Commit Graph

245 Commits

Author SHA1 Message Date
Andriy Voskoboinyk
a99bdc110b Fix compilation with 'option NDISAPI + device ndis' and
without 'device pccard' in the kernel config file.

PR:		171532
Reported by:	Robert Bonomi <bonomi@host128.r-bonomi.com>
MFC after:	1 week
2019-01-30 11:40:12 +00:00
Matt Macy
d7c5a620e2 ifnet: Replace if_addr_lock rwlock with epoch + mutex
Run on LLNW canaries and tested by pho@

gallatin:
Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5
based ConnectX 4-LX NIC, I see an almost 12% improvement in received
packet rate, and a larger improvement in bytes delivered all the way
to userspace.

When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1,
I see, using nstat -I mce0 1 before the patch:

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
4.98   0.00   4.42   0.00 4235592     33   83.80 4720653 2149771   1235 247.32
4.73   0.00   4.20   0.00 4025260     33   82.99 4724900 2139833   1204 247.32
4.72   0.00   4.20   0.00 4035252     33   82.14 4719162 2132023   1264 247.32
4.71   0.00   4.21   0.00 4073206     33   83.68 4744973 2123317   1347 247.32
4.72   0.00   4.21   0.00 4061118     33   80.82 4713615 2188091   1490 247.32
4.72   0.00   4.21   0.00 4051675     33   85.29 4727399 2109011   1205 247.32
4.73   0.00   4.21   0.00 4039056     33   84.65 4724735 2102603   1053 247.32

After the patch

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
5.43   0.00   4.20   0.00 3313143     33   84.96 5434214 1900162   2656 245.51
5.43   0.00   4.20   0.00 3308527     33   85.24 5439695 1809382   2521 245.51
5.42   0.00   4.19   0.00 3316778     33   87.54 5416028 1805835   2256 245.51
5.42   0.00   4.19   0.00 3317673     33   90.44 5426044 1763056   2332 245.51
5.42   0.00   4.19   0.00 3314839     33   88.11 5435732 1792218   2499 245.52
5.44   0.00   4.19   0.00 3293228     33   91.84 5426301 1668597   2121 245.52

Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch

Reviewed by:	gallatin
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
Brooks Davis
541d96aaaf Use an accessor function to access ifr_data.
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size).  This is believed to be sufficent to
fully support ifconfig on 32-bit systems.

Reviewed by:	kib
Obtained from:	CheriBSD
MFC after:	1 week
Relnotes:	yes
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D14900
2018-03-30 18:50:13 +00:00
Pedro F. Giffuni
ac2fffa4b7 Revert r327828, r327949, r327953, r328016-r328026, r328041:
Uses of mallocarray(9).

The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.

Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.

Reported by:	wosch
PR:		225197
2018-01-21 15:42:36 +00:00
Pedro F. Giffuni
26c1d774b5 dev: make some use of mallocarray(9).
Focus on code where we are doing multiplications within malloc(9). None of
these is likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.

This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
2018-01-13 22:30:30 +00:00
Pedro F. Giffuni
df57947f08 spdx: initial adoption of licensing ID tags.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

Initially, only tag files that use BSD 4-Clause "Original" license.

RelNotes:	yes
Differential Revision:	https://reviews.freebsd.org/D13133
2017-11-18 14:26:50 +00:00
Gleb Smirnoff
e8fd18f306 Shorten list of arguments to mbuf external storage freeing function.
All of these arguments are stored in m_ext, so there is no reason
to pass them in the argument list.  Not all functions need the second
argument, some don't even need the first one.  The second argument
lives in next cache line, so not dereferencing it is a performance
gain.  This was discovered in sendfile(2), which will be covered by
next commits.

The second goal of this commit is to bring even more flexibility
to m_ext mbufs, allowing to create more fields in m_ext, opaque to
the generic mbuf code, and potentially set and dereferenced by
subsystems.

Reviewed by:	gallatin, kbowling
Differential Revision:	https://reviews.freebsd.org/D12615
2017-10-09 20:35:31 +00:00
Gleb Smirnoff
33c6ba0c65 Fix regression in ndis(4) after r286410. This adds a bunch of checks for
whether this is a Ethernet or 802.11 device and does proper dereferencing.

PR:		213237
Submitted by:	<ota j.email.ne.jp>
MFC after:	2 weeks
2017-05-22 20:00:01 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Andriy Voskoboinyk
a061fea6ee net80211 + drivers: hide size of 'bands' array behind a macro.
Auto-replace 'howmany(IEEE80211_MODE_MAX, 8)' with 'IEEE80211_MODE_BYTES'.
No functional changes.
2016-04-29 22:14:11 +00:00
Pedro F. Giffuni
73a1170a8c sys/dev: use our nitems() macro when it is avaliable through param.h.
No functional change, only trivial cases are done in this sweep,
Drivers that can get further enhancements will be done independently.

Discussed in:	freebsd-current
2016-04-19 23:37:24 +00:00
Justin Hibbits
c47476d7e6 Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere().
Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count.  Migrate these to use the new bus_alloc_resource_anywhere() API.

Reviewed by:	jhb
Differential Revision:	https://reviews.freebsd.org/D5370
2016-02-27 03:38:01 +00:00
Andriy Voskoboinyk
0046e1868f net80211 drivers: fix ieee80211_init_channels() usage
Fix out-of-bounds read (all) / write (11n capable) for drivers
that are using ieee80211_init_channels() to initialize channel list.

Tested with:
 * RTL8188EU, STA mode.
 * RTL8188CUS, STA mode.
 * WUSB54GC, HOSTAP mode.

Approved by:	adrian (mentor)
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D4818
2016-01-07 18:41:03 +00:00
Gleb Smirnoff
7ec44a9567 Fix regression in if_ndis in r280347.
Submitted by:	avos
Reported by:	Ev Bogdanov <evbogdanov yahoo.com>
Tested by:	Ivan Kormachev <ikormachev depit.ru>
MFC after:	3 days
2015-12-17 21:01:19 +00:00
Adrian Chadd
bc813c40bf net80211: drop redundant 3rd parameter from iv_key_set().
The MAC can be fetched from the key struct.

I added the ndis updates to make it compile.

Submitted by:	<s3erios@gmail.com>
Differential Revision:	https://reviews.freebsd.org/D3657
2015-10-03 21:48:27 +00:00
Gleb Smirnoff
7a79cebfba Replay r286410. Change KPI of how device drivers that provide wireless
connectivity interact with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
  the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
  driver about any changes: number of wlan(4) interfaces, number of them
  in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
  driver experiences errors and can not attribute them to any specific
  interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
  now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.

Reviewed by:	adrian
Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-08-27 08:56:39 +00:00
Adrian Chadd
ba2c1fbc03 Revert the wifi ifnet changes until things are more baked and tested.
* 286410
* 286413
* 286416

The initial commit broke a variety of debug and features that aren't
in the GENERIC kernels but are enabled in other platforms.
2015-08-08 01:10:17 +00:00
Gleb Smirnoff
79d2c5e857 Change KPI of how device drivers that provide wireless connectivity interact
with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
  the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
  driver about any changes: number of wlan(4) interfaces, number of them
  in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
  driver experiences errors and can not attribute them to any specific
  interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
  now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@,
op@ and lev@, who also participated in testing. Details here:

https://wiki.freebsd.org/projects/ifnet/net80211

Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not
tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances
of problems are low. The wtap wasn't compilable even before this change.
But the ndis driver is complex, and it is likely to be broken with this
commit. Help with testing and debugging it is appreciated.

Differential Revision:	D2655, D2740
Sponsored by:	Nginx, Inc.
Sponsored by:	Netflix
2015-08-07 11:43:14 +00:00
Gleb Smirnoff
272f6ade9b Change three methods in struct ieee80211com, namely ic_updateslot,
ic_update_mcast and ic_update_promisc, to pass pointer to the ieee80211com,
not to the ifnet.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 19:53:29 +00:00
Gleb Smirnoff
59686fe935 Set ic_softc in all 802.11 drivers. Not required right now, but will be
used quite soon.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 18:50:26 +00:00
Gleb Smirnoff
c8550c0278 Make net80211 drivers supply their device name to the net80211 layer, so
that the latter doesn't need to go through struct ifnet to get their name.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2015-05-25 13:51:13 +00:00
Jung-uk Kim
fd90e2ed54 CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten
years for head.  However, it is continuously misused as the mpsafe argument
for callout_init(9).  Deprecate the flag and clean up callout_init() calls
to make them more consistent.

Differential Revision:	https://reviews.freebsd.org/D2613
Reviewed by:	jhb
MFC after:	2 weeks
2015-05-22 17:05:21 +00:00
Adrian Chadd
2808a02bf4 Prepare for supporting driver-overridden curchan when submitting scan
results.

Right now the scan infrastructure assumes the channel is under net80211
control, and that when receiving beacon frames for scanning, the
current channel is indeed what ic_curchan is set to.

But firmware NICs with firmware scan support need more than this -
they can do background scans whilst hiding the off-channel behaviour
from net80211.  Ie, net80211 still thinks everything is associated
and on the main channel, but it's getting scan results from all the
background traffic.

However sta_add() pays attention to ic_curchan and discards scan
results that aren't on the right channel.  CCK beacon frames can be
decoded from adjacent channels so the receive path and sta_add
discard these as appropriate.  This is fine for software scanning
like for ath(4), but not for firmware NICs.  So with those, the
whole concept of background firmware scanning won't work without
major hacks (eg, overriding ic_curchan before calling the beacon
input / scan add.)

As part of my scan overhaul, modify sta_add() and the scan_add()
APIs to take an explicit current channel.  The normal RX path
will set it to ic_curchan so it's a no-op.  However, drivers may
decide to (eventually!) override the scan method to set the
"right" current channel based on what the firmware reports the
scan state is.

So for example, iwn, rsu and other NICs will eventually do this:

* driver issues scan start firmware command;
* firmware sends a "scan start on channel X" notify;
* firmware sends a bunch of beacon RX's as part of
  the scan results;
* .. and the driver will replace scan_add() curchan with channel X,
  so scan results are correct.
* firmware sends a "scan start on channel Y" notify;
* firmware sends more beacons...
* .. the driver replaces scan_add() curchan with channel Y.

Note:

* Eventually, net80211 should eventually grow the idea of a per-packet
  current channel.  It's possible in various modes (eg WAVE, P2P, etc)
  that individual frames can come in from different channels and that
  is under firmware control rather than driver/net80211 control, so
  we should support that.
2015-05-10 22:07:53 +00:00
Alexander Motin
6f954fb36b Remove MAXBSIZE use from drivers where it has nothing to do.
In some cases limits are just not needed, in others -- DFLTPHYS is the
right constant to use instead.

MFC after:	1 month
2015-03-22 16:10:28 +00:00
Gleb Smirnoff
c8dfaf382f Mechanically convert to if_inc_counter(). 2014-09-19 03:51:26 +00:00
John Baldwin
d9abd30d22 When anouncing link state changes on an 802.11 interface with a vap,
announce the change on the vap's ifnet instead of the main ifnet.  This
matches the behavior of other wireless drivers in the tree and allows the
default devd configuration to correctly start dhclient automatically after
an ndis wireless device associates.

MFC after:	2 weeks
2014-08-29 22:01:47 +00:00
Gleb Smirnoff
c3322cb91c Include necessary headers that now are available due to pollution
via if_var.h.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-28 07:29:16 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Andre Oppermann
bb25e5ab00 Give (*ext_free) an int return value allowing for very sophisticated
external mbuf buffer management capabilities in the future.

For now only EXT_FREE_OK is defined with current legacy behavior.

Sponsored by:	The FreeBSD Foundation
2013-08-25 10:57:09 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Scott Long
b6f97155cc Convert a number of drivers to obtaining their parent DMA tag from their
PCI device attachment.
2012-03-12 08:03:51 +00:00
Kevin Lo
5bbe0c5357 ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it again
Reviewed by:	yongari
2012-01-07 09:41:57 +00:00
Dimitry Andric
54a55725a3 In sys/dev/if_ndis/if_ndis_pccard.c, fix a bug where a garbage rid was
passed to resource_list_add().  The rid that was just returned by
bus_alloc_resource_any() should have been used instead.

Reviewed by:	jhb
MFC after:	1 week
2012-01-03 18:40:41 +00:00
Bernhard Schmidt
fcd9500f91 Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
  compiler warnings

Submitted by:	arundel@
2011-12-17 10:23:17 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Andrew Thompson
d929b72e23 Revert the ndis part of r212122, windrv_stub.c already adds a MODULE_VERSION
and this breaks loading miniport drivers from loader.conf

Reported by:	Yuri <yuri^rawbw^com>
Submitted by:	Paul B Mahol
MFC after:	3 days
2011-01-22 21:33:18 +00:00
Bernhard Schmidt
750647ad62 Don't try to free an unassigned pointer.
Submitted by:	Paul B Mahol <onemda at gmail.com>
MFC after:	1 week
2011-01-07 18:41:59 +00:00
Tijl Coosemans
4485b7e74a Fix a bug introduced in r216518. The ndis_subsys field holds the PCI
subdevice ID in addition to the subvendor ID.

Reported by:	Paul B Mahol 'onemda gmail com'
Approved by:	kib (mentor)
2010-12-19 11:14:34 +00:00
Tijl Coosemans
0e4e9e170c Use convenience functions where possible instead of accessing the PCI
configuration registers directly.

Remove pci_enable_io calls where they are redundant. The PCI bus driver
will set the right bits when the corresponding bus resource is activated.

Remove redundant pci_* function calls from suspend/resume methods. The
bus driver already saves and restores the PCI configuration.

Reviewed by:	jhb
Approved by:	kib (mentor)
2010-12-18 14:21:28 +00:00
John Baldwin
7f3384ab34 Use bus_alloc_resource_any() instead of bus_alloc_resource(). Besides being
cleaner, this fixes problems where the code was using ~0 instead of ~0ul
for the upper bound on "any" resources.

MFC after:	1 month
2010-12-16 15:19:32 +00:00
Bernhard Schmidt
96a911f614 There is no reason to call rt_ifmsg(), remove it.
Submitted by:	Paul B Mahol <onemda at gmail.com>
MFC after:	1 week
2010-10-19 19:11:36 +00:00
Rui Paulo
a6d8c83fd9 WPA_CSE_WEP104 was being incorrectly checked.
Found with:	clang
2010-10-13 14:37:52 +00:00
Andrew Thompson
910cb8feb9 Add missing MODULE_VERSION() definitions, this resolves problems around
duplicate module loads.

PR:		usb/125736
Submitted by:	danger, mm
Reviewed by:	hselasky
2010-09-01 23:47:53 +00:00
Martin Blapp
c2ede4b379 Remove extraneous semicolons, no functional changes.
Submitted by:	Marc Balmer <marc@msys.ch>
MFC after:	1 week
2010-01-07 21:01:37 +00:00
Rui Paulo
7edea21b22 len must be int, not size_t
Submitted by:	novel
2010-01-06 13:13:14 +00:00
Rui Paulo
ab925d255d Add net80211 media status reporting.
PR:		142197
Submitted by:	Paul <onemda at gmail.com>
2010-01-05 22:59:59 +00:00
Andrew Thompson
f1ea98c024 Set correct USB device description
Submitted by:	Paul B Mahol
2009-12-22 02:04:16 +00:00
Rui Paulo
2d7340428b Pass all IEs to net80211.
PR:		141376
Submitted by:	Paul <onemda at gmail.com>
MFC after:	1 week
2009-12-14 18:43:27 +00:00
John Baldwin
6b5ba0bba3 ndis_scan_results() can sleep if the scan results are not ready when
ndis_scan() is called.  However, ndis_scan() is invoked from softclock()
and cannot sleep.  Move ndis_scan_results() to the ndis' driver's scan_end
hook instead.

Submitted by:	Paul B Mahol  onemda of gmail
MFC after:	1 week
2009-12-02 16:26:18 +00:00
Rui Paulo
99081d1c61 Big style cleanup. While there remove references to FreeBSD versions
older than 6.0.

Submitted by:	Paul B Mahol <onemda at gmail.com>
2009-11-02 11:07:42 +00:00