Commit Graph

69 Commits

Author SHA1 Message Date
Alexander V. Chernikov
75b893375f Add support for RFC 6598/Carrier Grade NAT subnets. to libalias and ipfw.
In libalias, a new flag PKT_ALIAS_UNREGISTERED_RFC6598 is added.
 This is like PKT_ALIAS_UNREGISTERED_ONLY, but also is RFC 6598 aware.
Also, we add a new NAT option to ipfw called unreg_cgn, which is like
 unreg_only, but also is RFC 6598-aware.  The reason for the new
 flags/options is to avoid breaking existing networks, especially those
 which rely on RFC 6598 as an external address.

Submitted by:	Neel Chauhan <neel AT neelc DOT org>
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D22877
2020-01-24 20:35:41 +00:00
Andrey V. Elsukov
978f2d1728 Add "tcpmss" opcode to match the TCP MSS value.
With this opcode it is possible to match TCP packets with specified
MSS option, whose value corresponds to configured in opcode value.
It is allowed to specify single value, range of values, or array of
specific values or ranges. E.g.

 # ipfw add deny log tcp from any to any tcpmss 0-500

Reviewed by:	melifaro,bcr
Obtained from:	Yandex LLC
MFC after:	1 week
Sponsored by:	Yandex LLC
2019-06-21 10:54:51 +00:00
Andrey V. Elsukov
09899450ed Remove unused token that was added in r348235.
MFC after:	2 weeks
2019-05-27 06:34:36 +00:00
Andrey V. Elsukov
05ab1ef64e Add missing and or-flush options to "ipfw table <NAME> create"
command to simplify firewall reloading.

The `missing` option suppresses EEXIST error code, but does check that
existing table has the same parameters as new one. The `or-flush` option
implies `missing` option and additionally does flush for table if it
is already exist.

Submitted by:	lev
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D18339
2019-05-24 11:06:24 +00:00
Andrey V. Elsukov
d18c1f26a4 Reapply r345274 with build fixes for 32-bit architectures.
Update NAT64LSN implementation:

  o most of data structures and relations were modified to be able support
    large number of translation states. Now each supported protocol can
    use full ports range. Ports groups now are belongs to IPv4 alias
    addresses, not hosts. Each ports group can keep several states chunks.
    This is controlled with new `states_chunks` config option. States
    chunks allow to have several translation states for single alias address
    and port, but for different destination addresses.
  o by default all hash tables now use jenkins hash.
  o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
  o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
    special prefix "::" value should be used for this purpose when instance
    is created.
  o due to modified internal data structures relations, the socket opcode
    that does states listing was changed.

Obtained from:	Yandex LLC
MFC after:	1 month
Sponsored by:	Yandex LLC
2019-03-19 10:57:03 +00:00
Andrey V. Elsukov
d6369c2d18 Revert r345274. It appears that not all 32-bit architectures have
necessary CK primitives.
2019-03-18 14:00:19 +00:00
Andrey V. Elsukov
d7a1cf06f3 Update NAT64LSN implementation:
o most of data structures and relations were modified to be able support
  large number of translation states. Now each supported protocol can
  use full ports range. Ports groups now are belongs to IPv4 alias
  addresses, not hosts. Each ports group can keep several states chunks.
  This is controlled with new `states_chunks` config option. States
  chunks allow to have several translation states for single alias address
  and port, but for different destination addresses.
o by default all hash tables now use jenkins hash.
o ConcurrencyKit and epoch(9) is used to make NAT64LSN lockless on fast path.
o one NAT64LSN instance now can be used to handle several IPv6 prefixes,
  special prefix "::" value should be used for this purpose when instance
  is created.
o due to modified internal data structures relations, the socket opcode
  that does states listing was changed.

Obtained from:	Yandex LLC
MFC after:	1 month
Sponsored by:	Yandex LLC
2019-03-18 12:59:08 +00:00
Andrey V. Elsukov
5c04f73e07 Add NAT64 CLAT implementation as defined in RFC6877.
CLAT is customer-side translator that algorithmically translates 1:1
private IPv4 addresses to global IPv6 addresses, and vice versa.
It is implemented as part of ipfw_nat64 kernel module. When module
is loaded or compiled into the kernel, it registers "nat64clat" external
action. External action named instance can be created using `create`
command and then used in ipfw rules. The create command accepts two
IPv6 prefixes `plat_prefix` and `clat_prefix`. If plat_prefix is ommitted,
IPv6 NAT64 Well-Known prefix 64:ff9b::/96 will be used.

  # ipfw nat64clat CLAT create clat_prefix SRC_PFX plat_prefix DST_PFX
  # ipfw add nat64clat CLAT ip4 from IPv4_PFX to any out
  # ipfw add nat64clat CLAT ip6 from DST_PFX to SRC_PFX in

Obtained from:	Yandex LLC
Submitted by:	Boris N. Lytochkin
MFC after:	1 month
Relnotes:	yes
Sponsored by:	Yandex LLC
2019-03-18 11:44:53 +00:00
Andrey V. Elsukov
b11efc1eb6 Modify struct nat64_config.
Add second IPv6 prefix to generic config structure and rename another
fields to conform to RFC6877. Now it contains two prefixes and length:
PLAT is provider-side translator that translates N:1 global IPv6 addresses
to global IPv4 addresses. CLAT is customer-side translator (XLAT) that
algorithmically translates 1:1 IPv4 addresses to global IPv6 addresses.
Use PLAT prefix in stateless (nat64stl) and stateful (nat64lsn)
translators.

Modify nat64_extract_ip4() and nat64_embed_ip4() functions to accept
prefix length and use plat_plen to specify prefix length.

Retire net.inet.ip.fw.nat64_allow_private sysctl variable.
Add NAT64_ALLOW_PRIVATE flag and use "allow_private" config option to
configure this ability separately for each NAT64 instance.

Obtained from:	Yandex LLC
MFC after:	1 month
Sponsored by:	Yandex LLC
2019-03-18 10:39:14 +00:00
Andrey V. Elsukov
d66f9c86fa Add ability to request listing and deleting only for dynamic states.
This can be useful, when net.inet.ip.fw.dyn_keep_states is enabled, but
after rules reloading some state must be deleted. Added new flag '-D'
for such purpose.

Retire '-e' flag, since there can not be expired states in the meaning
that this flag historically had.

Also add "verbose" mode for listing of dynamic states, it can be enabled
with '-v' flag and adds additional information to states list. This can
be useful for debugging.

Obtained from:	Yandex LLC
MFC after:	2 months
Sponsored by:	Yandex LLC
2018-12-04 16:12:43 +00:00
Andrey V. Elsukov
b2b5660688 Add ability to use dynamic external prefix in ipfw_nptv6 module.
Now an interface name can be specified for nptv6 instance instead of
ext_prefix. The module will track if_addr_ext events and when suitable
IPv6 address will be added to specified interface, it will be configured
as external prefix. When address disappears instance becomes unusable,
i.e. it doesn't match any packets.

Reviewed by:	0mp (manpages)
Tested by:	Dries Michiels <driesm dot michiels gmail com>
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D17765
2018-11-12 11:20:59 +00:00
Andrey V. Elsukov
f7c4fdee1a Add "record-state", "set-limit" and "defer-action" rule options to ipfw.
"record-state" is similar to "keep-state", but it doesn't produce implicit
O_PROBE_STATE opcode in a rule. "set-limit" is like "limit", but it has the
same feature as "record-state", it is single opcode without implicit
O_PROBE_STATE opcode. "defer-action" is targeted to be used with dynamic
states. When rule with this opcode is matched, the rule's action will
not be executed, instead dynamic state will be created. And when this
state will be matched by "check-state", then rule action will be executed.
This allows create a more complicated rulesets.

Submitted by:	lev
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D1776
2018-07-09 11:35:18 +00:00
Andrey V. Elsukov
782360dec3 Bring in some last changes in NAT64 implementation:
o Modify ipfw(8) to be able set any prefix6 not just Well-Known,
  and also show configured prefix6;
o relocate some definitions and macros into proper place;
o convert nat64_debug and nat64_allow_private variables to be
  VNET-compatible;
o add struct nat64_config that keeps generic configuration needed
  to NAT64 code;
o add nat64_check_prefix6() function to check validness of specified
  by user IPv6 prefix according to RFC6052;
o use nat64_check_private_ip4() and nat64_embed_ip4() functions
  instead of nat64_get_ip4() and nat64_set_ip4() macros. This allows
  to use any configured IPv6 prefixes that are allowed by RFC6052;
o introduce NAT64_WKPFX flag, that is set when IPv6 prefix is
  Well-Known IPv6 prefix. It is used to reduce overhead to check this;
o modify nat64lsn_cfg and nat64stl_cfg structures to use nat64_config
  structure. And respectivelly modify the rest of code;
o remove now unused ro argument from nat64_output() function;
o remove __FreeBSD_version ifdef, NAT64 was not merged to older versions;
o add commented -DIPFIREWALL_NAT64_DIRECT_OUTPUT flag to module's Makefile
  as example.

Obtained from:	Yandex LLC
MFC after:	1 month
Sponsored by:	Yandex LLC
2018-05-09 11:59:24 +00:00
Andrey V. Elsukov
bd32e33552 Remove printing of "not" keyword from print_ip6() function.
After r331668 handling of F_NOT flag done in one place by
print_instruction() function. Also remove unused argument from
print_ip[6]() functions.

MFC after:	1 week
2018-04-12 19:44:04 +00:00
Andrey V. Elsukov
aed0267989 Rework ipfw rules parsing and printing code.
Introduce show_state structure to keep information about printed opcodes.
Split show_static_rule() function into several smaller functions. Make
parsing and printing opcodes into several passes. Each printed opcode
is marked in show_state structure and will be skipped in next passes.
Now show_static_rule() function is simple, it just prints each part
of rule separately: action, modifiers, proto, src and dst addresses,
options. The main goal of this change is avoiding occurrence of wrong
result of `ifpw show` command, that can not be parsed by ipfw(8).
Also now it is possible to make some simple static optimizations
by reordering of opcodes in the rule.

PR:		222705
Discussed with:	melifaro
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2018-03-28 12:44:28 +00:00
Pedro F. Giffuni
33d72c30f1 Revert r327005 - SPDX tags for license similar to BSD-2-Clause.
After consultation with SPDX experts and their matching guidelines[1],
the licensing doesn't exactly match the BSD-2-Clause. It yet remains to be
determined if they are equivalent or if there is a recognized license that
matches but it is safer to just revert the tags.

Let this also be a reminder that on FreeBSD, SPDX tags are only advisory
and have no legal value (but IANAL).

Pointyhat to:	pfg
Thanks to:	Rodney Grimes, Gary O'Neall

[1] https://spdx.org/spdx-license-list/matching-guidelines
2017-12-20 20:25:28 +00:00
Pedro F. Giffuni
d17aef79bb SPDX: These are fundamentally BSD-2-Clause.
They just omit the introductory line and numbering.
2017-12-19 22:40:16 +00:00
Michael Tuexen
665c8a2ee5 Add to ipfw support for sending an SCTP packet containing an ABORT chunk.
This is similar to the TCP case. where a TCP RST segment can be sent.

There is one limitation: When sending an ABORT in response to an incoming
packet, it should be tested if there is no ABORT chunk in the received
packet. Currently, it is only checked if the first chunk is an ABORT
chunk to avoid parsing the whole packet, which could result in a DOS attack.

Thanks to Timo Voelker for helping me to test this patch.
Reviewed by: bcr@ (man page part), ae@ (generic, non-SCTP part)
Differential Revision:	https://reviews.freebsd.org/D13239
2017-11-26 18:19:01 +00:00
Michael Tuexen
ab1d48801b Whitespace changes: Remove leading spaces followed by a tab. 2017-10-02 20:02:25 +00:00
Andrey V. Elsukov
aac74aeac7 Add ipfw_pmod kernel module.
The module is designed for modification of a packets of any protocols.
For now it implements only TCP MSS modification. It adds the external
action handler for "tcp-setmss" action.

A rule with tcp-setmss action does additional check for protocol and
TCP flags. If SYN flag is present, it parses TCP options and modifies
MSS option if its value is greater than configured value in the rule.
Then it adjustes TCP checksum if needed. After handling the search
continues with the next rule.

Obtained from:	Yandex LLC
MFC after:	2 weeks
Relnotes:	yes
Sponsored by:	Yandex LLC
No objection from: #network
Differential Revision:	https://reviews.freebsd.org/D10150
2017-04-03 03:07:48 +00:00
Marius Strobl
6d3c367d9c Fix a bug in r272840; given that the optlen parameter of setsockopt(2)
is a 32-bit socklen_t, do_get3() passes the kernel to access the wrong
32-bit half on big-endian LP64 machines when simply casting the 64-bit
size_t optlen to a socklen_t pointer.
While at it and given that the intention of do_get3() apparently is to
hide/wrap the fact that socket options are used for communication with
ipfw(4), change the optlen parameter of do_set3() to be of type size_t
and as such more appropriate than uintptr_t, too.

MFC after:	3 days
2016-12-28 23:34:28 +00:00
Andrey V. Elsukov
757b5d8792 Add missing support of named lookup tables to the IPv6 code.
PR:		214419
MFC after:	1 week
Sponsored by:	Yandex LLC
2016-11-15 07:13:16 +00:00
Andrey V. Elsukov
d8caf56e9e Add ipfw_nat64 module that implements stateless and stateful NAT64.
The module works together with ipfw(4) and implemented as its external
action module.

Stateless NAT64 registers external action with name nat64stl. This
keyword should be used to create NAT64 instance and to address this
instance in rules. Stateless NAT64 uses two lookup tables with mapped
IPv4->IPv6 and IPv6->IPv4 addresses to perform translation.

A configuration of instance should looks like this:
 1. Create lookup tables:
 # ipfw table T46 create type addr valtype ipv6
 # ipfw table T64 create type addr valtype ipv4
 2. Fill T46 and T64 tables.
 3. Add rule to allow neighbor solicitation and advertisement:
 # ipfw add allow icmp6 from any to any icmp6types 135,136
 4. Create NAT64 instance:
 # ipfw nat64stl NAT create table4 T46 table6 T64
 5. Add rules that matches the traffic:
 # ipfw add nat64stl NAT ip from any to table(T46)
 # ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96
 6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
    via NAT64 host.

Stateful NAT64 registers external action with name nat64lsn. The only
one option required to create nat64lsn instance - prefix4. It defines
the pool of IPv4 addresses used for translation.

A configuration of instance should looks like this:
 1. Add rule to allow neighbor solicitation and advertisement:
 # ipfw add allow icmp6 from any to any icmp6types 135,136
 2. Create NAT64 instance:
 # ipfw nat64lsn NAT create prefix4 A.B.C.D/28
 3. Add rules that matches the traffic:
 # ipfw add nat64lsn NAT ip from any to A.B.C.D/28
 # ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96
 4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
    via NAT64 host.

Obtained from:	Yandex LLC
Relnotes:	yes
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D6434
2016-08-13 16:09:49 +00:00
Andrey V. Elsukov
b867e84e95 Add ipfw_nptv6 module that implements Network Prefix Translation for IPv6
as defined in RFC 6296. The module works together with ipfw(4) and
implemented as its external action module. When it is loaded, it registers
as eaction and can be used in rules. The usage pattern is similar to
ipfw_nat(4). All matched by rule traffic goes to the NPT module.

Reviewed by:	hrs
Obtained from:	Yandex LLC
MFC after:	1 month
Relnotes:	yes
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D6420
2016-07-18 19:46:31 +00:00
Cy Schubert
b04471d88a r302561 broke buildworld. This patch fixes that.
MFC after:	3 days
X-MFC with:	r302561
2016-07-11 13:41:40 +00:00
Don Lewis
91336b403a Import Dummynet AQM version 0.2.1 (CoDel, FQ-CoDel, PIE and FQ-PIE).
Centre for Advanced Internet Architectures

Implementing AQM in FreeBSD

* Overview <http://caia.swin.edu.au/freebsd/aqm/index.html>

* Articles, Papers and Presentations
  <http://caia.swin.edu.au/freebsd/aqm/papers.html>

* Patches and Tools <http://caia.swin.edu.au/freebsd/aqm/downloads.html>

Overview

Recent years have seen a resurgence of interest in better managing
the depth of bottleneck queues in routers, switches and other places
that get congested. Solutions include transport protocol enhancements
at the end-hosts (such as delay-based or hybrid congestion control
schemes) and active queue management (AQM) schemes applied within
bottleneck queues.

The notion of AQM has been around since at least the late 1990s
(e.g. RFC 2309). In recent years the proliferation of oversized
buffers in all sorts of network devices (aka bufferbloat) has
stimulated keen community interest in four new AQM schemes -- CoDel,
FQ-CoDel, PIE and FQ-PIE.

The IETF AQM working group is looking to document these schemes,
and independent implementations are a corner-stone of the IETF's
process for confirming the clarity of publicly available protocol
descriptions. While significant development work on all three schemes
has occured in the Linux kernel, there is very little in FreeBSD.

Project Goals

This project began in late 2015, and aims to design and implement
functionally-correct versions of CoDel, FQ-CoDel, PIE and FQ_PIE
in FreeBSD (with code BSD-licensed as much as practical). We have
chosen to do this as extensions to FreeBSD's ipfw/dummynet firewall
and traffic shaper. Implementation of these AQM schemes in FreeBSD
will:
* Demonstrate whether the publicly available documentation is
  sufficient to enable independent, functionally equivalent implementations

* Provide a broader suite of AQM options for sections the networking
  community that rely on FreeBSD platforms

Program Members:

* Rasool Al Saadi (developer)

* Grenville Armitage (project lead)

Acknowledgements:

This project has been made possible in part by a gift from the
Comcast Innovation Fund.

Submitted by:	Rasool Al-Saadi <ralsaadi@swin.edu.au>
X-No objection:	core
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D6388
2016-05-26 21:40:13 +00:00
Andrey V. Elsukov
2acdf79f53 Add External Actions KPI to ipfw(9).
It allows implementing loadable kernel modules with new actions and
without needing to modify kernel headers and ipfw(8). The module
registers its action handler and keyword string, that will be used
as action name. Using generic syntax user can add rules with this
action. Also ipfw(8) can be easily modified to extend basic syntax
for external actions, that become a part base system.
Sample modules will coming soon.

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2016-04-14 22:51:23 +00:00
Andrey V. Elsukov
7b34dbe450 Fix output formatting of O_UNREACH6 opcode.
Obtained from:	Yandex LLC
2016-04-14 18:22:08 +00:00
Andrey V. Elsukov
5dc5a0e0aa Implement ipfw internal olist command to list named objects.
Reviewed by:	melifaro
Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2015-11-03 10:21:53 +00:00
Alexander V. Chernikov
8963c5055d Generalize object reference handling in ipfw rules.
No ABI changes.
2015-04-26 10:53:35 +00:00
Alexander V. Chernikov
0cba2b2802 Add support for multi-field values inside ipfw tables.
This is the last major change in given branch.

Kernel changes:
* Use 64-bytes structures to hold multi-value variables.
* Use shared array to hold values from all tables (assume
  each table algo is capable of holding 32-byte variables).
* Add some placeholders to support per-table value arrays in future.
* Use simple eventhandler-style API to ease the process of adding new
  table items. Currently table addition may required multiple UH drops/
  acquires which is quite tricky due to atomic table modificatio/swap
  support, shared array resize, etc. Deal with it by calling special
  notifier capable of rolling back state before actually performing
  swap/resize operations. Original operation then restarts itself after
  acquiring UH lock.
* Bump all objhash users default values to at least 64
* Fix custom hashing inside objhash.

Userland changes:
* Add support for dumping shared value array via "vlist" internal cmd.
* Some small print/fill_flags dixes to support u32 values.
* valtype is now bitmask of
  <skipto|pipe|fib|nat|dscp|tag|divert|netgraph|limit|ipv4|ipv6>.
  New values can hold distinct values for each of this types.
* Provide special "legacy" type which assumes all values are the same.
* More helpers/docs following..

Some examples:

3:41 [1] zfscurr0# ipfw table mimimi create valtype skipto,limit,ipv4,ipv6
3:41 [1] zfscurr0# ipfw table mimimi info
+++ table(mimimi), set(0) +++
 kindex: 2, type: addr
 references: 0, valtype: skipto,limit,ipv4,ipv6
 algorithm: addr:radix
 items: 0, size: 296
3:42 [1] zfscurr0# ipfw table mimimi add 10.0.0.5 3000,10,10.0.0.1,2a02:978:2::1
added: 10.0.0.5/32 3000,10,10.0.0.1,2a02:978:2::1
3:42 [1] zfscurr0# ipfw table mimimi list
+++ table(mimimi), set(0) +++
10.0.0.5/32 3000,0,10.0.0.1,2a02:978:2::1
2014-08-31 23:51:09 +00:00
Alexander V. Chernikov
4df4dada8f Move one step further towards libipfw: convert show_static_rule() to
bpprint-output style, so one can now output human-readable rule
representation to preallocated buffer.
2014-08-12 19:56:26 +00:00
Alexander V. Chernikov
be695df9c3 * Update table_handler cmd list
* Implement partial cmd matching inside table handler.
2014-08-12 18:02:10 +00:00
Alexander V. Chernikov
1940fa7727 Change tablearg value to be 0 (try #2).
Most of the tablearg-supported opcodes does not accept 0 as valid value:
 O_TAG, O_TAGGED, O_PIPE, O_QUEUE, O_DIVERT, O_TEE, O_SKIPTO, O_CALLRET,
 O_NETGRAPH, O_NGTEE, O_NAT treats 0 as invalid input.

The rest are O_SETDSCP and O_SETFIB.
'Fix' them by adding high-order bit (0x8000) set for non-tablearg values.
Do translation in kernel for old clients (import_rule0 / export_rule0),
teach current ipfw(8) binary to add/remove given bit.

This change does not affect handling SETDSCP values, but limit
O_SETFIB values to 32767 instead of 65k. Since currently we have either
old (16) or new (2^32) max fibs, this should not be a big deal:
we're definitely OK for former and have to add another opcode to deal
with latter, regardless of tablearg value.
2014-08-12 15:51:48 +00:00
Alexander V. Chernikov
4f43138ade * Add the abilify to lock/unlock given table from changes.
Example:

# ipfw table si lock
# ipfw table si info
+++ table(si), set(0) +++
 kindex: 0, type: cidr, locked
 valtype: number, references: 0
 algorithm: cidr:radix
 items: 0, size: 288
# ipfw table si add 4.5.6.7
ignored: 4.5.6.7/32 0
ipfw: Adding record failed: table is locked
# ipfw table si unlock
# ipfw table si add 4.5.6.7
added: 4.5.6.7/32 0
# ipfw table si lock
# ipfw table si delete 4.5.6.7
ignored: 4.5.6.7/32 0
ipfw: Deleting record failed: table is locked
# ipfw table si unlock
# ipfw table si delete 4.5.6.7
deleted: 4.5.6.7/32 0
2014-08-11 18:09:37 +00:00
Alexander V. Chernikov
3a845e1076 * Add support for batched add/delete for ipfw tables
* Add support for atomic batches add (all or none).
* Fix panic on deleting non-existing entry in radix algo.

Examples:

# si is empty
# ipfw table si add 1.1.1.1/32 1111 2.2.2.2/32 2222
added: 1.1.1.1/32 1111
added: 2.2.2.2/32 2222
# ipfw table si add 2.2.2.2/32 2200 4.4.4.4/32 4444
exists: 2.2.2.2/32 2200
added: 4.4.4.4/32 4444
ipfw: Adding record failed: record already exists
^^^^^ Returns error but keeps inserted items
# ipfw table si list
+++ table(si), set(0) +++
1.1.1.1/32 1111
2.2.2.2/32 2222
4.4.4.4/32 4444
# ipfw table si atomic add 3.3.3.3/32 3333 4.4.4.4/32 4400 5.5.5.5/32 5555
added(reverted): 3.3.3.3/32 3333
exists: 4.4.4.4/32 4400
ignored: 5.5.5.5/32 5555
ipfw: Adding record failed: record already exists
^^^^^ Returns error and reverts added records
# ipfw table si list
+++ table(si), set(0) +++
1.1.1.1/32 1111
2.2.2.2/32 2222
4.4.4.4/32 4444
2014-08-11 17:34:25 +00:00
Alexander V. Chernikov
adf3b2b9d8 * Add IP_FW_TABLE_XMODIFY opcode
* Since there seems to be lack of consensus on strict value typing,
  remove non-default value types. Use userland-only "value format type"
  to print values.

Kernel changes:
* Add IP_FW_XMODIFY to permit table run-time modifications.
  Currently we support changing limit and value format type.

Userland changes:
* Support IP_FW_XMODIFY opcode.
* Support specifying value format type (ftype) in tablble create/modify req
* Fine-print value type/value format type.
2014-08-08 09:27:49 +00:00
Alexander V. Chernikov
46d5200874 Implement atomic ipfw table swap.
Kernel changes:
* Add opcode IP_FW_TABLE_XSWAP
* Add support for swapping 2 tables with the same type/ftype/vtype.
* Make skipto cache init after ipfw locks init.

Userland changes:
* Add "table X swap Y" command.
2014-08-03 21:37:12 +00:00
Alexander V. Chernikov
358b9d09ed * Move "talist" and "iflist" cmds into newly-create "internal" ipfw(8) cmd.
* Add "table X detail" cmd and show detailed algo info there instead
  of "info".
2014-08-03 16:22:14 +00:00
Alexander V. Chernikov
4c0c07a552 * Permit limiting number of items in table.
Kernel changes:
* Add TEI_FLAGS_DONTADD entry flag to indicate that insert is not possible
* Support given flag in all algorithms
* Add "limit" field to ipfw_xtable_info
* Add actual limiting code into add_table_entry()

Userland changes:
* Add "limit" option as "create" table sub-option. Limit modification
  is currently impossible.
* Print human-readable errors in table enry addition/deletion code.
2014-08-01 15:17:46 +00:00
Alexander V. Chernikov
914bffb6ab * Add new "flow" table type to support N=1..5-tuple lookups
* Add "flow:hash" algorithm

Kernel changes:
* Add O_IP_FLOW_LOOKUP opcode to support "flow" lookups
* Add IPFW_TABLE_FLOW table type
* Add "struct tflow_entry" as strage for 6-tuple flows
* Add "flow:hash" algorithm. Basically it is auto-growing chained hash table.
  Additionally, we store mask of fields we need to compare in each instance/

* Increase ipfw_obj_tentry size by adding struct tflow_entry
* Add per-algorithm stat (ifpw_ta_tinfo) to ipfw_xtable_info
* Increase algoname length: 32 -> 64 (algo options passed there as string)
* Assume every table type can be customized by flags, use u8 to store "tflags" field.
* Simplify ipfw_find_table_entry() by providing @tentry directly to algo callback.
* Fix bug in cidr:chash resize procedure.

Userland changes:
* add "flow table(NAME)" syntax to support n-tuple checking tables.
* make fill_flags() separate function to ease working with _s_x arrays
* change "table info" output to reflect longer "type" fields

Syntax:
ipfw table fl2 create type flow:[src-ip][,proto][,src-port][,dst-ip][dst-port] [algo flow:hash]

Examples:

0:02 [2] zfscurr0# ipfw table fl2 create type flow:src-ip,proto,dst-port algo flow:hash
0:02 [2] zfscurr0# ipfw table fl2 info
+++ table(fl2), set(0) +++
 kindex: 0, type: flow:src-ip,proto,dst-port
 valtype: number, references: 0
 algorithm: flow:hash
 items: 0, size: 280
0:02 [2] zfscurr0# ipfw table fl2 add 2a02:6b8::333,tcp,443 45000
0:02 [2] zfscurr0# ipfw table fl2 add 10.0.0.92,tcp,80 22000
0:02 [2] zfscurr0# ipfw table fl2 list
+++ table(fl2), set(0) +++
2a02:6b8::333,6,443 45000
10.0.0.92,6,80 22000
0:02 [2] zfscurr0# ipfw add 200 count tcp from me to 78.46.89.105 80 flow 'table(fl2)'
00200 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
0:03 [2] zfscurr0# ipfw show
00200   0     0 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
65535 617 59416 allow ip from any to any
0:03 [2] zfscurr0# telnet -s 10.0.0.92 78.46.89.105 80
Trying 78.46.89.105...
..
0:04 [2] zfscurr0# ipfw show
00200   5   272 count tcp from me to 78.46.89.105 dst-port 80 flow table(fl2)
65535 682 66733 allow ip from any to any
2014-07-31 20:08:19 +00:00
Alexander V. Chernikov
9d099b4f38 * Dump available table algorithms via "ipfw talist" cmd.
Kernel changes:
* Add type/refcount fields to table algo instances.
* Add IP_FW_TABLES_ALIST opcode to export available algorihms to userland.

Userland changes:
* Fix cores on empty input inside "ipfw table" handler.
* Add "ipfw talist" cmd to print availabled kernel algorithms.
* Change "table info" output to reflect long algorithm config lines.
2014-07-29 22:44:26 +00:00
Alexander V. Chernikov
68394ec88e * Add generic ipfw interface tracking API
* Rewrite interface tables to use interface indexes

Kernel changes:
* Add generic interface tracking API:
 - ipfw_iface_ref (must call unlocked, performs lazy init if needed, allocates
  state & bumps ref)
 - ipfw_iface_add_ntfy(UH_WLOCK+WLOCK, links comsumer & runs its callback to
  update ifindex)
 - ipfw_iface_del_ntfy(UH_WLOCK+WLOCK, unlinks consumer)
 - ipfw_iface_unref(unlocked, drops reference)
Additionally, consumer callbacks are called in interface withdrawal/departure.

* Rewrite interface tables to use iface tracking API. Currently tables are
  implemented the following way:
  runtime data is stored as sorted array of {ifidx, val} for existing interfaces
  full data is stored inside namedobj instance (chained hashed table).

* Add IP_FW_XIFLIST opcode to dump status of tracked interfaces

* Pass @chain ptr to most non-locked algorithm callbacks:
  (prepare_add, prepare_del, flush_entry ..). This may be needed for better
  interaction of given algorithm an other ipfw subsystems

* Add optional "change_ti" algorithm handler to permit updating of
  cached table_info pointer (happens in case of table_max resize)

* Fix small bug in ipfw_list_tables()
* Add badd (insert into sorted array) and bdel (remove from sorted array) funcs

Userland changes:
* Add "iflist" cmd to print status of currently tracked interface
* Add stringnum_cmp for better interface/table names sorting
2014-07-28 19:01:25 +00:00
Alexander V. Chernikov
ac35ff1784 Fully switch to named tables:
Kernel changes:
* Introduce ipfw_obj_tentry table entry structure to force u64 alignment.
* Support "update-on-existing-key" "add" bahavior (TEI_FLAGS_UPDATED).
* Use "subtype" field to distingush between IPv4 and IPv6 table records
  instead of previous hack.
* Add value type (vtype) field for kernel tables. Current types are
  number,ip and dscp
* Fix sets mask retrieval for old binaries
* Fix crash while using interface tables

Userland changes:
* Switch ipfw_table_handler() to use named-only tables.
* Add "table NAME create [type {cidr|iface|u32} [valtype {number|ip|dscp}] ..."
* Switch ipfw_table_handler to match_token()-based parser.
* Switch ipfw_sets_handler to use new ipfw_get_config() for mask  retrieval.
* Allow ipfw set X table ... syntax to permit using per-set table namespaces.
2014-07-03 22:25:59 +00:00
Alexander V. Chernikov
6c2997ffec * Add new IP_FW_XADD opcode which permits to
a) specify table ids as names
  b) add multiple rules at once.
Partially convert current code for atomic addition of multiple rules.
2014-06-29 22:35:47 +00:00
Alexander V. Chernikov
563b5ab132 Suppord showing named tables in ipfw(8) rule listing.
Kernel changes:
* change base TLV header to be u64 (so size can be u32).
* Introduce ipfw_obj_ctlv generc container TLV.
* Add IP_FW_XGET opcode which is now used for atomic configuration
  retrieval. One can specify needed configuration pieces to retrieve
  via flags field. Currently supported are
  IPFW_CFG_GET_STATIC (static rules) and
  IPFW_CFG_GET_STATES (dynamic states).
  Other configuration pieces (tables, pipes, etc..) support is planned.

Userland changes:
* Switch ipfw(8) to use new IP_FW_XGET for rule listing.
* Split rule listing code get and show pieces.
* Make several steps forward towards libipfw:
  permit printing states and rules(paritally) to supplied buffer.
  do not die on malloc/kernel failure inside given printing functions.
  stop assuming cmdline_opts is global symbol.
2014-06-28 23:20:24 +00:00
Alexander V. Chernikov
f1220db8d7 Move further to eliminate next pieces of number-assuming code inside tables.
Kernel changes:
* Add IP_FW_OBJ_FLUSH opcode (flush table based on its name/set)
* Add IP_FW_OBJ_DUMP opcode (dumps table data based on its names/set)
* Add IP_FW_OBJ_LISTSIZE / IP_FW_OBJ_LIST opcodes (get list of kernel tables)

Userland changes:
* move tables code to separate tables.c file
* get rid of tables_max
* switch "all"/list handling to new opcodes
2014-06-14 22:47:25 +00:00
Hiren Panchasara
fc5e1956d9 ECN marking implenetation for dummynet.
Changes include both DCTCP and RFC 3168 ECN marking methodology.

DCTCP draft: http://tools.ietf.org/html/draft-bensley-tcpm-dctcp-00

Submitted by:	Midori Kato (aoimidori27@gmail.com)
Worked with:	Lars Eggert (lars@netapp.com)
Reviewed by:	luigi, hiren
2014-06-01 07:28:24 +00:00
Gleb Smirnoff
9968f056d6 Fix world build WITHOUT_PF.
Sponsored by:	Nginx, Inc.
2014-02-12 09:59:48 +00:00
Alexander V. Chernikov
1058f17749 Check ipfw table numbers in both user and kernel space before rule addition.
Found by:	Saychik Pavel <umka@localka.net>
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2013-11-28 10:28:28 +00:00