been extensively tested. And the ELF64 stuff likely is not quite
right...
# There's a lot of cut-n-paste code here that could easily be
# refactored, at least for FreeBSD syscalls.
Because we now have a reliable library function that converts file
descriptors to character device names, let stat(1) use this. This means
it can now do the following:
$ stat -f %N
/dev/pts/0
I've changed main() to set file properly, so output() is never called
with file set to NULL.
Approved by: dougb (older version, still used devname)
than was read. This seems to have only affected the shar
writer, since other formats proactively truncate output
to the originally-advertised size.
PR: bin/131244
MFC after: 7 days
src/usr.bin/usbhidctl/usbhid.c
src/sys/dev/usb2/include/usb2_hid.h
src/sys/dev/usb2/input/uhid2.c
src/lib/libusbhid/Makefile
src/lib/libusbhid/descr.c
src/lib/libusbhid/descr_compat.c
src/lib/libusbhid/usbhid.3
src/lib/libusbhid/usbhid.h
src/lib/libusbhid/usbvar.h
Patches to make libusbhid and HID userland utilities compatible with
the new USB stack. All HID ioctls should go through the libusbhid
library to ensure compatibility. I have found at least one piece of
software in /usr/ports which needs to get updated before USB HID
devices will work. This is the X joystick input driver.
Reported and tested by:
Daichi GOTO and Masanori OZAWA.
src/sys/dev/usb2/core/usb2_process.c
Correct USB process names.
Reported by:
Andre Guibert de Bruet
src/sys/dev/usb2/serial/uftdi2.c
Integrate changes from old USB stack.
Submitted by: hps
from the inet6 stack along with statistics and make sure we
properly free the rt in all cases.
While the current situation is not better performance wise it
prevents panics seen more often these days.
After more inet6 and ipsec cleanup we should be able to improve
the situation again passing the rt to ip6_forward directly.
Leave the ip6_forward_rt entry in struct vinet6 but mark it
for removal.
PR: kern/128247, kern/131038
MFC after: 25 days
Committed from: Bugathon #6
Tested by: Denis Ahrens <denis@h3q.com> (different initial version)
that are much larger than expected (given the default size).
Change "smaller files" to "split files" which is more in line
with what "-b" actually does.
PR: 119329
Submitted by: Julian Stacey <jhs@berklix.org>
This gets rid of gnu89 style inlining. Also silence gcc by assigning two
variables NULL. This lets use to remove NO_WERROR.
Approved by: kib (mentor)
Approved by: harti
T_secs already had a non-zero default. Unbreak by moving the default to
ftp_timeout / http_timeout.
Submitted by: Christoph Mallon <christoph.mallon@gmx.de>
MFC after: 2 weeks
The name `aux' is reserved on Windows file systems. aux.c in the mail(1)
directory contains some random utility functions. I'm renaming this file
to util.c to make it possible to check out this directory on Windows.
MFC after: 1 month
argument. Before this fix, after searching the currently-running kernel,
we would still search the a.out argument - completely override the in-kernel
list, essentially defeating the K flag's purpose.
PR: 47387
Submitted by: Ryan Beasley <ryanb@goddamnbastard.org>
fetch a complete CVS repository. Support for rsync update of regular files are
also included, but are not yet enabled. The change should not have an impact on
existing csup usage, as little of the existing code has changed.
E.g., .MAKE.JOB.PREFIX=${.newline}---[${.MAKE.PID}]
would produce
---[1234] target ---
2. Added ${.newline} as a simple means of being able to include '\n' in the
assignment of .MAKE.JOB.PREFIX
Obtained from: NetBSD
In particular, point out that string comparison can only use != and ==
(how weird, given that the underlying call to strcmp returns more
information), that floating point values are correctly interpreted
as numbers, and that the left-hand side must be a variable expansion.
MFC after: 3 weeks
followed by 'f' or 'p', use the following or preceding month of that
number, respectively. Document this. Also includes other minor
grammatical and punctuation fixes to the manual page (capitalize
Easter, etc.).
MFC after: 1 month
owned by the current user. If kinfo_getfile() or kinfo_getvmmap() return
NULL, simply exit, and do not try and derefernce the memory.
Reviewed by: peter
Approved by: peter
rather than usually returning 1 but in a few instances using a sysexits(3)
return value.
2. Remove a few unused variables from libfetch.
PR: docs/122470 (1, only)
Reviewed by: des
fetch(1) accepts a new argument -i <file> that if specified will cause
the file to be downloaded only if it is more recent than the mtime of
<file>.
libfetch(3) accepts the mtime in the url structure and a flag to
indicate when this behavior is desired.
PR: bin/87841
Submitted by: Jukka A. Ukkonen <jau@iki.fi> (partially)
Reviewed by: des, ru
MFC after: 3 weeks
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
This change was erronously ommitted from the r185690, and attempt
to simply add the prototype to string.h has revealed that several
contributed programs defined local prototypes for strndup(), controlled
by autoconfed config.h. So, manually change #undef HAVE_STRNDUP to
#define HAVE_STRNDUP 1. Next import of the corresponding program would
regenerate config.h, overriding the changes in this commit.
No objections from: kan
wc utility. The -L option can be used to report the length of
the longest line wc has seen in one or more files. It is
disabled by default, and wc uses the standard `-lwc'.
Submitted by: Sheldon Givens, sheldon at sigsegv.ca
Reviewed by: kib
MFC after: 1 week
This changes struct kinfo_filedesc and kinfo_vmentry such that they are
same on both 32 and 64 bit platforms like i386/amd64 and won't require
sysctl wrapping.
Two new OIDs are assigned. The old ones are available under
COMPAT_FREEBSD7 - but it isn't that simple. The superceded interface
was never actually released on 7.x.
The other main change is to pack the data passed to userland via the
sysctl. kf_structsize and kve_structsize are reduced for the copyout.
If you have a process with 100,000+ sockets open, the unpacked records
require a 132MB+ copyout. With packing, it is "only" ~35MB. (Still
seriously unpleasant, but not quite as devastating). A similar problem
exists for the vmentry structure - have lots and lots of shared libraries
and small mmaps and its copyout gets expensive too.
My immediate problem is valgrind. It traditionally achieves this
functionality by parsing procfs output, in a packed format. Secondly, when
tracing 32 bit binaries on amd64 under valgrind, it uses a cross compiled
32 bit binary which ran directly into the differing data structures in 32
vs 64 bit mode. (valgrind uses this to track file descriptor operations
and this therefore affected every single 32 bit binary)
I've added two utility functions to libutil to unpack the structures into
a fixed record length and to make it a little more convenient to use.
* Lookup uname/gname if not provided by the archive (I copied the
uname/gname lookup cache from bsdtar)
* Format device number instead of size for device nodes
* Format date.
There's still a few improvements that I could copy from
bsdtar, especially the locale-aware safe_fprintf() code
and the locale-aware setup for day_first date formatting.
(And, of course, I need to think through a clean way to
push this stuff down into libarchive.)
Thanks to Peter Wemm for reminding me of this overlooked TODO item.
are safe to print, try to take into account the current locale.
This iterates over output strings using mbtowc() to identify
multi-byte sequences. If iswprint() claims the corresponding
wide character is printable, the original bytes are passed
through. Otherwise, we expand characters into C-style
\-escape sequences.
Submitted by: Michihiro NAKAJIMA
MFC after: 30 days
Bring in updated jail support from bz_jail branch.
This enhances the current jail implementation to permit multiple
addresses per jail. In addtion to IPv4, IPv6 is supported as well.
Due to updated checks it is even possible to have jails without
an IP address at all, which basically gives one a chroot with
restricted process view, no networking,..
SCTP support was updated and supports IPv6 in jails as well.
Cpuset support permits jails to be bound to specific processor
sets after creation.
Jails can have an unrestricted (no duplicate protection, etc.) name
in addition to the hostname. The jail name cannot be changed from
within a jail and is considered to be used for management purposes
or as audit-token in the future.
DDB 'show jails' command was added to aid debugging.
Proper compat support permits 32bit jail binaries to be used on 64bit
systems to manage jails. Also backward compatibility was preserved where
possible: for jail v1 syscalls, as well as with user space management
utilities.
Both jail as well as prison version were updated for the new features.
A gap was intentionally left as the intermediate versions had been
used by various patches floating around the last years.
Bump __FreeBSD_version for the afore mentioned and in kernel changes.
Special thanks to:
- Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches
and Olivier Houchard (cognet) for initial single-IPv6 patches.
- Jeff Roberson (jeff) and Randall Stewart (rrs) for their
help, ideas and review on cpuset and SCTP support.
- Robert Watson (rwatson) for lots and lots of help, discussions,
suggestions and review of most of the patch at various stages.
- John Baldwin (jhb) for his help.
- Simon L. Nielsen (simon) as early adopter testing changes
on cluster machines as well as all the testers and people
who provided feedback the last months on freebsd-jail and
other channels.
- My employer, CK Software GmbH, for the support so I could work on this.
Reviewed by: (see above)
MFC after: 3 months (this is just so that I get the mail)
X-MFC Before: 7.2-RELEASE if possible
fchdir() to return back to the parent. If those fail,
we're just dead in the water. Add a new error value
TREE_ERROR_FATAL to indicate that directory traversal
cannot continue. Have write.c honor that by exiting
immediately.
MFC after: 30 days
that should result in a non-zero return value.
In particular, this should address the issue that David Wolfskill
ran into with a somewhat flaky NFS mount resulting in a damaged
archive even though tar returned success.
MFC after: 4 days
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
specification and regression test regress:25.
"A function can be preceded by one or more '!' characters, in which
case the function shall be applied if the addresses do not select
the pattern space."
MFC after: 2 weeks
subtle why it comes out the way it does. Once you realize that it
depends on the archiving order, it's also important to realize that
filesystem differences aren't going to break this case. (Some of the
other tests have had to be extensively rewritten to make them
independent of the order in which a particular filesystem returns file
entries.)
(This commit also serves to note the PR number that I accidentally
omitted from the previous commit.)
PR: bin/128562
MFC after: 30 days
good job writing this test; it exercises a lot of subtle cases. The
trickiest one is that a hardlink to something that didn't get
extracted should not itself be extracted. In some sense, this is not
the desired behavior (we'd rather restore the file), but it's the best
you can do in a single-pass restore of a tar archive.
The test here should be extended to exercise cpio and newc formats as
well, since their hardlink models are different, which will lead to
different handling of some of these edge cases.
Submitted by: Jaakko Heinonen
MFC after: 30 days
parenthesized subexpression is defined. For example, the
following command line caused unexpected behavior like
segmentation fault:
% echo test | sed -e 's/test/\1/'
PR: bin/126682
MFC after: 1 week
This replaces the getopt()/getopt_long() wrapper, the old-style
argument rewriter and the associated configuration glue with a more
straightforward custom command parser. In particular, this ensures
that bsdtar will have consistent option parsing on every platform,
regardless of whether the platform supports getopt_long().
MFC after: 30 days
-A Display the apparent size instead of the disk usage. This can be
helpful when operating on compressed volumes or sparse files.
-B blocksize
Calculate block counts in blocksize byte blocks. This is differ-
ent from the -k, -m options or setting BLOCKSIZE and gives an
estimate of how much space the examined file hierachy would
require on a filesystem with the given blocksize. Unless in -A
mode, blocksize is rounded up to the next multiple of 512.
The former is similar to GNU's du(1) --apparent-size. The latter is
different from what GNU's du(1) -B does, which is equivalent to setting
BLOCKSIZE in our implementation and is rather pointless as it doesn't add
any real value (i.e. you can achieve the same with a simple awk-script).
No change in the normal output or processing.
Reviewed by: keramida@, Peter French
Otherwise silience from: freebsd-hackers@
from Jaakko's original patch: I have misgivings about the portability
of the 'z' printf modifier so opted to cast the arguments to (int)
instead.
PR: bin/128561
Submitted by: Jaakko Heinonen
MFC after: 30 days
Use ioctl() to get the window size in vmstat(8), and force a new
header to be prepended to the output every time the current window
size changes. Change the number of lines before each header to the
current lines of the terminal when the terminal is resized, so that
the full terminal length can be used for output lines.
Inspired by: svn change 175562 (same feature for iostat)
Reviewed by: ru (who fixed some of my bugs too)
MFC after: 1 week
control over the result of buildworld and installworld; this especially
helps packaging systems such as nanobsd
Reviewed by: various (posted to arch)
MFC after: 1 month
script mode like the MRI(Microtec Research Inc.) "librarian" program.
Originally this option is provided by Binutils ar(1) to ease the
transition for developers who are used to writing "librarian" scripts.
We added this option to BSD ar(1) because:
1. Further improve the compatibility with Binutils ar(1).
2. There are still a few software using this -M option. (at least one
in our ports collection)
Suggested by: rink & erwin
HAVE_STRUCT_STAT_ST_FLAGS, Linux support depends on the
existence of the appropriate ioctl() options. In particular,
this should fix some nagging compile errors on Linux platforms
that don't have e2fsprogs-devel installed.
In particular:
* tar -x -P follows symlinks to existing dirs, but not without -P
* symlinks to files are always replaced
* broken symlinks are always replaced
After the MPSAFE TTY import we support an additional rlimit, called
RLIMIT_NPTS. This limit allows you to cap the amount of pseudo-terminals
allocated by one user.
We forgot to add support for this limit to limits(1), which means it
crashed. Add the proper bits to make it work like it should.
Unfortunately not all shells actually implement the RLIMIT, so
unfortunately I suspect it to be broken with certain shells.
Submitted by: Yuriy Tsibizov <yuriy tsibizov gfk ru>
for the convenience of rc.d. Now it has happily lived there for quite
a while. So move the pkill(1) source files from usr.bin to bin, too.
Approved by: gad
file with different permissions and set a non-zero umask
during the actual copy tests. The extra entry increases
the size of the test archives of course, so adjust the
expected sizes.
backslash if he/she wants to use a non-traditional delimiter, i.e.,
anything other than a slash. That is, /abc/ works as is, but xabcx
needs to be spelled as \xabcx.
Add appropriate markup.
Bump Dd.
Checked with: IEEE Std 1003.1, 2004 Edition
MFC after: 3 days
copying "dir/file" and then copying "dir" results in
"File on disk is not older; skipping" for the "dir" because
it was implicitly created by "dir/file." Among other sins,
this means that "dir" ends up with the wrong permissions
and ownership.
This is actually a libarchive bug; fix is forthcoming.
The number of blocks read from ustar archives is just an implementation
difference. The failure of bsdcpio to emit a block count to stderr
in -p mode is a real bug in bsdcpio.
following the archive structure. In particular, it no longer
crashes if you run it against GNU cpio 2.9 (although it does
still complain a lot more than it should).
This is easy to confuse with the actual exit status of the program.
Instead exit with EX_SOFTWARE if the command doesn't exit normally.
MFC after: 1 month
I would like to provide a way to preview the effects of pathname edits,
but pattern selection has to happen against the unedited path, so it
seems that we have to show people the unedited path to help in
designing selection patterns.
if a user logged in more than a week ago.
This may contain multibyte characters (e.g. when using UTF-8).
This string is then aligned on byte-length rathern than char-length,
resulting in misalignment and unfinished multibyte characters.
PR: 126657
Submitted by: Johan van Selst <johans@stack.nl>
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
than linear relations. We can now convert degC to degF.
586 units, 56 prefixes
You have: 24 degC
You want: degF
75.2
You have: degC
You want: K
(-> x*1 +273.15)
(<- y*1 -273.15)
During the import of the 4.4BSD Lite sources, four files got added to
the repository called :tt, :tty, :var and :ww. They seem to contain some
kind of debug information. These files aren't used/installed anywhere.
Unfortunately the colons in the filenames prevents us from checking out
the source tree on file systems that don't support colons (such as FAT).
Just remove these unneeded files to keep SVN happy.
Reported by: Rohit Tripathi <rohit trip gmail com>
MFC after: 3 days
- Merge changes from NetBSD and OpenBSD.
- Add the Euro as a primitive unit, add old converted currency and
pegged currency (Obtained from Wikipedia)
- Rename "dollar" to "usdollar" as primitive unit, remove non-pegged
currency and add pegged currency (Obtained from Wikipedia)
- Updated the accuracy of a lot of constants (Obtained from Wikipedia)
PR: bin/106545 bin/88252
Submitted by: trasz<trasz@pin.if.uz.zgora.pl>, J Vinopal <banshee@abattoir.com>
Approved by: bde@ (mentor)
MFC after: 1 week
understand which code paths aren't possible.
This commit eliminates 117 false positive bug reports of the form
"allocate memory; error out if pointer is NULL; use pointer".
big endian platforms where time_t is 64bits (ie armeb and sparc64), it will
be a problem.
Use a temporary time_t to work around this.
Submitted by: Matthew Luckie <mjl AT luckie DOT org dot nz>
MFC after: 3 days
but \0ddd in a %b argument, with a length restriction of 3 octal digits
in either case. This seems silly, but it needs to be right so it's possible
to write an octal escape followed by an ordinary digit. Solaris printf(1)
and GNU printf(1) also behave this way.
Example: "printf '\0752'" now produces "=2" instead of garbage.
Specifically, build a 32-bit /usr/bin/ldd32 on amd64 which handles 32-bit
objects. Since it is a 32-bit binary, it can fork a child process which
can dlopen() a 32-bit shared library. The current 32-bit support in ldd
can't do this because it does the dlopen() from a 64-bit process. In order
to preserve an intuitive interface for users, the ldd binary automatically
execs /usr/bin/ldd32 for 32-bit objects. The end result is that ldd on
amd64 now transparently handles 32-bit shared libraries in addition to
32-bit binaries.
Submitted by: ps (indirectly)
This article [1] describes the -p flag for make(1):
Write to standard output the complete set of macro definitions and
target descriptions. The output format is unspecified.
We already support a similar flag (-d g1), but unlike -p, it still
executes commands. Our implementation just turns it into -d g1, but also
sets flag `printGraphOnly', which will cause make(1) to skip execution.
[1] http://www.opengroup.org/onlinepubs/009695399/utilities/make.html
Reviewed by: imp
PR: standards/99960
In particular, this fixes the oddity that -dumpl would apply
umask to copied dirs (which are created in the target tree)
but not to "copied" files (which are only linked). After
this change:
$ ls -ld a a/b a/b/c
d--x-w-r-- 3 tim tim 512 Jul 29 20:08 a
drwxr----x 3 tim tim 512 Jul 29 20:09 a/b
dr----x-w- 2 tim tim 512 Jul 29 20:09 a/b/c
$ (echo a; echo a/b; echo a/b/c) | cpio -dumpl o
$ cd o
$ ls -ld a a/b a/b/c
d--x-w-r-- 3 tim tim 512 Jul 29 20:08 a
drwxr----x 3 tim tim 512 Jul 29 20:09 a/b
dr----x-w- 2 tim tim 512 Jul 29 20:09 a/b/c
if we're reducing a rule that has an empty
right hand side and the yacc stackpointer is pointing at the very
end of the allocated stack, we end up accessing the stack out of
bounds by the implicit $$ = $1 action
Obtained from: OpenBSD
where it is used. [1]
Don't leak file descriptors in write_entry_backend if archive_write_header
returns ARCHIVE_FAILED.
Found by: Coverity Prevent [1]
