Commit Graph

175 Commits

Author SHA1 Message Date
Pedro F. Giffuni
718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00
Scott Long
55550830cf As with r323317, hold off on releasing the intrhook during boot until
we're ready to accept probing from GEOM.  Untested, but the pattern is
the same as with aac.
2017-09-08 17:40:29 +00:00
Alan Somers
4195c7de24 Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name)
The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/camcontrol/camcontrol.c, which assumes they'll be null-terminated.
However, the kernel doesn't null-terminate them. A bunch of copy-pasted code
uses strncpy to write them, and doesn't guarantee null-termination. For at
least 4 drivers (mpr, mps, ciss, and hyperv), the hba_vid field actually
overflows. You can see the result by doing "camcontrol negotiate da0 -v".

This change null-terminates those fields everywhere they're set in the
kernel. It also shortens a few strings to ensure they'll fit within the
16-character field.

PR:		215474
Reported by:	Coverity
CID:		1009997 1010000 1010001 1010002 1010003 1010004 1010005
CID:		1331519 1010006 1215097 1010007 1288967 1010008 1306000
CID:		1211924 1010009 1010010 1010011 1010012 1010013 1010014
CID:		1147190 1010017 1010016 1010018 1216435 1010020 1010021
CID:		1010022 1009666 1018185 1010023 1010025 1010026 1010027
CID:		1010028 1010029 1010030 1010031 1010033 1018186 1018187
CID:		1010035 1010036 1010042 1010041 1010040 1010039
Reviewed by:	imp, sephe, slm
MFC after:	4 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D9037
Differential Revision:	https://reviews.freebsd.org/D9038
2017-01-04 20:26:42 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Pedro F. Giffuni
057b4402bf sys/dev: extend use of the howmany() macro when available.
We have a howmany() macro in the <sys/param.h> header that is
convenient to re-use as it makes things easier to read.
2016-04-26 15:03:15 +00:00
Warner Losh
34d4518209 Don't assume that bio_cmd is a bitfield.
Differential revision: https://reviews.freebsd.org/D5590
2016-03-10 00:36:52 +00:00
Alexander Motin
6f954fb36b Remove MAXBSIZE use from drivers where it has nothing to do.
In some cases limits are just not needed, in others -- DFLTPHYS is the
right constant to use instead.

MFC after:	1 month
2015-03-22 16:10:28 +00:00
Warner Losh
0f31ca6217 Set but not used variables eliminated. 2014-08-08 11:47:09 +00:00
Marcel Moolenaar
e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00
Hans Petter Selasky
af3b2549c4 Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
Glen Barber
37a107a407 Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output,
such as:

 1) no output from sysctl(8)
 2) erroneously returning ENOMEM with tools like truss(1)
    or uname(1)
 truss: can not get etype: Cannot allocate memory
2014-06-27 22:05:21 +00:00
Hans Petter Selasky
3da1cf1e88 Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after:	2 weeks
Sponsored by:	Mellanox Technologies
2014-06-27 16:33:43 +00:00
John Baldwin
aced5239b2 Add missing calls to bus_dmamap_unload() when freeing static DMA
allocations.

Reviewed by:	scottl
2014-06-13 18:20:44 +00:00
Robert Watson
4a14441044 Update kernel inclusions of capability.h to use capsicum.h instead; some
further refinement is required as some device drivers intended to be
portable over FreeBSD versions rely on __FreeBSD_version to decide whether
to include capability.h.

MFC after:	3 weeks
2014-03-16 10:55:57 +00:00
Pawel Jakub Dawidek
7008be5bd7 Change the cap_rights_t type from uint64_t to a structure that we can extend
in the future in a backward compatible (API and ABI) way.

The cap_rights_t represents capability rights. We used to use one bit to
represent one right, but we are running out of spare bits. Currently the new
structure provides place for 114 rights (so 50 more than the previous
cap_rights_t), but it is possible to grow the structure to hold at least 285
rights, although we can make it even larger if 285 rights won't be enough.

The structure definition looks like this:

	struct cap_rights {
		uint64_t	cr_rights[CAP_RIGHTS_VERSION + 2];
	};

The initial CAP_RIGHTS_VERSION is 0.

The top two bits in the first element of the cr_rights[] array contain total
number of elements in the array - 2. This means if those two bits are equal to
0, we have 2 array elements.

The top two bits in all remaining array elements should be 0.
The next five bits in all array elements contain array index. Only one bit is
used and bit position in this five-bits range defines array index. This means
there can be at most five array elements in the future.

To define new right the CAPRIGHT() macro must be used. The macro takes two
arguments - an array index and a bit to set, eg.

	#define	CAP_PDKILL	CAPRIGHT(1, 0x0000000000000800ULL)

We still support aliases that combine few rights, but the rights have to belong
to the same array element, eg:

	#define	CAP_LOOKUP	CAPRIGHT(0, 0x0000000000000400ULL)
	#define	CAP_FCHMOD	CAPRIGHT(0, 0x0000000000002000ULL)

	#define	CAP_FCHMODAT	(CAP_FCHMOD | CAP_LOOKUP)

There is new API to manage the new cap_rights_t structure:

	cap_rights_t *cap_rights_init(cap_rights_t *rights, ...);
	void cap_rights_set(cap_rights_t *rights, ...);
	void cap_rights_clear(cap_rights_t *rights, ...);
	bool cap_rights_is_set(const cap_rights_t *rights, ...);

	bool cap_rights_is_valid(const cap_rights_t *rights);
	void cap_rights_merge(cap_rights_t *dst, const cap_rights_t *src);
	void cap_rights_remove(cap_rights_t *dst, const cap_rights_t *src);
	bool cap_rights_contains(const cap_rights_t *big, const cap_rights_t *little);

Capability rights to the cap_rights_init(), cap_rights_set(),
cap_rights_clear() and cap_rights_is_set() functions are provided by
separating them with commas, eg:

	cap_rights_t rights;

	cap_rights_init(&rights, CAP_READ, CAP_WRITE, CAP_FSTAT);

There is no need to terminate the list of rights, as those functions are
actually macros that take care of the termination, eg:

	#define	cap_rights_set(rights, ...)				\
		__cap_rights_set((rights), __VA_ARGS__, 0ULL)
	void __cap_rights_set(cap_rights_t *rights, ...);

Thanks to using one bit as an array index we can assert in those functions that
there are no two rights belonging to different array elements provided
together. For example this is illegal and will be detected, because CAP_LOOKUP
belongs to element 0 and CAP_PDKILL to element 1:

	cap_rights_init(&rights, CAP_LOOKUP | CAP_PDKILL);

Providing several rights that belongs to the same array's element this way is
correct, but is not advised. It should only be used for aliases definition.

This commit also breaks compatibility with some existing Capsicum system calls,
but I see no other way to do that. This should be fine as Capsicum is still
experimental and this change is not going to 9.x.

Sponsored by:	The FreeBSD Foundation
2013-09-05 00:09:56 +00:00
Scott Long
c68534f1d5 Update PCI drivers to no longer look at the MEMIO-enabled bit in the PCI
command register.  The lazy BAR allocation code in FreeBSD sometimes
disables this bit when it detects a range conflict, and will re-enable
it on demand when a driver allocates the BAR.  Thus, the bit is no longer
a reliable indication of capability, and should not be checked.  This
results in the elimination of a lot of code from drivers, and also gives
the opportunity to simplify a lot of drivers to use a helper API to set
the busmaster enable bit.

This changes fixes some recent reports of disk controllers and their
associated drives/enclosures disappearing during boot.

Submitted by:	jhb
Reviewed by:	jfv, marius, achadd, achim
MFC after:	1 day
2013-08-12 23:30:01 +00:00
Konstantin Belousov
dd0b4fb6d5 Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c.  It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code.  The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync().  Previously this was done in a type specific
way.  Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by:	jeff (sponsored by EMC/Isilon)
Reviewed by:	kan (previous version), scottl,
	mjacob (isp(4), no objections for target mode changes)
Discussed with:	     ian (arm changes)
Tested by:	marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
	amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
2013-02-12 16:57:20 +00:00
John Baldwin
f8d6c20a0f Further adjust the workaround in r234501. Rounding all small requests up
to 32k swamped the controller causing firmware hangs.  Instead, round
requests smaller than 64k up to the next power of 2 as a general rule.
To handle the one known special case of a command that accepts a 12k
buffer returning a 24k-ish reply, round requests between 8k and 16k up
to 32k rather than 16k.  The result is that commands less than 8k should
now be rounded up to a smaller size (either 4k or 8k) rather than 32k.

PR:		kern/155658
Tested by:	Andreas Longwitz
MFC after:	1 week
2012-10-05 15:52:31 +00:00
John Baldwin
26e76e98ef As a followup to r234501, ensure that the native ioctl path always allocates
a 4kb buffer if a request uses a buffer size of 0.  (The Linux ioctl path
already did this.)

PR:		kern/155658
Submitted by:	Andreas Longwitz
MFC after:	1 week
2012-09-19 11:54:32 +00:00
Scott Long
6aedf62f32 Essentially revert r239912. The amr_periodic function hadn't been armed in
over 10 years and was dead code; the previous revision exposed it as such to
CLANG.  The solution is to cull the whole thing.
2012-08-31 09:42:46 +00:00
John Baldwin
28435fb7f6 Use callout(9) rather than timeout(9). Note that the periodic timer in
amr(4) is never started, so this should be even more of a NOP than
normal.
2012-08-30 17:37:01 +00:00
John Baldwin
ce4857d146 The amr(4) firmware contains a rather dubious "feature" where it
assumes for small buffers (< 64k) that the OS driver is actually using
a buffer rounded up to the next power of 2.  It also assumes that the
buffer is at least 4k in size.  Furthermore, there is at least one
known instance of megarc sending a request with a 12k buffer where the
firmware writes out a 24k-ish reply.

To workaround the data corruption triggered by this "feature", ensure
that buffers for user commands use a minimum size of 32k, and that
buffers between 32k and 64k use a 64k buffer.

PR:		kern/155658
Submitted by:	Andreas Longwitz  longwitz incore de
Reviewed by:	scottl
MFC after:	1 week
2012-04-20 20:27:31 +00:00
Scott Long
b6f97155cc Convert a number of drivers to obtaining their parent DMA tag from their
PCI device attachment.
2012-03-12 08:03:51 +00:00
Kevin Lo
bf78cb3887 Fix checks for error return from amr_sglist_map() and amr_ccb_map() 2012-02-28 15:09:56 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Robert Watson
a9d2f8d84f Second-to-last commit implementing Capsicum capabilities in the FreeBSD
kernel for FreeBSD 9.0:

Add a new capability mask argument to fget(9) and friends, allowing system
call code to declare what capabilities are required when an integer file
descriptor is converted into an in-kernel struct file *.  With options
CAPABILITIES compiled into the kernel, this enforces capability
protection; without, this change is effectively a no-op.

Some cases require special handling, such as mmap(2), which must preserve
information about the maximum rights at the time of mapping in the memory
map so that they can later be enforced in mprotect(2) -- this is done by
narrowing the rights in the existing max_protection field used for similar
purposes with file permissions.

In namei(9), we assert that the code is not reached from within capability
mode, as we're not yet ready to enforce namespace capabilities there.
This will follow in a later commit.

Update two capability names: CAP_EVENT and CAP_KEVENT become
CAP_POST_KEVENT and CAP_POLL_KEVENT to more accurately indicate what they
represent.

Approved by:	re (bz)
Submitted by:	jonathan
Sponsored by:	Google Inc
2011-08-11 12:30:23 +00:00
Matthew D Fleming
370808da5f Fix clang warning on empty statement.
Reviewed by:    rdivacky, zml
Approved by:    zml (mentor)
2010-07-28 16:24:11 +00:00
Martin Blapp
c2ede4b379 Remove extraneous semicolons, no functional changes.
Submitted by:	Marc Balmer <marc@msys.ch>
MFC after:	1 week
2010-01-07 21:01:37 +00:00
Christian Brueffer
af57883569 Remove spurious )
PR:		137758
Submitted by:	Henning Petersen <henning.petersen@t-online.de>
MFC after:	1 week
2009-10-28 15:22:58 +00:00
Poul-Henning Kamp
6778431478 Revert previous commit and add myself to the list of people who should
know better than to commit with a cat in the area.
2009-09-08 13:19:05 +00:00
Poul-Henning Kamp
b34421bf9c Add necessary include. 2009-09-08 13:16:55 +00:00
John Baldwin
a56fe095f0 Temporarily revert the new-bus locking for 8.0 release. It will be
reintroduced after HEAD is reopened for commits by re@.

Approved by:	re (kib), attilio
2009-08-20 19:17:53 +00:00
Attilio Rao
444b91868b Make the newbus subsystem Giant free by adding the new newbus sxlock.
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.

Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.

For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.

Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.

Bump __FreeBSD_version in order to reflect the newbus lock introduction.

Reviewed by:    ed, hps, jhb, imp, mav, scottl
No answer by:   ariff, thompsa, yongari
Tested by:      pho,
                G. Trematerra <giovanni dot trematerra at gmail dot com>,
                Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by:   Yahoo! Incorporated
Approved by:	re (ksmith)
2009-08-02 14:28:40 +00:00
Warner Losh
00b4e54ae7 We no longer need to use d_thread_t, migrate to struct thread *. 2009-05-20 17:29:21 +00:00
Scott Long
64c71632bf Move the CAM passthrough code into a true module so that it doesn't have to be
compiled into the main AMR driver.  It's code that is nice to have but not
required for normal operation, and it is reported to cause problems for some
people.
2008-11-03 00:53:54 +00:00
Ed Schouten
6bfa9a2d66 Replace all calls to minor() with dev2unit().
After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.

This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.

Reviewed by:	kib
2008-09-27 08:51:18 +00:00
Scott Long
92130a8f2e While spin-waiting for the mailbox semaphore to update, do flushing reads of
PCI bus so that we don't have to wait more than needed.
2008-07-20 16:50:14 +00:00
Scott Long
1a6b516979 Remove an errant definition for AMR_CONFIG_ENQ3_SOLICITED NOTIFY that was
accidently reverted in the previous commit.
2008-02-06 14:26:31 +00:00
Scott Long
74018414bf Many improvements that have been collected over time:
- Improve error handling for load operations.
- Fix a memory corruption bug when using certain linux management apps.
- Allocate all commands up front to avoid OOM deadlocks later on.
2008-01-24 07:26:53 +00:00
Scott Long
281017a577 Rewrite the DMA code paths from being an impenitrable maze of special cases
to a much saner and simplier unified code path.  Along the way, fix various
CAM nits and bugs so that the passthrough works correctly for all cases.
2007-12-12 05:55:03 +00:00
Scott Long
cdc03cc897 Provide unqiue malloc types instead of using M_DEVBUF. 2007-12-02 19:54:45 +00:00
Scott Long
f4b5c2581d Refactor completion handlers so that they can be combined into a single
function.  Add missing locking.
2007-12-02 19:50:01 +00:00
Scott Long
4059f1cc7d Make a pass at style.9 compliance 2007-12-02 18:48:17 +00:00
Scott Long
4c92c3889c Fix a typo that was hidden by AMR_DEBUG. 2007-12-02 18:47:31 +00:00
Scott Long
3002614d91 Fix printf format bugs that where hidden by AMR_DEBUG. 2007-12-02 18:45:37 +00:00
Scott Long
0a5c91d058 Turn the CAM passthroug interface to AMR back ON. Adjust the
T_DIRECT filtering so that disk drives can be attached via the
pass driver.  Add CAM locking.  Don't mark CAM commands as SG64
since the hardware isn't designed to deal with 64-bit passthru
commands.  Hopefully the bounce buffer changes that were done
for the management/ioctl interface are robust enough to handle
this deficiency for CAM as well.
2007-11-28 19:40:17 +00:00
Scott Long
b50569b71d Prepare for future integration between CAM and newbus. xpt_bus_register
now takes a device_t to be the parent of the bus that is being created.
Most SIMs have been updated with a reasonable argument, but a few exceptions
just pass NULL for now.  This argument isn't used yet and the newbus
integration likely won't be ready until after 7.0-RELEASE.
2007-06-17 05:55:54 +00:00
Scott Long
2b83592fdc Remove Giant from CAM. Drivers (SIMs) now register a mutex that CAM will
use to synchornize and protect all data objects that are used for that
SIM.  Drivers that are not yet MPSAFE register Giant and operate as
usual.  RIght now, no drivers are MPSAFE, though a few will be changed
in the coming week as this work settles down.

The driver API has changed, so all CAM drivers will need to be recompiled.
The userland API has not changed, so tools like camcontrol do not need to
be recompiled.
2007-04-15 08:49:19 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00