disconnection function.
Disconnecting hooks are called outside of NET_EPOCH, but
ng_pppoe_disconnect() calls NG_SEND_DATA_ONLY() which should be called
in NET_EPOCH.
PR: 257067
Reported by: niels=freebsd@bakker.net
Reviewed by: vmaffione (mentor), glebius, donner
Approved by: vmaffione (mentor), glebius, donner
Sponsored by: vstack.com
Differential Revision: https://reviews.freebsd.org/D34185
Now that each module handles its global and VNET initialization
itself, there is no VNET related stuff left to do in domain_init().
Differential revision: https://reviews.freebsd.org/D33541
The historical BSD network stack loop that rolls over domains and
over protocols has no advantages over more modern SYSINIT(9).
While doing the sweep, split global and per-VNET initializers.
Getting rid of pr_init allows to achieve several things:
o Get rid of ifdef's that protect against double foo_init() when
both INET and INET6 are compiled in.
o Isolate initializers statically to the module they init.
o Makes code easier to understand and maintain.
Reviewed by: melifaro
Differential revision: https://reviews.freebsd.org/D33537
isochronous transfers.
If users want to disable isochronous transfers, which cause high
frequency periodic interrupts from the USB host controller, then
net.bluetooth.usb_isoc_enable can be set to zero, either as a
sysctl(8) or as a loader.conf(5) tunable.
Differential Revision: https://reviews.freebsd.org/D33282
Submitted by: naito.yuichiro@gmail.com
PR: 238235
MFC after: 1 week
Sponsored by: NVIDIA Networking
Like other Intel controllers, these require firmware to be loaded, and
generic ng_ubt attach causes them to lock up until a power cycle.
However, their firmware interface for querying version info and loading
operational firmware is different from that implemented by ng_ubt_intel
and iwmbtfw, so they are not usable yet. Just disable attach for now to
avoid stalls during USB device enumeration.
PR: 260161
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The previous commit to this node falsely stated that locked callouts
are compatible with netgraph ng_callout KPI. They are not. An item
can be queued instead of being applied to the node, which results in
a mutex leak to the callout thread and later unlocked call into function
that expects to be called locked.
Potentially netgraph can be taught to handle locked callouts, but that
would bring a lot of complexity in it. Instead lets question necessity
of ng_callout() instead of callout_reset(). It protects against node
going away while callout is scheduled. But a node that drains all
callouts in the shutdown method (ng_l2tp does) is already protected.
Fixes: 89042ff776
This definition enables callers to estimate remaining space on the
kstack, and take action on it. Notably, it enables optimizations in the
GEOM and netgraph subsystems to directly dispatch work items when there
is sufficient stack space, rather than queuing them for a worker thread.
Implement it for riscv, arm, and mips. Remove the #ifdefs, so it will
not go unimplemented elsewhere.
PR: 259157
Reviewed by: mav, kib, markj (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32580
This adds a new ng_device command, NGM_DEVICE_ETHERALIGN, which has no
associated args. After the command arrives, the device begins adjusting all
packets sent out its hook to have ETHER_ALIGN bytes of padding at the
beginning of the packet. The ETHER_ALIGN padding is added only when
running on an architecture that requires strict alignment of IP headers
(based on the __NO_STRICT_ALIGNMENT macro, which is only #define'd on
x86 as of this writing).
This also adds ascii <-> binary command translation to ng_device, both for
the existing NGM_DEVICE_GET_DEVNAME and the new ETHERALIGN command.
This also gives a name to every ng_device node when it is constructed, using
the cdev device name (ngd0, ngd1, etc). This makes it easier to address
command msgs to the device using ngctl(8).
Reviewed by: donner, ray, adrian
Differential Revision: https://reviews.freebsd.org/D32905
MFC after: 1 week
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
The ng_h4 module was disconnected 13 years ago when the tty later was
locked by Ed. It completely fails to compile, and has a number of false
positives for Giant use. Remove it for lack of interest. Bluetooth has
largely (completely?) moved on from bluetooth over UART transport.
OK'd by: emax
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31846
Create netgraph nodes for bridge interfaces when the ng_ether module
is loaded. If a bridge interface is created after loading the ng_ether
module, a netgraph node is created via ether_ifattach().
MFC after: 1 week
Apparently e62e4b8594 wasn't enough to close the race between
a queue being flushed by a packet and callout executing, because
the callouts used without a lock aren't 100% bulletproof. To close
the race use callout_init_mtx() for L2TP timers, and make sure that
all calls to ng_callout()/ng_uncallout() are done under the seq lock.
If used properly, a locked callout can be used transparently with
old netgraph KPI of ng_callout/ng_uncallout which predates locked
callouts.
While here, utilize ng_uncallout_drain() instead of ng_uncallout()
on the node shutdown.
PR: 241133
Reviewed by: mjg, markj
Differential Revision: https://reviews.freebsd.org/D31476
Cover few cases of access to seq without lock missed in 702f98951d.
There are no known bugs fixed with this change, however. With INVARIANTS
embed ng_l2tp_seq_check() into lock/unlock macros. Slightly reduce number
of locks/unlocks per packet keeping the lock between functions.
Reviewed by: mjg, markj
Differential Revision: https://reviews.freebsd.org/D31476
Move shared code into ng_uncallout_internal(). While here add a comment
mentioning a problem with scheduled+executing callout.
Reviewed by: mjg, markj
Differential Revision: https://reviews.freebsd.org/D31476
ng_uncallout. Most of them do not check it anyway, so very little node
changes are required.
Reviewed by: mjg, markj
Differential Revision: https://reviews.freebsd.org/D31476
Currently, most protocols implement pru_listen with something like the
following:
SOCK_LOCK(so);
error = solisten_proto_check(so);
if (error) {
SOCK_UNLOCK(so);
return (error);
}
solisten_proto(so);
SOCK_UNLOCK(so);
solisten_proto_check() fails if the socket is connected or connecting.
However, the socket lock is not used during I/O, so this pattern is
racy.
The change modifies solisten_proto_check() to additionally acquire
socket buffer locks, and the calling thread holds them until
solisten_proto() or solisten_proto_abort() is called. Now that the
socket buffer locks are preserved across a listen(2), this change allows
socket I/O paths to properly interlock with listen(2).
This fixes a large number of syzbot reports, only one is listed below
and the rest will be dup'ed to it.
Reported by: syzbot+9fece8a63c0e27273821@syzkaller.appspotmail.com
Reviewed by: tuexen, gallatin
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31659
Implement kernel support for RFC 5549/8950.
* Relax control plane restrictions and allow specifying IPv6 gateways
for IPv4 routes. This behavior is controlled by the
net.route.rib_route_ipv6_nexthop sysctl (on by default).
* Always pass final destination in ro->ro_dst in ip_forward().
* Use ro->ro_dst to exract packet family inside if_output() routines.
Consistently use RO_GET_FAMILY() macro to handle ro=NULL case.
* Pass extracted family to nd6_resolve() to get the LLE with proper encap.
It leverages recent lltable changes committed in c541bd368f.
Presence of the functionality can be checked using ipv4_rfc5549_support feature(3).
Example usage:
route add -net 192.0.0.0/24 -inet6 fe80::5054:ff:fe14:e319%vtnet0
Differential Revision: https://reviews.freebsd.org/D30398
MFC after: 2 weeks
newhook can be invoked by ngthread, which runs in a network epoch
section and is thus not permitted to perform M_WAITOK allocations.
Reported by: Jenkins
Reviewed by: donner, afedorov
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31486
SO_RERROR indicates that receive buffer overflows should be handled as
errors. Historically receive buffer overflows have been ignored and
programs could not tell if they missed messages or messages had been
truncated because of overflows. Since programs historically do not
expect to get receive overflow errors, this behavior is not the
default.
This is really really important for programs that use route(4) to keep
in sync with the system. If we loose a message then we need to reload
the full system state, otherwise the behaviour from that point is
undefined and can lead to chasing bogus bug reports.
Reviewed by: philip (network), kbowling (transport), gbe (manpages)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26652
Some code was using it already, but in many places we were testing
SO_ACCEPTCONN directly. As a small step towards fixing some bugs
involving synchronization with listen(2), make the kernel consistently
use SOLISTENING(). No functional change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
During tests an assert was triggered and pointed to missing flags in
the newlink function of ng_bridge(4).
Reported by: markj
Reviewed by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D30759
Detailed analysis in https://github.com/genneko/freebsd-vimage-jails/issues/2
brought the problem down to a double call of ng_node_name() before and
after a vnet move. Because the name of the node is already known
(occupied by itself), the second call fails.
PR: 241954
Reported by: Paul Armstrong
MFC: 1 week
Differential Revision: https://reviews.freebsd.org/D30110
Each packet is counted as 128 bytes by the code, not 125. Not sure
what I was thinking about here 14 years ago. May be just a typo.
Reported by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after: 2 weeks
Once the final component of the IP address has been parsed, the offset
on the input must not be advanced, as this would remove an unparsed
character from the input.
Submitted by: Markus Stoff
Reviewed by: donner
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D26489
m_pullup(9) frees the mbuf(9) chain in the case of an allocation error.
The mbuf chain must not be freed again in this case.
PR: 255874
Submitted by: <lylgood@foxmail.com>
Approved by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30273
If sending out a packet fails during the loop over all links, the
allocated memory is leaked and not all links receive a copy. This
patch fixes those problems, clarifies a premature abort of the loop,
and fixes a minory style(9) bug.
PR: 255430
Submitted by: Dancho Penev
Tested by: Dancho Penev
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30008
Hint the compiler, that this update is needed at most once per second.
Only in this case the memory line needs to be written. This will
reduce the amount of cache trashing during forward of most frames.
Suggested by: zec
Approved by: zec
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28601
The node ng_bridge underwent a lot of changes in the last few months.
All those steps were necessary to distinguish between structure
modifying and read-only data transport paths. Now it's done, the node
can perform frame forwarding on multiple cores in parallel.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28123
Use the new control message to move ethernet addresses from a link to
a new link in ng_bridge(4). Send this message instead of doing the
work directly requires to move the loop detection into the control
message processing. This will delay the loop detection by a few
frames.
This decouples the read-only activity from the modification under a
more strict writer lock.
Reviewed by: manpages (gbe)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28559
Add a new control message to move ethernet addresses to a given link
in ng_bridge(4). Send this message instead of doing the work directly.
This decouples the read-only activity from the modification under a
more strict writer lock.
Decoupling the work is a prerequisite for multithreaded operation.
Approved by: manpages (bcr), kp (earlier version)
MFC: 3 weeks
Differential Revision: https://reviews.freebsd.org/D28516
Several protocol methods take a sockaddr as input. In some cases the
sockaddr lengths were not being validated, or were validated after some
out-of-bounds accesses could occur. Add requisite checking to various
protocol entry points, and convert some existing checks to assertions
where appropriate.
Reported by: syzkaller+KASAN
Reviewed by: tuexen, melifaro
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29519
As this controller requires firmware patch downloading to operate.
"Intel Wireless 7265" support in iwmbtfw(8) is yet to be done.
Tested by: arrowd et al
PR: 228787
MFC after: 2 weeks
Unconditional execution of "clear feature" request at SETUP stage was
workaround for probe failures on ng_ubt.ko re-kldloading which is
unnecessary now.
Reviewed by: hselasky
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D29775
For broadcast, multicast and unknown unicast, the replication loop
sends a copy of the packet to each link, beside the first one. This
special path is handled later, but the counters are not updated.
Factor out the common send and count actions as a function.
Reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28537
In the data path of ng_bridge(4), the only value of the host struct,
which needs to be modified, is the staleness, which is reset every
time a frame is received. It's save to leave the code as it is.
This patch is part of a series to make ng_bridge(4) multithreaded.
Reviewed by: kp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28546
In a earlier version of ng_bridge(4) the exernal visible host entry
structure was a strict subset of the internal one. So internal view
was a direct annotation of the external structure. This strict
inheritance was lost many versions ago. There is no need to
encapsulate a part of the internal represntation as a separate
structure.
This patch is a preparation to make the internal structure read only
in the data path in order to make ng_bridge(4) multithreaded.
Reviewed by: kp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28545
