Commit Graph

16 Commits

Author SHA1 Message Date
Jason Evans
aa33517e94 Implement pthread_attr_[gs]etguardsize(). Non-default-size stacks used to
be malloc()ed, but they are now allocated using mmap(), just as the
default-size stacks are.  A separate cache of stacks is kept for
non-default-size stacks.

Collaboration with:	deischen
2001-07-20 04:23:11 +00:00
Daniel Eischen
ac530e7b3a Added a missing set of braces to a conditional that encompasses more than
one statement.
2001-04-10 04:22:24 +00:00
Daniel Eischen
e5106342c6 Add weak definitions for wrapped system calls. In general:
_foo - wrapped system call
	foo - weak definition to _foo

and for cancellation points:

	_foo - wrapped system call
	__foo - enter cancellation point, call _foo(), leave
	        cancellation point
	foo - weak definition to __foo

Change use of global _thread_run to call a function to get the
currently running thread.

Make all pthread_foo functions weak definitions to _pthread_foo,
where _pthread_foo is the implementation.  This allows an application
to provide its own pthread functions.

Provide slightly different versions of pthread_mutex_lock and
pthread_mutex_init so that we can tell the difference between
a libc mutex and an application mutex.  Threads holding mutexes
internal to libc should never be allowed to exit, call signal
handlers, or cancel.

Approved by:	-arch
2001-01-24 13:03:38 +00:00
Daniel Eischen
fbeb36e4bf Implement zero system call thread switching. Performance of
thread switches should be on par with that under scheduler
activations.

  o Timing is achieved through the use of a fixed interval
    timer (ITIMER_PROF) to count scheduling ticks instead
    of retrieving the time-of-day upon every thread switch
    and calculating elapsed real time.

  o Polling for I/O readiness is performed once for each
    scheduling tick instead of every thread switch.

  o The non-signal saving/restoring versions of setjmp/longjmp
    are used to save and restore thread contexts.  This may
    allow the removal of _THREAD_SAFE macros from setjmp()
    and longjmp() - needs more investigation.

Change signal handling so that signals are handled in the
context of the thread that is receiving the signal.  When
signals are dispatched to a thread, a special signal handling
frame is created on top of the target threads stack.  The
frame contains the threads saved state information and a new
context in which the thread can run.  The applications signal
handler is invoked through a wrapper routine that knows how
to restore the threads saved state and unwind to previous
frames.

Fix interruption of threads due to signals.  Some states
were being improperly interrupted while other states were
not being interrupted.  This should fix several PRs.

Signal handlers, which are invoked as a result of a process
signal (not by pthread_kill()), are now called with the
code (or siginfo_t if SA_SIGINFO was set in sa_flags) and
sigcontext_t as received from the process signal handler.

Modify the search for a thread to which a signal is delivered.
The search algorithm is now:

  o First thread found in sigwait() with signal in wait mask.
  o First thread found sigsuspend()'d on the signal.
  o Current thread if signal is unmasked.
  o First thread found with signal unmasked.

Collapse machine dependent support into macros defined in
pthread_private.h.  These should probably eventually be moved
into separate MD files.

Change the range of settable priorities to be compliant with
POSIX (0-31).  The threads library uses higher priorities
internally for real-time threads (not yet implemented) and
threads executing signal handlers.  Real-time threads and
threads running signal handlers add 64 and 32, respectively,
to a threads base priority.

Some other small changes and cleanups.

PR:		17757 18559 21943
Reviewed by:	jasone
2000-10-13 22:12:32 +00:00
Jason Evans
40316fa981 Fix a memory leak. pthread_set_name_np() allocates space for a name, but
_thread_gc() was not deallocating it.

PR:	misc/18504
2000-05-16 21:57:12 +00:00
Daniel Eischen
1752e66d49 -Wall and minor style(9) cleanups. 1999-12-28 18:13:04 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
Daniel Eischen
fa7c4d5575 Add RCS IDs to those files without them.
Fix copyrights (s/REGENTS/AUTHOR).

Suggested by:	tg
Approved by:	jb
1999-08-05 12:15:30 +00:00
Jason Evans
66da783384 Fix a couple more coding style nits. 1999-07-11 06:06:52 +00:00
Jason Evans
34582929f1 Modify previous changes to conform better to libc_r's coding style.
Always use mmap() for default-size stack allocation.  Use MAP_ANON instead
of MAP_STACK on the alpha architecture.

Reduce the amount of code executed while owning _gc_mutex during stack
allocation.
1999-07-11 05:56:37 +00:00
Jason Evans
876cc3dae0 Always use growable thread stacks on the i386. The VM_STACK kernel option
must be made default for the alpha before growable thread stacks are
enabled for the alpha.
1999-07-06 00:25:38 +00:00
Jason Evans
ecaa6e8c9e Use growable stacks for thread stacks that are the default stack size.
Cache discarded default thread stacks for use in subsequent thread creations.

Create a red zone at the end of each stack (including the initial thread
stack), with the hope of causing a segfault if a stack overflows.

To activate these modifications, add -D_PTHREAD_GSTACK to CFLAGS in
src/lib/libc_r/Makefile.  Since the modifications depend on the VM_STACK
kernel option, I'm not sure how to safely use growable stacks by default.

Testing, as well as algorithmic and stylistic comments are welcome.
1999-07-05 00:35:19 +00:00
John Birrell
02292f131a In the words of the author:
o The polling mechanism for I/O readiness was changed from
    select() to poll().  In additon, a wrapped version of poll()
    is now provided.

  o The wrapped select routine now converts each fd_set to a
    poll array so that the thread scheduler doesn't have to
    perform a bitwise search for selected fds each time file
    descriptors are polled for I/O readiness.

  o The thread scheduler was modified to use a new queue (_workq)
    for threads that need work.  Threads waiting for I/O readiness
    and spinblocks are added to the work queue in addition to the
    waiting queue.  This reduces the time spent forming/searching
    the array of file descriptors being polled.

  o The waiting queue (_waitingq) is now maintained in order of
    thread wakeup time.  This allows the thread scheduler to
    find the nearest wakeup time by looking at the first thread
    in the queue instead of searching the entire queue.

  o Removed file descriptor locking for select/poll routines.  An
    application should not rely on the threads library for providing
    this locking; if necessary, the application should use mutexes
    to protect selecting/polling of file descriptors.

  o Retrieve and use the kernel clock rate/resolution at startup
    instead of hardcoding the clock resolution to 10 msec (tested
    with kernel running at 1000 HZ).

  o All queues have been changed to use queue.h macros.  These
    include the queues of all threads, dead threads, and threads
    waiting for file descriptor locks.

  o Added reinitialization of the GC mutex and condition variable
    after a fork.  Also prevented reallocation of the ready queue
    after a fork.

  o Prevented the wrapped close routine from closing the thread
    kernel pipes.

  o Initialized file descriptor table for stdio entries at thread
    init.

  o Provided additional flags to indicate to what queues threads
    belong.

  o Moved TAILQ initialization for statically allocated mutex and
    condition variables to after the spinlock.

  o Added dispatching of signals to pthread_kill.  Removing the
    dispatching of signals from thread activation broke sigsuspend
    when pthread_kill was used to send a signal to a thread.

  o Temporarily set the state of a thread to PS_SUSPENDED when it
    is first created and placed in the list of threads so that it
    will not be accidentally scheduled before becoming a member
    of one of the scheduling queues.

  o Change the signal handler to queue signals to the thread kernel
    pipe if the scheduling queues are protected.  When scheduling
    queues are unprotected, signals are then dequeued and handled.

  o Ensured that all installed signal handlers block the scheduling
    signal and that the scheduling signal handler blocks all
    other signals.  This ensures that the signal handler is only
    interruptible for and by non-scheduling signals.  An atomic
    lock is used to decide which instance of the signal handler
    will handle pending signals.

  o Removed _lock_thread_list and _unlock_thread_list as they are
    no longer used to protect the thread list.

  o Added missing RCS IDs to modified files.

  o Added checks for appropriate queue membership and activity when
    adding, removing, and searching the scheduling queues.  These
    checks add very little overhead and are enabled when compiled
    with _PTHREADS_INVARIANTS defined.  Suggested and implemented
    by Tor Egge with some modification by me.

  o Close a race condition in uthread_close.  (Tor Egge)

  o Protect the scheduling queues while modifying them in
    pthread_cond_signal and _thread_fd_unlock.  (Tor Egge)

  o Ensure that when a thread gets a mutex, the mutex is on that
    threads list of owned mutexes.  (Tor Egge)

  o Set the kernel-in-scheduler flag in _thread_kern_sched_state
    and _thread_kern_sched_state_unlock to prevent a scheduling
    signal from calling the scheduler again.  (Tor Egge)

  o Don't use TAILQ_FOREACH macro while searching the waiting
    queue for threads in a sigwait state, because a change of
    state destroys the TAILQ link.  It is actually safe to do
    so, though, because once a sigwaiting thread is found, the
    loop ends and the function returns.  (Tor Egge)

  o When dispatching signals to threads, make the thread inherit
    the signal deferral flag of the currently running thread.
    (Tor Egge)

Submitted by: Daniel Eischen <eischen@vigrid.com> and
              Tor Egge <Tor.Egge@fast.no>
1999-06-20 08:28:48 +00:00
John Birrell
58a7cc5d1b [ The author's description... ]
o Runnable threads are now maintained in priority queues.  The
    implementation requires two things:

      1.) The priority queues must be protected during insertion
          and removal of threads.  Since the kernel scheduler
          must modify the priority queues, a spinlock for
          protection cannot be used.   The functions
          _thread_kern_sched_defer() and _thread_kern_sched_undefer()
          were added to {un}defer kernel scheduler activation.

      2.) A thread (active) priority change can be performed only
          when the thread is removed from the priority queue.  The
          implementation uses a threads active priority when
          inserting it into the queue.

    A by-product is that thread switches are much faster.  A
    separate queue is used for waiting and/or blocked threads,
    and it is searched at most 2 times in the kernel scheduler
    when there are active threads.  It should be possible to
    reduce this to once by combining polling of threads waiting
    on I/O with the loop that looks for timed out threads and
    the minimum timeout value.

  o Functions to defer kernel scheduler activation were added.  These
    are _thread_kern_sched_defer() and _thread_kern_sched_undefer()
    and may be called recursively.  These routines do not block the
    scheduling signal, but latch its occurrence.  The signal handler
    will not call the kernel scheduler when the running thread has
    deferred scheduling, but it will be called when running thread
    undefers scheduling.

  o Added support for _POSIX_THREAD_PRIORITY_SCHEDULING.  All the
    POSIX routines required by this should now be implemented.
    One note, SCHED_OTHER, SCHED_FIFO, and SCHED_RR are required
    to be defined by including pthread.h.  These defines are currently
    in sched.h.  I modified pthread.h to include sched.h but don't
    know if this is the proper thing to do.

  o Added support for priority protection and inheritence mutexes.
    This allows definition of _POSIX_THREAD_PRIO_PROTECT and
    _POSIX_THREAD_PRIO_INHERIT.

  o Added additional error checks required by POSIX for mutexes and
    condition variables.

  o Provided a wrapper for sigpending which is marked as a hidden
    syscall.

  o Added a non-portable function as a debugging aid to allow an
    application to monitor thread context switches.  An application
    can install a routine that gets called everytime a thread
    (explicitly created by the application) gets context switched.
    The routine gets passed the pthread IDs of the threads that are
    being switched in and out.

Submitted by: Dan Eischen <eischen@vigrid.com>

Changes by me:

  o Added a PS_SPINBLOCK state to deal with the priority inversion
    problem most often (I think) seen by threads calling malloc/free/realloc.

  o Dispatch signals to the running thread directly rather than at a
    context switch to avoid the situation where the switch never occurs.
1999-03-23 05:07:56 +00:00
Dmitrij Tejblum
60abf62bfa Debug when an environment variable set, no when it is unset. 1998-09-30 19:17:51 +00:00
John Birrell
dc3a8b52c0 Move the cleanup code that frees memory allocated for a dead thread from
the thread kernel into a garbage collector thread which is started when
the fisrt thread is created (other than the initial thread). This
removes the window of opportunity where a context switch will cause a
thread that has locked the malloc spinlock, to enter the thread kernel,
find there is a dead thread and try to free memory, therefore trying
to lock the malloc spinlock against itself.

The garbage collector thread acts just like any other thread, so
instead of having a spinlock to control accesses to the dead thread
list, it uses a mutex and a condition variable so that it can happily
wait to be signalled when a thread exists.
1998-09-30 06:36:56 +00:00