From alc:
Move pageable pipe memory to a seperate kernel submap to avoid awkward
vm map interlocking issues. (Bad explanation provided by me.)
From me:
Rework pipespace accounting code to handle this new layout, and adjust
our default values to account for the fact that we now have a solid
limit on allocations.
Also, remove the "maxpipes" limit, as it no longer has a purpose.
(The limit on kva usage solves the problem of having two many pipes.)
application could cause a wired page to be freed. In general,
vm_page_hold() should be preferred for ephemeral kernel mappings of pages
borrowed from a user-level address space. (vm_page_wire() should really be
reserved for indefinite duration pinning by the "owner" of the page.)
Discussed with: silby
Submitted by: tegge
on a non-blocking pipe in cases where select(2) returns the file
descriptor as ready for write. This in turns causes libc_r, for
one, to busy wait in such cases.
Note: it is a quick performance fix, a more complex fix might be
required in case this turns out to have unexpected side effects.
Reviewed by: silby
MFC after: 3 days
a long-standing mistake in the way a portion of a pipe's KVA is
allocated. Specifically, kmem_alloc_pageable() is inappropriate
for use in the "direct" case because it allows a preceding vm map entry
and vm object to be extended to support the new KVA allocation.
However, the direct case KVA allocation should not have a backing
vm object. This is corrected by using kmem_alloc_nofault().
Submitted by: tegge (with the above explanation by me)
- Use atomic ops to update the bigpipe count
- Make the bigpipe count sysctl readable
- Remove a duplicate comparison in an if statement
- Comment two SYSCTLs.
- Limit the total number of pipes so that we do not
exhaust all vm objects in the kernel map. When
this limit is reached, a ratelimited message will
be printed to the console.
- Put a soft limit on the amount of memory consumable
by pipes. Once the limit has been reached, all new
pipes will be limited to 4K in size, rather than the
default of 16K.
- Put a limit on the number of pages that may be used
for high speed page flipping in order to reduce the
amount of wired memory. Pipe writes that occur
while this limit is exceeded will fall back to
non-page flipping mode.
The above values are auto-tuned in subr_param.c and
are scaled to take into account both the size of
physical memory and the size of the kernel map.
These limits help to reduce the "kernel resources exhausted"
panics that could be caused by opening a large
number of pipes. (Pipes alone are no longer able
to exhaust all resources, but other kernel memory hogs
in league with pipes may still be able to do so.)
PR: 53627
Ideas / comments from: hsu, tjr, dillon@apollo.backplane.com
MFC after: 1 week
where physical addresses larger than virtual addresses, such as i386s
with PAE.
- Use this to represent physical addresses in the MI vm system and in the
i386 pmap code. This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
detection code, and due to kvtop returning vm_paddr_t instead of u_long.
Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.
Sponsored by: DARPA, Network Associates Laboratories
Discussed with: re, phk (cdevsw change)
pointer types, and remove a huge number of casts from code using it.
Change struct xfile xf_data to xun_data (ABI is still compatible).
If we need to add a #define for f_data and xf_data we can, but I don't
think it will be necessary. There are no operational changes in this
commit.
It must be removed because it is done without the pipe being locked
via pipelock() and therefore is vulnerable to races with pipespace()
erroneously triggering it by temporarily zero'ing out the structure
backing the pipe.
It looks as if this assertion is not needed because all manipulation
of the data changed by pipespace() _is_ protected by pipelock().
Reported by: kris, mckusick
dereference the struct sigio pointer without any locking. Change
fgetown() to take a reference to the pointer instead of a copy of the
pointer and call SIGIO_LOCK() before copying the pointer and
dereferencing it.
Reviewed by: rwatson
(1) Where previously the pipe mutex was selectively grabbed during
pipe_ioctl(), now always grab it and then release if if not
needed. This protects the call to mac_check_pipe_ioctl() to
make sure the label remains consistent. (Note: it looks
like sigio locking may be incorrect for fgetown() since we
call it not-by-reference and sigio locking assumes call by
reference).
(2) In pipe_stat(), lock the pipe if MAC is compiled in so that
the call to mac_check_pipe_stat() gets a locked pipe to
protect label consistency. We still release the lock before
returning actual stat() data, risking inconsistency, but
apparently our pipe locking model accepts that risk.
(3) In various pipe MAC authorization checks, assert that the pipe
lock is held.
(4) Grab the lock when performing a pipe relabel operation, and
assert it a little deeper in the stack.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
mac_check_pipe_poll(), mac_check_pipe_read(), mac_check_pipe_stat(),
and mac_check_pipe_write(). This is improves consistency with other
access control entry points and permits security modules to only
control the object methods that they are interested in, avoiding
switch statements.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
accept an 'active_cred' argument reflecting the credential of the thread
initiating the ioctl operation.
- Change fo_ioctl() to accept active_cred; change consumers of the
fo_ioctl() interface to generally pass active_cred from td->td_ucred.
- In fifofs, initialize filetmp.f_cred to ap->a_cred so that the
invocations of soo_ioctl() are provided access to the calling f_cred.
Pass ap->a_td->td_ucred as the active_cred, but note that this is
required because we don't yet distinguish file_cred and active_cred
in invoking VOP's.
- Update kqueue_ioctl() for its new argument.
- Update pipe_ioctl() for its new argument, pass active_cred rather
than td_ucred to MAC for authorization.
- Update soo_ioctl() for its new argument.
- Update vn_ioctl() for its new argument, use active_cred rather than
td->td_ucred to authorize VOP_IOCTL() and the associated VOP_GETATTR().
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
fo_read() and fo_write(): explicitly use the cred argument to fo_poll()
as "active_cred" using the passed file descriptor's f_cred reference
to provide access to the file credential. Add an active_cred
argument to fo_stat() so that implementers have access to the active
credential as well as the file credential. Generally modify callers
of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which
was redundantly provided via the fp argument. This set of modifications
also permits threads to perform these operations on behalf of another
thread without modifying their credential.
Trickle this change down into fo_stat/poll() implementations:
- badfo_poll(), badfo_stat(): modify/add arguments.
- kqueue_poll(), kqueue_stat(): modify arguments.
- pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to
MAC checks rather than td->td_ucred.
- soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather
than cred to pru_sopoll() to maintain current semantics.
- sopoll(): moidfy arguments.
- vn_poll(), vn_statfile(): modify/add arguments, pass new arguments
to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL()
to maintian current semantics.
- vn_close(): rename cred to file_cred to reflect reality while I'm here.
- vn_stat(): Add active_cred and file_cred arguments to vn_stat()
and consumers so that this distinction is maintained at the VFS
as well as 'struct file' layer. Pass active_cred instead of
td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics.
- fifofs: modify the creation of a "filetemp" so that the file
credential is properly initialized and can be used in the socket
code if desired. Pass ap->a_td->td_ucred as the active
credential to soo_poll(). If we teach the vnop interface about
the distinction between file and active credentials, we would use
the active credential here.
Note that current inconsistent passing of active_cred vs. file_cred to
VOP's is maintained. It's not clear why GETATTR would be authorized
using active_cred while POLL would be authorized using file_cred at
the file system level.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
make a series of modifications to the credential arguments relating
to file read and write operations to cliarfy which credential is
used for what:
- Change fo_read() and fo_write() to accept "active_cred" instead of
"cred", and change the semantics of consumers of fo_read() and
fo_write() to pass the active credential of the thread requesting
an operation rather than the cached file cred. The cached file
cred is still available in fo_read() and fo_write() consumers
via fp->f_cred. These changes largely in sys_generic.c.
For each implementation of fo_read() and fo_write(), update cred
usage to reflect this change and maintain current semantics:
- badfo_readwrite() unchanged
- kqueue_read/write() unchanged
pipe_read/write() now authorize MAC using active_cred rather
than td->td_ucred
- soo_read/write() unchanged
- vn_read/write() now authorize MAC using active_cred but
VOP_READ/WRITE() with fp->f_cred
Modify vn_rdwr() to accept two credential arguments instead of a
single credential: active_cred and file_cred. Use active_cred
for MAC authorization, and select a credential for use in
VOP_READ/WRITE() based on whether file_cred is NULL or not. If
file_cred is provided, authorize the VOP using that cred,
otherwise the active credential, matching current semantics.
Modify current vn_rdwr() consumers to pass a file_cred if used
in the context of a struct file, and to always pass active_cred.
When vn_rdwr() is used without a file_cred, pass NOCRED.
These changes should maintain current semantics for read/write,
but avoid a redundant passing of fp->f_cred, as well as making
it more clear what the origin of each credential is in file
descriptor read/write operations.
Follow-up commits will make similar changes to other file descriptor
operations, and modify the MAC framework to pass both credentials
to MAC policy modules so they can implement either semantic for
revocation.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
as part of the TrustedBSD MAC framework. Instrument the creation
and destruction of pipes, as well as relevant operations, with
necessary calls to the MAC framework. Note that the locking
here is probably not quite right yet, but fixes will be forthcoming.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
be done internally.
Ensure that no one can fsetown() to a dying process/pgrp. We need
to check the process for P_WEXIT to see if it's exiting. Process
groups are already safe because there is no such thing as a pgrp
zombie, therefore the proctree lock completely protects the pgrp
from having sigio structures associated with it after it runs
funsetownlst.
Add sigio lock to witness list under proctree and allproc, but over
proc and pgrp.
Seigo Tanimura helped with this.
Turn the sigio sx into a mutex.
Sigio lock is really only needed to protect interrupts from dereferencing
the sigio pointer in an object when the sigio itself is being destroyed.
In order to do this in the most unintrusive manner change pgsigio's
sigio * argument into a **, that way we can lock internally to the
function.
belong to a user virtual address; while this happens to work on some
architectures, it can't on sparc64, since user and kernel virtual
address spaces overlap there (the distinction between them is done via
separate address space identifiers).
Instead, look up the page in the vm_map of the process in question.
Reviewed by: jake
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.
Tested on: i386, alpha, sparc64
can be called both with and without the pipe mutex held. (For example,
if called by pipeselwakeup(), it is held. Whereas, if called by kqueue_scan(),
it is not.)
Reviewed by: alfred
Missed a place where the pipe sleep lock was needed in order to safely grab
Giant, fix it and add an assertion to make sure this doesn't happen again.
Fix typos in the PIPE_GET_GIANT/PIPE_DROP_GIANT that could cause the
wrong mutex to get passed to PIPE_LOCK/PIPE_UNLOCK.
Fix a location where the wrong pipe was being passed to
PIPE_GET_GIANT/PIPE_DROP_GIANT.
fully instaniated.
Revert the logic in pipeclose so that we don't have the entire function
pretty much under a single if() statement, instead invert the test and
just return if it fails.
Submitted (in different form) by: bde
Don't use pool mutexes for pipes. We can not use pool mutexes
because we will need to grab the select lock while holding a pipe
lock which is not allowed because you may not aquire additional
mutexes when holding a pool mutex.
Instead malloc(9) space for the mutex that is shared between the
pipes.
the pipe is locked and shouldn't be.
initialize pipe->pipe_mtxp to NULL when creating pipes in order not
to trip the above assertions.
swap pipe lock with giant around calls to pipe_destroy_write_buffer()
pipe_destroy_write_buffer issue noticed by: jhb
Both ends of the pipe share a pool_mutex, this makes allocation
and deadlock avoidance easy.
Remove some un-needed FILE_LOCK ops while I'm here.
There are some issues wrt to select and the f{s,g}etown code that
we'll have to deal with, I think we may also need to move the calls
to vfs_timestamp outside of the sections covered by PIPE_LOCK.
Seigo Tanimura (tanimura) posted the initial delta.
I've polished it quite a bit reducing the need for locking and
adapting it for KSE.
Locks:
1 mutex in each filedesc
protects all the fields.
protects "struct file" initialization, while a struct file
is being changed from &badfileops -> &pipeops or something
the filedesc should be locked.
1 mutex in each struct file
protects the refcount fields.
doesn't protect anything else.
the flags used for garbage collection have been moved to
f_gcflag which was the FILLER short, this doesn't need
locking because the garbage collection is a single threaded
container.
could likely be made to use a pool mutex.
1 sx lock for the global filelist.
struct file * fhold(struct file *fp);
/* increments reference count on a file */
struct file * fhold_locked(struct file *fp);
/* like fhold but expects file to locked */
struct file * ffind_hold(struct thread *, int fd);
/* finds the struct file in thread, adds one reference and
returns it unlocked */
struct file * ffind_lock(struct thread *, int fd);
/* ffind_hold, but returns file locked */
I still have to smp-safe the fget cruft, I'll get to that asap.
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
(this commit is just the first stage). Also add various GIANT_ macros to
formalize the removal of Giant, making it easy to test in a more piecemeal
fashion. These macros will allow us to test fine-grained locks to a degree
before removing Giant, and also after, and to remove Giant in a piecemeal
fashion via sysctl's on those subsystems which the authors believe can
operate without Giant.
certain cases, and a close() by another process could potentially rip the
pipe out from under the (blocked) locking operation.
Reported-by: Alexander Viro <viro@math.psu.edu>
- Don't release the vm mutex early in pipespace() but instead hold it
across vm_object_deallocate() if vm_map_find() returns an error and
across pipe_free_kmem() if vm_map_find() succeeds.
- Add a XXX above a zfree() since zalloc already has its own locking,
one would hope that zfree() wouldn't need the vm lock.
vm_mtx does not recurse and is required for most low level
vm operations.
faults can not be taken without holding Giant.
Memory subsystems can now call the base page allocators safely.
Almost all atomic ops were removed as they are covered under the
vm mutex.
Alpha and ia64 now need to catch up to i386's trap handlers.
FFS and NFS have been tested, other filesystems will need minor
changes (grabbing the vm lock when twiddling page properties).
Reviewed (partially) by: jake, jhb
Remove comment about setting error for reads on EOF, read returns 0 on
EOF so the code should be ok.
Remove non-effective priority boost, PRIO+1 doesn't do anything
(according to McKusick), if a real priority boost is needed it should
have been +4.
Style fixes:
.) return foo -> return (foo)
.) FLAG1|FlAG2 -> FLAG1 | FlAG2
.) wrap long lines
.) unwrap short lines
.) for(i=0;i=foo;i++) -> for (i = 0; i=foo; i++)
.) remove braces for some conditionals with a single statement
.) fix continuation lines.
md5 couldn't verify the binary because some code had to
be shuffled around to address the style issues.
The pipe code could not handle running out of kva, it would panic
if that happened. Instead return ENFILE to the application which
is an acceptable error return from pipe(2).
There was some slightly tricky things that needed to be worked on,
namely that the pipe code can 'realloc' the size of the buffer if
it detects that the pipe could use a bit more room. However if it
failed the reallocation it could not cope and would panic. Fix
this by attempting to grow the pipe while holding onto our old
resources. If all goes well free the old resources and use the
new ones, otherwise continue to use the smaller buffer already
allocated.
While I'm here add a few blank lines for style(9) and remove
'register'.
other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
the pipe, then we were corrupting the pipe_zone free list by calling
pipeclose on rpipe twice. NULL out rpipe to avoid this.
Reviewed by: dillon
Reviewed by: iedowse
Pre-rfork code assumed inherent locking of a process's file descriptor
array. However, with the advent of rfork() the file descriptor table
could be shared between processes. This patch closes over a dozen
serious race conditions related to one thread manipulating the table
(e.g. closing or dup()ing a descriptor) while another is blocked in
an open(), close(), fcntl(), read(), write(), etc...
PR: kern/11629
Discussed with: Alexander Viro <viro@math.psu.edu>
fixee incoherency of pipe timestamps relative to file timestamps in
the usual case where getnanotime() is not used for the latter. (File
and pipe timestamps are still incoherent relative to real time unless
the vfs_timestamp_precision sysctl is set to 2 or 3).
1. Data written beyond end of pipe buffer, causing kernel memory corruption.
- Check that space is still valid after obtaining the pipe lock.
- Defer the calculation of transfer size until the pipe
lock has been obtained.
- Update the pipe buffer pointers while holding the pipe lock.
2. Writes of size <= PIPE_BUF not always atomic.
- Allow an internal write to span two contiguous segments,
so writes of size <= PIPE_BUF can be kept atomic
when wrapping around from the end to the start of the
pipe buffer.
PR: 15235
Reviewed by: Matt Dillon <dillon@FreeBSD.org>
Merge the contents (less some trivial bordering the silly comments)
of <vm/vm_prot.h> and <vm/vm_inherit.h> into <vm/vm.h>. This puts
the #defines for the vm_inherit_t and vm_prot_t types next to their
typedefs.
This paves the road for the commit to follow shortly: change
useracc() to use VM_PROT_{READ|WRITE} rather than B_{READ|WRITE}
as argument.
spaces which cross a segment boundry in the page table. pmap_kextract()
is not designed for access to the user space portion of the page
table and cannot handle the null-page-directory-entry case.
The fix is to have vm_fault_quick() return a success or failure which
is then used to avoid calling pmap_kextract().
far-reaching in fd-land, so you'll want to consult the code for
changes. The biggest change is that now, you don't use
fp->f_ops->fo_foo(fp, bar)
but instead
fo_foo(fp, bar),
which increments and decrements the fp refcount upon entry and exit.
Two new calls, fhold() and fdrop(), are provided. Each does what it
seems like it should, and if fdrop() brings the refcount to zero, the
fd is freed as well.
Thanks to peter ("to hell with it, it looks ok to me.") for his review.
Thanks to msmith for keeping me from putting locks everywhere :)
Reviewed by: peter
now used in f_ops in place of NULL, and modifications to the files
are more carefully ordered. f_ops should also be set to &badfileops
upon "close" of a file.
This does not fix other problems mentioned in this PR than the first
one.
PR: 11629
Reviewed by: peter
NetBSD compatible.
Add parameter to fo_read and fo_write. (The only flag FOF_OFFSET mean that
the offset is set in the struct uio).
Factor out some common code from read/pread/write/pwrite syscalls.
process to sneak in and write to or close the pipe. The read code
enters a 'piperd' state after doing the lock operation without
checking to see if the state changed, which can cause the process
to wait forever.
The code has also been documented more.
by bde, a few other tweaks to get the patch to apply cleanly again and
some improvements to the comments.
This change closes some fairly minor security holes associated with
F_SETOWN, fixes a few bugs, and removes some limitations that F_SETOWN
had on tty devices. For more details, see the description on the PR.
Because this patch increases the size of the proc and pgrp structures,
it is necessary to re-install the includes and recompile libkvm,
the vinum lkm, fstat, gcore, gdb, ipfilter, ps, top, and w.
PR: kern/7899
Reviewed by: bde, elvind
1) The vnode pager wasn't properly tracking the file size due to
"size" being page rounded in some cases and not in others.
This sometimes resulted in corrupted files. First noticed by
Terry Lambert.
Fixed by changing the "size" pager_alloc parameter to be a 64bit
byte value (as opposed to a 32bit page index) and changing the
pagers and their callers to deal with this properly.
2) Fixed a bogus type cast in round_page() and trunc_page() that
caused some 64bit offsets and sizes to be scrambled. Removing
the cast required adding casts at a few dozen callers.
There may be problems with other bogus casts in close-by
macros. A quick check seemed to indicate that those were okay,
however.
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.
The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
They are atomic, but return in essence what is in the "time" variable.
gettime() is now a macro front for getmicrotime().
Various patches to use the two new functions instead of the various
hacks used in their absence.
Some puntuation and grammer patches from Bruce.
A couple of XXX comments.
it in struct proc instead.
This fixes a boatload of compiler warning, and removes a lot of cruft
from the sources.
I have not removed the /*ARGSUSED*/, they will require some looking at.
libkvm, ps and other userland struct proc frobbing programs will need
recompiled.
pointy hat last? :-]
When one is selecting (or polling) for write, it helps if we use the
write side of the pipe when requesting wakeups instead of the read side.
This broke ghostview (at least) - I'm suprised it wasn't noticed for
so long.
Reviewed by: Greg Lehey <grog@lemis.com>
<sys/ttycom.h> and sometimes <sys/filio.h> instead of <sys/ioctl.h>
in miscellaneous files. Most of these files have nothing to do
with ttys but need to include <sys/ttycom.h> to get the definitions
of TIOC[SG]PGRP which are (ab)used to convert F[SG]ETOWN fcntls into
ioctls.
form `tv = time'. Use a new function gettime(). The current version
just forces atomicicity without fixing precision or efficiency bugs.
Simplified some related valid accesses by using the central function.
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.
The system boots and can mount UFS filesystems.
Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
Mount_std mounts will not work until the getfsent
library routine is changed.
Reviewed by: various people
Submitted by: Jeffery Hsu <hsu@freebsd.org>
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
Fixed initialization of pipe_pgid - don't default to pid 0 (swapper) for
SIGIO.
Added comments about other implicit initializations, mostly for struct
stat.
Fixed initialization of st_mode. S_IFSOCK was for when pipes were sockets.
It is probably safe to fix the bogus S_ISFIFO() now that pipes can be
distinguished from sockets in all cases.
Don't return ENOSYS for inappropriate ioctls.
fixes for previous version of new pipes from Bruce Evans. This
new version:
Supports more properly the semantics of select (BDE).
Supports "OLD_PIPE" correctly (kern_descrip.c, BDE).
Eliminates incorrect EPIPE returns (bash 'pipe broken' messages.)
Much faster yet, currently tuned relatively conservatively -- but now
gives approx 50% more perf than the new pipes code did originally.
(That was about 50% more perf than the original BSD pipe code.)
Known bugs outstanding:
No support for async io (SIGIO). Will be included soon.
Next to do:
Merge support for FIFOs.
Submitted by: bde
