Commit Graph

46 Commits

Author SHA1 Message Date
Kevin Lo
5945b5f5ab Rename definition of IEEE80211_FC1_WEP to IEEE80211_FC1_PROTECTED.
The origin of WEP comes from IEEE Std 802.11-1997 where it defines
whether the frame body of MAC frame has been encrypted using WEP
algorithm or not.
IEEE Std. 802.11-2007 changes WEP to Protected Frame, indicates
whether the frame is protected by a cryptographic encapsulation
algorithm.

Reviewed by:	adrian, rpaulo
2014-01-08 08:06:56 +00:00
Rui Paulo
d8df5f3d71 Add ieee80211_add_{qos,wpa,rsn}() functions since they are needed by an
OpenBSD driver that is being ported to FreeBSD.

Reviewed by:	adrian
2013-07-25 06:23:26 +00:00
Monthadar Al Jaberi
0cc7a79be6 Mesh: QoS Control field bit flags fix.
* The following bit flags where incroccetly defined:
    o Mesh Control Present
    o Mesh Power Save Level
    o RSPI
  This is now corrected according to Table 8.4 as per IEEE 802.11 2012;

Approved by:	adrian (mentor)
2013-02-14 20:00:38 +00:00
Adrian Chadd
2a72e4b222 Fix an incorrect comment. 2012-08-08 17:16:06 +00:00
Monthadar Al Jaberi
9fc85253aa Net80211s update: Mesh Gate Announcement and removal of Portal Announcement.
* Renamed IEEE80211_ELEMID_MESHPANN to IEEE80211_ELEMID_MESHGANN according to
 amendment;
 * Added IEEE80211_IOC_MESH_GATE that controls whether Mesh Gate Announcement
 is activated or not;
 * Renamed all flags from Portal to Gate in HWMP frames;
 * Removed IEEE80211_ACTION_MESHPANN enum cause its part of the Mesh Action
 category now as per amendment;
 * Renamed IEEE80211_MESHFLAGS_PORTAL to IEEE80211_MESHFLAGS_GATE in
 ieee80211_mesh_state flags;
 * Modified ieee80211_hwmp.c/ieee80211_mesh.c to use new GATE flags;

Approved by: adrian
2012-05-01 16:14:18 +00:00
Monthadar Al Jaberi
ebeaa1ade5 Added Self-protected action category (including MPM).
* Added new action category IEEE80211_ACTION_CAT_SELF_PROT which is used by 11s
for Mesh Peering Management;
* Updated Self protected enum Action codes to start from 1 instead of 0
according to the standard spec;
* Removed old and wrong action categories IEEE80211_ACTION_CAT_MESHPEERING;
* Modified ieee80211_mesh.c and ieee80211_action.c to use the new action
category code;
* Added earlier verification code in ieee80211_input;

Approved by: adrian
2012-05-01 15:35:10 +00:00
Adrian Chadd
91216c714c * Introduce new flag for QoS control field;
* Change in mesh_input to validate that QoS is set and Mesh Control field
  is present, also both bytes of the QoS are read;
* Moved defragmentation in mesh_input before we try to forward packet as
  inferred from amendment spec, because Mesh Control field only present in first
  fragment;
* Changed in ieee80211_encap to set QoS subtype and Mesh Control field present,
  only first fragment have Mesh Control field present bit equal to 1;

Submitted by:	monthadar@gmail.com
2012-03-04 05:52:26 +00:00
Adrian Chadd
bdd2a07668 * Added IEEE80211_ACTION_CAT_MESH in ieee80211.h as specified amendment spec;
* Moved old categories as specified by D4.0 to be action fields of MESH category
  as specified in amendment spec;
* Modified functions to use MESH category and its action fields:
  + ieee80211_send_action_register
  + ieee80211_send_action
  + ieee80211_recv_action_register
  +ieee80211_recv_action;
* Modified ieee80211_hwmp_init and hwmp_send_action so they uses correct
  action fields as specified in amendment spec;
* Modified ieee80211_parse_action so that it verifies MESH frames.
* Change Mesh Link Metric to use one information element as amendment spec.
  Draft 4.0 defined two different information elements for request and response.

Submitted by:	monthadar@gmail.com
2012-03-04 05:49:39 +00:00
Adrian Chadd
60084eb481 Update the 802.11s IE numbers to represent the latest 802.11 amendment standard.
Submitted by:	monthadar@gmail.com
Reviewed by:	rpaulo
2012-02-08 06:56:19 +00:00
Adrian Chadd
39b86fdc25 Update the mesh reason codes to match the latest 802.11s specification.
Submitted by:	<monthadar@gmail.com>
Reviewed by:	rpaulo
2012-02-06 00:26:29 +00:00
Adrian Chadd
32b0e64b56 Add 802.11h quiet time element support into net80211.
This supports both station and hostap modes:

* Station mode quiet time element support listens to quiet time
  IE's and modifies the local quiet time configuration as appropriate;
* Hostap mode both obeys the locally configured quiet time period
  and includes it in beacon frames so stations also can obey as needed.

Submitted by:	Himali Patel <himali.patel@sibridgetech.com>
Sponsored by:	Sibridge Technologies
2011-11-08 04:00:24 +00:00
Bernhard Schmidt
96283082bb Add a new mgmt subtype "ACTION NO ACK" defined in 802.11n-2009, while here
clean up parts of the *_recv_mgmt() functions.
- make sure appropriate counters are bumped and debug messages are printed
- order the unhandled subtypes by value and add a few missing ones
- fix some whitespace nits
- remove duplicate code in adhoc_recv_mgmt()
- remove a useless comment, probably left in while c&p
2011-02-21 19:59:43 +00:00
Rui Paulo
c77735e28f Update 802.11s mesh support to draft 3.03. This includes a revised frame
format for peering and changes to the PERR frames.
Note that this is incompatible with the previous code.

Reviewed by:	sam
MFC after:	1 week
2009-09-22 18:18:14 +00:00
Rui Paulo
59aa14a91d Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.

Authentication and encryption are not implemented.

There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).

A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.

Drivers that support mesh networks right now are: ath, ral and mwl.

More information at: http://wiki.freebsd.org/WifiMesh

Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.

Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.

Reviewed by:	sam
Approved by:	re (kensmith)
Obtained from:	projects/mesh11s
2009-07-11 15:02:45 +00:00
Sam Leffler
32bdd57b9b Correct ieee80211_gettid:
o don't increment extracted tid, this was a vestige of IEEE80211_NONQOS_TID
  being defined as 0 (w/ real tid's +1)
o handle 4-address frames (add IEEE80211_IS_DSTODS to check if an 802.11
  header is DSTODS)

Submitted by:	cbzimmer
Reviewed by:	avatar
2009-06-09 16:32:07 +00:00
Sam Leffler
1dadcead9d o correct/add action frame categories
o add IEEE80211_STATUS_MISSING_HT_CAPS, added in 11n D3.0 spec
2009-06-05 23:20:41 +00:00
Sam Leffler
c70761e6b5 o station mode channel switch support
o IEEE80211_IOC_CHANSWITCH fixups:
  - restrict to hostap vaps
  - return EOPNOTSUPP instead of EINVAL when applied to !hostap vap
    or to a vap w/o 11h enabled
  - interpret count of 0 to mean cancel the current CSA

Reviewed by:	rpaulo, avatar
2009-06-04 15:57:38 +00:00
Sam Leffler
1fdf2b5058 add block ack frame id 2009-05-18 19:02:55 +00:00
Sam Leffler
dca68715ab promote ieee80211_seq typedef 2009-05-02 20:25:22 +00:00
Sam Leffler
9d90db9307 o move tdma+superg protocol defs out of public view
o add #ifdef _KERNEL to superg+tdma include files so they can be used
  by user code to get the protocol defs
2009-03-26 21:29:03 +00:00
Sam Leffler
2bc3ce7732 Minor cleanups of tdma protocol handling:
o break out version-related code to simplify rev'ing the protocol
o add parameter validation macros so checks that appear multiple places
  are consistent (and easy to change)
o add protocol version check when looking for a scan candidate
o improve scan debug output format
o rewrite beacon update handling to calculate a bitmask of changed values
  and pass that down through the driver callback so drivers can optimize work
o do slot bounds check before use when parsing received beacons
2009-03-18 19:28:17 +00:00
Sam Leffler
3d13a95516 o make %b msg bit defines public (to user apps too)
o rename IEEE80211_C_CRYPTO_BITS to IEEE80211_CRYPTO_BITS
2009-01-27 23:00:38 +00:00
Sam Leffler
10ad9a77f3 TDMA support for long distance point-to-point links using ath devices:
o add net80211 support for a tdma vap that is built on top of the
  existing adhoc-demo support
o add tdma scheduling of frame transmission to the ath driver; it's
  conceivable other devices might be capable of this too in which case
  they can make use of the 802.11 protocol additions etc.
o add minor bits to user tools that need to know: ifconfig to setup and
  configure, new statistics in athstats, and new debug mask bits

While the architecture can support >2 slots in a TDMA BSS the current
design is intended (and tested) for only 2 slots.

Sponsored by:	Intel
2009-01-08 17:12:47 +00:00
Sam Leffler
231bb1bc4f o fix spelling of EOSP
o correct SMPS values
2008-09-21 22:09:18 +00:00
Sam Leffler
8524d591d1 o fix BAR definitions
o add 11e reason codes
2008-09-06 17:14:27 +00:00
Sam Leffler
ba0c757772 add WPS oui
Submitted by:	"Chuck Tuffli" <chuck@tuffli.net>
MFC after:	3 days
2008-08-06 15:54:59 +00:00
Sam Leffler
e5d6bfc3c9 add PLCP service bit definitions 2008-05-11 23:20:26 +00:00
Sam Leffler
b032f27c36 Multi-bss (aka vap) support for 802.11 devices.
Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral).  Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by:	Hobnob and Marvell
Reviewed by:	many
Obtained from:	Atheros (some bits)
2008-04-20 20:35:46 +00:00
Sam Leffler
d4a401b619 correct TID_TO_WME_AC handling of BE
MFC after:	3 days
2007-11-23 06:12:46 +00:00
Sam Leffler
12c1df4bc0 correct MIMO power save action frame format;
this one really is from the D2.04 spec

MFC after:	3 days
2007-11-14 21:28:48 +00:00
Sam Leffler
1b6167d239 sync 11n support with vap code base; many changes based on interop
testing with all major vendors

MFC after:	1 week
2007-11-02 05:22:25 +00:00
Sam Leffler
eddedabe31 Miscellaneous fixups to 802.11 defs:
o update 11n definitions to D2.0 spec
o add IEEE80211_CAPINFO_SPECTRUM_MGMT for DFS support
o add CSA ie definition for DFS support
o purge some unused definitions
o correct 802.11 reason and status codes
o correct reason code returned when a sta tries to associate to an
  ap operating with WPA/RSN but without a WPA/RSN ie

Reviewed by:	thompsa, avatar
Approved by:	re (blanket wireless)
2007-09-05 20:29:51 +00:00
Sam Leffler
68e8e04e93 Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
  fully enumerated and uniquely identify the operating characteristics;
  these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
  background scanning and roaming
o move scanning support into loadable modules based on the operating
  mode to enable different policies and reduce the memory footprint
  on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
  mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
  we use a simple algorithm to trigger a roam: we threshold the rssi
  and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
  drivers but is incomplete; it's included now to establish a baseline
  for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
  prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
  encapsulation (note this can be used with any card that can tx+rx
  large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
  authentication and association failures
o enable the addition of sta mode power save support for drivers that need
  net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
  results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
  index into the rate set; this needs to be extended to deal with
  multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing

Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
       dynamic turbo (lightly tested), 11n (sniffing only and needs
       new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
       rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested

This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others.  Much of the scanning work was supported by
Atheros.  The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
Sam Leffler
ae8b733312 copyright updates:
o update to include 2007
o switch back to a 2-clause bsd-only license

Reviewed by:	onoe
2007-06-06 04:56:04 +00:00
Warner Losh
f4fcdb0eb5 Fix packing on the country band descriptor. No real change since this
is unused.

Reviewed by: sam
2006-12-01 18:40:51 +00:00
Sam Leffler
202b0d1101 o move min/max beacon interval and dtim period to public location
o add min/max beacon miss threshold settings
o delete IEEE80211_SWBMISS_THRESHOLD, it was never used

MFC after:	2 weeks
2006-07-26 03:05:34 +00:00
Sam Leffler
33acb1cec1 o add IEEE80211_FRAG_DEFAULT
o move default settings for RTS and frag thresholds to ieee80211_var.h
2005-07-22 16:55:27 +00:00
Sam Leffler
7268fa6483 move AID implementation defines from the protocol definitions to
where they are used
2005-06-10 04:42:34 +00:00
Sam Leffler
db966c8b2b remove netbsd rcsid lines; they are way out of date and we appear to be
diverging too much to make tracking these files worthwhile
2004-12-31 22:44:26 +00:00
Sam Leffler
1f1d781074 bump copyright for 2005 2004-12-31 22:42:38 +00:00
Sam Leffler
8a1b9b6ad4 Update 802.11 support; too much new functionality to fully describe
here but it includes completed 802.11g, WPA, 802.11i, 802.1x, WME/WMM,
AP-side power-save, crypto plugin framework, authenticator plugin framework,
and access control plugin frameowrk.
2004-12-08 17:26:47 +00:00
Sam Leffler
f3fc4ae54b add definitions for WME, WPA (and WPA2), and miscellaneous other stuff
that's coming soon

Obtained from:	madwifi
2004-04-05 17:47:40 +00:00
Sam Leffler
6f161f0342 Handle SIOCSIFMTU ioctl directly so we can apply 802.11-specific bounds.
Note that the min is actually constrained to IF_MINMTU by the if layer.
2004-01-13 06:22:55 +00:00
Sam Leffler
993338b6ab add definitions for various control frames and a minimum-sized frame that
we use to define IEEE80211_MIN_LEN; the minimal length for frames drivers
may pass up into the 802.11 layer
2003-09-15 19:36:34 +00:00
Sam Leffler
7535e66acd revise copyright notices per discussion with Atsushi Onoe <onoe@sm.sony.co.jp> 2003-06-27 05:13:52 +00:00
Sam Leffler
1a1e1d2157 new 802.11 layer:
o code reorg (relative to old netbsd-derived code) for future growth
o drivers now specify available channels and rates and 802.11 layer handles
  almost all ifmedia actions
o multi-mode support for 11a/b/g devices
o 11g protocol additions (incomplete)
o new element id additions (for other than 11g)
o node/station table redone for proper locking and to eliminate driver
  incestuousness
o split device flags and capabilities to reduce confusion and provide room
  for expansion
o incomplete power management infrastructure (need to revisit)
o incomplete hooks for software retry
o more...
2003-06-23 16:55:01 +00:00