Instead, load them as part of the rc.d system. This allows us to prioritize
the initidiskless script so it runs before the configuration files are loaded
and allows us to get rid of the exit 2 hack in /etc/rc. The exit 2 never
worked anyway since it did not unset the prior configuration, causing the
diskless code to not operate properly.
Do a major cleanup and revamping of the diskless code for RCNG. This will
be backported to the non-RCNG scripts as well as -stable.
With suggestions from: Mike Makonnen <mtm@identd.net>
MFC after: 7 days
the whole thing generic. That is, /conf/base, /conf/default,
/conf/${ipba}, and /conf/${ip} are all handled the same way.
Introduce an NFS remounting feature via the /conf/base/<dir>/diskless_remount
so you can avoid dup'ing system directories in /conf (described in rc file).
Introduce a memory filesystem sizing feature via the /conf/base/<dir>/md_size
file that allows you to override the default memory filesystem size.
Introduce a file containing relative paths to remove for each memory filesystem
directory as /conf/base/<dirname>.remove.
Make the cpio feature more generic (applies to any filesystem) (aka
/conf/base/<dirname>.cpio.gz).
Allow any root directories to be created as a memory filesystem via the
/conf/*/* mechanism.
Replace the copyright notice with a reference to the COPYRIGHT file and
do other cleanups.
(documentation and man page updates to follow).
MFC after: 3 days
background fsck. The delay defaults to sixty seconds to allow
large applications such as the X server to start before disk I/O
bandwidth is monopolized by fsck.
Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
Sponsored by: DARPA & NAI Labs.
from "unix" back to "local". Add some compat stuff so both
ways work for some time.
Reviewed by: phk
Approved by: imp (UPDATING)
Requested by: iedowse, lukem@netbsd.org
that's being replaced here. This is what /etc/rc does now.
There is no NetBSD devfs, so there is no compatibility issue.
Not objected to by: FreeBSD-rc@yahoogroups.com
Approved by: re (murray)
where people want to have the cards configured. Lack of -z is a speed
optimization.
Submitted by: many voices on mobile@
Approved by: re@ (rwatson)
MFC after: 3 days
Fix a minor grammer nit.
Get rid of _echo that uses logger and just call logger in the 3 routines
that need it.
Add a comment referencing rc.conf(5) in the case of an incorrectly set
variable.
This pulls rc.subr up to 1.51 of rc.subr. I skipped 1.49 (systrace support)
since I don't have systrace.
Obtained from: NetBSD
to specify rules definition file for ipfilter. The default is
/etc/ipf6.rules. If there is a file which is specified by
'ipv6_ipfilter_rules', IPv6 rule is installed.
Reviewed by: Ronald van der Pol <Ronald.vanderPol@rvdp.org>
MFC after: 1 week
an entry in /etc/sysctl.conf didn't exist. Fixing this exposed a minor
typo "exits" vs. "exist".
However, there doesn't appear to be any provision to run this with
the "lastload" argument, meaning that the error will never appear.
whatever random value was already in $unit. It happened to work
because the variable is often unset, but this is not always the
case e.g. when you call "MAKEDEV sio2 usb ..."
This affects -stable as well.
Reviewed by: n_hibma
Silence from: re
MFC after: 3 days
# or any login.conf resource limits or features; use it only if this is
# appropriate for your environment. If you require these features, use
# the regular FreeBSD ftpd below.
Discourage users from using lukemftpd if they rely any of these standard
FreeBSD features that are fully supported by our native ftpd. There
may be other features that are not yet supported that I have not yet
discovered.
tells applications to print labels for all of the TrustedBSD-
generated policies, if they are present.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
the wheel group has no explicit members listed in /etc/group. This adds
the "exempt_if_empty" flag to pam_wheel in the default configuration;
in some environments, it may be appropriate to remove this flag, however,
this default is the same as pre-pam_wheel.
Reviewed by: markm
Sponsored by: DARPA, Network Associates Laboratories
configuration. Root privileges override DAC on local file systems and
therefore root does not generally need to be a member of a group to
access files owned by that group. In the NFS case, require explicit
authorization for root to have these privileges.
Leave root in operator for dump/restore broadcast reasons; leave root
in wheel until discrepencies in the "no users in wheel means any user
can su" policy are resolved (possibly indefinitely).
* Space -> tabs conversion.
* Removed blanks before semicolon in "if ... ; then".
* Proper indentation of misindented lines.
* Put a full stop after some comments.
* Removed whitespace at end of line.
Approved by: silence from gordon
script did. Stuff in rc.local frequently has lines like
"echo -n ' service_name'" which look ugly without a prefix and a
trailing period. Likewise for rc.shutdown.local for consistency.
and atime only, but also the ctime. Otherwise, files extracted from
tar or zip archives will immediately be declared stale since they've
got their mtime reset to the original mtime.
Reviewed by: brian
MFC after: 1 week
a per-machine or per-cluster (with different ways of expressing what's
part of a cluster) basis. In order for this to be effective, rc.conf
has to be reread after initdiskless is finished. Implement this by
adding a hook to etc/rc which rereads rc.conf by request. This can
also be implemented by renaming initdiskless to initdiskless.sh and
sourcing rc.conf there manually, but it was decided that, that would
be uglier than a hook in etc/rc.
Developed in concert with: gordon
PR: 38919
Submitted by: Tommy Johnson
o IBM IDE CDROM
PR: 39537
Submitted by: Kevin Van Maren
o T-Sunus 130 card
PR: 41802
Submitted by: Oliver Schneider
o No-name OEM Prism card
o ActionTec Prism card
o ZoomAir 11Mbps High Rate wireless networking
PR: 41929, 41928
Submitted by: Bruce M Simpson
o Dynalink L100C16
PR: 41938
Submitted by: Marco van de Voort
1) Add new card entry for nortel eMobility wi card (from email
that I've lost the sender on :-(
2) put ata devices at config 0x1 rather than auto. This should be
better for nearly all cases.
MFC after: 3 days
rcNG. The $amd_flags variable was already taken over into $rc_flags
by run_rc_command() when amd_precmd() is executed, so changing
$amd_flags there no longer effects the actual execution of amd.
Hence in amd_precmd() the $rc_flags have to be adjusted instead.
o Recognize AMD Elan SC520 hostbridge.
o Add initialization code for the AMD Elan sc520 which maps the MMCR
into KVM and sets the i8254 frequency to the correct value.
o MAKEDEV entry for elan-mmcr device
Reviewed by: phk, jhb
Approved by: re(jhb)
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
all instances of `${CMD_OSTYPE}` to just using ${OSTYPE}. This saves us a
shell invocation on anything that is OS-dependent. I seriously doubt that we
will be spontaneously changing OS types during bootup.
in the script. Eliminates a bug where we create a temp file, but don't
delete it since the rm(1) is only done if the check is enabled.
PR: bin/40960
Submitted by: frf <frf@xocolatl.com>
MFC after: 3 days
xntpd_* -> ntpd_*
portmap_* -> rpcbind_*
Also change single_mountd_enable -> mountd_enable
Changing the mountd flags brings us closer to NetBSD.
All of the old variable names are shimmed so you can continue to use the
old variable name.
Finally make /etc/rc.d/mountd no longer dependent on nfs as there are
(apparently) other consumers of mountd.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
xntpd_* -> ntpd_*
portmap_* -> rpcbind_*
Also change single_mountd_enable to mountd_enable.
We also include shims for all the old variable names.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
and others, because test(1) does not do shortcut evaluation.
Fix the same off-by-one error for acd*t* that revision 1.326 fixed
for other *cd devices.
Suggested by: bde
Reviewed by: bde
created cd1 as well due to an off-by-one error left over from
revision 1.249.
PR: conf/20436
Submitted by: Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
MFC after: 1 week
MP=`mount -t ufs | grep -v " nosuid" | awk '{ print $3 }' | sort`
sets ${MP} to an empty string so the next line:
set ${MP}
actually just dumps all of the shells variables to stdout (and therefore
the security report). Fixed by surrounding the code which goes through the
mounts with a test for an empty string before using ${MP}.
Reviewed by: brian
MFC after: 3 days
/etc filesystem isn't enough; consequently, add "-i 4096" to the newfs
command for /etc. This results in 1022 inodes, which should be enough
for the forseeable future (although I don't know why we would ever
have more than 1000 files in a default /etc).
Silence by: -current
Submitted by: matt peterson
While I'm here, kill the flags 0x10000 on all the prism based cards.
Both stable and current figure this out on their own and we've had at
least one releases where this is the case.
card behind it (without the pcmcia form factor). This entry gets to
the point of attaching, but there's something wrong with the '29
support, so it doesn't quite work yet.
while. This is only the script pieces, the glue for the build comes next.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
Reviewed by: silence on -current and -hackers
Prodded by: rwatson
Once upon a time (in rev. 1.81), COPYRIGHT and FREEBSD
were multi-value.
Moved installation of /var/log/cron to where it belongs
(this finishes the change in rev. 1.205).
Removed (with extreme prejudice) a bunch of parentheses
that unnecessarily obfuscated this makefile.
Run pwd_mkdb(8) right after master.passwd is installed.
Install nsmb.conf to /usr/share/examples/etc/.
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
which needs an empty directory into which to chroot(2).
Hint to the operator that this directory really _should_ be empty
by creating it with mode 0555 and the system immutable flag (schg)
set.
Reviewed by: des
while. This is only the script pieces, the glue for the build comes next.
Submitted by: Mike Makonnen <makonnen@pacbell.net>
Reviewed by: silence on -current and -hackers
Prodded by: rwatson
permissions to use for alias and map database files built by
/etc/mail/Makefile. The default is 0640 to assist users in avoiding
a file locking local denial of service.
MFC after: 1 day
pending RE approval
Apparently binding only to 127.0.0.1 inside of a jail actually binds
to the jail IP address as well (in effect, bind to all available
interfaces in the jail).
Submitted by: Helge Oldach <test-smtp@oldach.net>
MFC after: 1 day
pending RE approval
though I would personally prefer to see the broken nameservers fixed
instead of standards compliant applications work around them, I can't
force FreeBSD users to help fight that battle.
Submitted by: Damon Anton Permezel <dap@damon.com>
MFC after: 2 days
pending RE approval
fix a comment that suggested setting ipv6_ipv4mapping to blank. This
will aid in merging with rcng which requires all veriables to be
explicitly set.
Submitted by: Mike Makonnen
MFC after: 1 week
files in each ${local_startup} directory, it also reverses the order of the
directories.
Suggested by: jhb
Reviewed by: jake
Approved by: dougb
MFC after: 1 week
of wtmp.0 is done as mode 600.
This ensures that tight permissions set in /etc/newsyslog.conf for
wtmp logging aren't ``betrayed''.
Suggested by: lumpy <lumpy@the.whole.net>
MFC after: 3 days
The change was introduced in src/etc/security 1.53 almost a year ago
in an attempt to see ipfw deny message logs.
However, ipfw deny/reject logs have been displayed since version 1.13
of the same file as a separate ``job'' and have since moved to
src/etc/periodic/security/500.ipfwdenied.
MFC after: 3 days
rm -f /tmp/.X11-unix/*
If /tmp/.X11-unix didn't already exist, a user could symlink it to a directory
with files that he wants to wipe out, and wait for next reboot.
Reported by: lumpy <lumpy@the.whole.net>
The Blue Concentric CF 802.11b card is a compactflash form-factored card
that does 802.11b, including 128bit encryption.
The Zonet modem pccard is a simple FAX/Modem card.
Both are sold in Guang-Hua Market in Taipei, and functions perfectly
with -current and -stable.
Due to the way we run ls(1), through xargs(1), the leading whitespace
can change even when the setuid files haven't. To avoid displaying
these lines, we currently run diff(1) with the '-w' option. However,
this is probably not the ideal way to go; there is a very, very small
possibility for diff(1) to miss things is shouldn't. So, with the
leading space cleaned, we can revert to the '-b' option which is
"safer."
PR: conf/37618
Reviewed by: brian
MFC after: 3 days
pam_lastlog, so add a dummy session chain to avoid using the one from
pam.d/other. I assume gdm does something similar, so give it a dummy
session chain as well.
Sponsored by: DARPA, NAI Labs.
