Commit Graph

60 Commits

Author SHA1 Message Date
Conrad Meyer
db4fcadf52 "Buses" is the preferred plural of "bus"
Replace archaic "busses" with modern form "buses."

Intentionally excluded:
* Old/random drivers I didn't recognize
  * Old hardware in general
* Use of "busses" in code as identifiers

No functional change.

http://grammarist.com/spelling/buses-busses/

PR:		216099
Reported by:	bltsrc at mail.ru
Sponsored by:	Dell EMC Isilon
2017-01-15 17:54:01 +00:00
Michal Meloun
895c8b1c39 INTRNG: Rework handling with resources. Partially revert r301453.
- Read interrupt properties at bus enumeration time and store
   it into global mapping table.
 - At bus_activate_resource() time, given mapping entry is resolved and
   connected to real interrupt source. A copy of mapping entry is attached
   to given resource.
 - At bus_setup_intr() time, mapping entry stored in resource is used
   for delivery of requested interrupt configuration.
 - For MSI/MSIX interrupts, mapping entry is created within
   pci_alloc_msi()/pci_alloc_msix() call.
 - For legacy PCI interrupts, mapping entry must be created within
   pcib_route_interrupt() by pcib driver itself.

Reviewed by: nwhitehorn, andrew
Differential Revision: https://reviews.freebsd.org/D7493
2016-08-19 10:52:39 +00:00
Svatopluk Kraus
0869297dd9 (1) Add a new bus method to get a mapping data for an interrupt.
BUS_MAP_INTR() is used to get an interrupt mapping data according
to provided hints. The hints could be modified afterwards, but only
if mapping data was allocated. This method is intended to be called
before BUS_ALLOC_RESOURCE().

An interrupt mapping data describes an interrupt - hardware number,
type, configuration, cpu binding, and whatever is needed to setup it.

(2) Introduce a method which allows storing of an additional data
in struct resource to be available for bus drivers. This method is
convenient in two ways:
 - there is no need to rework existing bus drivers as they can simply
   be extended to provide an additional data,
 - there is no need to modify any existing bus methods as struct
   resource is already passed to them as argument and thus stored data
   is simply accessible by other bus drivers.
For now, implement this method only for INTRNG.

This is motivated by needs of modern SOCs where hardware initialization
is not straightforward and resources descriptions are complex, opaque
for everyone but provider, and may vary from SOC to SOC. Typical
situation is that one bus driver can fetch a resource description for
its child device, but it's opaque for this driver. Another bus driver
knows a provider for this kind of resource and can pass this resource
description to it. In fact, something like device IVARS would be
perfect for that if implemented generally enough. Unfortunatelly, IVARS
are usable only by their owners now. Only owner knows its IVARS layout,
thus other bus drivers are not able to use them.

Differential Revision:	https://reviews.freebsd.org/D6632
2016-06-05 16:07:57 +00:00
John Baldwin
cc981af204 Add new bus methods for mapping resources.
Add a pair of bus methods that can be used to "map" resources for direct
CPU access using bus_space(9).  bus_map_resource() creates a mapping and
bus_unmap_resource() releases a previously created mapping.  Mappings are
described by 'struct resource_map' object.  Pointers to these objects can
be passed as the first argument to the bus_space wrapper API used for bus
resources.

Drivers that wish to map all of a resource using default settings
(for example, using uncacheable memory attributes) do not need to change.
However, drivers that wish to use non-default settings can now do so
without jumping through hoops.

First, an RF_UNMAPPED flag is added to request that a resource is not
implicitly mapped with the default settings when it is activated.  This
permits other activation steps (such as enabling I/O or memory decoding
in a device's PCI command register) to be taken without creating a
mapping.  Right now the AGP drivers don't set RF_ACTIVE to avoid using
up a large amount of KVA to map the AGP aperture on 32-bit platforms.
Once RF_UNMAPPED is supported on all platforms that support AGP this
can be changed to using RF_UNMAPPED with RF_ACTIVE instead.

Second, bus_map_resource accepts an optional structure that defines
additional settings for a given mapping.

For example, a driver can now request to map only a subset of a resource
instead of the entire range.  The AGP driver could also use this to only
map the first page of the aperture (IIRC, it calls pmap_mapdev() directly
to map the first page currently).  I will also eventually change the
PCI-PCI bridge driver to request mappings of the subset of the I/O window
resource on its parent side to create mappings for child devices rather
than passing child resources directly up to nexus to be mapped.  This
also permits bridges that do address translation to request suitable
mappings from a resource on the "upper" side of the bus when mapping
resources on the "lower" side of the bus.

Another attribute that can be specified is an alternate memory attribute
for memory-mapped resources.  This can be used to request a
Write-Combining mapping of a PCI BAR in an MI fashion.  (Currently the
drivers that do this call pmap_change_attr() directly for x86 only.)

Note that this commit only adds the MI framework.  Each platform needs
to add support for handling RF_UNMAPPED and thew new
bus_map/unmap_resource methods.  Generally speaking, any drivers that
are calling rman_set_bustag() and rman_set_bushandle() need to be
updated.

Discussed on:	arch
Reviewed by:	cem
Differential Revision:	https://reviews.freebsd.org/D5237
2016-05-20 17:57:47 +00:00
Ravi Pokala
08907ec39d Fix misleading comments in bus_if.m
While looking at r300073, I noticed these incorrect comments in the context
of the diff.

Reviewed by:	imp, jhb
Differential Revision:	https://reviews.freebsd.org/D6431
2016-05-18 16:25:34 +00:00
John Baldwin
ed7ed7f0ca Document the formatting requirements of location and pnpinfo strings.
devd requires location and pnpinfo strings generated by bus drivers
to be formatted as a list of name=value keypairs.  Non-conforming
bus drivers cause devd to mis-parse device events for these buses.

Note that this documents the desired requirements.  devctl_safe_quote()
doesn't yet escape backslash characters, and devd doesn't handle escaped
characters in quoted values.

Differential Revision:	https://reviews.freebsd.org/D6252
2016-05-17 19:34:07 +00:00
John Baldwin
8d791e5af1 Add a new bus method to fetch device-specific CPU sets.
bus_get_cpus() returns a specified set of CPUs for a device.  It accepts
an enum for the second parameter that indicates the type of cpuset to
request.  Currently two valus are supported:

 - LOCAL_CPUS (on x86 this returns all the CPUs in the package closest to
   the device when DEVICE_NUMA is enabled)
 - INTR_CPUS (like LOCAL_CPUS but only returns 1 SMT thread for each core)

For systems that do not support NUMA (or if it is not enabled in the kernel
config), LOCAL_CPUS fails with EINVAL.  INTR_CPUS is mapped to 'all_cpus'
by default.  The idea is that INTR_CPUS should always return a valid set.

Device drivers which want to use per-CPU interrupts should start using
INTR_CPUS instead of simply assigning interrupts to all available CPUs.
In the future we may wish to add tunables to control the policy of
INTR_CPUS (e.g. should it be local-only or global, should it ignore
SMT threads or not).

The x86 nexus driver exposes the internal set of interrupt CPUs from the
the x86 interrupt code via INTR_CPUS.

The ACPI bus driver and PCI bridge drivers use _PXM to return a suitable
LOCAL_CPUS set when _PXM exists and DEVICE_NUMA is enabled.  They also and
the global INTR_CPUS set from the nexus driver with the per-domain set from
_PXM to generate a local INTR_CPUS set for child devices.

Compared to the r298933, this version uses 'struct _cpuset' in
<sys/bus.h> instead of 'cpuset_t' to avoid requiring <sys/param.h>
(<sys/_cpuset.h> still requires <sys/param.h> for MAXCPU even though
<sys/_bitset.h> does not after recent changes).
2016-05-09 20:50:21 +00:00
John Baldwin
8a08b7d36b Revert bus_get_cpus() for now.
I really thought I had run this through the tinderbox before committing,
but many places need <sys/types.h> -> <sys/param.h> for <sys/bus.h> now.
2016-05-03 01:17:40 +00:00
John Baldwin
bc153c692f Add a new bus method to fetch device-specific CPU sets.
bus_get_cpus() returns a specified set of CPUs for a device.  It accepts
an enum for the second parameter that indicates the type of cpuset to
request.  Currently two valus are supported:

 - LOCAL_CPUS (on x86 this returns all the CPUs in the package closest to
   the device when DEVICE_NUMA is enabled)
 - INTR_CPUS (like LOCAL_CPUS but only returns 1 SMT thread for each core)

For systems that do not support NUMA (or if it is not enabled in the kernel
config), LOCAL_CPUS fails with EINVAL.  INTR_CPUS is mapped to 'all_cpus'
by default.  The idea is that INTR_CPUS should always return a valid set.

Device drivers which want to use per-CPU interrupts should start using
INTR_CPUS instead of simply assigning interrupts to all available CPUs.
In the future we may wish to add tunables to control the policy of
INTR_CPUS (e.g. should it be local-only or global, should it ignore
SMT threads or not).

The x86 nexus driver exposes the internal set of interrupt CPUs from the
the x86 interrupt code via INTR_CPUS.

The ACPI bus driver and PCI bridge drivers use _PXM to return a suitable
LOCAL_CPUS set when _PXM exists and DEVICE_NUMA is enabled.  They also and
the global INTR_CPUS set from the nexus driver with the per-domain set from
_PXM to generate a local INTR_CPUS set for child devices.

Reviewed by:	wblock (manpage)
Differential Revision:	https://reviews.freebsd.org/D5519
2016-05-02 18:00:38 +00:00
Pedro F. Giffuni
e3043798aa sys/kern: spelling fixes in comments.
No functional change.
2016-04-29 22:15:33 +00:00
John Baldwin
a907c6914c Add a new rescan method to the bus interface.
The BUS_RESCAN() method rescans a single bus device checking for devices
that have been added or removed from the bus.  A new 'rescan' command is
added to devctl(8) to trigger a rescan.

Differential Revision:	https://reviews.freebsd.org/D6016
2016-04-27 16:29:03 +00:00
Justin Hibbits
534ccd7bbf Replace all resource occurrences of '0UL/~0UL' with '0/~0'.
Summary:
The idea behind this is '~0ul' is well-defined, and casting to uintmax_t, on a
32-bit platform, will leave the upper 32 bits as 0.  The maximum range of a
resource is 0xFFF.... (all bits of the full type set).  By dropping the 'ul'
suffix, C type promotion rules apply, and the sign extension of ~0 on 32 bit
platforms gets it to a type-independent 'unsigned max'.

Reviewed By: cem
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5255
2016-03-03 05:07:35 +00:00
Zbigniew Bodek
b998c9656b Introduce bus_get_bus_tag() method
Provide bus_get_bus_tag() for sparc64, powerpc, arm, arm64 and mips
nexus and its children in order to return a platform specific default tag.

This is required to ensure generic correctness of the bus_space tag.
It is especially needed for arches where child bus tag does not match
the parent bus tag. This solves the problem with ppc architecture
where the PCI bus tag differs from parent bus tag which is big-endian.

This commit is a part of the following patch:
https://reviews.freebsd.org/D4879

Submitted by:  Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Sponsored by:  Annapurna Labs
Reviewed by:   jhibbits, mmel
Differential Revision: https://reviews.freebsd.org/D4879
2016-02-18 13:00:04 +00:00
Justin Hibbits
2dd1bdf183 Convert rman to use rman_res_t instead of u_long
Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources.  For
now, this is still compatible with u_long.

This is step one in migrating rman to use uintmax_t for resources instead of
u_long.

Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.

This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.

Reviewed By: jhb
Sponsored by:	Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075
2016-01-27 02:23:54 +00:00
Warner Losh
83a283cf62 Add a note to the effect that BUS_ADD_CHILD calls
device_add_child_ordered to add the child. device_add_child_ordered
doesn't call BUS_ADD_CHILD.
2015-10-28 18:53:18 +00:00
Adrian Chadd
ffcf962dab Add a bus method to fetch the VM domain for the given device/bus.
* Add a bus_if.m method - get_domain() - returning the VM domain or
  ENOENT if the device isn't in a VM domain;
* Add bus methods to print out the domain of the device if appropriate;
* Add code in srat.c to save the PXM -> VM domain mapping that's done and
  expose a function to translate VM domain -> PXM;
* Add ACPI and ACPI PCI methods to check if the bus has a _PXM attribute
  and if so map it to the VM domain;
* (.. yes, this works recursively.)
* Have the pci bus glue print out the device VM domain if present.

Note: this is just the plumbing to start enumerating information -
it doesn't at all modify behaviour.

Differential Revision:	D906
Reviewed by:	jhb
Sponsored by:	Norse Corp
2014-10-09 05:33:25 +00:00
Justin Hibbits
a1c1634858 Stage one of multipass suspend/resume
Summary:
Add the beginnings of multipass suspend/resume, by introducing
BUS_SUSPEND_CHILD/BUS_RESUME_CHILD, and move the PCI driver to this.

Reviewers: jhb

Reviewed By: jhb

Differential Revision: https://reviews.freebsd.org/D590
2014-09-23 02:56:40 +00:00
John Baldwin
6f7d0018b0 Add a BUS_CHILD_DELETED() method that a bus can hook to allow it to cleanup
any bus-specific state (such as ivars) when a child device is deleted.

Requested by:	kan
MFC after:	1 month
2012-08-21 18:13:09 +00:00
John Baldwin
85ee63c923 Add a new bus method, BUS_ADJUST_RESOURCE() that is intended to be a
wrapper around rman_adjust_resource().  Include a generic implementation,
bus_generic_adjust_resource() which passes the request up to the parent
bus.  There is currently no default implementation.  A
bus_adjust_resource() wrapper is provided for use in drivers.
2011-04-29 21:36:45 +00:00
Andriy Gapon
b7d28b2e0b bus_add_child: add specialized default implementation that calls panic
If a kobj method doesn't have any explicitly provided default
implementation, then it is auto-assigned kobj_error_method.
kobj_error_method is proper only for methods that return error code,
because it just returns ENXIO.
So, in the case of unimplemented bus_add_child caller would get
(device_t)ENXIO as a return value, which would cause the mistake to go
unnoticed, because return value is typically checked for NULL.
Thus, a specialized null_add_child is added.  It would have sufficied
for correctness to return NULL, but this type of mistake was deemed to
be rare and serious enough to call panic instead.

Watch out for this kind of problem with other kobj methods.

Suggested by:	jhb, imp
MFC after:	2 weeks
2010-09-13 08:34:20 +00:00
Andriy Gapon
3d844eddb7 bus_add_child: change type of order parameter to u_int
This reflects actual type used to store and compare child device orders.
Change is mostly done via a Coccinelle (soon to be devel/coccinelle)
semantic patch.
Verified by LINT+modules kernel builds.

Followup to:	r212213
MFC after:	10 days
2010-09-10 11:19:03 +00:00
Alexander Motin
93fc07b434 Virtualize pci_remap_msi_irq() call from general MSI code. It allows MSI
(FSB interrupts) to be used by non-PCI devices, such as HPET.
2010-06-14 07:10:37 +00:00
John Baldwin
37b8ef16cd Add a facility for associating optional descriptions with active interrupt
handlers.  This is primarily intended as a way to allow devices that use
multiple interrupts (e.g. MSI) to meaningfully distinguish the various
interrupt handlers.
- Add a new BUS_DESCRIBE_INTR() method to the bus interface to associate
  a description with an active interrupt handler setup by BUS_SETUP_INTR.
  It has a default method (bus_generic_describe_intr()) which simply passes
  the request up to the parent device.
- Add a bus_describe_intr() wrapper around BUS_DESCRIBE_INTR() that supports
  printf(9) style formatting using var args.
- Reserve MAXCOMLEN bytes in the intr_handler structure to hold the name of
  an interrupt handler and copy the name passed to intr_event_add_handler()
  into that buffer instead of just saving the pointer to the name.
- Add a new intr_event_describe_handler() which appends a description string
  to an interrupt handler's name.
- Implement support for interrupt descriptions on amd64 and i386 by having
  the nexus(4) driver supply a custom bus_describe_intr method that invokes
  a new intr_describe() MD routine which in turn looks up the associated
  interrupt event and invokes intr_event_describe_handler().

Requested by:	many
Reviewed by:	scottl
MFC after:	2 weeks
2009-10-15 14:54:35 +00:00
John Baldwin
4ef60d2686 Add support for multiple passes of the device tree during the boot-time
probe.  The current device order is unchanged.  This commit just adds the
infrastructure and ABI changes so that it is easier to merge later changes
into 8.x.
- Driver attachments now have an associated pass level.  Attachments are
  not allowed to probe or attach to drivers until the system-wide pass level
  is >= the attachment's pass level.  By default driver attachments use the
  "last" pass level (BUS_PASS_DEFAULT).  Driver's that wish to probe during
  an earlier pass use EARLY_DRIVER_MODULE() instead of DRIVER_MODULE() which
  accepts the pass level as an additional parameter.
- A new method BUS_NEW_PASS has been added to the bus interface.  This
  method is invoked when the system-wide pass level is changed to kick off
  a rescan of the device tree so that drivers that have just been made
  "eligible" can probe and attach.
- The bus_generic_new_pass() function provides a default implementation of
  BUS_NEW_PASS().  It first allows drivers that were just made eligible for
  this pass to identify new child devices.  Then it propogates the rescan to
  child devices that already have an attached driver by invoking their
  BUS_NEW_PASS() method.  It also reprobes devices without a driver.
- BUS_PROBE_NOMATCH() is only invoked for devices that do not have
  an attached driver after being scanned during the final pass.
- The bus_set_pass() function is used during boot to raise the pass level.
  Currently it is only called once during root_bus_configure() to raise
  the pass level to BUS_PASS_DEFAULT.  This has the effect of probing all
  devices in a single pass identical to previous behavior.

Reviewed by:	imp
Approved by:	re (kib)
2009-06-09 14:26:23 +00:00
John Baldwin
0d484d249f Allow device hints to wire the unit numbers of devices.
- An "at" hint now reserves a device name.
- A new BUS_HINT_DEVICE_UNIT method is added to the bus interface.  When
  determining the unit number of a device, this method is invoked to
  let the bus driver specify the unit of a device given a specific
  devclass.  This is the only way a device can be given a name reserved
  via an "at" hint.
- Implement BUS_HINT_DEVICE_UNIT() for the acpi(4) and isa(4) bus drivers.
  Both of these busses implement this by comparing the resources for a
  given hint device with the resources enumerated by ACPI/PnPBIOS and
  wire a unit if the hint resources are a subset of the "real" resources.
- Use bus_hinted_children() for adding hinted devices on isa(4) busses
  now instead of doing it by hand.
- Remove the unit kludging from sio(4) as it is no longer necessary.

Prodding from:	peter, imp
OK'd by:	marcel
MFC after:	1 month
2008-11-18 21:01:54 +00:00
John Baldwin
dcc8106854 Implement a BUS_BIND_INTR() method in the bus interface to bind an IRQ
resource to a CPU.  The default method is to pass the request up to the
parent similar to BUS_CONFIG_INTR() so that all busses don't have to
explicitly implement bus_bind_intr.  A bus_bind_intr(9) wrapper routine
similar to bus_setup/teardown_intr() is added for device drivers to use.
Unbinding an interrupt is done by binding it to NOCPU.  The IRQ resource
must be allocated, but it can happen in any order with respect to
bus_setup_intr().  Currently it is only supported on amd64 and i386 via
nexus(4) methods that simply call the intr_bind() routine.

Tested by:	gallatin
2008-03-20 21:24:32 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
John Baldwin
3bb00f61a2 - Revert making bus_generic_add_child() the default for BUS_ADD_CHILD().
Instead, we want busses to explicitly specify an add_child routine if they
  want to support identify routines, but by default disallow having outside
  drivers add devices.
- Give smbus(4) an explicit bus_add_child() method.

Requested by:	imp
2006-09-11 22:20:37 +00:00
John Baldwin
4288462f38 Add a default method for BUS_ADD_CHILD() that just calls
device_add_child_ordered().  Previously, a device driver that wanted to
add a new child device in its identify routine had to know if the parent
driver had a custom bus_add_child method and use BUS_ADD_CHILD() in that
case, otherwise use device_add_child().  Getting it wrong in either
direction would result in panics or failure to add the child device.  Now,
BUS_ADD_CHILD() always works isolating child drivers from having to know
intimate details about the parent driver.

Discussed with:	imp
MFC after:	1 week
2006-09-11 19:41:31 +00:00
John-Mark Gurney
378f231e7d add a newbus method for obtaining the bus's bus_dma_tag_t... This is
required by arches like sparc64 (not yet implemented) and sun4v where there
are seperate IOMMU's for each PCI bus...  For all other arches, it will
end up returning NULL, which makes it a no-op...

Convert a few drivers (the ones we've been working w/ on sun4v) to the
new convection...  Eventually all drivers will need to replace the parent
tag of NULL, w/ bus_get_dma_tag(dev), though dev is usually different for
each driver, and will require hand inspection...

Reviewed by:	scottl (earlier version)
2006-09-03 00:27:42 +00:00
Warner Losh
db2bc1bb82 Create bus_enumerate_hinted_children. This routine will allow drivers
to use the hinted child system.  Bus drivers that use this need to
implmenet the bus_hinted_child method, where they actually add the
child to their bus, as they see fit.  The bus is repsonsible for
getting the attribtues for the child, adding it in the right order,
etc.  ISA hinting will be updated to use this method.

MFC After: 3 days
2006-07-08 17:06:15 +00:00
Warner Losh
9454b2d864 /* -> /*- for copyright notices, minor format tweaks as necessary 2005-01-06 23:35:40 +00:00
Warner Losh
9f7f340a0f Minor formatting fixes for lines > 80 characters 2004-08-12 17:26:22 +00:00
Doug Rabson
4c4392e791 Add doxygen doc comments for most of newbus and the BUS interface. 2004-07-18 16:30:31 +00:00
Marcel Moolenaar
da13b8f9fe Introduce BUS_CONFIG_INTR(). The method allows devices to tell parents
about interrupt trigger mode and interrupt polarity. This allows ACPI
for example to pass interrupt resource information up the hierarchy.
The default implementation of the method therefore is to pass the
request to the parent.

Reviewed by: jhb, njl
2003-09-10 21:37:10 +00:00
Matthew N. Dodd
c844066969 Give print_child a default method. 2003-03-25 04:32:52 +00:00
Warner Losh
3d9841b4eb Add two interfaces to allow for busses to report the pnpinfo for
devices as well as their location on the bus.
2002-10-07 05:06:38 +00:00
Warner Losh
74014b7f0a Clarify the return value from child_present. 2002-09-11 04:22:10 +00:00
Warner Losh
5878eb3fca Add bus_child_present and the child_present method to bus_if.m 2002-07-21 03:28:43 +00:00
Mark Murray
bd41864183 Use protected names (_foo) to cutdown on boatloads of lint warnings. 2002-04-21 11:16:10 +00:00
Bruce Evans
c0f7f75fd7 "Fixed" -Wshadow warnings by changing the name of some function parameters
from `index' to `indx'.  The correct fix would be to not support or use
index().
2002-03-27 04:04:17 +00:00
Matthew N. Dodd
46aa504e42 Alter the return value and arguments of the GET_RESOURCE_LIST bus method.
Alter consumers of this method to conform to the new convention.
Minor cosmetic adjustments to bus.h.

This isn't of concern as this interface isn't in use yet.
2000-11-28 06:49:15 +00:00
Matthew N. Dodd
0cb53e2487 Add new bus method 'GET_RESOURCE_LIST' and appropriate generic
implementation.

Add bus_generic_rl_{get,set,delete,release,alloc}_resource() functions
which provide generic operations for devices using resource list style
resource management.

This should simplify a number of bus drivers.  Further commits to follow.
2000-10-18 05:15:40 +00:00
Doug Rabson
f7b7769172 * Factor out the object system from new-bus so that it can be used by
non-device code.
* Re-implement the method dispatch to improve efficiency. The new system
  takes about 40ns for a method dispatch on a 300Mhz PII which is only
  10ns slower than a direct function call on the same hardware.

This changes the new-bus ABI slightly so make sure you re-compile any
driver modules which you use.
2000-04-08 14:17:18 +00:00
Doug Rabson
25afb89b1c * Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
  layout of ivars.

* Move set_resource, get_resource and delete_resource from
  isa_if.m to bus_if.m.

* Simplify driver code by providing wrappers to those methods:

     bus_set_resource(dev, type, rid, start, count);
     bus_get_resource(dev, type, rid, startp, countp);
     bus_get_resource_start(dev, type, rid);
     bus_get_resource_count(dev, type, rid);
     bus_delete_resource(dev, type, rid);

* Delete isa_get_rsrc and use bus_get_resource_start instead.

* Fix a stupid typo in isa_alloc_resource reported by Takahashi
  Yoshihiro <nyan@FreeBSD.org>.

* Print a diagnostic message if we can't assign resources to a PnP
  device.

* Change device_print_prettyname() so that it doesn't print
  "(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
Warner Losh
6d4d0ac958 Call DEVICE_IDENIFY in bus_generic_driver_added to allow devices to
add nodes to the tree.  Also, default to bus_generic_driver_added for
the BUS_DRIVER_ADDED method.

This allows newbus busses to be kldload'd.

Reviewed by: dfr
1999-10-09 03:48:18 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Matthew N. Dodd
15317dd875 Alter the behavior of sys/kern/subr_bus.c:device_print_child()
- device_print_child() either lets the BUS_PRINT_CHILD
	  method produce the entire device announcement message or
	  it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

	- Devices are 'on' a bus, not 'at' it.
	- If a custom BUS_PRINT_CHILD method does the same thing
	  as bus_generic_print_child(), use bus_generic_print_child()
	- Use device_get_nameunit() instead of both
	  device_get_name() and device_get_unit()
	- All BUS_PRINT_CHILD methods return the number of
	  characters output.

Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
Doug Rabson
ca7036d8cb Add a hook for a bus to detect child devices which didn't find drivers.
This allows the bus to print an informative message about unknown devices.

Submitted by: Matthew N. Dodd <winter@jurai.net>
1999-07-11 13:42:37 +00:00
Doug Rabson
bea6af4d31 * Change device_add_child_after() to device_add_child_ordered() which is
easier to use and more flexible.
* Change BUS_ADD_CHILD to take an order argument instead of a place.
* Define a partial ordering for isa devices so that sensitive devices are
  probed before non-sensitive ones.
1999-05-28 09:25:16 +00:00