Add poweroff command to make life a bit easier.
Reviewed by: imp, allanjude
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D17535
Lua has a few places where it allocates a large buffer on the stack. This
is normally fine, except there are a few places where there can be multiple
frames with this buffer. This can cause a stack overflow on some arm64 SoCs.
Fix this by allocating our own stack in loader.efi large enough for these
objects. The required size has been found by tracing how the stack pointer
changes in a virtual machine and found to be no larger than 50kB. A
larger stack is allocated to reduce the likelihood of overflow from future
changes.
Reviewed by: kevans
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D16886
manu found in the noted PR that overlays seemed to be clobbering the kenv
and killing the boot. Further inspection revealed that one can `fdt ls` at
the loader prompt for a successful boot, but autoboot breaks it.
In the autoboot case, first setup of FDT is happening in the middle of
bi_load, which triggers loading of the DTBO from /boot.
This is bad, bad, bad. Files in the loader are loaded somewhere in the
middle of the address space one after another. bi_load starts building the
needed kernel bootinfo immediately after the highest-addr loaded file. File
loads in the middle of bi_load suddenly clobber bootinfo and everything goes
off the rails.
The solution to this is to use take advantage of arch_autoload to setup FDT
in efiloader compiled with LOADER_FDT_SUPPORT. This matches how it works in
ubldr land, and is how it should have worked when overlay support was added
to efiloader since fdt_setup_fdtp now has the potential to load files
(courtesy of fdt_platform_load_dtb).
PR: 230804
Discussed with: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16858
Compiling FreeBSD/i386 with modern GCC triggers warnings for various
places that convert 64-bit EFI_ADDRs to pointers and vice versa.
- Cast pointers to uintptr_t rather than to uint64_t when assigning
to a 64-bit integer.
- Cast 64-bit integers to uintptr_t before a cast to a pointer.
Reviewed by: kevans
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16586
Create loader_{4th,lua,simp}{,.efi}. All of these are installed by
default. Create LOADER_DEFAULT_INTERP to specify the default
interpreter when no other is specified. LOADER_INTERP is the current
interpreter language building. Turn building of lua on by default to
match 4th. simploader is a simplified loader build w/o any interpreter
language (but with a simple loader). This is the historic behavir you
got with WITHOUT_FORTH. Make a hard link to the default loader. This
has to be a hard link rather than the more desirable soft link because
older zfsboot blocks don't support symlinks.
RelNotes: Yes
Differential Revision: https://reviews.freebsd.org/D16705
efi-autoresizecons is currently executed for every boot. If it fails, we
risk failing the boot, and we really shouldn't do that unless we absolutely
must.
Not being able to locate GOP or UGA is not a significant enough failure to
kill the boot. We always have the option to fall back to resizing ConOut to
a higher text mode resolution (if available), so do that.
This was detected by Doug [1] while attempting a bhyve + UEFI + PXE boot.
This patch was effectively also submitted by Doug, but I expanded the
comment he had originally sent me a little bit to indicate why this is an OK
idea.
Reported by: Doug Ambrisko <ambrisko@ambrisko.com> [1]
If there are no block devices, there is no need to printout
error (ENOENT).
In case of netboot, our image path has no block device, no need to make
noise about it.
Note when we've found a 8250 PNP node. Only try to set hw.uart.console
if we see one (otherwise ignore serial hints). The 8250 is the only
one known to have I/O ports, so limit the guessing to when we've
positively seen one. And limit this to x86 since that's the only
platform where we have I/O ports. Otherwise, we'd set the serial port
to something crazy for the platform and fall off the cliff early in
boot.
Differential Revision: https://reviews.freebsd.org/D16463
Add some verbose debugging information to the loader's new
choices. I'll remove these / put them behind a DEBUG define at a later
time. This is to give additional information if there's any dangling
edge cases not contemplated by the code. r336789 had most of this
change, but had the wrong commit message. This refines it slightly.
nodes. These show up in default entries on SuperMicro motherboards and
elsewhere. Before, we couldn't find a block device associated with the
device path and return BAD_CHOICE which was an instant
failure. However, a VendHw node isn't specifc, so when we don't find a
media path, return NOT_SPECIFIC so that the rest of the algorithms
work.
Sponsored by: Netflix.
loading.
If we are booting in a conforming UEFI Boot Manager Environment, then
use the BootCurrent variable to find the BootXXXX we're using. Once we
find that, then if it contains more than one EFI_DEVICE_PATH in its
what to boot section, try to use the last one as the kernel to
load. This will also set the default root partition as well. If
there's only one path, or if there's an error along the way, assume
that nothing specific was specified and revert to the old
algorithm. If something was specified, but not found, then fail the
boot. Otherwise you that, specific thing. On FreeBSD, this can be set
using efibootmgr -l <loader> -k <kernel>. We try a few variations of
kernel to cope with the fact that UEFI comes from a DOS world where
paths might be upper case and/or contain back-slashes.
Note: In an ideal world, we'd work out where we are in chain loading
by looking at the passed-in image handle and doing name
matching. However, that's unreliable since at least boot1.efi booted
images don't have that, hence the assumption that loader.efi needs to
load the last thing on the list, if possible.
The reason we fail for something specific is so that we can fully
participate in the UEFI Boot Manager Protocol and fail over to the
next item in the list of BootOrder choices when something goes wrong
at this stage.
This implements was was talked about in freebsd-arch@ last year
https://docs.freebsd.org/cgi/getmsg.cgi?fetch=3576+0+archive/2017/freebsd-arch/20171022.freebsd-arch
and documented in full (after changed resulting from the discussion) in
https://docs.google.com/document/d/1aK9IqF-60JPEbUeSAUAkYjF2W_8EnmczFs6RqCT90Jg/edit#
although one or two minor details may have been modified in this
implementation to make it work, and the ZFS MEDIA PATH extension isn't
implemented. This does not yet move things to ESP:\efi\freebsd\loader.efi.
RelNotes: Yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16403
Lookup a block device by it's device path. We use a 'loose' lookup
whereby we scan forward to the first Media Path portion of the device
path, then look at all our handles for one whose first Media Path
matches. This will also work if the device path pointed to has a
following file path (or paths) as that's ignored. It assumes that
there's only one media path node that describes the entire device,
which is true as of the latest UEFI spec (2.7 Errata A) as far as I've
been able to determine.
Sponsored by: Netflix
Returns true if the first node pointed to by devpath1 is identical to
the first node pointed to by devpath2, with care taken to not read
past the end of the valid parts of either devpath1 or
devpath2. Otherwise, returns false.
Sponsored by: Netflix
Takes a generic device path as its input. Scans through it to find the
first media_path node in it and returns a pointer to it. If none is
found, NULL is returned.
Sponsored by: Netflix
line args. I had thought console would be NULL, but it's efi. Set it
to efi (as a clue) before we initialize the console, then test it to
see if it changed on the command line to do the automatic
override. This gets my serial console back.
Setting rootdev in the enviornment should specify things
completely. If it is set, then have it override everything else.
PR: 229770
Differential Review: https://reviews.freebsd.org/D16322
up serial output. Setting the cursor position after every character is
inefficient, and causes all lines to be over-printed in the serial
console for the boot loader. Allow the terminal to do the emulation.
This isn't completely perfect when the size of the terminal attached
to the serial port isn't the same as 80x25 to match the viedoe console
(or whatever the video console is). While imperfect still, these
changes make it much better.
This makes the serial port useful with UEFI.
Differential Revision: https://reviews.freebsd.org/D16309
o Fix the parsing of the device path. a last minute change terminated
it too soon.
o Kill setting LINES. We don't need to do it, and even if we did hard
coding it to 24 is wrong.
o Now that the console is working again for the loader, adjust the
printfs to be more in line with other platforms.
note that r336270's commit message was slightly incorrect. It changed
the default setting of the console to honor the ConOut
variable. Overrides via the command line are still possible, and we
use the devices in ConOut to set the proper console. If, for example,
serial cosnole is specified, we'll set console to "efi" if ConOut has
a serial port list and to either "efi comconsole" or "comconsole efi"
if not depending on whether -D or -D -h was specified.
RelNotes: Yes
Sponsored by: Netflix
For server machines, ComOut is set to the set of devices that the efi
console suppots. Parse it to see if we have serial, video or both.
Make that take precidence over the command line args. boot1.efi parses
them, but loader.efi doesn't. It's not clear where to read boot.conf
from, so we don't do that. The command line args can still be set via
efibootmgr, which is more inline with the UEFI boot manager to replace
that. These args are typically used only to set serial vs video and
the com speed line. We can infer that from ComOut, so do so.
Remember the com speed and hw.uart.console to match.
RelNotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15917
This moves the bulk of the geli support from lib386/biosdisk.c into a new
geli/gelidev.c which implements a devsw-type device whose dv_strategy()
function handles geli decryption. Support for all arches comes from moving
the taste-and-attach code to the devopen() function in libsa.
After opening any DEVT_DISK device, devopen() calls the new function
geli_probe_and_attach(), which will "attach" the geli code to the open_file
struct by creating a geli_devdesc instance to replace the disk_devdesc
instance in the open_file. That routes all IO for the device through the
geli code.
A new public geli_add_key() function is added, to allow arch/vendor-specific
code to add keys obtained from custom hardware or other sources.
With these changes, geli support will be compiled into all variations of
loader(8) on all arches because the default is WITH_LOADER_GELI.
Relnotes: yes
Sponsored by: Microchip Technology Inc
Differential Revision: https://reviews.freebsd.org/D15743
Eliminate 4 of the copies of the arg parsing in /boot/laoder
by using boot_parse_cmdline.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
Move the libzfs stuff into libsa. There's no need for it to be a
separate library. The separate library adds to the issues of build
ordering that we see from time to time. Move the filesystem support
into libsa, like all the other filesystem support rather than making
zfs the odd-duck out.
Discussed with: allanjude@
While in base we use it as a boolean (of the wrong spelling), there's
at least one out of tree user that needs it to be int since priorirty
is a small int, not a 0/1. In deference to the time it's wasted me and
my team, push this up into FreeBSD for whatever short life boot1 may
have in the tree.
table if we're just going to ignore it on arm, so expand, slightly,
the reach of the ifdef. Move the buffer to the inner block so we
don't have a separate #ifdef far away from these lines.
The issue on arm is that smbios_detect does unaligned accesses, which
in the u-boot implementing EFI context causes a crash.
is. We tell the ZFS code now, and it checks rather than having a
callback to do the checks.
This will allow us to have a more graceful fallback code. In the
future, it's anticipated that we may fallback to a more global search
(or implement a command to do so) when reqeusted by the user, or we
detect a violation of the UEFI Boot Manager protocol severe enough to
warrant this backstop. For now, it just allows us to get rid of img as
a global.
Sponsored by: Netflix
e.g. boot_mute, boot_single, boot_verbose, and friends; we checked for these
in multiple places, consolidate into common/ and allow a setting of "NO" for
any of these to turn them off. This allows systems with multiple
loader.conf(5) or loader.conf(5) overlay systems to easily turn off
variables in later processed files by setting it to NO.
Reported by: Nick Wolff @ iXsystems
Reviewed by: imp
If the check for a UFS partition at offset 0 on the disk fails, check
to see if there's a BSD disklabel at block 1 (standard) or at offset
512 (install images assume 512 sector size). If found, probe for UFS
on the 'a' partition.
This fixes UEFI booting images from a BSD labeled MBR slice when the
'a' partiton isn't at offset 0. This is a stop-gap fix since we plan
on removing boot1.efi in FreeBSD 12. We can't easily do that for 11.2,
however, hence the short MFC window.
Tested by: emaste@
MFC After: 3 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15598
- We should be setting a known graphics mode on conout, but we aren't.
- We shouldn't be setting gop mode if we didn't find a good resolution to
set, but we were. This made efi_max_resolution=1x1 effectively worthless,
since it would always set gop mode 0 if nothing else.