Commit Graph

22 Commits

Author SHA1 Message Date
Marius Strobl
edff99cad1 Add convenience macros for the full register set and use them to replace
magic constants in clkbrd.c

Info from:	OpenSolaris
2006-03-28 19:46:48 +00:00
Marius Strobl
aa3ee926a9 - Register the generic implementations for the device shutdown, suspend
and resume methods so these events propagate through the device driver
  hierarchy.
- In dma(4) enable the chaining of the DMA engine interrupt handler for
  the LANCE devices via a dma_setup_intr(). This was commented out before
  as I was unsure whether I'd use it but this is probably cleaner than
  fiddling with the DMA engine interrupt in the LANCE driver directly.
- In ebus_setup_dinfo() free 'intrs' instead of 'reg' twice in case
  setting up a child fails due to routing one of its interrupts fails. [1]

Found by:	Coverity Prevent [1]
MFC after:	3 days
2006-01-26 21:14:32 +00:00
Marius Strobl
abffa5185a Remove superfluous bzero()'ing of the softc. 2005-11-30 16:13:49 +00:00
Marius Strobl
a1a074b6b3 - Convert these bus drivers to make use of the newly introduced set of
ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order
  to reduce code duplication.
- While here sync the various sparc64 bus drivers a bit (handle failure
  to attach a child gracefully instead of panicing, move the printing
  of child resources common to bus_print_child() and bus_probe_nomatch()
  implementations of a bus into a <bus>_print_res() function, ...) and
  fix some minor bugs and nits (plug memory leaks present when attaching
  a bus or child device fails, remove unused struct members, ...).

Additional testing by:	kris (central(4) and fhc(4))
2005-11-22 16:39:44 +00:00
Marius Strobl
708c604382 Remove superfluous breaks. 2005-06-05 10:16:27 +00:00
Marius Strobl
6283ced1e2 - Add suport for the bus_get_resource() device interface method to
central(4) and fhc(4) by using bus_generic_rl_get_resource().
- Remove some superfluous breaks in central.c
2005-05-19 15:09:56 +00:00
Marius Strobl
be7a88bd72 Add a driver for the 'clock-board' device (the clock board is an
inevitable component in Sun Exx00 machines and provides serial ports,
NVRAM and TOD amongst others which are handled by uart(4) and eeprom(4)
respectively). This driver currently only prints out information about
the chassis on attach and allows to blink the 'Cycling' LED (which is
duplicated on the front panel) of the clock board just like fhc(4) does
for the other boards. The device name for the LED is /dev/led/clockboard.

Obtained from:	OpenBSD
Tested by:	joerg
2005-03-19 01:04:48 +00:00
Marius Strobl
771997501f - Add a device interface method for bus_get_resource_list() and use
bus_generic_rl_release_resource() for the bus_release_resource() method
  instead of a local copy.
- Correctly handle pass-through allocations in fhc_alloc_resource().
- In case the board model can't be determined just print "unknown model"
  so the physical slot number is reported in any case.
- Add support for blinking the 'Cycling' LED of boards on a fhc(4) hanging
  of off the nexus (i.e. all boards except the clock board) via led(4).
  All boards have at least 3 controllable status LEDs, 'Power', 'Failure'
  and 'Cycling'. While the 'Cycling' LED is suitable for signaling from
  the OS the others are better off being controlled by the firmware.
  The device name for the 'Cycling' LED of each board is /dev/led/boardX
  where X is the physical slot number of the board. [1]

Obtained from:	OpenBSD [1]
Tested by:	joerg [1]
2005-03-19 00:50:28 +00:00
Marius Strobl
4d9d925bbc Enrich with some register descriptions and additional register macros.
Obtained from:	OpenBSD
2005-03-19 00:48:34 +00:00
Marius Strobl
c90ff9ce5a - sparc64/fhc/fhc.c:
Change fhc(4) to use IRQ numbers instead of RIDs for allocating the
  IRQs of children. This works similar to e.g. sbus(4), i.e. add the
  IRQ resources as fully specified to the resource lists of the children,
  allocate them like normal. When establishing the interrupt search the
  interrupt maps of the children for a matching INO to determine which
  map we need to write the fully specified interrupt number to and to
  enable the mapping (before the RID was used to indicate which interrupt
  map to use).

- dev/puc/puc.c:
  Revert rev. 1.38, with the above change fhc(4) no longer needs special
  treatment for allocating IRQs.

Thanks to:	joerg for providing access to an E3500
2005-03-04 22:23:21 +00:00
Marius Strobl
98c4649792 Let central(4) manage the resources of its children so they don't need
to fiddle with OFW themselves.

Thanks to:	joerg for providing access to an E3500
2005-03-04 22:21:11 +00:00
Marius Strobl
8e1ff29d07 Minor changes:
- Use FBSDID.
- Remove unused macro.
- Use auto-generated typedefs for the prototypes of the bus and device
  interface functions.
- Terminate the output of device_printf(9) with a newline char.
- Honour the return values of malloc(), OF_getprop(), etc.
- Use __func__ instead of hardcoded function names.
- Print the physical slot number and the board model on attach.

MFC after:	1 month
2005-03-04 16:01:57 +00:00
Marius Strobl
26280d88d7 - Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
  properties in drivers for devices on Open Firmware supported busses. The
  standard properties "reg", "interrupts" und "address" are not covered by
  this interface because they are only of interest in the respective bridge
  code. There's a remaining standard property "status" which is unclear how
  to support properly but which also isn't used in FreeBSD at present.
  This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
  ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
  vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
  This in turn allows to simplify and remove code-duplication in drivers for
  devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
  drivers for their children to use the ofw_bus kobj-interface. The IVAR-
  interfaces of the Central, EBus and FHC are entirely replaced by this. The
  PCI bus driver used its own kobj-interface and now also uses the ofw_bus
  one. The IVARs special to the SBus, e.g. for retrieving the burst size,
  remain.
  Beware: this causes an ABI-breakage for modules of drivers which used the
  IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
  recompiled.
  The style-inconsistencies introduced in some of the bus drivers will be
  fixed by tmm@ in a generic clean-up of the respective drivers later (he
  requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
  use the ofw_bus kobj-interface. This invloves removing the IVARs related
  to the "reg" property which were unused and a leftover from the NetBSD
  origini of the code. There's no ABI-breakage caused by this because none
  of these driver are currently built as modules.
  There are other powerpc bus drivers which can be converted to the ofw_bus
  kobj-interface, e.g. the PCI bus driver, which should be done together
  with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
  advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by:	grehan, tmm
Approved by:	re (scottl)
Discussed with:	tmm
Tested with:	Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
Warner Losh
c82338ca27 Really remove __RMAN_RESORUCE_VISIBLE 2004-07-03 20:49:00 +00:00
Warner Losh
8acf75a06d Use the rman_* functions in preference to reaching into struct resource.
Remove __RMAN_RESOURCE_VISIBLE after compilation confirms it is now not
needed.
2004-07-03 20:48:01 +00:00
Marius Strobl
4eae91a8f7 These need __RMAN_RESOURCE_VISIBLE, too. 2004-06-30 23:21:07 +00:00
Poul-Henning Kamp
fd360128ff Add missing <sys/module.h> instances which were shadowed by the nested
include in <sys/kernel.h>
2004-06-03 05:58:30 +00:00
Jake Burkholder
367a0516d8 Fix definite panic when releasing interrupt resources.
Spotted by:	tmm
2003-02-19 19:40:40 +00:00
Jake Burkholder
b41be772ad Missed a missing M_WAITOK. 2003-02-19 17:29:07 +00:00
Jake Burkholder
a5902eaf0c Use M_WAITOK. 2003-02-19 17:25:58 +00:00
Jake Burkholder
63ec9d57c9 Implement interrupt resource allocation and setup. Set the interrupt
group number properly based on the board id.  Perform dummy reads of
registers after writing to flush the hardware write buffers.

This gets the soon to be committed zs attachment working.
2003-02-19 08:23:38 +00:00
Jake Burkholder
012d9539bf Add drivers for the central and fhc busses found in enterprise class
UltraSPARCs, and an eeprom attachment for fhc, which allows the date
to be set properly on these machines.  Central is a wierd bus which
seems to only ever have 1 fhc attached to it.   FHC (FireHose Controller)
is another wierd bus with various things on it depending where its attached.
The fhc attached to central has eeprom and zs, and the fhcs which attach
directly to nexus have simm-status, environment and other nodes, none of
which I'll probably ever have documentation for.

Thanks to Ade Lovett for providing access to an 8 cpu e4500.
2003-02-18 09:01:01 +00:00