certain conditions. I haven't been able to find a better solution yet:
- Set a two read-only variables (${prefix} and ${etcdir}). This is
especially useful when using /etc/rc.d scripts with third-party
software installed from ports.
- Fix rc.d/sshd to work with openssh from ports using ${etcdir}
instead of hardcoded /etc.
- Reflect prefix/etcdir changes in rc.subr.8.
src/etc/rc.d/sshd: rev 1.9 -> 1.10
src/etc/rc.subr: rev 1.51 -> 1.52
src/share/man/man8/rc.subr.8: rev 1.11 -> 1.12
Approved by: cperciva (mentor)
it limits the width of its output to the value of $COLUMNS, or
what TIOCGWINSZ reports, or 79 columns. We should specify -ww
to ps(1) so that it removes the limit and prints lines in full.
Otherwise very long command pathnames could be mishandled, e.g.,
by _find_processes().
MFC after: 1 week
The order in _doit must be "nice su", not "su nice", for that.
In addition, don't ignore the exit status from "cd $foo_chdir".
Reviewed by: freebsd-rc (silence)
MFC after: 1 week
of them do that conditionally depending on kldstat. The code is
duplicated all over, but bugs can be uniqie.
To make the things more consistent, introduce a new rc.subr function,
load_kld, which takes care of loading a kernel module conditionally.
(Found this lying for a while in my p4 branch for various hacks.)
scripts. These scripts handle vnode backed md(4) devices.
Old ramdisk{,-own} scripts will stay a bit in CVS to allow some time for
migration since variable names have changed (ramdisk_* -> mdconfig_*).
Two new variables have been introduced to be able to populate the md(4)
device once it has been mounted (mdconfig_*_files and mdconfig_*_cmd).
Use should be as easy as:
mdconfig_md0="-t malloc -s 10m"
mdconfig_md1="-t vnode -f /var/foo.img"
See rc.conf(5) for more information and description of the additional
variables.
Approved by: cperciva
- Sync with latest version from NetBSD.
'In order to handle some perl scripts running as daemons, add a
pattern which also matches "`basename $interpreter`: $command" in the
ps listing.'
Approved by: cperciva (mentor)
Obtained from: NetBSD
MFC after: 1 week
especially useful when using /etc/rc.d scripts with third-party
software installed from ports.
- Fix rc.d/sshd to work with openssh from ports using ${etcdir}
instead of hardcoded /etc.
Reviewed by: brooks
Approved by: cperciva (mentor)
MFC after: 1 week
every now and then. It is up to the caller to choose a proper
action upon an error condition. Therefore, use return, not exit,
except for some special cases.
Consistently return 1 to indicate an error.
Submitted by: sem (initially)
Reviewed by: freebsd-rc (silence)
MFC after: 2 weeks
source it into the shell. If not, handle it in a subshell the same
way that "real" rc.d-style scripts are handled. This will dramatically
ease the "process local scripts in the base rcorder" transition.
Add *.bak to the list of files in */rc.d that we ignore.
the base rcorder. This is accomplished by running rcorder twice,
first to get all the disks mounted (through mountcritremote),
then again to include the local_startup directories.
This dramatically changes the behavior of rc.d/localpkg, as
all "local" scripts that have the new rc.d semantics are now
run in the base rcorder, so only scripts that have not been
converted yet will run in rc.d/localpkg.
Make a similar change in rc.shutdown, and add some functions in
rc.subr to support these changes.
Bump __FreeBSD_version to reflect this change.
to issue sub-commands, e.g., restart = stop + start.
By calling run_rc_command instead, we provide rc.d
scripts with full control over their configuration
variables.
For an example problem the former approach caused, see
http://lists.freebsd.org/pipermail/freebsd-rc/2005-October/000311.html
Reviewed by: freebsd-rc
Tested by: Dirk Engling erdgeist <at> erdgeist.org
MFC after: 2 weeks
has been set in the first place. This should reduce
unwanted side-effects in rc.d scripts that don't mean
to use $command and rc.subr(8) methods associated with
it at all.
Discussed with: brooks
Reviewed by: -rc (silence)
a list of possible keywords, not all them in a single argument.
This also fixes the issue of extra delimiter characters appearing
on the help line from rc.d scripts not setting $extra_commands.
Now this flag can be set, or not set, for memory-backed
file systems on individual basis, as illustrated by the
rc.conf(5) variables tmpmfs_flags and varmfs_flags. The
flag is set for those FS'en by default, in /etc/defaults/rc.conf,
in order to stay compatible with the old rc.subr behaviour.
Submitted by: marck
MFC after: 3 days
rc.d/geli - configures encryption (ask for passphrases, etc.);
rc.d/geli2 - is called after file systems are mounted and mark devices for
detach on last close.
Sponsored by: Wheel Sp. z o.o.
http://www.wheel.pl
MFC after: 3 days
These can be used to pass extra options to the mdmfs(8) utility,
to customize the finer details of the md file system creation
(i.e. to turn on/off softupdates, to specify a default owner for md
filesystem, etc).
Use these two new flags to mount tmpmfs and varmfs without
softupdates, since it doesn't make much sense to use SU on
malloc-backed file systems.
Reviewed by: mtm
Inspired by: J. D. Bronson, jbronson at wixb dot com
than one interface from the command line:
# /etc/rc.d/netif start bfe0 xl0
It's also possible to restart an interface(s):
# /etc/rc.d/netif restart bfe0
This required some changes to rc.subr(8) so that if the start/stop commands
are overidden the rest of the command line (after the start/stop/etc... cmd)
is passed through to the subroutines.
if [ -z "${_rc_subr_loaded}" ]; then
_rc_subr_loaded="YES"
...
fi
in order to avoid re-interpreting rc.subr every time an rc.d
script is run. In my tests, this speeds up rc time by about
8-10%.
Most notably, this cleans up messages when shutting down from
single user. In such a case there are usually no daemons running,
but their pid files are still in /var/run. This causes rc.d to
output diagnostics about daemons with pidfiles, but that are
not running.
hostname, resolve, tmp, and var scripts. The latter three are new and
were repo copied. These scripts no longer depend on being booted with
and NFS root instead attempt to automaticly create mfs /tmp and /var
volumes if the they are not writable. This behavior can be overridden
in /etc/rc.conf.
Reviewed by: luigi, pjd
they exit. Sometimes they simply can't (core-dump, for example).
So, when searching for a running program send standard error
output from ps(1) to never-never land.
# This should quite those
# ps: kvm_getprocs: No such user
# errors. Since ports use a duplicate rc.subr(8) you might
# still see this error from ports startup scripts.
Implement ``one'' prefix to allow a "one shot" operation as if
${rcvar}=yes yet all the other prerequisite tests are still performed.
The existing ``force'' prefix is a sledgehammer that ignores all the
prerequisite checks and always returns a zero exit status; this is a
more gentle approach to the problem of "manipulate this disabled
service without editing rc.conf(5)".
Obtained From: NetBSD
# We have a work-around in our version of rc.subr that
# makes force* return a non-zero exit status if the
# command/service could not be acted upon. The work-around
# is no longer necessary and should be removed.
run_rc_command(): when checking if ${command} exists before executing it,
be sure to check under ${name_chroot} (if set).
Fix from Ed Ravin in [bin/18523]
Obtained From: NetBSD
Change how internal boolean variables are used to:
if ! ${_somevar:-false}; then
_somevar=true
fi
(Consisent, slightly quicker, and slightly cleaner)
Obtained from: NetBSD
