Commit Graph

63 Commits

Author SHA1 Message Date
Kip Macy
1eeb6d97d0 Make KBI changes required for future MFCing of inpcb rtentry / llentry caching.
Reviewed by:	rwatson, bz
Approved by:	re (kib)
2011-09-20 20:27:26 +00:00
Hiroki Sato
049087a0f3 Add $ipv6_cpe_wanif to enable functionality required for IPv6 CPE
(r225485).  When setting an interface name to it, the following
configurations will be enabled:

 1. "no_radr" is set to all IPv6 interfaces automatically.

 2. "-no_radr accept_rtadv" will be set only for $ipv6_cpe_wanif.  This is
    done just before evaluating $ifconfig_IF_ipv6 in the rc.d scripts (this
    means you can manually supersede this configuration if necessary).

 3. The node will add RA-sending routers to the default router list
    even if net.inet6.ip6.forwarding=1.

This mode is added to conform to RFC 6204 (a router which connects
the end-user network to a service provider network).  To enable
packet forwarding, you still need to set ipv6_gateway_enable=YES.

Note that accepting router entries into the default router list when
packet forwarding capability and a routing daemon are enabled can
result in messing up the routing table.  To minimize such unexpected
behaviors, "no_radr" is set on all interfaces but $ipv6_cpe_wanif.

Approved by:	re (bz)
2011-09-13 00:06:11 +00:00
Bjoern A. Zeeb
90bc35de38 Add an in6_localip() helper function as in6_localaddr() is not doing what
people think: returning true for an address in any connected subnet, not
necessarily on the local machine.

Sponsored by:	Sandvine Incorporated
MFC after:	2 weeks
Approved by:	re (kib)
2011-08-20 16:43:47 +00:00
Hiroki Sato
e7fa8d0ada - Accept Router Advertisement messages even when net.inet6.ip6.forwarding=1.
- A new per-interface knob IFF_ND6_NO_RADR and sysctl IPV6CTL_NO_RADR.
  This controls if accepting a route in an RA message as the default route.
  The default value for each interface can be set by net.inet6.ip6.no_radr.
  The system wide default value is 0.

- A new sysctl: net.inet6.ip6.norbit_raif.  This controls if setting R-bit in
  NA on RA accepting interfaces.  The default is 0 (R-bit is set based on
  net.inet6.ip6.forwarding).

Background:

 IPv6 host/router model suggests a router sends an RA and a host accepts it for
 router discovery.  Because of that, KAME implementation does not allow
 accepting RAs when net.inet6.ip6.forwarding=1.  Accepting RAs on a router can
 make the routing table confused since it can change the default router
 unintentionally.

 However, in practice there are cases where we cannot distinguish a host from
 a router clearly.  For example, a customer edge router often works as a host
 against the ISP, and as a router against the LAN at the same time.  Another
 example is a complex network configurations like an L2TP tunnel for IPv6
 connection to Internet over an Ethernet link with another native IPv6 subnet.
 In this case, the physical interface for the native IPv6 subnet works as a
 host, and the pseudo-interface for L2TP works as the default IP forwarding
 route.

Problem:

 Disabling processing RA messages when net.inet6.ip6.forwarding=1 and
 accepting them when net.inet6.ip6.forward=0 cause the following practical
 issues:

 - A router cannot perform SLAAC.  It becomes a problem if a box has
   multiple interfaces and you want to use SLAAC on some of them, for
   example.  A customer edge router for IPv6 Internet access service
   using an IPv6-over-IPv6 tunnel sometimes needs SLAAC on the
   physical interface for administration purpose; updating firmware
   and so on (link-local addresses can be used there, but GUAs by
   SLAAC are often used for scalability).

 - When a host has multiple IPv6 interfaces and it receives multiple RAs on
   them, controlling the default route is difficult.  Router preferences
   defined in RFC 4191 works only when the routers on the links are
   under your control.

Details of Implementation Changes:

 Router Advertisement messages will be accepted even when
 net.inet6.ip6.forwarding=1.  More precisely, the conditions are as
 follow:

 (ACCEPT_RTADV && !NO_RADR && !ip6.forwarding)
	=> Normal RA processing on that interface. (as IPv6 host)

 (ACCEPT_RTADV && (NO_RADR || ip6.forwarding))
	=> Accept RA but add the router to the defroute list with
	   rtlifetime=0 unconditionally.  This effectively prevents
	   from setting the received router address as the box's
	   default route.

 (!ACCEPT_RTADV)
	=> No RA processing on that interface.

 ACCEPT_RTADV and NO_RADR are per-interface knob.  In short, all interface
 are classified as "RA-accepting" or not.  An RA-accepting interface always
 processes RA messages regardless of ip6.forwarding.  The difference caused by
 NO_RADR or ip6.forwarding is whether the RA source address is considered as
 the default router or not.

 R-bit in NA on the RA accepting interfaces is set based on
 net.inet6.ip6.forwarding.  While RFC 6204 W-1 rule (for CPE case) suggests
 a router should disable the R-bit completely even when the box has
 net.inet6.ip6.forwarding=1, I believe there is no technical reason with
 doing so.  This behavior can be set by a new sysctl net.inet6.ip6.norbit_raif
 (the default is 0).

Usage:

 # ifconfig fxp0 inet6 accept_rtadv
	=> accept RA on fxp0
 # ifconfig fxp0 inet6 accept_rtadv no_radr
	=> accept RA on fxp0 but ignore default route information in it.
 # sysctl net.inet6.ip6.norbit_no_radr=1
	=> R-bit in NAs on RA accepting interfaces will always be set to 0.
2011-06-06 02:14:23 +00:00
Bernd Walter
cae54c668c correct variable type name in comment 2011-04-25 09:00:52 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Pawel Jakub Dawidek
f44270e764 - Rename IP_NONLOCALOK IP socket option to IP_BINDANY, to be more consistent
with OpenBSD (and BSD/OS originally). We can't easly do it SOL_SOCKET option
  as there is no more space for more SOL_SOCKET options, but this option also
  fits better as an IP socket option, it seems.
- Implement this functionality also for IPv6 and RAW IP sockets.
- Always compile it in (don't use additional kernel options).
- Remove sysctl to turn this functionality on and off.
- Introduce new privilege - PRIV_NETINET_BINDANY, which allows to use this
  functionality (currently only unjail root can use it).

Discussed with:	julian, adrian, jhb, rwatson, kmacy
2009-06-01 10:30:00 +00:00
Bruce M Simpson
29dc7bc636 Merge final round of MLD changes from p4:
ip6_input.c, in6.h:
 * Add netinet6-specific mbuf flag M_RTALERT_MLD, shadowing M_PROTO6.
  * Always set this flag if HBH Router Alert option is present for MLD,
    even when not forwarding.

 icmp6.c:
 * In icmp6_input(), spell m->m_pkthdr.rcvif as ifp to be consistent.
 * Use scope ID for verifying input. Do not apply SSM filters here, no inpcb.
  * Check for M_RTALERT_MLD when validating MLD traffic, as we can't see
    IPv6 hop options outside of ip6_input().

 in6_mcast.c:
 * Use KAME scope/zone ID in in6_multi.
   * Update net.inet6.ip6.mcast.filters implementation to use scope IDs
     for comparisons.
 * Fix scope ID treatment in multicast socket option processing.
   Scope IDs passed in from userland will be ignored as other less
   ambiguous APIs exist for specifying the link.
 * Tighten userland input checks in IPv6 SSM delta and full-state ops.
   * Source filter embedded scope IDs need to be revisited, for now
     just clear them and ignore them on input.
 * Adapt KAME behaviour of looking up the scope ID in the default zone
   for multicast leaves, when the interface is ambiguous.

 mld6.c:
 * Tighten origin checks on MLD traffic as per RFC3810 Section 6.2:
  * ip6_src MAY be the unspecified address for MLDv1 reports.
  * ip6_src MAY have link-local address scope for MLDv1 reports,
    MLDv1 queries, and MLDv2 queries.
  * Perform address field validation *before* accepting queries.
 * Use KAME scope/zone ID in query/report processing.
   * Break const correctness for mld_v1_input_report(), mld_v1_input_query()
     as we temporarily modify the input mbuf chain.
   * Clear the scope ID before handoff to userland MLD daemon.
 * Fix MLDv1 old querier present timer processing.
   With the protocol defaults, hosts should revert to MLDv2 after 260s.
 * Add net.inet6.mld.v1enable sysctl, default to on.

 ifmcstat.c:
 * Use sysctl by default; -K requests kvm(3) if so compiled.

 mld.4:
 * Connect man page to build.

Tested using PCS.
2009-05-27 18:57:13 +00:00
Bruce M Simpson
ba970783a9 Add IN6ADDR_LINKLOCAL_ALLV2ROUTERS_INIT, in6addr_linklocal_allv2routers
for use by MLDv2.
Add IPv6 SSM socket layer membership vector size constants and
tree bounds.
Remove unreferenced struct ipv6_mreq_source; SSM for IPv6 goes
straight to the RFC 3678 socket options.
2009-04-29 10:22:44 +00:00
Kip Macy
de4ab55e43 add an llentry to struct route{_in6} to allow it to be passed around with
the rtentry
2009-04-15 20:34:19 +00:00
Colin Percival
29a6d781af Default to ignoring potentially evil IPv6 Neighbor Solicitation
messages.

Approved by:    so (cperciva)
Approved by:	re (kensmith)
Security:       FreeBSD-SA-08:10.nd6
Thanks to:      jinmei, bz
2008-10-02 00:32:59 +00:00
David E. O'Brien
b48287a32a Clean up VCS Ids. 2007-12-10 16:03:40 +00:00
Bjoern A. Zeeb
8accf26fea Restore behavior changed with rev. 1.46 and make
IPV6_IPSEC_POLICY always visible again. This unbreaks some
third party user space applications.

PR:		114491
Reported by:	sumikawa
Reviewed by:	sumikawa
Approved by:	re (hrs)
2007-07-19 09:16:40 +00:00
Xin LI
2a463222be Space cleanup
Approved by:	re (rwatson)
2007-07-05 16:29:40 +00:00
Xin LI
1272577e22 ANSIfy[1] plus some style cleanup nearby.
Discussed with:	gnn, rwatson
Submitted by:	Karl Sj?dahl - dunceor <dunceor gmail com> [1]
Approved by:	re (rwatson)
2007-07-05 16:23:49 +00:00
Max Laier
60ee384760 Link pf 4.1 to the build:
- move ftp-proxy from libexec to usr.sbin
 - add tftp-proxy
 - new altq mtag link

Approved by:	re (kensmith)
2007-07-03 12:46:08 +00:00
George V. Neville-Neil
b2630c2934 Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC
option is now deprecated, as well as the KAME IPsec code.
What was FAST_IPSEC is now IPSEC.

Approved by: re
Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
George V. Neville-Neil
2cb64cb272 Commit IPv6 support for FAST_IPSEC to the tree.
This commit includes only the kernel files, the rest of the files
will follow in a second commit.

Reviewed by:    bz
Approved by:    re
Supported by:   Secure Computing
2007-07-01 11:41:27 +00:00
Bruce M Simpson
71498f308b Import rewrite of IPv4 socket multicast layer to support source-specific
and protocol-independent host mode multicast. The code is written to
accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work.

This change only pertains to FreeBSD's use as a multicast end-station and
does not concern multicast routing; for an IGMPv3/MLDv2 router
implementation, consider the XORP project.

The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6,
which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html

Summary
 * IPv4 multicast socket processing is now moved out of ip_output.c
   into a new module, in_mcast.c.
 * The in_mcast.c module implements the IPv4 legacy any-source API in
   terms of the protocol-independent source-specific API.
 * Source filters are lazy allocated as the common case does not use them.
   They are part of per inpcb state and are covered by the inpcb lock.
 * struct ip_mreqn is now supported to allow applications to specify
   multicast joins by interface index in the legacy IPv4 any-source API.
 * In UDP, an incoming multicast datagram only requires that the source
   port matches the 4-tuple if the socket was already bound by source port.
   An unbound socket SHOULD be able to receive multicasts sent from an
   ephemeral source port.
 * The UDP socket multicast filter mode defaults to exclusive, that is,
   sources present in the per-socket list will be blocked from delivery.
 * The RFC 3678 userland functions have been added to libc: setsourcefilter,
   getsourcefilter, setipv4sourcefilter, getipv4sourcefilter.
 * Definitions for IGMPv3 are merged but not yet used.
 * struct sockaddr_storage is now referenced from <netinet/in.h>. It
   is therefore defined there if not already declared in the same way
   as for the C99 types.
 * The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF
   which are then interpreted as interface indexes) is now deprecated.
 * A patch for the Rhyolite.com routed in the FreeBSD base system
   is available in the -net archives. This only affects individuals
   running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces.
 * Make IPv6 detach path similar to IPv4's in code flow; functionally same.
 * Bump __FreeBSD_version to 700048; see UPDATING.

This work was financially supported by another FreeBSD committer.

Obtained from:  p4://bms_netdev
Submitted by:   Wilbert de Graaf (original work)
Reviewed by:    rwatson (locking), silence from fenner,
		net@ (but with encouragement)
2007-06-12 16:24:56 +00:00
David Malone
fe12457335 This comment on various IPPORT_ defines was copied from in.h and
probably never fully applied to IPv6. Over time it has become more
stale, so replace it with something more up to date.

Reviewed by:	ume
MFC after:	1 month
2006-03-28 12:51:22 +00:00
SUZUKI Shinsuke
e381ac4daa updates net.inet6.ip6.kame_version as the proof of the latest KAME merge
Reviewed by: KAME
MFC after: 2 days
2006-03-19 02:11:42 +00:00
SUZUKI Shinsuke
743eee666f sync with KAME regarding NDP
- introduced fine-grain-timer to manage ND-caches and IPv6 Multicast-Listeners
- supports Router-Preference <draft-ietf-ipv6-router-selection-07.txt>
- better prefix lifetime management
- more spec-comformant DAD advertisement
- updated RFC/internet-draft revisions

Obtained from: KAME
Reviewed by: ume, gnn
MFC after: 2 month
2005-10-21 16:23:01 +00:00
SUZUKI Shinsuke
c1a049ac20 sync with KAME (removed a unnecesary non-standard macro)
Obtained from: KAME
Reviewd by: ume, gnn
2005-10-19 16:53:24 +00:00
Hajimu UMEMOTO
5af09736a8 added a knob to enable path MTU discovery for multicast packets.
(by default, it is disabled)

Submitted by:	suz
Obtained from:	KAME
2005-08-13 19:55:06 +00:00
SUZUKI Shinsuke
f8a8f9ca5e supports stealth forwarding in IPv6, as well as in IPv4
PR: kern/54625
MFC after: 1 week
2005-08-10 09:13:35 +00:00
Hajimu UMEMOTO
a1f7e5f8ee scope cleanup. with this change
- most of the kernel code will not care about the actual encoding of
  scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
  scoped addresses as a special case.
- scope boundary check will be stricter.  For example, the current
  *BSD code allows a packet with src=::1 and dst=(some global IPv6
  address) to be sent outside of the node, if the application do:
    s = socket(AF_INET6);
    bind(s, "::1");
    sendto(s, some_global_IPv6_addr);
  This is clearly wrong, since ::1 is only meaningful within a single
  node, but the current implementation of the *BSD kernel cannot
  reject this attempt.

Submitted by:	JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from:	KAME
2005-07-25 12:31:43 +00:00
Hajimu UMEMOTO
18b35df8fe update comments:
- RFC2292bis -> RFC3542
  - typo fixes

Submitted by:	Keiichi SHIMA <keiichi__at__iijlab.net>
Obtained from:	KAME
2005-07-20 08:59:45 +00:00
Warner Losh
caf43b0208 /* -> /*- for license, minor formatting changes, separate for KAME 2005-01-07 02:30:35 +00:00
Warner Losh
f36cfd49ad Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson
2004-04-07 20:46:16 +00:00
Hajimu UMEMOTO
4e2a2c6a2d byebye in6_ifawithscope(). it was a function for old source
address selection.

Obtained from:	KAME
2003-11-05 17:19:31 +00:00
Hajimu UMEMOTO
d6385b1c0b source address selection part of RFC3484.
TODO: since there is scope issue to be solved, multicast and
link-local address are treated as special for workaround for
now.

Obtained from:	KAME
2003-11-04 20:22:33 +00:00
Hajimu UMEMOTO
7fc91b3f1d add management part of address selection policy described in
RFC3484.

Obtained from:	KAME
2003-10-30 15:29:17 +00:00
Hajimu UMEMOTO
0021a48500 use uint32_t instead of u_int32_t for newly introduced
struct definition.
2003-10-26 10:49:18 +00:00
Hajimu UMEMOTO
618d51bbdc revert following unwanted changes:
- __packed to __attribute__((__packed__)
  -  uintN_t back to u_intN_t

Reported by:	bde
2003-10-25 10:57:08 +00:00
Hajimu UMEMOTO
16cd67e933 correct namespace pollution.
Submitted by:	bde
2003-10-25 09:37:10 +00:00
Hajimu UMEMOTO
f95d46333d Switch Advanced Sockets API for IPv6 from RFC2292 to RFC3542
(aka RFC2292bis).  Though I believe this commit doesn't break
backward compatibility againt existing binaries, it breaks
backward compatibility of API.
Now, the applications which use Advanced Sockets API such as
telnet, ping6, mld6query and traceroute6 use RFC3542 API.

Obtained from:	KAME
2003-10-24 18:26:30 +00:00
Hajimu UMEMOTO
9888c40195 - implement lock around IPv6 reassembly, to avoid panic due to
frag6_drain (mutex version will come later).
- limit number of fragments (not fragment queues) in kernel.

Obtained from:	KAME
2003-10-22 15:29:42 +00:00
Hajimu UMEMOTO
9a4f9608ad - change scope to zone.
- change node-local to interface-local.
- better error handling of address-to-scope mapping.
- use in6_clearscope().

Obtained from:	KAME
2003-10-21 20:05:32 +00:00
Hajimu UMEMOTO
00165f8e92 nuke unused CTL_IPV6PROTO_NAMES macro. 2003-10-07 17:42:31 +00:00
Matthew N. Dodd
e97c58c8cf Add definitions for IN6ADDR_LINKLOCAL_ALLMDNS_INIT and INADDR_ALLMDNS_GROUP. 2003-04-29 22:03:46 +00:00
Mike Barcroft
abbd890233 o Merge <machine/ansi.h> and <machine/types.h> into a new header
called <machine/_types.h>.
o <machine/ansi.h> will continue to live so it can define MD clock
  macros, which are only MD because of gratuitous differences between
  architectures.
o Change all headers to make use of this.  This mainly involves
  changing:
    #ifdef _BSD_FOO_T_
    typedef	_BSD_FOO_T_	foo_t;
    #undef _BSD_FOO_T_
    #endif
  to:
    #ifndef _FOO_T_DECLARED
    typedef	__foo_t	foo_t;
    #define	_FOO_T_DECLARED
    #endif

Concept by:	bde
Reviewed by:	jake, obrien
2002-08-21 16:20:02 +00:00
Hajimu UMEMOTO
7b79862463 correct comment for setsockopt arg size.
Reported by:	Martin Laabs <martin@martin.erfurt.thur.de>
Obtained from:	KAME
MFC after:	1 week
2002-07-25 20:40:09 +00:00
Hajimu UMEMOTO
a5b71fafb7 sin6_len is not an address family. I believe this doesn't
break compatibility with POSIX.1-2001.
2002-07-22 15:13:55 +00:00
Mike Barcroft
9e2e036f90 o Conditionalize sections for POSIX.1-2001 compatibility.
o Use POSIX spelling for types, where possible.
o Define size_t in the __BSD_VISIBLE case (this isn't really needed
  for standards conformance, but follows the tradition of not
  requiring <sys/types.h> as a prerequisite).
o Use _BYTE_ORDER and friends instead of BYTE_ORDER and friends, since
  there may not be enough pollution in order for the latter to work.
o Add an XXX note about the missing IPPROTO_IPV6 macro.
2002-05-23 18:48:27 +00:00
SUZUKI Shinsuke
88ff5695c1 just merged cosmetic changes from KAME to ease sync between KAME and FreeBSD.
(based on freebsd4-snap-20020128)

Reviewed by:	ume
MFC after:	1 week
2002-04-19 04:46:24 +00:00
Mike Barcroft
13c3fcc238 Unconditionalize the definition of INET_ADDRSTRLEN and
INET6_ADDRSTRLEN.  Doing this helps expose bogus redefinitions in 3rd
party software.
2002-04-10 11:59:02 +00:00
Darren Reed
620fa9eb93 put an extern for ip6_protox in here where it is only used for kernel compiling 2002-03-19 15:01:21 +00:00
Mike Barcroft
6a6230d2f6 o Add INET_ADDRSTRLEN and INET6_ADDRSTRLEN defines to <arpa/inet.h>
for POSIX.1-2001 conformance.
o Add magic to <netinet/in.h> and <netinet6/in6.h> to prevent
  redefining INET_ADDRSTRLEN and INET6_ADDRSTRLEN.
o Add a note about missing typedefs in <arpa/inet.h>.
2002-03-10 06:42:27 +00:00
Brooks Davis
9494d5968f Make faith loadable, unloadable, and clonable. 2001-09-25 18:40:52 +00:00
Hajimu UMEMOTO
ead6be55b8 remove IN6_IS_ADDR_ANY macro (outside of standard, #if 0'ed for a long time)
Obtained from:	KAME
MFC after:	10 days
2001-06-24 20:43:01 +00:00