Commit Graph

109 Commits

Author SHA1 Message Date
Marcel Moolenaar
0f0d108e27 In afd_describe(), don't initialize sizestring. On ia64, gcc(1) will
generate code that calls memset, which we don't have in the kernel.

MFC after: 3 days
2006-03-30 05:29:57 +00:00
Søren Schmidt
6f1b833f36 Properly use the sense key info 2006-03-18 13:14:38 +00:00
Søren Schmidt
de0ed44e2f Bail out of afd_sense if ENODEV. 2006-03-08 09:21:48 +00:00
Søren Schmidt
f09934b191 Poll device for readiness before trying to get geometry etc. 2006-03-07 16:05:38 +00:00
Søren Schmidt
b83fcd52ba Update atapi-fd to support direct devices such as disks. 2006-03-05 20:30:54 +00:00
Søren Schmidt
e2bf77c5c2 Get rid of the advertising clause in the copyright. 2006-01-05 21:27:19 +00:00
Robert Watson
5bb84bc84b Normalize a significant number of kernel malloc type names:
- Prefer '_' to ' ', as it results in more easily parsed results in
  memory monitoring tools such as vmstat.

- Remove punctuation that is incompatible with using memory type names
  as file names, such as '/' characters.

- Disambiguate some collisions by adding subsystem prefixes to some
  memory types.

- Generally prefer lower case to upper case.

- If the same type is defined in multiple architecture directories,
  attempt to use the same name in additional cases.

Not all instances were caught in this change, so more work is required to
finish this conversion.  Similar changes are required for UMA zone names.
2005-10-31 15:41:29 +00:00
Søren Schmidt
6667b30d15 Change the way ioctls are issue to ATA.
The most prominent part is that its now possible to issue ata_requests
directly to say acd0, instead of going through the cumbersome /dev/ata
device.
2005-05-16 13:07:27 +00:00
Søren Schmidt
0068f98f88 Take newbusification one step further, ie use the device_t more consequently
all way through the code down the layers, instead of the mix'n'match that
resulted from the conversion done earlier.

Sponsored by:	pair.com
2005-04-30 16:22:07 +00:00
Søren Schmidt
9f2ea2bcd5 Move the creation of ata_channel child devices to the channel code.
This allows to attach to the children (ATA devices) even without a
driver being attached. This allows atapi-cam to do its work both
with and without the pure ATAPI driver being present.

ATA patches by /me
ATAPI-cam pathes by Thomas
2005-04-15 10:20:52 +00:00
Søren Schmidt
5a5b148dd8 Change the ata_* methods to use a channel device instead of a
controller device. This helps when there is no controller parent
to a channel (PPC port).
2005-03-31 15:05:40 +00:00
Søren Schmidt
8ca4df3299 This is the much rumoured ATA mkIII update that I've been working on.
o       ATA is now fully newbus'd and split into modules.
        This means that on a modern system you just load "atapci and ata"
        to get the base support, and then one or more of the device
        subdrivers "atadisk atapicd atapifd atapist ataraid".
        All can be loaded/unloaded anytime, but for obvious reasons you
        dont want to unload atadisk when you have mounted filesystems.

o       The device identify part of the probe has been rewritten to fix
        the problems with odd devices the old had, and to try to remove
        so of the long delays some HW could provoke. Also probing is done
	without the need for interrupts, making earlier probing possible.

o       SATA devices can be hot inserted/removed and devices will be created/
        removed in /dev accordingly.
	NOTE: only supported on controllers that has this feature:
	Promise and Silicon Image for now.
	On other controllers the usual atacontrol detach/attach dance is
	still needed.

o	Support for "atomic" composite ATA requests used for RAID.

o       ATA RAID support has been rewritten and and now supports these
        metadata formats:
                 "Adaptec HostRAID"
                 "Highpoint V2 RocketRAID"
                 "Highpoint V3 RocketRAID"
                 "Intel MatrixRAID"
                 "Integrated Technology Express"
                 "LSILogic V2 MegaRAID"
                 "LSILogic V3 MegaRAID"
                 "Promise FastTrak"
                 "Silicon Image Medley"
		 "FreeBSD PseudoRAID"

o       Update the ioctl API to match new RAID levels etc.

o       Update atacontrol to know about the new RAID levels etc
        NOTE: you need to recompile atacontrol with the new sys/ata.h,
        make world will take care of that.
	NOTE2: that rebuild is done differently from the old system as
	the rebuild is now done piggybacked on read requests to the
	array, so atacontrol simply starts a background "dd" to rebuild
	the array.

o       The reinit code has been worked over to be much more robust.

o       The timeout code has been overhauled for races.

o	Support of new chipsets.

o       Lots of fixes for bugs found while doing the modulerization and
        reviewing the old code.

Missing or changed features from current ATA:

o       atapi-cd no longer has support for ATAPI changers. Todays its
        much cheaper and alot faster to copy those CD images to disk
        and serve them from there. Besides they dont seem to be made
        anymore, maybe for that exact reason.

o       ATA RAID can only read metadata from all the above metadata formats,
	not write all of them (Promise and Highpoint V2 so far). This means
	that arrays can be picked up from the BIOS, but they cannot be
	created from FreeBSD. There is more to it than just the missing
	write metadata support, those formats are not unique to a given
	controller like Promise and Highpoint formats, instead they exist
	for several types, and even worse, some controllers can have
	different formats and its impossible to tell which one.
	The outcome is that we cannot reliably create the metadata of those
	formats and be sure the controller BIOS will understand it.
	However write support is needed to update/fail/rebuild the arrays
	properly so it sits fairly high on the TODO list.

o       So far atapicam is not supported with these changes. When/if this
	will change is up to the maintainer of atapi-cam so go there for
	questions.

HW donated by:  Webveveriet AS
HW donated by:  Frode Nordahl
HW donated by:  Yahoo!
HW donated by:  Sentex
Patience by:	Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
Søren Schmidt
d5a9dcbf23 Add firmware revision to probe printf. 2004-08-05 21:11:33 +00:00
Søren Schmidt
29dc49f725 Use the right ordering of args on mtx_init(). No functional changes
since the args in question was all zero's.

Found by: Jimmy Olgeni <olgeni@FreeBSD.org>
2004-06-22 11:18:25 +00:00
Søren Schmidt
e7c9858a8f Remember to mtx_destroy mutexes. 2004-03-01 13:17:07 +00:00
Poul-Henning Kamp
0b7ed341e1 Change the disk(9) API in order to make device removal more robust.
Previously the "struct disk" were owned by the device driver and this
gave us problems when the device disappared and the users of that device
were not immediately disappearing.

Now the struct disk is allocate with a new call, disk_alloc() and owned
by geom_disk and just abandonned by the device driver when disk_create()
is called.

Unfortunately, this results in a ton of "s/\./->/" changes to device
drivers.

Since I'm doing the sweep anyway, a couple of other API improvements
have been carried out at the same time:

The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to
DISKFLAG_NEEDSGIANT

A version number have been added to disk_create() so that we can detect,
report and ignore binary drivers with old ABI in the future.

Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
Søren Schmidt
816994ccc8 Use the biotask functionality in GEOM to put finished requests on
instead of taskqueue_swi. This shaves from 1 to 10% of the overhead.

Overhaul the locking once more, there was a few possible races that
are now closed.
2004-01-28 20:38:51 +00:00
Søren Schmidt
5df3ca789c Use UMA instead of plain malloc for getting ATA request storage.
This gives +10% performance on simple tests, so definitly worth it.
A few percent more could be had by not using M_ZERO'd alloc's, but
we then need to clear fields all over the place to be safe, and
that was deemed not worth the trouble (and it makes life dangerous).
2004-01-14 21:26:35 +00:00
Søren Schmidt
45a0b23e06 Always return ENOMEM if ata_request_alloc fails so GEOM can dtrt. 2004-01-12 09:33:10 +00:00
Søren Schmidt
a7a120f649 Overhaul of the timeout/reinit framework. This should clear up most
of the leftovers from the old version that really doesn't work anymore.

Add a reset function for host-end of the ATA channel. This is needed
for the SiI3112 in order to whack it back to reality if a device
locks up the SATA interface (thereby preventing that we can reset the
device). The result is that ATA now recovers from the timeouts that
happens with the SiI3112A and more or less all disks based on old
PATA electronics with a Marvell PATA->SATA converter. This includes
lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
Søren Schmidt
1bebf0fbc9 Centralise mode setting. Instead of doing it in all subdrivers, do
it in ata-all.c where it belongs.

Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
Søren Schmidt
9f06a4277f Unify prototypes.
Cosmetics.
2003-08-25 09:01:49 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Søren Schmidt
5fdbb0d222 This is a major rework of the ATA driver (ATAng)
Restructure the way ATA/ATAPI commands are processed, use a common
ata_request structure for both. This centralises the way requests
are handled so locking is much easier to handle.

The driver is now layered much more cleanly to seperate the lowlevel
HW access so it can be tailored to specific controllers without touching
the upper layers. This is needed to support some of the newer
semi-intelligent ATA controllers showing up.

The top level drivers (disk, ATAPI devices) are more or less still
the same with just corrections to use the new interface.

Pull ATA out from under Gaint now that locking can be done in a sane way.

Add support for a the National Geode SC1100. Thanks to Soekris engineering
for sponsoring a Soekris 4801 to make this support.

Fixed alot of small bugs in the chipset code for various chips now
we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
Poul-Henning Kamp
891619a66d Use bioq_flush() to drain a bio queue with a specific error code.
Retain the mistake of not updating the devstat API for now.

Spell bioq_disksort() consistently with the remaining bioq_*().

#include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
Poul-Henning Kamp
60794e0478 Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
Poul-Henning Kamp
3e7b60db4b NO_GEOM cleanup:
Convert to "struct disk *" centric API.

OK'ed by:	sos
2003-02-28 09:53:36 +00:00
Poul-Henning Kamp
b82ff75854 NO_GEOM cleanup:
Change the argument to disk_destroy() to be the same struct disk * as
disk_create() takes.

This enables drivers to ignore the (now) bogus dev_t which disk_create()
returns.
2003-02-21 15:13:26 +00:00
Søren Schmidt
bb5bdd386e First round off updates/fixes to the ATA driver.
This moves all chipset specific code to a new file 'ata-chipset.c'.
Extensive use of tables and pointers to avoid having the same switch
on chipset type in several places, and to allow substituting various
functions for different HW arch needs.
Added PIO mode setup and all DMA modes.
Support for all known SiS chipsets. Thanks to Christoph Kukulies for
sponsoring a nice ASUS P4S8X SiS648 based board for this work!

Tested on:	i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
Poul-Henning Kamp
1686ac18f9 NO_GEOM cleanup: retire disk_invalidate() 2003-01-30 19:43:50 +00:00
Søren Schmidt
8ba4488cea Add support for the PC98 platform to the ATA driver.
This mostly consists of functionality to serialize accesses to
the two ATA channels (which can also be used to "fix" certain
PCI based controllers).
Add support for Acard controllers.
Enable the ATA driver in PC98 GENERIC, and add device hints.
Update man page with latest support.

The PC98 core team has kindly provided me with a PC98
machine that made this all possible, thanks to all that
contributed to that effort, without that this would
probably newer have been possible..

Approved by: re@
2002-12-03 20:20:44 +00:00
Poul-Henning Kamp
7812d86f03 (This commit touches about 15 disk device drivers in a very consistent
and predictable way, and I apologize if I have gotten it wrong anywhere,
getting prior review on a patch like this is not feasible, considering
the number of people involved and hardware availability etc.)

If struct disklabel is the messenger: kill the messenger.

Inside struct disk we had a struct disklabel which disk drivers used to
communicate certain metrics to the disklayer above (GEOM or the disk
mini-layer).  This commit changes this communication to use four
explicit fields instead.

Amongst the benefits is that the fields do not get overwritten by
wrong or bogus on-disk disklabels.

Once that is clear, <sys/disk.h> which is included in the drivers
no longer need to pull <sys/disklabel.h> and <sys/diskslice.h> in,
the few places that needs them, have gotten explicit #includes for
them.

The disklabel inside struct disk is now only for internal use in
the disk mini-layer, so instead of embedding it, we malloc it as
we need it.

This concludes (modulus any mistakes) the series of disklabel related
commits.

I belive it all amounts to a NOP for all the rest of you :-)

Sponsored by:   DARPA & NAI Labs.
2002-09-20 19:36:05 +00:00
Søren Schmidt
b3d86d9ca2 OK, dont rely on the upper layers handling iosize_max correctly,
instead rely on ATAPI devices ability to do the work instead.

MFC material.
2002-07-28 23:59:00 +00:00
Søren Schmidt
23a5f1b91a Properly change the block_size on different CD media, and use that
to calculate the max amount of data in one IO request.

Correct the max size on atapi floppies/tapes as well.
2002-07-27 12:22:39 +00:00
Søren Schmidt
aafa7ea069 Fix the max transfer size for ATAPI devices. The spec says to
transfer at most 65534 bytes, thats 126 times DEV_BSIZE not 252 :(

Pointed out by: Ian Dowse <iedowse@maths.tcd.ie>
2002-07-26 19:13:05 +00:00
Søren Schmidt
ba41a3d37e Fix the transfer size calculation. 2002-07-22 18:37:33 +00:00
Søren Schmidt
9153cecd64 Use si_iosize_max to tell the upper layers not to use more
than 32K chunks on ZIP drives instead of deblocking it in
the driver.
2002-06-19 12:41:05 +00:00
Bruce Evans
e788f79698 Fixed printf format errors which apparently crept in while -Wformat was
disabled for gcc-3.
2002-05-25 11:18:03 +00:00
Søren Schmidt
7800211b08 Make the ATA driver compile & work on the sparc64 platform.
Initial work & code by tmm.

Lots of changes and rearrangements by yours truely to make busdma
be a little less a PITA (but I still dont like it).
2002-04-05 13:13:56 +00:00
Søren Schmidt
d42c4a3ba6 Misc little cleanups. 2002-03-26 09:31:22 +00:00
Søren Schmidt
fe86c44885 Add new support for locking an ATA channel and use that throughout
the ATA/ATAPI driver. This solves the concurrency problem with
the new GEOM code, and also cuts a good deal of the patch size
in the upcoming MFC.
2002-03-11 21:04:32 +00:00
Søren Schmidt
6ddce9039b Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.

A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.

Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.

Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.

Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.

If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.

Misc fixes that I had lying around for various minor bugs.

Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
Søren Schmidt
f601b4eb7c Overhaul to minimize stack usage, in some places >2K was used
on the stack *blush*...
2001-09-20 15:25:36 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Poul-Henning Kamp
079f2df393 Make the disk mini-layer check for and handle zero-length transfers
instead of the underlying drivers.
2001-05-06 21:55:22 +00:00
Poul-Henning Kamp
a468031ce8 Actually biofinish(struct bio *, struct devstat *, int error) is more general
than the bioerror().

Most of this patch is generated by scripts.
2001-05-06 20:00:03 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Søren Schmidt
256d331f31 Set the device names as early as possible. 2001-03-21 11:49:07 +00:00
Søren Schmidt
a2dca80a1d Provide the interface to atacontrol and associated logic.
see atacontrol(8) for more.

Also the ATA_ENABLE_ATAPI_DMA, ATA_ENABLE_WC and ATA_ENABLE_TAGS
options are gone, use the tuneables listed in ata.4 instead from
the loader (this makes it possible to switch off DMA before the
driver has to touch the devices on broken hardware).
2001-03-15 15:36:25 +00:00
Søren Schmidt
8fab4242e4 Add support for the IOMEGA Clik!
IOMEGA deserves a medal for making the most nonstandard ATAPI
devices, if they are ignorant or just not smart enough I don't
know, but somebody should help them out of their misery...
2001-03-14 12:12:46 +00:00