The introduced -j option is highly dependant on the ordering of arguments,
and it exhibited broken behavior in some other circumstances. Fix these
issues, and simplify the feature by removing the unneessary double parsing
of options.
Reviewed by: jilles
Differential Revision: https://reviews.freebsd.org/D13952
Currently most of the debug registers are not saved and restored
during VM transitions allowing guest and host debug register values to
leak into the opposite context. One result is that hardware
watchpoints do not work reliably within a guest under VT-x.
Due to differences in SVM and VT-x, slightly different approaches are
used.
For VT-x:
- Enable debug register save/restore for VM entry/exit in the VMCS for
DR7 and MSR_DEBUGCTL.
- Explicitly save DR0-3,6 of the guest.
- Explicitly save DR0-3,6-7, MSR_DEBUGCTL, and the trap flag from
%rflags for the host. Note that because DR6 is "software" managed
and not stored in the VMCS a kernel debugger which single steps
through VM entry could corrupt the guest DR6 (since a single step
trap taken after loading the guest DR6 could alter the DR6
register). To avoid this, explicitly disable single-stepping via
the trace flag before loading the guest DR6. A determined debugger
could still defeat this by setting a breakpoint after the guest DR6
was loaded and then single-stepping.
For SVM:
- Enable debug register caching in the VMCB for DR6/DR7.
- Explicitly save DR0-3 of the guest.
- Explicitly save DR0-3,6-7, and MSR_DEBUGCTL for the host. Since SVM
saves the guest DR6 in the VMCB, the race with single-stepping
described for VT-x does not exist.
For both platforms, expose all of the guest DRx values via --get-drX
and --set-drX flags to bhyvectl.
Discussed with: avg, grehan
Tested by: avg (SVM), myself (VT-x)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D13229
Address style issues including some previously raised in D13923.
- Use designated initializers for structs
- Always use bracketed return style
- No initialization in declarations
- Align function prototype names
- Remove old commented code/unused includes
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13943
It fixes a crash with a socket in top mode.
Ex:
# pmcstat -R 127.0.0.1:8080 -T -w1
then
# pmcstat -n1 -Sclock.prof -Slock.failed -O 127.0.0.1:8080
MFC after: 1 week
Sponsored by: Stormshield
I need these tools in order to install the crossbuilt FreeBSD and create a
disk image. Linux does not have a st_flags in struct stat so unfortunately
I need a bunch of ugly ifdefs. The resulting binaries allow me to
sucessfully install a MIPS64 world and create a disk-image that boots.
Reviewed By: brooks, bdrewery, emaste
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D13307
r328032 introduced a second round of argument parsing to proxy the request
through to a jail as needed, but failed to reset OPTIND before getting to
the second round of parsing to allow other flags to be set.
Reported by: Oleg Ginzburg <olevole olevole ru>
Attempting to retrieve an md_cval string from a kernel module with
kldxref would throw a offset error for modules created using lld, since
this value would be placed at the end of all allocated sections.
Add an ef_read_seg_string method to the ef interface, to allow reading
strings of varying size without attempting to read beyond the segment's
bounds.
PR: 224875
Submitted by: Mitchell Horne <mhorne063@gmail.com>
Reviewed by: cem, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13923
Move the 'X' and 'Y' entries into their sorted location in the list
of flags just above 'Z'.
Reviewed by: bcr
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13904
Provide a -j option that can take a jail name or id. If -j is specified,
check that the jail exists and proxy the service request through to
service(8) in the jail.
This allows for cleaner workflows when updating services in a jail, turning
the following:
pkg -j dns upgrade
jexec dns service named restart
into:
pkg -j dns upgrade
service -j dns named restart
PR: 223325
Submitted by: David O'Rourke (with slight changes)
MFC after: 2 weeks
6.0.0 (branches/release_60 r321788). Upstream has branched for the
6.0.0 release, which should be in about 6 weeks. Please report bugs and
regressions, so we can get them into the release.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
MFC after: 3 months
SUJ + cg checksums produce spurious warnings after an unclean shutdown
(e.g. a crash). For now disable SUJ for UFS installs so installing from
a FreeBSD 12 snapshot results in a usable filesystem, until this can be
fixed.
PR: 225110
Submitted by: Arshan Khanifar <arshankhanifar gmail.com>
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13890
more in r317426. There's nothing in the tree that references digiio.h
(apart from digictl(8)), so no driver implements it. Since digictl(8)
was only used to control digi(4) devices, it too should go.
the ACPI_ROOT_OBJECT and ACPI_TO_POINTER macros from acpica's actypes.h
header, that they use arithmetic on a null pointer treated as a cast
from integer to pointer, which is a GNU extension. We turn off the
warning, because this is in contributed code.
Requested by: rakuco
Add cpuctl(4) ioctl CPUCTL_EVAL_CPU_FEATURES which forces re-read of
cpu_features, cpu_features2, cpu_stdext_features, and
std_stdext_features2.
The intent is to allow the kernel to see the changes in the CPU
features after micocode update. Of course, the update is not atomic
across variables and not synchronized with readers. See the man page
warning as well.
Reviewed by: imp (previous version), jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13770
CIS. Coverity has tagged it as tainted. While this data is more
trusted than your average data, we still need to do some basic
validation on it. Check ioctl return value to ensure we switch memory
targets between common and attribute as well as the lseek.
CID: 1210464, 1006640, 1006868, 1007292, 1009091, 1009822, 1009824
condition. This should prevent a double free. In addition, prevent a
leak by freeing dp each loop and when we're done.
CID: 1383577
Sponsored by: Netflix
If a signal was delivered while the main thread was not in poll(2) and after
check was performed, we could reenter poll and never detect termination. Fix
this with the pipefd trick. (This race was introduced very recently, in
r327482.)
PR: 224503
Reported by: kib
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
There has been some fallout from the change. The change itself was not valueable
enough to spend time investigating the corner cases, let's just back it out.
Reported by: flo
foundation for invoking efibootmgr as part of new-style EFI booting on
x86. On PS3 and PowerNV, which are booted using Linux kexec from petitboot
rather than by loader(8), install the kernel and the rest of /boot to a
FAT partition and set up the appropriate petitboot configuration file
there.
The new bootconfig installer stage can do platform-dependent modifications
more complex than partition layout and installation of boot blocks and can
be used to (as here) set up some special configuration files, run efibootmgr,
or boot0cfg.
MFC after: 1 month
one of the directories in the filesystem hierarchy is a FAT mountpoint,
settings its times will fail, which would cause installation to abort.
Instead, make this a best-effort thing.
Handling this error is a hack and a better internal scheme for handling
this should be added to libarchive.
Add missed unistd.h include. Not sure where it was lost; I believe it
compiled before I submitted the change.
PR: 224503
Reported by: Cy Schubert <Cy.Schubert AT komquats.com>
Sponsored by: Dell EMC Isilon
syslog(3), routines used in write_warmstart(), and exit(3) are all
signal-unsafe. Instead, set a signal-safe flag and check the flag in the
rpcbind main loop to shutdown safely.
PR: 224503
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13728
Some users, especially those that are new, might be confused when passwd
does not echo anything. Inform users that the password will not be
visible.
PR: 196113
Submitted by: Byron Grobe <grobe0ba@gmail.com>
Implement the 'p' flag for newsyslog from NetBSD. This flag results in
the first log file for a given file to not be compressed.
While here, don't change file attributes during a no-op run
PR: 162798
Submitted by: heas@shrubbery.net
MFC After: 1 month
the installer but not mounted (i.e. with boot1.efifat dd'ed to them
rather than the forthcoming proper filesystem) would get newfs_msdos run
on them immediately after the boot code was copied. This would overwrite
the bootstrap code, causing the EFI system partition to be blanked and
resulting in an unbootable system.
PR: 224562
than arguing) Coverity found:
o Use open + fstat rather than stat + open to avoid any races for a
file that's static for the life of the system. This will prevent any
problems should someone insert a new device while installing a
kernel in the future.
o Use strlcpy instead of strcpy as a failsafe to knowing that the
strings can't possibly be larger than the buffer due to data
source limits (though in the future these limits might be more
dynamic).
o If we can't find the hints file, return rather than dereference
a NULL pointer.
o Check for lastmod before calling strcmp in case a PNP entry
comes before a module entry. That's not allowed, but within the
realm of crazy things programmers do.
o Free lastmod before exiting search_hints() to avoid a leak.
CID: 1383971, 1383970, 1383969, 1383965, 1383963, 1383960
If O_CREAT is given, open() needs a mode argument. Follow the umask by
passing 0666.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13607
devmatch(8) matchs up devices in the system device tree with drivers
that may match them. For each unattached device in the system, it
tries to find matching PNP info in the linker hints and prints modules
to load to claim the devices.
In --unbound mode, devmatch can look for drivers that have attached to
devices in the device tree and have plug and play information, but for
which no PNP info exists. This helps find drivers that haven't been
converted yet that are in use on this system.
In addition, the ability to dump out linker.hints is provided.
Future commits will add hooks to devd.conf and rc.d to fully automate
using this information.
This squashes the warning gebnerated by GCC 6.x. Since
variables that are now removed had come documentation
value, put relevant bits in comment, so they can be
resurrected from there when actually needed.
After consultation with SPDX experts and their matching guidelines[1],
the licensing doesn't exactly match the BSD-2-Clause. It yet remains to be
determined if they are equivalent or if there is a recognized license that
matches but it is safer to just revert the tags.
Let this also be a reminder that on FreeBSD, SPDX tags are only advisory
and have no legal value (but IANAL).
Pointyhat to: pfg
Thanks to: Rodney Grimes, Gary O'Neall
[1] https://spdx.org/spdx-license-list/matching-guidelines
When building the command to execute for compression, newsyslog was modifying
the generic arguments array instead of its own copy.
Meaning on the second file to compress with the same arguments, the command line
was not the one expected.
Fix it by creating one copy of the arguments per execution and modifying that
copy.
While here, print the command line executed in verbose mode.
Reported by: many
We may need to initialize multiple inode blocks before writing a given
inode. makefs(8) was only initializing a single block at a time, so
certain inode allocation patterns could lead to a situation where it
wrote an inode to an uninitialized block. That inode might be clobbered
by a later initialization, resulting in a filesystem image containing
directory entries that point to a seemingly unused inode.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D13505
Fix it and rename misnamed time_t variables `expire_days, password_days'
(always holding absolute time) to `expire_time, password_time'.
Add a comment for a case of overloading `cmdcnf->password_days'
and `cmdcnf->expire_days' with absolute time.
Reported by: markj
Approved by: mav (mentor)
MFC after: 1 week
to preconfigured values for -e, -p and -w flags.
Use non-negative symbols instead of magic values
in passwd_val/pw_password functions.
PR: 223431
Submitted by: Yuri Pankov (in part, patch for the manual)
Reported by: mav (mentor)
MFC after: 3 days
Relnotes: yes
Improve options handling and error out if multiple mutually exclusive
options are passed to acpiconf. Switch from using atoi() to strtol() for
argument parsing, and add error checking and handling, instead of blindly
trusting that the integer conversion is OK.
Cange err() to errx() in once case, the errno value was garbage there.
Reviewed by: emaste
Approved by: emaste
Differential Revision: D13430
efibootmgr manages the UEFI BootXXXX variables that implement the UEFI
Boot Manager protocol defined in the UEFI standards. It is modeled
after the Linux program of the same name with a mostly compatible set
of command line options. Since there's a fair amount of OS specifioc
code due to differeing names and methods of doing things, the
compatibility isn't 100%.
Basic functionality is implemented, though the more advanced next boot
functionality that's been defined elsewhere is unimplemented.
Submitted by: Matt Williams (with unix / efi path xlate by me)
Sponsored by: Netflix
layer, for example, to specify that the EFI boot partition should be
mounted at /efi and formatted normally with newfs_msdos rather than
splatted to from /boot/boot1.efifat.
This commit adds only the API for this; actual platform use will come later.
have a semantic different than the traditional gzip(1)
This is done to allow to use zstd(1) as a compression tool without
having to patch it to change its default behavior.
field, and support properly parse out the hostname as described by RFC3164,
which wasn't done before. However, don't discard message if it doesn't
have hostname, for compatibility.
Enable logging of the message supplied hostname instead of real hostname
with -H switch.
PR: 200933
Reported by: Konstantin Pavlov <thresh nginx.com>
MFC after: 2 months
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Commit these apart because compile testing doesn't guarantee I didn't made
some nasty mistake. No functional change intended.
It turns out kgmon(8) still works, and provides some functionality that's
not provided by pmcstat(8).
Reported by: bde@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
When you install a computer for the first time, the date in the CMOS sometimes
not accurate and you need to ntpdate as ntpd will fail a the time difference
is too big.
Add an option in bsdinstall to enable ntpdate that will do that for us.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D13149
r309934 cleaned up some cases in bsdinstall to use heredocs but broke
the indentation of the generated output, because <<- heredocs strip
leading tabs.
PR: 221982
Reviewed by: allanjude, dteske
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13190
`vidcontrol -h 0` is acceptable, so be explicit that it's less than zero
that is not allowed.
Reported by: Siva Mahadevan
Sponsored by: The FreeBSD Foundation
parsing a textual UEFI Device Path, since otherwise it things the
passed in path is a filename. While here, reduce the repetition of
8192.
Sponsored by: Netflix
When called with an absolute pathname, periodic should attempt to execute
every script in that directory. If the directory does not exist, it should
print an error and exit 1. Due to a copy/paste mistake in r231568, it exits
0 in that case.
Reported by: devel/hs-ShellCheck
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13070
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
Usually 'local' is used along with other rules such as 'no-implicit-rule' or
'dependency' which avoids this problem. It's possible to need to use 'local'
while relying on the default rules though for a file which is not in the source
tree nor generated in the kernel.
Sponsored by: Dell
Differential Revision: https://reviews.freebsd.org/D13125
When using -l option targeting file that can't be opened (ie. nmdm module
is not loaded and /dev/nmdm* is specified) bhyve tries to apply capsicum
capabilities to a file that was not opened.
Enclose that code in an if statement and only run it on correctly opened
descriptor also providing meaningful message in case of an error.
Submitted by: Pawel Biernacki <pawel.biernacki@gmail.com>
Reviewed by: grehan, emaste
Sponsoied by: Mysterious Code Ltd.
Differential Revision: D12985
We started out having Linux compatible libefivar interfaces. This was
in anticipation of porting the GPL'd efibootmgr to FreeBSD via a
port. However, since we need that functionality in the base, that port
isn't going to happened. It also appears that efivar is a private
library that's not used much outside a command line util and
efibootmgr. Reduce compatibility with the Linux version a little by
removing the mode parameter to efi_set_variable (which was unused on
FreeBSD, and not set to something useful in the code we'd
written). Also remove some efi error routines that were never
implemented and existed only to placate early GPL efibootmgr porting
experiments.
Suggested by: Matt Williams
Sponsored by: Netflix
Failure modes of the modern (that is, produced in the last 25 years)
hard drives and SSDs made the utility outdated. Since the kernel
interface to support it was removed in r324853, cut the userspace
remnants as well.
Discussed with: bde (who does not like the removal)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
library -- libpmcstat.
This includes PMC logging module, symbols lookup functions,
ELF parsing, process management, PMC attachment, etc.
This allows to reuse code while building new hwpmc(4)-based applications.
Also add pmcstat_symbol_search_by_name() function that allows to find
mapped IP range for a given function name.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12718
The code went to a lot of trouble to issue either a start+stop condition
or a repeated start condition only to follow it with a stop condition
and a read(2) call that issues a new start condition.
So, fix the read in I2C_MODE_REPEATED_START mode by using I2CREAD ioctl
within the running transaction. This obviously requires that the slave
address has the read bit set which was not required before.
Another problem was with width parameter of zero and
I2C_MODE_REPEATED_START mode. In that case we issued a repeated start
without any preceding start.
While here, remove the redundant (unused) argument to I2CSTOP throughout
the program.
Also, clarify the meaning of -w option, especially "-w 0", in the manual
page.
Reviewed by: no one
Differential Revision: https://reviews.freebsd.org/D12331
Using HAVE_* is a internal tcpdump style standard.
We want to be consistent with the standard to upstream those changes in
the future.
Requested by: glebius@
Use SLIST from sys/queue.h instead of homebrew linked list for mountlist.
Reviewed by: bapt, rmacklem
MFC after: 1 week
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D12504
Use SLIST from sys/queue.h instead of homebrew linked list for the exportlist.
Reviewed by: bapt, rmacklem
MFC after: 1 week
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D12502
* pw is not initialized before use
* success is returned if crypt(3) errors
These bugs were introduced in r231994, which attempted to adopt DragonflyBSD
f4a9869feb646aafe72de6e5d61051a023a02676. The original author of the
Dragonfly change also noticed these mistakes and filed the PR.
PR: 222620
Submitted by: Lubos Boucek <bouceklubos AT gmail.com>
Obtained from: DragonflyBSD f4a9869feb646aafe72de6e5d61051a023a02676
Enabling the PID randomization option in bsdinstall(8)'s hardening menu
now randomizes the effective value of kern.randompid on each boot.
Previous behaviour:
When kern.randompid was enabled via the the bsdinstall(8) hardening menu,
a random value was generated and placed in the systems /etc/sysctl.conf as
kern.randompid=value
This makes the value of kern.randompid static across reboots.
New behaviour:
When kern.randompid is enabled via the bsdinstall(8) hardening menu, the
line kern.randompid=1 is placed in the systems /etc/sysctl.conf.
This takes advantage of a new kernel feature and makes the value of
kern.randompid be randomized by the kernel on each reboot.
Submitted by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Reviewed by: des
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12433
* Ensure that the datalen always describes the length after the IPv6
header consistently, not matter which protocol us used for probes..
* Document that the default length is 20, not 12.
* Don't send inormation in probe packets which is not needed or
even checked when the responses are processed.
* Address CID 978587.
This is mainly a cleanup preparing the addition of SCTP and TCP
as possible probe packet protocols.
MFC after: 4 weeks
Mention new -n flag.
Remove optional -h from the operation list lines, -h would cause the
utility to exit without performing the action.
Explain the default path behavior, list default path.
Correct example of update performed from the non-default path,
it needs -n and the trailing slash is redundand.
Remove useless BUGS section.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
'-n' option.
Look for updates in the default locations only after user-supplied
locations are tried.
If newer microcode files are put into non-standard path, both measures
allow to avoid situation where older update loaded from the default
path first, and then the second update is applied from non-standard
path. Applying intermediate updates might be undesirable.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It was supposed to provide a recovery mechanism against bugs in procfs's
long deprecated tracing capabilities.
Remove the tool as a prerequisite to axing the kernel side.
The tracing facility to use is ptrace(2).
MFC after: 2 weeks
Introduced in r324007, the data alloced by strdup was never free'ed.
While here, remove cast to caddr_t when freeing dp.
Reported by: bde
MFC after: 1 week
X MFC With: r324007
This helps future maintainability of tcpdump so we don't forget to update
the manpage (like we have previously).
Stolen from: usr.bin/file/Makefile
Reviewed by: jilles
Approved by: delphij (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12403
in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.
Reviewed by: imp, allanjude
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12317
warning about a filesystem which doesn't have a mountpoint. Presumably, the
person who wrote the install script knew what they were doing.
Submitted by: Brian Mueller <bmueller@panasas.com>
MFC after: 1 month
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D12346
If the iovctl command was invoked with only the -C flag, the user would
receive a message claiming that they needed to also supply either the
-d flag or the -f flag. However, in the case of the -C mode, only the
-f flag is acceptable. Correct this error message in this case.
PR: 222050
Submitted by: Heinz N. Gies
Reported by: Heinz N. Gies
MFC after: 1 week
The existing scan code is based on sending an i2c START condition and if
there is no error it assumes there is a device at that i2c address. Some
i2c controllers don't support sending individual start/stop signals on the
bus, they can only perform complete data transfers with start/stop handled
in the silicon.
This adds a fallback mechanism that attempts to read a single byte from each
i2c address. It's less reliable than looking for an an ACK repsonse to a
start, because some devices will NAK an attempt to read that isn't preceeded
by a write of a register address. Writing to devices to probe them is too
dangerous to even consider. The user is told that a less-reliable scan is
being done, so even if the read-scan comes up empty too, it's still a vast
improvement over the old situation where it would just claim there were no
devices on the bus even though the devices were there and working fine.
If the i2c controller responds with a proper ENODEV (device doesn't support
operation) or an almost-proper EOPNOTSUPP, the START/STOP scan is switched
to a read-scan right away. Most controllers respond with ENXIO or EIO if
they don't support START/STOP, so no quick-out is available. For those,
if a scan of all 127 addresses and come up empty, the scan is re-done using
the read method.
Reported by: Maxim Filimonov <che@bein.link>
This was originally added as "exit $SUCCESS" but with nothing to set the
SUCCESS variable. Thus it became an exit with no argument, which just
exits with the status of the preceding command.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
code. I think it is safe to say it's not going to be. I'm also working to
de-orbit catman, so remove the reference in the manpage.
Reviewed by: allanjude
Split out asciidump, utf8dump, bindump, and hexdump into a separate
file efiutil.c. Implement new efi_print_load_option for printing out
the EFI_LOADER_OPTION data structure used to specify different options
to the UEFI boot manager.
Sponsored by: Netflix
Many UEFI variables are UCS2 strings (some NUL terminated, others
not). Add --utf8 (-u) to convert UCS2 strings to UTF8 before printing.
Sponsored by: Netflix
mtree path names and link attributes are encoded, generally using strvis. Newer
versions of mtree will use C-style escapes but previously the accepted form was
octal escapes. makefs' mtree code spots the C-style escapes but fails to deal
with octal escapes correctly.
Remove mtree's escape-decoding code (except for a few instances where it's
needed) and instead pass pathnames and link targets through strunvis prior to
use.
Reviewed by: marcel
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12104
Advertise this by changing the defaults to mostly red. If you don't like
this, change them (almost) back using:
vidcontrol -c charcolors,base=7,height=0
vidcontrol -c mousecolors,base=0[,height=15]
The (graphics mode only) mouse cursor colors were hard-coded to a black
border and lightwhite interior. Black for the border is the worst
possible default, since it is the same as the default black background
and not good for any dark background. Reversing this gives the better
default of X Windows. Coloring everything works better still. Now
the coloring defaults to a lightwhite border and red interior.
Coloring for the character cursor is more complicated and mode
dependent. The new coloring doesn't apply for hardware cursors. For
non-block cursors, it only applies in graphics mode. In text mode,
the cursor color was usually a hard-coded (dull)white for the background
only, unless the foreground was white when it was a hard-coded black
for the background only, unless the foreground was white and the
background was black it was reverse video. In graphics mode, it was
always reverse video for the block cursor. Reverse video is worse,
especially over cutmarking regions, since cutmarking still uses simple
reverse video (nothing better is possible in text mode) and double
reverse video for the cursor gives normal video. Now, graphics mode
uses the same algorithm as the best case for text mode in all cases
for graphics mode. The hard-coded sequence { white, black, } for the
background is now { red, white, blue, } where the first 2 colors can
be configured. The blue color at the end is a sentinel which prevents
reverse video being used in most cases but breaks the compatibility
setting for white on black and black on white characters. This will
be fixed later. The compatibility setting is most needed for mono modes.
The previous commit to syscons.c changed sc_cnterm() to be more careful.
It followed null pointers in some cases. But sc_cnterm() has been
unreachable for 15+ years since changes for multiple consoles turned
off calls to the the cnterm destructor for all console drivers. Before
them, it was only called at boot time. So no driver with an attached
console has ever been unloadable and not even the non-console destructors
have been tested much.
and r322101), adding atf_expect_fail() before chflags(8) is invoked
if the filesystem is ZFS, which does not support UF_IMMUTABLE.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
and repurposing "blink". Improve accuracy of documentation of historical
mistakes and other bugs.
"blink" now means "set the blink attribute for the target(s)" instead of
"set the blink attribute and clear other attributes [and control flags]".
It was even more confusing to use "blinking" for the single attribute to
keep the old meaning for "blink".
"destructive" is not as historically broken or gone as the previous version
said.
The bugs involving resetting from defaults are now understood and partly
documented (the defaults are mis-initialized).
Previouly it was possible to create users with spaces in the name with:
pw useradd -u 1234 -g 1234 -n 'test user'
The "-g 1234" is relevant, without it the name was already rejected
as expected:
[fk@test ~]$ sudo pw useradd -u 1234 -n 'test user'
pw: invalid character ` ' at position 4 in userid/group name
Bug unintentionally found with a salt config without explicit name entry:
test user:
user.present:
- uid: 1234
- gid: 1234
- fullname: Test user
- shell: /usr/local/bin/bash
- home: /home/test
- groups:
- wheel
- salt
"Luckily" salt modules rarely bother with input validation either ...
PR: 221416
Submitted by: Fabian Keil
Obtained from: ElectroBSD
MFC after: 1 week
"pw usermod someuser -G ''" is supposed make sure that someuser
doesn't have any secondary group memberships.
Previouly it was a nop because split_groups() only intitialised
"groups" if at least one group was specified. As a result the
existing secondary group memberships were kept.
PR: 221417
Submitted by: Fabian Keil
Obtained from: ElectroBSD
MFC after: 1 week
Relnotes: yes
- Remove ad hoc inet_ntoa prototype declaration; it's already handled
by the included headers.
- De-K&Rify the function prototypes for eachres_whoami(..),
eachres_getfile(..), and main(..).
MFC after: 1 week
PR: 71667
Tested with: clang (5.0), gcc (4.2.1, 5)
breaks in the vt case to the same places that the man(1) puts then in
the SYNOPSIS. This was already done for the syscons case. Man pages
can't depend on the driver, and the SYNOPSIS is hard-coded for syscons
except for -f where it is hard-coded for vt. The usage message reverses
this for sc. The only other differences are whitespace and removing
-[dL] and -l for vt.
capabilities.
Most of the capabilities (all of the arcane ones) were in FreeBSD-2.0.5,
but were harder to use then, and vidcontrol didn't try. FreeBSD-4.1.0
added per-vty support, fixed the destructivness of the "destructive"
cursor, and improved APIs. Start using the new APIs, support all of
their capabilities, and document all of the capabilities and some of
the historical mistakes.
vt doesn't support any of this before or after the change.
Fix minor unrelated bitrot in the usage message for the syscons case.
sequence "ESC [ %d A" for this although that was used here. I will fix
teken later, but use the more portable ioctl KDSBORDER here.
The ioctl is also much easier to use if you check that it works. For
-b, check it and complain and exit if it failed, so that it is more
obvious that that vt doesn't support border colors. Don't check it
when restoring the border color in revert(), since revert() is used
on vt for handling other errors.
Fix nearby error handling and style. For the error of an invalid
color, revert() and print a specific error message using err() instead
of not revert()ing and printing spam using usage().
Non-tests/... changes:
- Add HAS_TESTS= to Makefiles with libraries and programs to enable iteration
and propagate the appropriate environment down to *.test.mk.
tests/... changes:
- Add appropriate support Makefile.inc's to set HAS_TESTS in a minimal manner,
since tests/... is a special subdirectory tree compared to the others.
MFC after: 2 months
MFC with: r322511
Reviewed by: arch (silence), testing (silence)
Differential Revision: D12014
Note: Mouse's bthidd.conf record should contain vendor and device IDs
to make proper device detection. If it does not contain IDs,
regenerate record with "Query" command of recent bthidcontrol(8).
Submitted by: Dirk Engling <erdgeist@erdgeist.org>
Reviewed by: emax
Approved by: bapt (mentor), gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D3702
Extend bthidd.conf format to store vendor and product IDs of remote
Bluetooth HID devices to make possible implementation of device
specific quirks inside bthidd(8).
Add support for querying of this information from device's SDP records
with bthidcontrol(8) "Query" command.
Submitted by: Dirk Engling <erdgeist@erdgeist.org>
Reviewed by: emax
Approved by: bapt (mentor), gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D3702
Previously we added an ifconfig_$INTERFACE line to rc.conf for each
unsuccessful DCHP attempt.
PR: 219515
Reviewed by: allanjude
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D11967
As peter@ points out in pr/220953:
"rwho, rwhod and ruptime are not part of the remote login suite (rsh, rlogin
etc).
They should *not* be in the rcmds package which is disabled by default. We
rely on rwho/rwhod/ruptime in the freebsd.org cluster."
This commit is a re-commit of r322029 and r322031 with a better commit log, as
pointed out by ngie@.
This also includes the necesary changes to OptionalObsoleteFiles.inc, as
requested by jhb@.
PR: 220953
Reported by: peter@, jhb@
Differential Revision: https://reviews.freebsd.org/D11743
the previous behavior actually is required for setting up configurations
in which the RTC is using UTC but the timezone is not. Still, besides
uniform error handling, that file should get the same treatment in the
non-interactive variants supported by tzsetup(8).
of the initial UTC dialog to install_zoneinfo() so that file gets the
necessary treatment also when that dialog is skipped via "-s", when
selecting UTC from the time zone menu or on the command-line instead
etc.
- Make the initial UTC dialog actually work by giving the relevant files
the necessary treatment and then exit when choosing "Yes" there instead
of moving on to the time zone menu regardless.
- Since r301131, /etc/localtime is also installed when selecting UTC in
interactive configurations (which previously meant only via the time
zone menu, though). Thus, the code added in r230298 which treats a
NULL zone file name as UTC and removes /etc/localtime in that case can
go again.
- Consistently refer to "could not delete" (as chosen by the oldest such
code in here) when unlink(2) fails instead of a to mixture of "delete"
and "unlink" in error messages.
debug (cudbg) code, hooked up to the main driver via an ioctl.
The ioctl can be used to collect the chip's internal state in a
compressed dump file. These dumps can be decoded with the "view"
component of cudbg.
Obtained from: Chelsio Communications
MFC after: 2 months
Sponsored by: Chelsio Communications
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
On the systems on which I tested this exporter, I never ran into metrics
that were named in such a way that they couldn't be exported to
Prometheus metrics directly. Now it turns out that on systems with NUMA,
the sysctl tree contains metrics named dev.${driver}.${index}.%domain.
For these metrics, the % in the name is problematic, as Prometheus
doesn't allow this symbol to be used.
Remove the assertions that were originally put in place to prevent the
exporter from generating malformed output and add code to deal with it
accordingly. For metric names, convert any unsupported character to an
underscore. For label values, perform string escaping.
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=221035
Reported by: lifanov@
Gcc noticed that the result of the bit shift is always zero. Shift so
that the ATC_CS_C67 bits end up in bits 6 & 7.
Reviewed by: grehan, tychon
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11775
Gcc complained that e82545_tx_thread has a return type declared but
doesn't return anything. Annotate the procedure with _Noreturn.
Reviewed by: grehan
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11774
kldfind() only matches kernel modules, so if you link imgact_binmisc directly
into the kernel, binmiscctl can't find it, tries to load it, and errors
out with:
Can't load imgact_binmisc kernel module: File exists
A quick search of other base commands shows that the correct procedure is to
call modfind(), and then try kldload() if that fails.
PR: 218593
Submitted by: Dan Nelson <dnelson_1901@yahoo.com>
MFC after: 1 week
Since kib's change the stack guard is now ON by default,
this option in hardening menu of bsdinstall is no longer needed.
Submitted by: Bartlomiej Rutkowski <robak@FreeBSD.org>
Reviewed by: bapt
Approved by: bapt
MFC after: 1 day
Sponsored by: Pixeware LTD
Differential Revision: https://reviews.freebsd.org/D11686