"hw.vmm.trace_guest_exceptions". To enable this feature set the tunable
to "1" before loading vmm.ko.
Tracing the guest exceptions can be useful when debugging guest triple faults.
Note that there is a performance impact when exception tracing is enabled
since every exception will now trigger a VM-exit.
Also, handle machine check exceptions that happen during guest execution
by vectoring to the host's machine check handler via "int $18".
Discussed with: grehan
MFC after: 2 weeks
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
In vt_efifb_init the framebuffer's physaddr is passed to PHYS_TO_DMAP
before the DMAP is setup. The result is not actually accessed until
after the mapping is setup, though. Loosen the assertion in PHYS_TO_DMAP
for now, to allow use when dmaplimit == 0.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1142
- Move the existing code to x86/x86/identcpu.c since it is x86-specific.
- If the CPUID2_HV flag is set, assume a hypervisor is present and query
the 0x40000000 leaf to determine the hypervisor vendor ID. Export the
vendor ID and the highest supported hypervisor CPUID leaf via
hv_vendor[] and hv_high variables, respectively. The hv_vendor[]
array is also exported via the hw.hv_vendor sysctl.
- Merge the VMWare detection code from tsc.c into the new probe in
identcpu.c. Add a VM_GUEST_VMWARE to identify vmware and use that in
the TSC code to identify VMWare.
Differential Revision: https://reviews.freebsd.org/D1010
Reviewed by: delphij, jkim, neel
This reduces variability during timer calibration by keeping the emulation
"close" to the guest. Additionally having all timer emulations in the kernel
will ease the transition to a per-VM clock source (as opposed to using the
host's uptime keep track of time).
Discussed with: grehan
Place the code introduced in r268660 into a separate function that can be
called from uiomove_fromphys. Instead of pre-allocating two KVA pages use
vmem_alloc to allocate them on demand when needed. This prevents blocking if
a page fault is taken while physical addresses from outside the DMAP are
used, since the lock is now removed.
Also introduce a safety catch in PHYS_TO_DMAP and DMAP_TO_PHYS.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D947
amd64/amd64/pmap.c:
- Factor out the code to deal with non DMAP addresses from pmap_copy_pages
and place it in pmap_map_io_transient.
- Change the code to use vmem_alloc instead of a set of pre-allocated
pages.
- Use pmap_qenter and don't pin the thread if there can be page faults.
amd64/amd64/uio_machdep.c:
- Use pmap_map_io_transient in order to correctly deal with physical
addresses not covered by the DMAP.
amd64/include/pmap.h:
- Add the prototypes for the new functions.
amd64/include/vmparam.h:
- Add safety catches to make sure PHYS_TO_DMAP and DMAP_TO_PHYS are only
used with addresses covered by the DMAP.
This device is only attached to priviledged domains, and allows the
toolstack to interact with Xen. The two functions of the privcmd
interface is to allow the execution of hypercalls from user-space, and
the mapping of foreign domain memory.
Sponsored by: Citrix Systems R&D
i386/include/xen/hypercall.h:
amd64/include/xen/hypercall.h:
- Introduce a function to make generic hypercalls into Xen.
xen/interface/xen.h:
xen/interface/memory.h:
- Import the new hypercall XENMEM_add_to_physmap_range used by
auto-translated guests to map memory from foreign domains.
dev/xen/privcmd/privcmd.c:
- This device has the following functions:
- Allow user-space applications to make hypercalls into Xen.
- Allow user-space applications to map memory from foreign domains,
this is accomplished using the newly introduced hypercall
(XENMEM_add_to_physmap_range).
xen/privcmd.h:
- Public ioctl interface for the privcmd device.
x86/xen/hvm.c:
- Remove declaration of hypercall_page, now it's declared in
hypercall.h.
conf/files:
- Add the privcmd device to the build process.
forced invalidation of the cache range regardless of the presence of
self-snoop feature. Some recent Intel GPUs in some modes are not
coherent, and dirty lines in CPU cache must be flushed before the
pages are transferred to GPU domain.
Reviewed by: alc (previous version)
Tested by: pho (amd64)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The hypervisor hides the MONITOR/MWAIT capability by unconditionally setting
CPUID.01H:ECX[3] to 0 so the guest should not expect these instructions to
be present anyways.
Discussed with: grehan
code. There are only a handful of MSRs common between the two so there isn't
too much duplicate functionality.
The VT-x code has the following types of MSRs:
- MSRs that are unconditionally saved/restored on every guest/host context
switch (e.g., MSR_GSBASE).
- MSRs that are restored to guest values on entry to vmx_run() and saved
before returning. This is an optimization for MSRs that are not used in
host kernel context (e.g., MSR_KGSBASE).
- MSRs that are emulated and every access by the guest causes a trap into
the hypervisor (e.g., MSR_IA32_MISC_ENABLE).
Reviewed by: grehan
VM-exit and ultimately on whether nRIP is valid. This allows us to update
the %rip after the emulation is finished so any exceptions triggered during
the emulation will point to the right instruction.
Don't attempt to handle INS/OUTS VM-exits unless the DecodeAssist capability
is available. The effective segment field in EXITINFO1 is not valid without
this capability.
Add VM_EXITCODE_SVM to flag SVM VM-exits that cannot be handled. Provide the
VMCB fields exitinfo1 and exitinfo2 as collateral to help with debugging.
Provide a SVM VM-exit handler to dump the exitcode, exitinfo1 and exitinfo2
fields in bhyve(8).
Reviewed by: Anish Gupta (akgupt3@gmail.com)
Reviewed by: grehan
instruction bytes in the VMCB on a nested page fault. This is useful because
it saves having to walk the guest page tables to fetch the instruction.
vie_init() now takes two additional parameters 'inst_bytes' and 'inst_len'
that map directly to 'vie->inst[]' and 'vie->num_valid'.
The instruction emulation handler skips calling 'vmm_fetch_instruction()'
if 'vie->num_valid' is non-zero.
The use of this capability can be turned off by setting the sysctl/tunable
'hw.vmm.svm.disable_npf_assist' to '1'.
Reviewed by: Anish Gupta (akgupt3@gmail.com)
Discussed with: grehan
by explicitly moving it out of the interrupt shadow. The hypervisor is done
"executing" the HLT and by definition this moves the vcpu out of the
1-instruction interrupt shadow.
Prior to this change the interrupt would be held pending because the VMCS
guest-interruptibility-state would indicate that "blocking by STI" was in
effect. This resulted in an unnecessary round trip into the guest before
the pending interrupt could be injected.
Reviewed by: grehan
resume that is a superset of a pcb. Move the FPU state out of the pcb and
into this new structure. As part of this, move the FPU resume code on
amd64 into a C function. This allows resumectx() to still operate only on
a pcb and more closely mirrors the i386 code.
Reviewed by: kib (earlier version)
<machine/md_var.h>.
- Move some CPU-related variables out of i386/i386/identcpu.c to
initcpu.c to match amd64.
- Move the declaration of has_f00f_hack out of identcpu.c to machdep.c.
- Remove a misleading comment from i386/i386/initcpu.c (locore zeros
the BSS before it calls identify_cpu()) and remove explicit zero
assignments to reduce the diff with amd64.
optional attributes field.
- Add a 'machdep.smap' sysctl that exports the SMAP table of the running
system as an array of the ACPI 3.0 structure. (On older systems, the
attributes are given a value of zero.) Note that the sysctl only
exports the SMAP table if it is available via the metadata passed from
the loader to the kernel. If an SMAP is not available, an empty array
is returned.
- Add a format handler for the ACPI 3.0 SMAP structure to the sysctl(8)
binary to format the SMAP structures in a readable format similar to
the format found in boot messages.
MFC after: 2 weeks
Eventually, the vmd_segs of the struct vm_domain should become bitset
instead of long, to allow arbitrary compile-time selected maximum.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The MD allocators were very common, however there were some minor
differencies. These differencies were all consolidated in the MI allocator,
under ifdefs. The defines from machine/vmparam.h turn on features required
for a particular machine. For details look in the comment in sys/sf_buf.h.
As result no MD code left in sys/*/*/vm_machdep.c. Some arches still have
machine/sf_buf.h, which is usually quite small.
Tested by: glebius (i386), tuexen (arm32), kevlo (arm32)
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
forever in vm_handle_hlt().
This is usually not an issue as long as one of the other vcpus properly resets
or powers off the virtual machine. However, if the bhyve(8) process is killed
with a signal the halted vcpu cannot be woken up because it's sleep cannot be
interrupted.
Fix this by waking up periodically and returning from vm_handle_hlt() if
TDF_ASTPENDING is set.
Reported by: Leon Dang
Sponsored by: Nahanni Systems
The faulting instruction needs to be restarted when the exception handler
is done handling the fault. bhyve now does this correctly by setting
'vmexit[vcpu].inst_length' to zero so the %rip is not advanced.
A minor complication is that the fault injection APIs are used by instruction
emulation code that is shared by vmm.ko and bhyve. Thus the argument that
refers to 'struct vm *' in kernel or 'struct vmctx *' in userspace needs to
be loosely typed as a 'void *'.
A nested exception condition arises when a second exception is triggered while
delivering the first exception. Most nested exceptions can be handled serially
but some are converted into a double fault. If an exception is generated during
delivery of a double fault then the virtual machine shuts down as a result of
a triple fault.
vm_exit_intinfo() is used to record that a VM-exit happened while an event was
being delivered through the IDT. If an exception is triggered while handling
the VM-exit it will be treated like a nested exception.
vm_entry_intinfo() is used by processor-specific code to get the event to be
injected into the guest on the next VM-entry. This function is responsible for
deciding the disposition of nested exceptions.
instruction emulation [1].
Fix bug in emulation of opcode 0x8A where the destination is a legacy high
byte register and the guest vcpu is in 32-bit mode. Prior to this change
instead of modifying %ah, %bh, %ch or %dh the emulation would end up
modifying %spl, %bpl, %sil or %dil instead.
Add support for moffsets by treating it as a 2, 4 or 8 byte immediate value
during instruction decoding.
Fix bug in verify_gla() where the linear address computed after decoding
the instruction was not being truncated to the effective address size [2].
Tested by: Leon Dang [1]
Reported by: Peter Grehan [2]
Sponsored by: Nahanni Systems
context into memory for the kernel threads which called
fpu_kern_thread(9). This allows the fpu_kern_enter() callers to not
check for is_fpu_kern_thread() to get the optimization.
Apply the flag to padlock(4) and aesni(4). In aesni_cipher_process(),
do not leak FPU context state on error.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is needed for Xen PV(H) guests, since there's no hardware lapic
available on this kind of domains. This commit should not change
functionality.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Approved by: gibbs
amd64/include/cpu.h:
amd64/amd64/mp_machdep.c:
i386/include/cpu.h:
i386/i386/mp_machdep.c:
- Remove lapic_ipi_vectored hook from cpu_ops, since it's now
implemented in the lapic hooks.
amd64/amd64/mp_machdep.c:
i386/i386/mp_machdep.c:
- Use lapic_ipi_vectored directly, since it's now an inline function
that will call the appropiate hook.
x86/x86/local_apic.c:
- Prefix bare metal public lapic functions with native_ and mark them
as static.
- Define default implementation of apic_ops.
x86/include/apicvar.h:
- Declare the apic_ops structure and create inline functions to
access the hooks, so the change is transparent to existing users of
the lapic_ functions.
x86/xen/hvm.c:
- Switch to use the new apic_ops.
it implicitly in vmm.ko.
Add ioctl VM_GET_CPUS to get the current set of 'active' and 'suspended' cpus
and display them via /usr/sbin/bhyvectl using the "--get-active-cpus" and
"--get-suspended-cpus" options.
This is in preparation for being able to reset virtual machine state without
having to destroy and recreate it.
API function 'vie_calculate_gla()'.
While the current implementation is simplistic it forms the basis of doing
segmentation checks if the guest is in 32-bit protected mode.
of the guest linear address space. These APIs in turn use a new ioctl
'VM_GLA2GPA' to convert the guest linear address to guest physical.
Use the new copyin/copyout APIs when emulating ins/outs instruction in
bhyve(8).
'struct vm_guest_paging'.
Check for canonical addressing in vmm_gla2gpa() and inject a protection
fault into the guest if a violation is detected.
If the page table walk is restarted in vmm_gla2gpa() then reset 'ptpphys' to
point to the root of the page tables.
indicate the faulting linear address.
If the guest PML4 entry has the PG_PS bit set then inject a page fault into
the guest with the PGEX_RSV bit set in the error_code.
Get rid of redundant checks for the PG_RW violations when walking the page
tables.
the UART FIFO.
The emulation is constrained in a number of ways: 64-bit only, doesn't check
for all exception conditions, limited to i/o ports emulated in userspace.
Some of these constraints will be relaxed in followup commits.
Requested by: grehan
Reviewed by: tychon (partially and a much earlier version)
to a guest physical address.
PG_PS (page size) field is valid only in a PDE or a PDPTE so it is now
checked only in non-terminal paging entries.
Ignore the upper 32-bits of the CR3 for PAE paging.
the legacy 8259A PICs.
- Implement an ICH-comptabile PCI interrupt router on the lpc device with
8 steerable pins configured via config space access to byte-wide
registers at 0x60-63 and 0x68-6b.
- For each configured PCI INTx interrupt, route it to both an I/O APIC
pin and a PCI interrupt router pin. When a PCI INTx interrupt is
asserted, ensure that both pins are asserted.
- Provide an initial routing of PCI interrupt router (PIRQ) pins to
8259A pins (ISA IRQs) and initialize the interrupt line config register
for the corresponding PCI function with the ISA IRQ as this matches
existing hardware.
- Add a global _PIC method for OSPM to select the desired interrupt routing
configuration.
- Update the _PRT methods for PCI bridges to provide both APIC and legacy
PRT tables and return the appropriate table based on the configured
routing configuration. Note that if the lpc device is not configured, no
routing information is provided.
- When the lpc device is enabled, provide ACPI PCI link devices corresponding
to each PIRQ pin.
- Add a VMM ioctl to adjust the trigger mode (edge vs level) for 8259A
pins via the ELCR.
- Mark the power management SCI as level triggered.
- Don't hardcode the number of elements in Packages in the source for
the DSDT. iasl(8) will fill in the actual number of elements, and
this makes it simpler to generate a Package with a variable number of
elements.
Reviewed by: tycho
with all bits set to 1 beyond the I/O permission bitmap.
Prior to this change accessing I/O ports [0xFFF8-0xFFFF] would trigger a
#GP fault even though the I/O bitmap allowed access to those ports.
For more details see section "I/O Permission Bit Map" in the Intel SDM, Vol 1.
Reviewed by: kib
