block copy, when copying the superblock into the snapshot. UFS1 does
not align superblock on the block boundary, and bcopy runs off the end
of the buffer.
Reported by: Andre Albsmeier <Andre.Albsmeier@siemens.com>
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
vfs_busy(mp);
vfs_write_suspend(mp);
which are problematic if other thread starts unmount between two
calls. The unmount starts a write, while vfs_write_suspend() drain
writers. On the other hand, unmount drains busy references, causing
the deadlock.
Add a flag argument to vfs_write_suspend and require the callers of it
to specify VS_SKIP_UNMOUNT flag, when the call is performed not in the
mount path, i.e. the covered vnode is not locked. The suspension is
not attempted if VS_SKIP_UNMOUNT is specified and unmount is in
progress.
Reported and tested by: Andreas Longwitz <longwitz@incore.de>
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Revert the simplification of the i_gen calculation.
It is still a good idea to avoid zero values and for the case
of old filesystems there is probably no advantage in using
the complete 32 bits anyways.
Discussed with: bde
MFC after: 4 weeks
Further simplify the i_gen calculation for older disks.
Having a zero here is not really a problem and this is more
similar to what is done in newfs_random().
Reported by: Xin Li
MFC after: 4 weeks
defined by <sys/dirent.h>
Always start parsing at DIRBLKSIZ aligned offset, skip first entries if
uio_offset is not DIRBLKSIZ aligned. Return EINVAL if buffer is too
small for single entry.
Preallocate buffer for cookies. Cookies will be replaced with d_off
field in struct dirent at later point.
Skip entries with zero inode number.
Stop mangling dirent in ufs_extattr_iterate_directory().
Reviewed by: kib
Sponsored by: Google Summer Of Code 2011
In UFS, i_gen is a random generated value and there is not way for
it to be negative. Actually, the value of i_gen is just used to
match bit patterns and it is of not consequence if the values are
signed or not.
Following other filesystems, set it to unsigned and use it as such,
Discussed by: mckusick
Reviewed by: mckusick (previous version)
MFC after: 4 weeks
- Use a shared bufobj lock in getblk() and inmem().
- Convert softdep's lk to rwlock to match the bufobj lock.
- Move INFREECNT to b_flags and protect it with the buf lock.
- Remove unnecessary locking around bremfree() and BKGRDINPROG.
Sponsored by: EMC / Isilon Storage Division
Discussed with: mckusick, kib, mdf
an error. One could argue that returning a buffer even when it is
not valid is incorrect, but bread has always returned a buffer
valid or not.
Reviewed by: kib
MFC after: 2 weeks
the return value is NULL. Based on the returned flags, the
return value should never be inspected in the case where NULL
is returned, but it is good coding practice not to return a
pointer to freed memory.
Found by: Coverity Scan, CID 1006096
Reviewed by: kib
MFC after: 2 weeks
- Don't insert BKGRDMARKER bufs into the splay or dirty/clean buf lists.
No consumers need to find them there and it complicates the tree.
These flags are all FFS specific and could be moved out of the buf
cache.
- Use pbgetvp() and pbrelvp() to associate the background and journal
bufs with the vp. Not only is this much cheaper it makes more sense
for these transient bufs.
- Fix the assertions in pbget* and pbrel*. It's not safe to check list
pointers which were never initialized. Use the BX flags instead. We
also check B_PAGING in reassignbuf() so this should cover all cases.
Discussed with: kib, mckusick, attilio
Sponsored by: EMC / Isilon Storage Division
in the pagedep and inodedep hash tables. An entry in the table is
skipped because 'pagedep_hash' and 'inodedep_hash' hold the size
of the hash tables - 1.
The chance that this would have any operational failure is extremely
unlikely. These funtions only need to find a single entry and are
only called when there are too many entries. The chance that they
would fail because all the entries are on the single skipped hash
chain are remote.
Submitted by: Pedro Martelletto
Reviewed by: kib
MFC after: 2 weeks
running time for a full fsck. It also reduces the random access time
for large files and speeds the traversal time for directory tree walks.
The key idea is to reserve a small area in each cylinder group
immediately following the inode blocks for the use of metadata,
specifically indirect blocks and directory contents. The new policy
is to preferentially place metadata in the metadata area and
everything else in the blocks that follow the metadata area.
The size of this area can be set when creating a filesystem using
newfs(8) or changed in an existing filesystem using tunefs(8).
Both utilities use the `-k held-for-metadata-blocks' option to
specify the amount of space to be held for metadata blocks in each
cylinder group. By default, newfs(8) sets this area to half of
minfree (typically 4% of the data area).
This work was inspired by a paper presented at Usenix's FAST '13:
www.usenix.org/conference/fast13/ffsck-fast-file-system-checker
Details of this implementation appears in the April 2013 of ;login:
www.usenix.org/publications/login/april-2013-volume-38-number-2.
A copy of the April 2013 ;login: paper can also be downloaded
from: www.mckusick.com/publications/faster_fsck.pdf.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 4 weeks
we need to call ufs_checkpath() to walk from our new location to
the root of the filesystem to ensure that we do not encounter
ourselves along the way. Until now, we accomplished this by reading
the ".." entries of each directory in our path until we reached
the root (or encountered an error). This change tries to avoid the
I/O of reading the ".." entries by first looking them up in the
name cache and only doing the I/O when the name cache lookup fails.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 4 weeks
cluster_write() and cluster_wbuild() functions. The flags to be
allowed are a subset of the GB_* flags for getblk().
Sponsored by: The FreeBSD Foundation
Tested by: pho
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.
The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
- VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
- VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
- VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
- VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
(in order to avoid visibility of implementation details)
- The read-mode operations are added:
VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
sys/mutex.h in consumers directly to cater its inlining functions
using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
the compat layer because the name clash between FreeBSD and solaris
versions must be avoided.
At this purpose zfs redefines the vm_object locking functions
directly, isolating the FreeBSD components in specific compat stubs.
The KPI results heavilly broken by this commit. Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff
Reviewed by: pjd (ZFS specific review)
Discussed with: alc
Tested by: pho
Current dqflush() panics when a dquot with with non-zero refcount is
encountered. The situation is possible, because quotas are turned off
before softdep workitem queue if flushed, due to the quota file writes
might create softdep workitems.
Make the encountering an active dquot in dqflush() not fatal, return
the error from quotaoff() instead. Ignore the quotaoff() failures
when ffs_flushfiles() is called in the course of softdep_flushfiles()
loop, until the last iteration. At the last loop, the quotas must be
closed, and because SU workitems should be already flushed, the
references to dquot are gone.
Sponsored by: The FreeBSD Foundation
Reported and tested by: pho
Reviewed by: mckusick
MFC after: 2 weeks
The order is inode buffer lock -> snaplk -> cg buffer lock, reversing
the order causes deadlocks.
Inode block must not be written while cg block buffer is owned. The
FFS copy on write needs to allocate a block to copy the content of the
inode block, and the cylinder group selected for the allocation might
be the same as the owned cg block. The reserved block detection code
in the ffs_copyonwrite() and ffs_bp_snapblk() is unable to detect the
situation, because the locked cg buffer is not exposed to it.
In order to maintain the dependency between initialized inode block
and the cg_initediblk pointer, look up the inode buffer in
non-blocking mode. If succeeded, brelse cg block, initialize the inode
block and write it. After the write is finished, reread cg block and
update the cg_initediblk.
If inode block is already locked by another thread, let the another
thread initialize it. If another thread raced with us after we
started writing inode block, the situation is detected by an update of
cg_initediblk. Note that double-initialization of the inode block is
harmless, the block cannot be used until cg_initediblk is incremented.
Sponsored by: The FreeBSD Foundation
In collaboration with: pho
Reviewed by: mckusick
MFC after: 1 month
X-MFC-note: after r246877
When a cylinder group runs short of inodes, a new block for inodes is
allocated, zero'ed, and written to the disk. The zero'ed inodes must
be on the disk before the cylinder group can be updated to claim them.
If the cylinder group claiming the new inodes were written before the
zero'ed block of inodes, the system could crash with the filesystem in
an unrecoverable state.
Rather than adding a soft updates dependency to ensure that the new
inode block is written before it is claimed by the cylinder group
map, we just do a barrier write of the zero'ed inode block to ensure
that it will get written before the updated cylinder group map can
be written. This change should only slow down bulk loading of newly
created filesystems since that is the primary time that new inode
blocks need to be created.
Reported by: Robert Watson
Reviewed by: kib
Tested by: Peter Holm
function, implementing the sysctl vfs.ffs.set_bufoutput (not used in
the tree yet).
- The current directory vnode dereference is unsafe since fd_cdir
could be changed and unreferenced, lock the filedesc around and vref
the fd_cdir.
- The VTOI() conversion of the fd_cdir is unsafe without first
checking that the vnode is indeed from an FFS mount, otherwise
the code dereferences a random memory.
- The cdir could be reclaimed from under us, lock it around the
checks.
- The type of the fp vnode might be not a disk, or it might have
changed while the thread was in flight, check the type.
Reviewed and tested by: mckusick
MFC after: 2 weeks
has gone below zero after the blocks in its inode are freed is a
no-op which the compiler fails to warn about because of the use of
the DIP macro. Change the sanity check to compare the number of
blocks being freed against the value i_blocks. If the number of
blocks being freed exceeds i_blocks, just set i_blocks to zero.
Reported by: Pedro Giffuni (pfg@)
MFC after: 2 weeks
mount, which means that is must not be called while the snaplock is
owned. The vfs_write_resume(9) does call the function as the
VFS_SUSP_CLEAN() method, which is too early and falls into the region
still protected by snaplock.
Add yet another flag for the vfs_write_resume_flags() to avoid calling
suspension cleanup handler after the suspend is lifted, and use it in
the ffs_snapshot() call to vfs_write_resume.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
the write start, by adding a variation of the vfs_write_resume(9)
which accepts flags.
Use the new function to prevent a deadlock between parallel suspension
and snapshotting a UFS mount. The ffs_snapshot() code performed
vfs_write_resume() followed by vn_start_write() while owning the
snaplock. If the suspension intervene between resume and
vn_start_write(), the deadlock occured after the suspending thread
tried to lock the snaplock, most typically during the write in the
ffs_copyonwrite().
Reported and tested by: Andreas Longwitz <longwitz@incore.de>
Reviewed by: mckusick
MFC after: 2 weeks
X-MFC-note: make the vfs_write_resume(9) function a macro after the MFC,
in HEAD
When kern_yield() was introduced with the possibility to specify
a new priority, the behaviour changed by not lowering priority at all
in the consumers, making the yielding mechanism highly ineffective for
high priority kthreads like bufdaemon, syncer, vlrudaemon, etc.
There are no evidences that consumers could bear with such change in
semantic and this situation could finally lead to bugs similar to the
ones fixed in r244240.
Re-specify userland pri for kthreads involved.
Tested by: pho
Reviewed by: kib, mdf
MFC after: 1 week
received granular locking) but the comment present in UFS has been
copied all over other filesystems code incorrectly for several times.
Removes comments that makes no sense now.
Reviewed by: kib
MFC after: 3 days
crash. When truncating a file that never made it to disk we use the
canceled allocation dependencies to hold the journal records until
the truncation completes. Previously allocdirect dependencies on
the id_bufwait list were not considered and their journal space
could expire before the bitmaps were written. Cancel them and attach
them to the freeblks as we do for other allocdirects.
- Add KTR traces that were used to debug this problem.
- When adding jsegdeps, always use jwork_insert() so we don't have more
than one segdep on a given jwork list.
Sponsored by: EMC / Isilon Storage Division
When a background copy of a cg is written we complete any work associated
with that bmsafemap. If new work has been added to the non-background
copy of the buffer it will be completed before the next write happens.
The solution is to do the rollbacks when we make the copy so only those
dependencies that were present at the time of writing will be completed
when the background write completes. This would've resulted in various
bitmap related corruptions and panics. It also would've expired journal
entries early causing journal replay to miss some records.
MFC after: 2 weeks
solve power loss problems with dishonest write caches. However, it
should improve the situation and force a full fsck when it is unable
to resolve with the journal.
- Resolve a case where the journal could wrap in an unsafe way causing
us to prematurely lose journal entries in very specific scenarios.
Discussed with: mckusick
MFC after: 1 month
