Commit Graph

78 Commits

Author SHA1 Message Date
Jake Burkholder
e39756439c Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
Jake Burkholder
740a1973a6 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
Poul-Henning Kamp
192c06ea1b Change the "bdev-whiner" to whine when open is attempted and extend
the deadline a month.
2000-05-09 18:53:57 +00:00
Kris Kennaway
8c6ac5e5a5 Reword warning to make it clearer (I read it as "remove block devices created
before 2000-06-01" which is obviously not what was intended :-)
2000-03-25 21:10:20 +00:00
Poul-Henning Kamp
e004067750 Whine at users who still have block devices in /dev, give them until
june 1st to fix their system.
2000-03-21 19:25:56 +00:00
Boris Popov
8dc74b6288 Backout previous commit. It was a mistake. 2000-01-23 15:47:46 +00:00
Boris Popov
9e991dfa2f Replace non obvious number with SPECNAMELEN constant.
Reviewed by:	phk
2000-01-23 14:58:53 +00:00
Poul-Henning Kamp
fb01c24c11 Be more careful about NOUDEV and NODEV.
Submitted by:	bde
2000-01-04 12:51:50 +00:00
Poul-Henning Kamp
c464420c89 Report swapdevices as cdevs rather than bdevs.
Remove unused dev2budev() function.
1999-11-29 21:37:18 +00:00
Poul-Henning Kamp
38941f351c Remove the now unused chrtoblk() function. 1999-11-29 20:50:58 +00:00
Peter Wemm
900942ba53 Zap devsw_module_handler(). 1999-11-08 08:10:00 +00:00
Poul-Henning Kamp
44d1184e81 Rename remove_dev() to destroy_dev().
Nagged about by:        msmith
1999-11-08 07:44:01 +00:00
Poul-Henning Kamp
d53dedee55 Remove the devsw magic from DEV_MODULE() 1999-11-07 10:01:17 +00:00
Poul-Henning Kamp
662761a74b A little step further in the dev_t cleanups:
Refuse to register a bmajor if the D_DISK flag is not set in cdevsw.

A little bit of cleanup while here.
1999-10-04 11:42:41 +00:00
Bruce Evans
c32cc1493f Const'ify devtoname() and d_name. This exposes some errors (2 non-benign).
Handle negative minor numbers properly in devtoname().
1999-09-13 12:29:32 +00:00
Poul-Henning Kamp
d137accc89 Add dev_t freeing code. Controlled by sysctl debug.free_devt, default
is off.
1999-08-29 09:09:12 +00:00
Poul-Henning Kamp
a87b535090 Put a brief comment on a couple of #defines. 1999-08-28 19:21:36 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Julian Elischer
1744fcd082 First small steps at merging DEVFS and PHK's Dev_t stuff. 1999-08-20 20:25:00 +00:00
Bill Fumerola
b8e49f681b Welcome devtoname(), to most likely be used when printing information
about a dev_t.

printf("%x", dev) now becomes printf("%s", devtoname(dev)) because
printing actual information about the device is much more useful then
printing a pointer to an address that would never help the developer debug.

Submitted by:	phk, bde
1999-08-17 20:25:50 +00:00
Poul-Henning Kamp
9a27d57978 Introduce lminor(dev_t dev), which returns a linear minor number,
ie: hides the fact that the major number is stuck in the middle.
1999-08-15 09:32:47 +00:00
Poul-Henning Kamp
7dc5cd047f The bdevsw() and cdevsw() are now identical, so kill the former. 1999-08-13 10:29:38 +00:00
Poul-Henning Kamp
0ef1c82630 Decommision miscfs/specfs/specdev.h. Most of it goes into <sys/conf.h>,
a few lines into <sys/vnode.h>.

Add a few fields to struct specinfo, paving the way for the fun part.
1999-08-08 18:43:05 +00:00
Greg Lehey
32c0c324d5 cdevsw_remove: place correct value in bmaj2cmaj. This had caused
warnings of the following nature on reloading a kld:

  WARNING: "vinum" is usurping "console"'s bmaj

This only applies to cases where "console" is mentioned.

Broken-by:	  grog
1999-08-08 00:34:00 +00:00
Brian Feldman
57d86fc695 Fix a REALLY embarrassing mistake. Don't look; I warned you. 1999-07-20 21:51:12 +00:00
Brian Feldman
fb30b5bdaf Make a dev2budev() function, and use it. This refixes pstat (working, broken,
working, broken, working) and savecore (working, working, broken, working,
working).

Sorta Reviewed by:	phk
1999-07-20 21:29:13 +00:00
Poul-Henning Kamp
698bfad7f2 Now a dev_t is a pointer to struct specinfo which is shared by all specdev
vnodes referencing this device.

Details:
        cdevsw->d_parms has been removed, the specinfo is available
        now (== dev_t) and the driver should modify it directly
        when applicable, and the only driver doing so, does so:
        vn.c.  I am not sure the logic in checking for "<" was right
        before, and it looks even less so now.

        An intial pool of 50 struct specinfo are depleted during
        early boot, after that malloc had better work.  It is
        likely that fewer than 50 would do.

        Hashing is done from udev_t to dev_t with a prime number
        remainder hash, experiments show no better hash available
        for decent cost (MD5 is only marginally better)  The prime
        number used should not be close to a power of two, we use
        83 for now.

        Add new checkalias2() to get around the loss of info from
        dev2udev() in bdevvp();

        The aliased vnodes are hung on a list straight of the dev_t,
        and speclisth[SPECSZ] is unused.  The sharing of struct
        specinfo means that the v_specnext moves into the vnode
        which grows by 4 bytes.

        Don't use a VBLK dev_t which doesn't make sense in MFS, now
        we hang a dummy cdevsw on B/Cmaj 253 so that things look sane.

	Storage overhead from all of this is O(50k).

        Bump __FreeBSD_version to 400009

The next step will add the stuff needed so device-drivers can start to
hang things from struct specinfo
1999-07-20 09:47:55 +00:00
Poul-Henning Kamp
3de280c443 [click] Now all dev_t's in the kernel have their char device major.
Only know casualy of this is swapinfo/pstat which should be fixes
the right way:  Store the actual pathname in the kernel like mount
does.  [Volounteers sought for this task]

The road map from here is roughly:  expand struct specinfo into struct
based dev_t.  Add dev_t registration facilities for device drivers and
start to use them.
1999-07-19 09:37:59 +00:00
Poul-Henning Kamp
d21c632c4b Use 256 as magic in bmaj2cmaj[]. Treat BLK/CHR dev_t more correctly. 1999-07-17 19:57:25 +00:00
Poul-Henning Kamp
f008cfcc1a I have not one single time remembered the name of this function correctly
so obviously I gave it the wrong name.  s/umakedev/makeudev/g
1999-07-17 18:43:50 +00:00
Poul-Henning Kamp
03016f421b Remove cmaj and bmaj args from DEV_DRIVER_MODULE. 1999-07-04 14:58:56 +00:00
Poul-Henning Kamp
c31558b215 Warn about drivers which take over other drivers cdevsw entries, but still
grant them squatters right.
1999-07-03 08:22:30 +00:00
Doug Rabson
6d4ce7aa8c * Call cdevsw_remove from the MOD_UNLOAD event.
* Fix a couple of warnings while I'm here.
1999-06-26 11:39:27 +00:00
Greg Lehey
9a9eb2b92b Add function cdevsw_remove, the opposite of cdevsw_add: remove an
entry in cdevsw (and bdevsw if appropriate).

Reviewed-by: phk
1999-06-25 07:49:01 +00:00
Dmitrij Tejblum
4ea5ad99d5 || vs && confusion in cdevsw_add(). 1999-06-01 20:41:26 +00:00
Poul-Henning Kamp
6fcd8a7c93 Introduce the makebdev() function, it does the same as the makedev()
function for now, but that will change.
1999-06-01 18:56:26 +00:00
Poul-Henning Kamp
2447bec829 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
Luoqi Chen
519566d2e3 Avoid negative numbers in dev_t manipulation. This should fix recent MFS
related crashes.
1999-05-18 13:14:43 +00:00
Poul-Henning Kamp
e519e78b42 braino. 1999-05-12 13:06:34 +00:00
Poul-Henning Kamp
adfea48f2b Produce compiler warning if dev_t and udev_t is confused. 1999-05-12 11:06:56 +00:00
Poul-Henning Kamp
bfbb9ce670 Divorce "dev_t" from the "major|minor" bitmap, which is now called
udev_t in the kernel but still called dev_t in userland.

Provide functions to manipulate both types:
        major()         umajor()
        minor()         uminor()
        makedev()       umakedev()
        dev2udev()      udev2dev()

For now they're functions, they will become in-line functions
after one of the next two steps in this process.

Return major/minor/makedev to macro-hood for userland.

Register a name in cdevsw[] for the "filedescriptor" driver.

In the kernel the udev_t appears in places where we have the
major/minor number combination, (ie: a potential device: we
may not have the driver nor the device), like in inodes, vattr,
cdevsw registration and so on, whereas the dev_t appears where
we carry around a reference to a actual device.

In the future the cdevsw and the aliased-from vnode will be hung
directly from the dev_t, along with up to two softc pointers for
the device driver and a few houskeeping bits.  This will essentially
replace the current "alias" check code (same buck, bigger bang).

A little stunt has been provided to try to catch places where the
wrong type is being used (dev_t vs udev_t), if you see something
not working, #undef DEVT_FASCIST in kern/kern_conf.c and see if
it makes a difference.  If it does, please try to track it down
(many hands make light work) or at least try to reproduce it
as simply as possible, and describe how to do that.

Without DEVT_FASCIST I belive this patch is a no-op.

Stylistic/posixoid comments about the userland view of the <sys/*.h>
files welcome now, from userland they now contain the end result.

Next planned step: make all dev_t's refer to the same devsw[] which
means convert BLK's to CHR's at the perimeter of the vnodes and
other places where they enter the game (bootdev, mknod, sysctl).
1999-05-11 19:55:07 +00:00
Poul-Henning Kamp
52400704e9 Unconfuse DEV_MODULE() and DEV_DRIVER_MODULE() about the difference between
a major number for a dev_t.
1999-05-09 13:00:50 +00:00
Poul-Henning Kamp
8f0024a54a Peter beat me to half this patch, but didn't do the other half:
set d_bmaj

	don't cast a dev_t to int before comparing to NODEV
1999-05-09 08:18:12 +00:00
Peter Wemm
0da14f00bf Comment advising ordering of cdevsw_add and bdevsw_add is obsolete (no
bdevsw_add any more).
1999-05-09 08:10:17 +00:00
Poul-Henning Kamp
4be2eb8c49 I got tired of seeing all the cdevsw[major(foo)] all over the place.
Made a new (inline) function devsw(dev_t dev) and substituted it.

Changed to the BDEV variant to this format as well: bdevsw(dev_t dev)

DEVFS will eventually benefit from this change too.
1999-05-08 06:40:31 +00:00
Poul-Henning Kamp
46eede0058 Continue where Julian left off in July 1998:
Virtualize bdevsw[] from cdevsw.  bdevsw() is now an (inline)
        function.

        Join CDEV_MODULE and BDEV_MODULE to DEV_MODULE (please pay attention
        to the order of the cmaj/bmaj arguments!)

        Join CDEV_DRIVER_MODULE and BDEV_DRIVER_MODULE to DEV_DRIVER_MODULE
        (ditto!)

(Next step will be to convert all bdev dev_t's to cdev dev_t's
before they get to do any damage^H^H^H^H^H^Hwork in the kernel.)
1999-05-07 10:11:40 +00:00
Doug Rabson
6ca34d85be Call the module's unload handler before removing the device from the
cdevsw list.  This allows a handler to veto the load without losing its
place in the list.

PR:	kern/10653
1999-03-23 21:11:47 +00:00
Matthew Dillon
d254af07a1 Fix warnings in preparation for adding -Wall -Wcast-qual to the
kernel compile
1999-01-27 21:50:00 +00:00
Garrett Wollman
14177d72cd My changes to the new device interface:
- Interface wth the new resource manager.
	- Allow for multiple drivers implementing a single devclass.
	- Remove ordering dependencies between header files.
	- Style cleanup.
	- Add DEVICE_SUSPEND and DEVICE_RESUME methods.
	- Move to a single-phase interrupt setup scheme.

Kernel builds on the Alpha are brken until Doug gets a chance to incorporate
these changes on that side.

Agreed to in principle by: dfr
1998-11-14 21:58:51 +00:00