 +00:00
Stefan Eßer
eca55dceed Add pciconf. 1996-10-22 20:58:14 +00:00
Garrett Wollman
322bab890f Disable build of old routed. 1996-09-16 16:53:54 +00:00
Poul-Henning Kamp
cb3c44d787 remove devconf tools from make tree. 1996-09-06 23:07:35 +00:00
Peter Wemm
7e3456fb69 delete bind, add named named.reload named.restart ndc 1996-08-29 22:20:58 +00:00
Peter Wemm
9e639d7d7b Swing the SUBDIR entry across for the new bind-4.9.4-p1 dir.. 1996-08-29 20:15:11 +00:00
Gary Palmer
c3c576e86a Remove eeprom too as more unused stuff.
Pointed out by: Thomas Graichen <graichen@axp5.physik.fu-berlin.de>
1996-07-18 22:26:54 +00:00
Søren Schmidt
5967c90ee7 Add moused to targets. 1996-06-23 12:13:02 +00:00
Garrett Wollman
3c32b88fbf Add keyadmin directory. 1996-06-17 19:49:17 +00:00
Bill Paul
ddc0f71085 Add rpc.ypxfrd. 1996-06-05 05:23:59 +00:00
Poul-Henning Kamp
be09001bc7 Add pccard to makefile system 1996-06-05 04:40:41 +00:00
Jordan K. Hubbard
dbf0824129 ppoll -> yppoll. This Makefile should work better now. :-) 1996-05-08 12:28:23 +00:00
Bill Paul
acec6438af Dohw! Turn on yp_mkdb in the Makefile. 1996-05-07 16:17:45 +00:00
Peter Wemm
d36a01efe4 Oops, add stallion utils to i386 part of Makefile 1996-05-05 07:36:18 +00:00
Peter Wemm
0bb54c2df4 Add rpc.statd and the stub rpc.lockd, as these build and are of some use to
some people.
1996-04-04 03:17:48 +00:00
Garrett Wollman
cbc17e711e XNS sort-of-support is no more. 1996-02-13 17:30:37 +00:00
Bill Paul
89422d4896 Add rpc.yppasswdd 1996-02-12 15:11:59 +00:00