Report, on a periodic basis, the I/O latencies the CAM I/O scheduler
computes. These times are only for the hardware portion of the I/O as
measured from the time the operation is scheduled with the SIM using
xpt_action() until the SIM reports it has completed with xpt_dine(). Any
time the I/O operation spends in a software queue is no included.
The P50 (median), P90, P99 and P99.9 statistics about the latency of
each of the read, write and trim operations that completed during the
polling interval are reported. If there are fewer than 2, 10, 100 or
1000 operations during the polling interval, no statistic is reported
and a single dash '-' is displayed.
The read, write and trim commands (either on the command line or at run
time) toggle display of these operations. The color command toggles
color (it defaults to on, like gstat). When color is enabled, unknown
statistics are reported in blue, high latency for a statistics is
reported in red, medium in magenta and low in green (as with gstat). The
med= and hi= commands can set these latency thresholds.
Limitations: The entire sysctl space for all the devices is walked for
each polling period. This should be optimized to remember the OIDs and
only do such polling with the xpt generation changes. There is also no
way to filter devices displayed. This command only works on physical
devies that are connected to SCSI, ATA or NVME sims as those are the
only ones that are instrumented in the CAM I/O scheduler (the
CAM_IOSCHED_DYNAMIC option must be in the kernel, and the dynamic
scheduler can't be disabled).
MFC After: 1 month
Relnotes: yes
Sponsored by: Netflix
Reviewed by: pauamma_gundo.com, chs
Differential Revision: https://reviews.freebsd.org/D34259
Providing a timestamp with seconds granularity helps make it obvious
that the display is updating.
Reviewed by: mckusick
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29181
Using 8 width is too wide for large numbers like 1379991K;
1330M is easier to read.
Submitted by: ota_j.email.ne.jp
Reviewed by: mckusick
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D33495
Similar to netstat, clean up code that uses inet_lnaof() to check for
binding to "host 0" (lowest host on network) as a "network" bind.
Such things don't happen, and current networks are seldom if ever
found in /etc/networks.
MFC after: 1 month
Reviewers: tuexen
Differential Revision: https://reviews.freebsd.org/D32720
-swap disk stat based on new size.
Display corrupts after resizing a window.
Process SIGWINCH to redraw all window.
Submitted by: Yoshihiro Ota ota@j.email.ne.jp
Differential Revision: https://reviews.freebsd.org/D29337
Stop free() even if kvm_getprocs as we can come back but set nprocs = 0.
Check nprocs in showpigs() to ensure not try displaying with kvm_getprocs failed.
Current code can have pt with non-null after kvm_getprocs() failure.
Replace to realloc for simpler operations.
Submitted by: Yoshihiro Ota ota@j.email.ne.jp
Reviewed by: mckusick@
Differential Revision: https://reviews.freebsd.org/D29303
Preserve more space for swap devise names.
Prevent line overflow with long devise name.
Don't draw a bar when swap is not used at all.
Simplify and optimize code.
Change the label to end at end of 100%.
PR: 251655
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27496
Using UI units allows to fit larger numbers in columns.
Stop calling v_page_size - this is a value that doesn't change at runtime.
Renamed WINDOW *wnd to *wd to avoid conflict with global *wnd variable.
Use bit-shift to convert page size to byte.
PR: 246458
Submitted by: ota@j.email.ne.jp
MFC after: 2 weeks
Differential Revision: D24834
kd is already properly declared in extern.h and defined in main.c, rendering
this definition useless. This fixes the -fno-common build.
MFC after: 3 days
Add a stat counter to track ipv6 atomic fragments. Atomic fragments can be
generated in response to invalid path MTU values, but are also a potential
attack vector and considered harmful (see RFC6946 and RFC8021).
While here add tracking of the atomic fragment counter to netstat and systat.
Reviewed by: tuexen, jtl, bz
Approved by: jtl (mentor), bz (mentor)
Event: Aberdeen hackathon 2019
Differential Revision: https://reviews.freebsd.org/D17511
According to systat(1) :only option is supposed to accept multiple drives
but the parser for its arguments stops after first entry. Fix the parser
logic to accept multiple drives.
PR: 59220
Reported by: Andy Farkas <andyf@speednet.com.au>
MFC after: 1 week
Several statistic counters are uint64_t values and are printed by systat
using %lu. This results in displaying wrong numbers. Use PRIu64 instead.
While there, print variables of size_t using %zd.
MFC after:i 3 days
Differential Revision: https://reviews.freebsd.org/D17838
While <sys/sysctl.h> includes <sys/queue.h> unconditionally, it is only
actually used in code which is conditional on _KERNEL. Make the #include
itself conditional as well, and fix userland code that uses <sys/queue.h>
for other purposes but relied on <sys/sysctl.h> to bring it in.
MFC after: 1 week
This option was used in the early days to allow performance measurements
extrapolating the use of SCTP checksum offloading. Since this feature
is now available, get rid of this option.
This also un-breaks the LINT kernel. Thanks to markj@ for making me
aware of the problem.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Following struct vmtotal changes, make systat use and correctly
display 64-bit counters. Switch to humanize_number(3) to overcome
homegrown arithmetics limits in pretty printing large numbers. Use
1024 as a divisor for memory fields to make it consistent with other
tools and users expectations.
Submitted by: Pawel Biernacki <pawel.biernacki@gmail.com>
Sponsored by: Mysterious Code Ltd.
PR: 2137
Differential revision: https://reviews.freebsd.org/D13105
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Violators may define _WANT_SOCKET and _WANT_UNPCB respectively and
are not guaranteed for stability of the structures. The violators
list is the the usual one: libprocstat(3) and netstat(1) internally
and lsof in ports.
In struct xunpcb remove the inclusion of kernel structure and add
a bunch of spare fields. The xsocket already has socket not included,
but add there spares as well. Embed xsockbuf into xsocket.
Sort declarations in sys/socketvar.h to separate kernel only from
userland available ones.
PR: 221820 (exp-run)
This is a painful change, but it is needed. On the one hand, we avoid
modifying them, and this slows down some ideas, on the other hand we still
eventually modify them and tools like netstat(1) never work on next version of
FreeBSD. We maintain a ton of spares in them, and we already got some ifdef
hell at the end of tcpcb.
Details:
- Hide struct inpcb, struct tcpcb under _KERNEL || _WANT_FOO.
- Make struct xinpcb, struct xtcpcb pure API structures, not including
kernel structures inpcb and tcpcb inside. Export into these structures
the fields from inpcb and tcpcb that are known to be used, and put there
a ton of spare space.
- Make kernel and userland utilities compilable after these changes.
- Bump __FreeBSD_version.
Reviewed by: rrs, gnn
Differential Revision: D10018
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96