33cb3cb2e3 introduced an `rib_head` structure field under the
FIB_ALGO define. This may be problematic for the CTF, as some
of the files including `route_var.h` do not have `fib_algo`
defined.
Make dtrace happy by making the field unconditional.
Suggested by: markj
Add 'syncok' field to ifconfig's pfsync interface output. This allows
userspace to figure out when pfsync has completed the initial bulk
import.
Reviewed by: donner
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29948
Allow up to 5 labels to be set on each rule.
This offers more flexibility in using labels. For example, it replaces
the customer 'schedule' keyword used by pfSense to terminate states
according to a schedule.
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29936
iflib now supports mapping each (TX,RX) queue pair to the same CPU
(default), to separate CPUs, or to a pair of physical and logical CPUs
that share the same L2 cache. The mapping mechanism supports unequal
numbers of TX and RX queues, with the excess queues always being
mapped to consecutive physical CPUs. When the platform cannot
distinguish between physical and logical CPUs, all are treated as
physical CPUs. See the comment on get_cpuid_for_queue() for the
entire matrix.
The following device-specific tunables influence the mapping process:
dev.<device>.<unit>.iflib.core_offset (existing)
dev.<device>.<unit>.iflib.separate_txrx (existing)
dev.<device>.<unit>.iflib.use_logical_cores (new)
The following new, read-only sysctls provide visibility of the mapping
results:
dev.<device>.<unit>.iflib.{t,r}xq<n>.cpu
When an iflib driver allocates TX softirqs without providing reference
RX IRQs, iflib now binds those TX softirqs to CPUs using the above
mapping mechanism (that is, treats them as if they were TX IRQs).
Previously, such bindings were left up to the grouptaskqueue code and
thus fell outside of the iflib CPU mapping strategy.
Reviewed by: kbowling
Tested by: olivier, pkelsey
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D24094
Traditionally we had 2 sources of information whether the
added/delete route request targets network or a host route:
netmask (RTA_NETMASK) and RTF_HOST flag.
The former one is tricky: netmask can be empty or can explicitly
specify the host netmask. Parsing netmask sockaddr requires per-family
parsing and that's what rtsock code traditionally avoided. As a result,
consistency was not enforced and it was possible to specify network with
the RTF_HOST flag and vice versa.
Continue normalization efforts from D29826 and D29826 and ensure that
RTF_HOST flag always reflects host/network data from netmask field.
Differential Revision: https://reviews.freebsd.org/D29958
MFC after: 2 days
This reverts a portion of 274579831b ("capsicum: Limit socket
operations in capability mode") as at least rtsol and dhcpcd rely on
being able to configure network interfaces while in capability mode.
Reported by: bapt, Greg V
Sponsored by: The FreeBSD Foundation
Changes to the LRO code have exposed a bug in iflib where devices
which are not capable of doing LRO are still calling
tcp_lro_flush_all(), even when they have not initialized the LRO
context. This used to be mostly harmless, but the LRO code now sets
the VNET based on the ifp in the lro context and will try to access it
through a NULL ifp resulting in a panic at boot.
To fix this, we unconditionally initializes LRO so that we have a
valid LRO context when calling tcp_lro_flush_all(). One alternative is
to check the device capabilities before calling tcp_lro_flush_all() or
adding a new state flag in the ctx. However, it seems unwise to add an
extra, mostly useless test for higher performance devices when we can
just initialize LRO for all devices.
Reviewed by: erj, hselasky, markj, olivier
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29928
Currently, PCB caching mechanism relies on the rib generation
counter (rnh_gen) to invalidate cached nhops/LLE entries.
With certain fib algorithms, it is now possible that the
datapath lookup state applies RIB changes with some delay.
In that scenario, PCB cache will invalidate on the RIB change,
but the new lookup may result in the same nexthop being returned.
When fib algo finally gets in sync with the RIB changes, PCB cache
will not receive any notification and will end up caching the stale data.
To fix this, introduce additional counter, rnh_gen_rib, which is used
only when FIB_ALGO is enabled.
This counter is incremented by the control plane. Each time when fib algo
synchronises with the RIB, it updates rnh_gen to the current rnh_gen_rib value.
Differential Revision: https://reviews.freebsd.org/D29812
Reviewed by: donner
MFC after: 2 weeks
Address multiple issues with strict rtsock message validation.
D28668 "normalisation" approach was based on the assumption that
we always have at least "standard" sockaddr len.
It turned out to be false - certain older applications like quagga
or routed abuse sin[6]_len field and set it to the offset to the
first fully-zero bit in the mask. It is impossible to normalise
such sockaddrs without reallocation.
With that in mind, change the approach to use a distinct memory
buffer for the altered sockaddrs. This allows supporting the older
software while maintaining the guarantee on the "standard" sockaddrs.
PR: 255273,255089
Differential Revision: https://reviews.freebsd.org/D29826
MFC after: 3 days
Usually rule counters are reset to zero on every update of the ruleset.
With keepcounters set pf will attempt to find matching rules between old
and new rulesets and preserve the rule counters.
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29780
Split the PFRULE_REFS flag from the rule_flag field. PFRULE_REFS is a
kernel-internal flag and should not be exposed to or read from
userspace.
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29778
IEEE Std 802.1D-2004 Section 17.14 defines permitted ranges for timers.
Incoming BPDU messages should be checked against the permitted ranges.
The rest of 17.14 appears to be enforced already.
PR: 254924
Reviewed by: kp, donner
Differential Revision: https://reviews.freebsd.org/D29782
Fib algo uses a per-family array indexed by the fibnum to store
lookup function pointers and per-fib data.
Each algorithm rebuild currently requires re-allocating this array
to support atomic change of two pointers.
As in reality most of the changes actually involve changing only
data pointer, add a shortcut performing in-flight pointer update.
MFC after: 2 weeks
Some algorithms may require updating datapath and control plane
algo pointers after the (batched) updates.
Export fib_set_datapath_ptr() to allow setting the new datapath
function or data pointer from the algo.
Add fib_set_algo_ptr() to allow updating algo control plane
pointer from the algo.
Add fib_epoch_call() epoch(9) wrapper to simplify freeing old
datapath state.
Reviewed by: zec
Differential Revision: https://reviews.freebsd.org/D29799
MFC after: 1 week
Initial fib algo implementation was build on a very simple set of
principles w.r.t updates:
1) algorithm is ether able to apply the change synchronously (DIR24-8)
or requires full rebuild (bsearch, lradix).
2) framework falls back to rebuild on every error (memory allocation,
nhg limit, other internal algo errors, etc).
This changes brings the new "intermediate" concept - batched updates.
Algotirhm can indicate that the particular update has to be handled in
batched fashion (FLM_BATCH).
The framework will write this update and other updates to the temporary
buffer instead of pushing them to the algo callback.
Depending on the update rate, the framework will batch 50..1024 ms of updates
and submit them to a different algo callback.
This functionality is handy for the slow-to-rebuild algorithms like DXR.
Differential Revision: https://reviews.freebsd.org/D29588
Reviewed by: zec
MFC after: 2 weeks
MAP-E (RFC 7597) requires special care for selecting source ports
in NAT operation on the Customer Edge because a part of bits of the port
numbers are used by the Border Relay to distinguish another side of the
IPv4-over-IPv6 tunnel.
PR: 254577
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D29468
Slighly relax the gateway validation rules imposed by the
2fe5a79425, by requiring only first 8 bytes (everyhing
before sdl_data to be present in the AF_LINK gateway.
Reported by: olivier
This will make future extensions of the API much easier.
The intent is to remove support for DIOCADDRULE in FreeBSD 14.
Reviewed by: markj (previous version), glebius (previous version)
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29557
The intent is to better handle time intervals with large amount of RIB
updates (e.g. BGP peer going up or down), while still keeping low sync
delay for the rest scenarios.
The implementation is the following: updates are bucketed into the
buckets of size 50ms. If the number of updates within a current bucket
exceeds the threshold of 500 routes/sec (e.g. 10 updates per bucket
interval), the update is delayed for another 50ms. This can be repeated
until the maximum update delay (1 sec) is reached.
All 3 variables are runtime tunables:
* net.route.algo.fib_max_sync_delay_ms: 1000
* net.route.algo.bucket_change_threshold_rate: 500
* net.route.algo.bucket_time_ms: 50
Differential Review: https://reviews.freebsd.org/D29588
MFC after: 2 weeks
Capsicum did not prevent certain privileged networking operations,
specifically creation of raw sockets and network configuration ioctls.
However, these facilities can be used to circumvent some of the
restrictions that capability mode is supposed to enforce.
Add capability mode checks to disallow network configuration ioctls and
creation of sockets other than PF_LOCAL and SOCK_DGRAM/STREAM/SEQPACKET
internet sockets.
Reviewed by: oshogbo
Discussed with: emaste
Reported by: manu
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29423
Otherwise it breaks when offloading like checksum or TSO are used,
because second (encapsulated) ip_output() processing passes fragments of
the encapsulated packet down to the hardware interface.
Diagnosed by: hselasky
Reviewed by: np
Sponsored by: Nvidia Networking / Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29501
In some settings offload might calculate hash from decapsulated packet.
Reserve a bit in packet header rsstype to indicate that.
Add m_adj_decap() that acts similarly to m_adj, but also either clear
flowid if it is not marked as inner, or transfer it to the decapsulated
header, clearing inner indicator. It depends on the internals of m_adj()
that reuses the argument packet header for the result.
Use m_adj_decap() for decapsulating vxlan(4) and gif(4) input packets.
Reviewed by: ae, hselasky, np
Sponsored by: Nvidia Networking / Mellanox Technologies
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28773
The current code has the limit of 127 nexthop groups due to the
wrongly-checked bitmask_copy() return value.
PR: 254303
Reported by: Aleks <a.ivanov at veesp.com>
MFC after: 1 day
The netmap monitor intercepts any TX/RX packets on the monitored
port. However, before this change there was no way to tell
whether an intercepted packet was being transmitted or received
on the monitored port.
A TXMON flag in the netmap slot has been added for this purpose.
This feature enables applications to ask netmap to transmit or
receive packets starting at a user-specified offset from the
beginning of the netmap buffer. This is meant to ease those
packet manipulation operations such as pushing or popping packet
headers, that may be useful to implement software switches,
routers and other packet processors.
To use the feature, drivers (e.g., iflib, vtnet, etc.) must have
explicit support. This change does not add support for any driver,
but introduces the necessary kernel changes. However, offsets support
is already included for VALE ports and pipes.
This per-driver callback is invoked by netmap when it wants
to align the number of TX/RX netmap rings and/or the number of
TX/RX netmap slots to the actual state configured in the hardware.
The alignment happens when netmap mode is switched on (with no
active netmap file descriptors for that netmap port), or when
collecting netmap port information.
MFC after: 1 week
`struct weightened_nhop` has spare 32bit between the fields due to
the alignment (on amd64).
Not zeroing these spare bits results in duplicating nhop groups
in the kernel due to the way how comparison works.
MFC after: 1 day
In case with batch route delete via rib_walk_del(), when
some paths from the multipath route gets deleted, old
multipath group were not freed.
PR: 254496
Reported by: Zhenlei Huang <zlei.huang@gmail.com>
MFC after: 1 day
* device_printf() is effectively a printf
* if_printf() is effectively a LOG_INFO
This allows subsystems to log device/netif stuff using different log levels,
rather than having to invent their own way to prefix unit/netif names.
Differential Revision: https://reviews.freebsd.org/D29320
Reviewed by: imp
After length decisions, we've decided that the if_wg(4) driver and
related work is not yet ready to live in the tree. This driver has
larger security implications than many, and thus will be held to
more scrutiny than other drivers.
Please also see the related message sent to the freebsd-hackers@
and freebsd-arch@ lists by Kyle Evans <kevans@FreeBSD.org> on
2021/03/16, with the subject line "Removing WireGuard Support From Base"
for additional context.
This is the culmination of about a week of work from three developers to
fix a number of functional and security issues. This patch consists of
work done by the following folks:
- Jason A. Donenfeld <Jason@zx2c4.com>
- Matt Dunwoodie <ncon@noconroy.net>
- Kyle Evans <kevans@FreeBSD.org>
Notable changes include:
- Packets are now correctly staged for processing once the handshake has
completed, resulting in less packet loss in the interim.
- Various race conditions have been resolved, particularly w.r.t. socket
and packet lifetime (panics)
- Various tests have been added to assure correct functionality and
tooling conformance
- Many security issues have been addressed
- if_wg now maintains jail-friendly semantics: sockets are created in
the interface's home vnet so that it can act as the sole network
connection for a jail
- if_wg no longer fails to remove peer allowed-ips of 0.0.0.0/0
- if_wg now exports via ioctl a format that is future proof and
complete. It is additionally supported by the upstream
wireguard-tools (which we plan to merge in to base soon)
- if_wg now conforms to the WireGuard protocol and is more closely
aligned with security auditing guidelines
Note that the driver has been rebased away from using iflib. iflib
poses a number of challenges for a cloned device trying to operate in a
vnet that are non-trivial to solve and adds complexity to the
implementation for little gain.
The crypto implementation that was previously added to the tree was a
super complex integration of what previously appeared in an old out of
tree Linux module, which has been reduced to crypto.c containing simple
boring reference implementations. This is part of a near-to-mid term
goal to work with FreeBSD kernel crypto folks and take advantage of or
improve accelerated crypto already offered elsewhere.
There's additional test suite effort underway out-of-tree taking
advantage of the aforementioned jail-friendly semantics to test a number
of real-world topologies, based on netns.sh.
Also note that this is still a work in progress; work going further will
be much smaller in nature.
MFC after: 1 month (maybe)
swi_remove() removes the software interrupt handler but does not remove
the associated interrupt event.
This is visible when creating and remove a vnet jail in `procstat -t
12`.
We can remove it manually with intr_event_destroy().
PR: 254171
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29211
Receive Segment Coalescing (RSC) in the vSwitch is a feature available in
Windows Server 2019 hosts and later. It reduces the per packet processing
overhead by coalescing multiple TCP segments when possible. This happens
mostly when TCP traffics are among different guests on same host.
This patch adds netvsc driver support for this feature.
The patch also updates NVS version to 6.1 as needed for RSC
enablement.
MFC after: 2 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D29075
Summary:
This fixes rtentry leak for the cloned interfaces created inside the
VNET.
PR: 253998
Reported by: rashey at superbox.pl
MFC after: 3 days
Loopback teardown order is `SI_SUB_INIT_IF`, which happens after `SI_SUB_PROTO_DOMAIN` (route table teardown).
Thus, any route table operations are too late to schedule.
As the intent of the vnet teardown procedures to minimise the amount of effort by doing global cleanups instead of per-interface ones, address this by adding a relatively light-weight routing table cleanup function, `rib_flush_routes()`.
It removes all remaining routes from the routing table and schedules the deletion, which will happen later, when `rtables_destroy()` waits for the current epoch to finish.
Test Plan:
```
set_skip:set_skip_group_lo -> passed [0.053s]
tail -n 200 /var/log/messages | grep rtentry
```
Reviewers: #network, kp, bz
Reviewed By: kp
Subscribers: imp, ae
Differential Revision: https://reviews.freebsd.org/D29116
If we hit an error during init, then we'll unwind our state and attempt
to detach the device -- don't block it.
This was discovered by creating a wg0 with missing parameters; said
failure ended up leaving this orphaned device in place and ended up
panicking the system upon enumeration of the dev.* sysctl space.
Reviewed by: gallatin, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29145
This structure is shared among multiple instances of a driver, so we
should ensure that it doesn't somehow get treated as if there's a
separate instance per interface. This is especially important for
software-only drivers like wg.
DEVICE_REGISTER() still returns a void * and so the per-driver sctx
structures are not yet defined with the const qualifier.
Reviewed by: gallatin, erj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29102
Drain the callbacks upon if_deregister_com_alloc() such that the
if_com_free[type] won't be nullified before if_destroy().
Taking fwip(4) as an example, before this fix, kldunload if_fwip will
go through the following:
1. fwip_detach()
2. if_free() -> schedule if_destroy() through NET_EPOCH_CALL
3. fwip_detach() returns
4. firewire_modevent(MOD_UNLOAD) -> if_deregister_com_alloc()
5. kernel complains about:
Warning: memory type fw_com leaked memory on destroy (1 allocations, 64 bytes leaked).
6. EPOCH runs if_destroy() -> if_free_internal()i
By this time, if_com_free[if_alloctype] is NULL since it's already
nullified by if_deregister_com_alloc(); hence, firewire_free() won't
have a chance to release the allocated fw_com.
Reviewed by: hselasky, glebius
MFC after: 2 weeks
This structure is only used by the kernel module internally. It's not
shared with user space, so hide it behind #ifdef _KERNEL.
Sponsored by: Rubicon Communications, LLC ("Netgate")
In some configurations we need more classes than ALTQ supports by
default. Increase the maximum number of classes we allow.
This will only cost us a comparatively trivial amount of memory, so
there's little reason not to do so.
If ever we find we want even more we may want to consider turning these
defines into a tunable, but for now do the easy thing.
Reviewed by: donner@
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29034
Introduce convenience macros to retrieve the DSCP, ECN or traffic class
bits from an IPv6 header.
Use them where appropriate.
Reviewed by: ae (previous version), rscheff, tuexen, rgrimes
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29056
For interfaces with admin completion queues, introduce a new devmethod
IFDI_ADMIN_COMPLETION_HANDLE and a corresponding flag IFLIB_HAS_ADMINCQ.
This provides an option for handling any admin cq logic, which cannot be
run from an interrupt context.
Said method is called from within iflib's admin task, making it safe to
sleep.
Reviewed by: mmacy
Submitted by: Artur Rojek <ar@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D28708
Commit 6dd69f0064 ("iflib: introduce isc_dma_width")
failed to build on powerpc due to implicit type conversion
error. Fix that.
Submitted by: Artur Rojek <ar@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Some DMA controllers are unable to address the full host memory space
and are instead limited to a subset of address range (e.g. 48-bit).
Allow the driver to specify the maximum allowed DMA addressing width
(in bits) for the NIC hardware, by introducing a new field in
if_softc_ctx.
If said field is omitted (set to 0), the lowaddr of DMA window bounds
defaults to BUS_SPACE_MAXADDR.
Submitted by: Artur Rojek <ar@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D28706
iflib_rxeof() was counting everything twice. This was introduced when
pfil hooks were added to the iflib receive path. We want to count rx
packets/bytes before the pfil hooks are executed, so remove the counter
adjustments that are executed after.
PR: 253583
Reviewed by: gallatin, erj
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28900
When the bridge is moved to a different vnet we must remove all of its
member interfaces (and span interfaces), because we don't know if those
will be moved along with it. We don't want to hold references to
interfaces not in our vnet.
Reviewed by: donner@
MFC after: 1 week
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D28859
VLAN devices have type IFT_L2VLAN, so the STP code mistakenly believed
they couldn't be used for STP. That's not the case, so add the
ITF_L2VLAN to the check.
Reviewed by: donner@
MFC after: 1 week
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D28857
The routing stack control depends on quite a tree of functions to
determine the proper attributes of a route such as a source address (ifa)
or transmit ifp of a route.
When actually inserting a route, the stack needs to ensure that ifa and ifp
points to the entities that are still valid.
Validity means slightly more than just pointer validity - stack need guarantee
that the provided objects are not scheduled for deletion.
Currently, callers either ignore it (most ifp parts, historically) or try to
use refcounting (ifa parts). Even in case of ifa refcounting it's not always
implemented in fully-safe manner. For example, some codepaths inside
rt_getifa_fib() are referencing ifa while not holding any locks, resulting in
possibility of referencing scheduled-for-deletion ifa.
Instead of trying to fix all of the callers by enforcing proper refcounting,
switch to a different model.
As the rib_action() already requires epoch, do not require any stability guarantees
other than the epoch-provided one.
Use newly-added conditional versions of the refcounting functions
(ifa_try_ref(), if_try_ref()) and fail if any of these fails.
Reviewed by: donner
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28837
When we have an ifp pointer and the code is running inside epoch,
epoch guarantees the pointer will not be freed.
However, the following case can still happen:
* in thread 1 we drop to refcount=0 for ifp and schedule its deletion.
* in thread 2 we use this ifp and reference it
* destroy callout kicks in
* unhappy user reports a bug
This can happen with the current implementation of ifnet_byindex_ref(),
as we're not holding any locks preventing ifnet deletion by a parallel thread.
To address it, add if_try_ref(), allowing to return failure when
referencing ifp with refcount=0.
Additionally, enforce existing if_ref() is with KASSERT to provide a
cleaner error in such scenarios.
Finally, fix ifnet_byindex_ref() by using if_try_ref() and returning NULL
if the latter fails.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28836
rtsock message validation changes committed in 2fe5a79425
did not take llinfo messages into account.
Add a special validation case for RTA_GATEWAY llinfo messages.
MFC after: 2 days
In commit 38bfc6dee3 we added an IFDI_DETACH() call to
iflib_pseudo_deregister() since it looked like it was missing. One is
present in the error-handling path of iflib_pseudo_register(). However,
the detach actually comes from the DEVICE_DETACH() method for the
above-mentioned device_t, so now we're calling IFDI_DETACH() twice when
destroying a pseudo interface.
Fix the problem by not calling IFDI_DETACH() from the device detach
routine. This way we can ensure that iflib de-initialization always
happens in a consistent order. It also ensures that you can't do silly
things like "devctl detach <pseudo ifnet>", which would previously
detach the driver without tearing down the corresponding ifnet.
PR: 253541
Reviewed by: erj
MFC after: 1 week
Fixes: 38bfc6dee3
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28774
Changes in the 2fe5a79425 moved dst sockaddr masking from the
routing control plane to the rtsock code.
It broke arp/ndp deletion.
It turns out, arp/ndp perform RTM_GET request first to get an
interface index necessary for the deletion.
Then they simply stamp the reply with RTF_LLDATA and set the
command to RTM_DELETE.
As a result, kernel receives request with non-empty RTA_NETMASK
and clears RTA_DST host bits before passing the message to the
lla code.
De facto, the only needed bits are RTA_DST, RTA_GATEWAY and the
subset of rtm_flags.
With that in mind, fix the interace by clearing RTA_NETMASK
for every messages with RTF_LLDATA.
While here, cleanup arp/ndp code a bit.
MFC after: 1 day
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D28804
This fixes a warning from GCC for kernels without netmap since the
return value is never used.
Reviewed by: vmaffione, erj
Differential Revision: https://reviews.freebsd.org/D28598
Traditionally routing socket code did almost zero checks on
the input message except for the most basic size checks.
This resulted in the unclear KPI boundary for the routing system code
(`rtrequest*` and now `rib_action()`) w.r.t message validness.
Multiple potential problems and nuances exists:
* Host bits in RTAX_DST sockaddr. Existing applications do send prefixes
with hostbits uncleared. Even `route(8)` does this, as they hope the kernel
would do the job of fixing it. Code inside `rib_action()` needs to handle
it on its own (see `rt_maskedcopy()` ugly hack).
* There are multiple way of adding the host route: it can be DST without
netmask or DST with /32(/128) netmask. Also, RTF_HOST has to be set correspondingly.
Currently, these 2 options create 2 DIFFERENT routes in the kernel.
* no sockaddr length/content checking for the "secondary" fields exists: nothing
stops rtsock application to send sockaddr_in with length of 25 (instead of 16).
Kernel will accept it, install to RIB as is and propagate to all rtsock consumers,
potentially triggering bugs in their code. Same goes for sin_port, sin_zero, etc.
The goal of this change is to make rtsock verify all sockaddr and prefix consistency.
Said differently, `rib_action()` or internals should NOT require to change any of the
sockaddrs supplied by `rt_addrinfo` structure due to incorrectness.
To be more specific, this change implements the following:
* sockaddr cleanup/validation check is added immediately after getting sockaddrs from rtm.
* Per-family dst/netmask checks clears host bits in dst and zeros all dst/netmask "secondary" fields.
* The same netmask checking code converts /32(/128) netmasks to "host" route case
(NULL netmask, RTF_HOST), removing the dualism.
* Instead of allowing ANY "known" sockaddr families (0<..<AF_MAX), allow only actually
supported ones (inet, inet6, link).
* Automatically convert `sockaddr_sdl` (AF_LINK) gateways to
`sockaddr_sdl_short`.
Reported by: Guy Yur <guyyur at gmail.com>
Reviewed By: donner
Differential Revision: https://reviews.freebsd.org/D28668
MFC after: 3 days
More and more code migrates from lock-based protection to the NET_EPOCH
umbrella. It requires some logic changes, including, notably, refcount
handling.
When we have an `ifa` pointer and we're running inside epoch we're
guaranteed that this pointer will not be freed.
However, the following case can still happen:
* in thread 1 we drop to 0 refcount for ifa and schedule its deletion.
* in thread 2 we use this ifa and reference it
* destroy callout kicks in
* unhappy user reports bug
To address it, new `ifa_try_ref()` function is added, allowing to return
failure when we try to reference `ifa` with 0 refcount.
Additionally, existing `ifa_ref()` is enforced with `KASSERT` to provide
cleaner error in such scenarious.
Reviewed By: rstone, donner
Differential Revision: https://reviews.freebsd.org/D28639
MFC after: 1 week
iflib_init_locked() assumes that iflib_stop() has been called, however,
it is not called for media changes.
iflib_if_init_locked() calls stop then init, so fixes the problem.
PR: 253473
MFC after: 3 days
Reviewed by: markj
Sponsored by: Juniper Networks, Inc., Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D28667
The case of adding interface route by specifying interface
address as the gateway was missed during code refactoring.
Re-add it back by copying non-AF_LINK gateway data when RTF_GATEWAY
is not set.
Reviewed by: donner
MFC after: 3 days
Traditionally *BSD routing stack required to supply some
interface data for blackhole/reject routes. This lead to
varieties of hacks in routing daemons when inserting such routes.
With the recent routeing stack changes, gateway sockaddr without
RTF_GATEWAY started to be treated differently, purely as link
identifier.
This change broke net/bird, which installs blackhole routes with
127.0.0.1 gateway without RTF_GATEWAY flags.
Fix this by automatically constructing necessary gateway data at
rtsock level if RTF_REJECT/RTF_BLACKHOLE is set.
Reported by: Marek Zarychta <zarychtam at plan-b.pwste.edu.pl>
Reviewed by: donner
MFC after: 1 week
Widen the ifnet_detach_sxlock to cover the entire vnet sysuninit code.
This ensures that we can't end up having the vnet_sysuninit free the UDP
pcb while the detach code is running and trying to purge the UDP pcb.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28530
Historically receive buffer overflows have been ignored and programs
could not tell if they missed messages or messages had been truncated
because of overflows. Since programs historically do not expect to get
receive overflow errors, this behavior is not the default.
This is really really important for programs that use route(4) to keep in sync
with the system. If we loose a message then we need to reload the full system
state, otherwise the behaviour from that point is undefined and can lead
to chasing bogus bug reports.
ROUTE_MPATH was added to the GENERIC kernel in r368648.
According to the plan in D27428, it was enabled with `net.route.multipath` sysctl set to 0.
Given enough time has passed, this change enables route multipath by default.
The goal is to ship FreeBSD 13 with multipath turned on.
Reviewed By: donner, olivier
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28423
Memory and PCI resources are freed with no particular order. This could
cause use-after-frees when detaching following a failed attach. For
instance, iflib_tx_structures_free() frees ctx->ifc_txqs[] but
iflib_tqg_detach() attempts to access this array. Similarly, adapter
queues gets freed by IFDI_QUEUES_FREE() but IFDI_DETACH() attempts to
access adapter queues to free PCI resources.
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D27634
Currently, if the immutable algorithm like bsearch or radix_lockless
receives rtable update notification, it schedules algorithm rebuild.
This rebuild is executed by the callout after ~50 milliseconds.
It is possible that a script adding an interface address and than route
with the gateway bound to that address will fail. It can happen due
to the fact that fib is not updated by the time the route addition
request arrives.
Fix this by allowing synchronous algorithm rebuilds based on certain
conditions. By default, these conditions assume:
1) less than net.route.algo.fib_sync_limit=100 routes
2) routes without gateway.
* Move algo instance build entirely under rib WLOCK.
Rib lock is only used for control plane (except radix algo, but there
are no rebuilds).
* Add rib_walk_ext_locked() function to allow RIB iteration with
rib lock already held.
* Fix rare potential callout use-after-free for fds by binding fd
callout to the relevant rib rmlock. In that case, callout_stop()
under rib WLOCK guarantees no callout will be executed afterwards.
MFC after: 3 days
subscriptions during RIB modifications.
Add new subscriptions to the beginning of the lists instead of
the end. This fixes the situation when new subscription is created
int the callback for the existing subscription, leading to the
subscription notification handler pick it.
MFC after: 3 days
* Move per-prefix debug lines under LOG_DEBUG2
* Create fib instance counter to distingush log messages between
instances
* Add more messages on rebuild reason.
MFC after: 3 days
The initial plan was to remove rib_lookup_info() before
FreeBSD 13. As several customers are still remaining,
fix rib_lookup_info() for the multipath use case.
D26436 introduced support for stacked vlans that changed the way vlans
are configured. In particular, this change broke setups that have
same-number vlans as subinterfaces.
Vlan support was initially created assuming "vlanX" semantics. In this paradigm,
automatic number assignment supported by cloning (ifconfig vlan create) was a
natural fit.
When "ifaceX.Y" support was added, allowing to have the same vlan number on
multiple devices, cloning code became more complex, as the is no
unified "vlan" namespace anymore. Such interfaces got the first spare
index from "vlan" cloner. This, in turn, led to the following problem:
ifconfig ix0.333 create -> index 1
ifconfig ix0.444 create -> index 2
ifconfig vlan2 create -> allocation failure
This change fixes such allocations by using cloning indexes only for
"vlanX" interfaces.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D27505
Originally IFCAP_NOMAP meant that the mbuf has external storage pointer
that points to unmapped address. Then, this was extended to array of
such pointers. Then, such mbufs were augmented with header/trailer.
Basically, extended mbufs are extended, and set of features is subject
to change. The new name should be generic enough to avoid further
renaming.
tree that fix the ratelimit code. There were several bugs
in tcp_ratelimit itself and we needed further work to support
the multiple tag format coming for the joint TLS and Ratelimit dances.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D28357
This will allow userspace to more easily figure out if ALTQ is built
into the kernel and what disciplines are supported.
Reviewed by: donner@
Differential Revision: https://reviews.freebsd.org/D28302
The NS_MOREFRAG flag can be set in a netmap slot to represent a
multi-fragment packet. Only the last fragment of a packet does
not have the flag set. On TX rings, the flag may be set by the
userspace application. The kernel will look at the flag and use it
to properly set up the NIC TX descriptors.
On RX rings, the kernel may set the flag if the packet received
was split across multiple netmap buffers. The userspace application
should look at the flag to know when the packet is complete.
Submitted by: rajesh1.kumar_amd.com
Reviewed by: vmaffione
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27799
rxd_frag_to_sd() have pf_rv parameter as NULL with the current
code. This patch fixes the NULL pointer dereference in that
case thus avoiding a possible panic.
Submitted by: rajesh1.kumar at amd.com
Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D28115
it gets unused.
Currently if_purgeifaddrs() uses in6_purgeaddr() to remove IPv6
ifaddrs. in6_purgeaddr() does not trrigger prefix removal if
number of linked ifas goes to 0, as this is a low-level function.
As a result, if_purgeifaddrs() purges all IPv4/IPv6 addresses but
keeps corresponding IPv6 prefixes.
Fix this by creating higher-level wrapper which handles unused
prefix usecase and use it in if_purgeifaddrs().
Differential revision: https://reviews.freebsd.org/D28128
rtinit[1]() is a function used to add or remove interface address prefix routes,
similar to ifa_maintain_loopback_route().
It was intended to be family-agnostic. There is a problem with this approach
in reality.
1) IPv6 code does not use it for the ifa routes. There is a separate layer,
nd6_prelist_(), providing interface for maintaining interface routes. Its part,
responsible for the actual route table interaction, mimics rtenty() code.
2) rtinit tries to combine multiple actions in the same function: constructing
proper route attributes and handling iterations over multiple fibs, for the
non-zero net.add_addr_allfibs use case. It notably increases the code complexity.
3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag
for p2p connections, host routes and p2p routes are handled in the same way.
Additionally, mapping IFA flags to RTF flags makes the interface pretty messy.
It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface
aliases.
4) rtinit() is the last customer passing non-masked prefixes to rib_action(),
complicating rib_action() implementation.
5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive"
ifa messages in certain corner cases.
To address all these points, the following has been done:
* rtinit() has been split into multiple functions:
- Route attribute construction were moved to the per-address-family functions,
dealing with (2), (3) and (4).
- funnction providing net.add_addr_allfibs handling and route rtsock notificaions
is the new routing table inteface.
- rtsock ifa notificaion has been moved out as well. resulting set of funcion are only
responsible for the actual route notifications.
Side effects:
* /32 alias does not result in interface routes (/32 route and "host" route)
* RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses
Differential revision: https://reviews.freebsd.org/D28186
Removed code iterates over if_addrhead and tries to remove
routes for each ifa.
This is exactly the thing that if_purgeaddrs() do, and
if_purgeaddr() is already called in the end.
Reviewed by: glebius
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D28106
In e86bddea9f sys/netpfil/pf/pf.h grew a
declaration of pf_get_ruleset_number. Now delete the old declaration
from sys/net/pfvar.h.
Reviewed by: kp
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D28081
Restore the hwofs functionality temporarily disabled by
7ba6ecf216 to prevent issues with iflib.
This patch brings the necessary changes to iflib to
enable howfs to allow interface restarts without
disrupting netmap applications actively using its
rings.
After this change, it becomes possible for multiple
non-cooperating netmap applications to use non-overlapping
subsets of the available netmap rings without clashing
with each other.
PR: 252453
MFC after: 1 week
The iflib_queues_alloc() allocates isc_nrxqs iflib_dma_info structs
for each rxqset, and links each struct to a different free list.
As a result, it must be isc_nrxqs >= isc_nfl (plus the completion
queue, if present).
Add an assertion to make this constraint explicit.
MFC after: 2 weeks
Since 1d238b07d5, krings are disabled before
a reinit cycle triggered by iflib_netmap_register.
However, this operation is actually necessary also for
any interface reinit triggered by other causes (i.e.,
ifconfig commands).
We achieve this goal by moving the krings enable/disable
operation inside iflib_stop() and iflib_init_locked().
Once here, this change also removes some redundant operations
from iflib_netmap_register(), that are already performed by
iflib_stop().
PR: 252453
MFC after: 1 week
When netmap_fl_refill() is called at initialization time (e.g.,
during netmap_iflib_register()), nic_i must be 0, since the
free list is reinitialized. At the end of the refill cycle, nic_i
must still be zero, because exactly N descriptors (N is the ring size)
are refilled.
This patch therefore fixes the assertions to check on nic_i rather
than on nm_i. The current netmap_reset() may in fact cause nm_i
to be != 0 while the device is resetting: this may happen when
multiple non-cooperating processes open different subsets of the
available netmap rings.
PR: 252518
MFC after: 1 week
When different processes open separate subsets of the
available rings of a same netmap interface, a device
reset may be performed while one of the processes
is actively using some rings (e.g., caused by another
process executing a nmport_open()).
With this patch, such situation will cause the
active process to get a POLLERR, so that it can
have a chance to detect the situation.
We also guarantee that no process is running a txsync
or rxsync (ioctl or poll) while an iflib device reset
is in progress.
PR: 252453
MFC after: 1 week
Doing a 'dd' over iscsi will reliably cause stalls. Tx
cleaning _should_ reliably happen as data is sent.
However, currently if the transmit queue fills it will
wait until the iflib timer (hz/2) runs.
This change causes the the tx taskq thread to be run
if there are completed descriptors.
While here:
- make timer interrupt delay a sysctl
- simplify txd_db_check handling
- comment on INTR types
Background on the change:
Initially doorbell updates were minimized by only writing to the register
on every fourth packet. If txq_drain would return without writing to the
doorbell it scheduled a callout on the next tick to do the doorbell write
to ensure that the write otherwise happened "soon". At that time a sysctl
was added for users to avoid the potential added latency by simply writing
to the doorbell register on every packet. This worked perfectly well for
e1000 and ixgbe ... and appeared to work well on ixl. However, as it
turned out there was a race to this approach that would lockup the ixl MAC.
It was possible for a lower producer index to be written after a higher one.
On e1000 and ixgbe this was harmless - on ixl it was fatal. My initial
response was to add a lock around doorbell writes - fixing the problem but
adding an unacceptable amount of lock contention.
The next iteration was to use transmit interrupts to drive delayed doorbell
writes. If there were no packets in the queue all doorbell writes would be
immediate as the queue started to fill up we could delay doorbell writes
further and further. At the start of drain if we've cleaned any packets we
know we've moved the state machine along and we write the doorbell (an
obvious missing optimization was to skip that doorbell write if db_pending
is zero). This change required that tx interrupts be scheduled periodically
as opposed to just when the hardware txq was full. However, that just leads
to our next problem.
Initially dedicated msix vectors were used for both tx and rx. However, it
was often possible to use up all available vectors before we set up all the
queues we wanted. By having rx and tx share a vector for a given queue we
could halve the number of vectors used by a given configuration. The problem
here is that with this change only e1000 passed the necessary value to have
the fast interrupt drive tx when appropriate.
Reported by: mav@
Tested by: mav@
Reviewed by: gallatin@
MFC after: 1 month
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D27683
Improve caching behaviour by using counter_u64 rather than variables
shared between cores.
The result of converting all counters to counter(9) (i.e. this full
patch series) is a significant improvement in throughput. As tested by
olivier@, on Intel Xeon E5-2697Av4 (16Cores, 32 threads) hardware with
Mellanox ConnectX-4 MCX416A-CCAT (100GBase-SR4) nics we see:
x FreeBSD 20201223: inet packets-per-second
+ FreeBSD 20201223 with pf patches: inet packets-per-second
+--------------------------------------------------------------------------+
| + |
| xx + |
|xxx +++|
||A| |
| |A||
+--------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 5 9216962 9526356 9343902 9371057.6 116720.36
+ 5 19427190 19698400 19502922 19546509 109084.92
Difference at 95.0% confidence
1.01755e+07 +/- 164756
108.584% +/- 2.9359%
(Student's t, pooled s = 112967)
Reviewed by: philip
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27763
Factor out allocating and freeing pfi_kkif structures. This will be
useful when we change the counters to be counter_u64, so we don't have
to deal with that complexity in the multiple locations where we allocate
pfi_kkif structures.
No functional change.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27762
This improves the cache behaviour of pf and results in improved
throughput.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27760
The u_* counters are used only to communicate with userspace, as
userspace cannot use counter_u64. As pf_krule is not passed to userspace
these fields are now obsolete.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27759
As part of the split between user and kernel mode structures we're
moving all user space usable definitions into pf.h.
No functional change intended.
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27757
Introduce a kernel version of struct pf_src_node (pf_ksrc_node).
This will allow us to improve the in-kernel data structure without
breaking userspace compatibility.
Reviewed by: philip
MFC after: 2 weeks
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27707
Specifically implement the if_requestencap callback function for infiniband.
Most of the changes are simply a cut and paste of the equivalent ethernet part.
Reviewed by: melifaro @
Differential Revision: https://reviews.freebsd.org/D27631
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Need to update both link layer address and broadcast address when active link changes for IP over infiniband.
This is because the broadcast address contains the so-called P-key, which is interface dependent.
Reviewed by: kib @
Differential Revision: https://reviews.freebsd.org/D27658
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Use recently-added combination of `fib[46]_lookup_rt()` which
returns rtentry & raw nexthop with `rt_get_inet[6]_plen()` which
returns address/prefix length of prefix inside `rt`.
Add `nhop_select_func()` wrapper around inlined `nhop_select()` to
allow callers external to the routing subsystem select the proper
nexthop from the multipath group without including internal headers.
New calls does not require reference counting objects and reduce
the amount of copied/processed rtentry data.
Differential Revision: https://reviews.freebsd.org/D27675
This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.
Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.
Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.
The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps
IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps
Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)
Control:
Framwork adds the following runtime sysctls:
List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless
Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.
Differential Revision: https://reviews.freebsd.org/D27401
When copying sockaddrs out to userspace, we pad them to a multiple of
the platform alignment (sizeof(long)). However, some sockaddr sizes,
such as struct sockaddr_dl, are not an integer multiple of the
alignment, so we may end up copying out uninitialized bytes.
Fix this by always bouncing through a pre-zeroed sockaddr_storage.
Reported by: KASAN
Reviewed by: melifaro
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27729
This improves cache behaviour by not writing to the same variable from
multiple cores simultaneously.
pf_state is only used in the kernel, so can be safely modified.
Reviewed by: Lutz Donnerhacke, philip
MFC after: 1 week
Sponsed by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D27661
The algorithm we use to update checksums only works correctly if the
updated data is aligned on 16-bit boundaries (relative to the start of
the packet).
Import the OpenBSD fix for this issue.
PR: 240416
Obtained from: OpenBSD
MFC after: 1 week
Reviewed by: tuexen (previous version)
Differential Revision: https://reviews.freebsd.org/D27696
And switch from int to bool while at it.
Reviewed by: melifaro@
Differential Revision: https://reviews.freebsd.org/D27725
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
The packet, if processed at this point, was already parsed to be UDP
directed to a vxlan port.
Connect-X 4+ does not provide easy method to infer which parser
processed the packet, so driver cannot set the flag without a lot of
efforts which are only to satisfy the formal requirements.
Reviewed by: bryanv, np
Sponsored by: Mellanox Technologies/NVidia Networking
Differential revision: https://reviews.freebsd.org/D27449
MFC after: 1 week
rtsock code was build around the assumption that each rtentry record
in the system radix tree is a ready-to-use sockaddr. This assumptions
turned out to be not quite true:
* masks have their length tweaked, so we have rtsock_fix_netmask() hack
* IPv6 addresses have their scope embedded, so we have another explicit
deembedding hack.
Change the code to decouple rtentry internals from rtsock code using
newly-created rtentry accessors. This will allow to eventually eliminate
both of the hacks and change rtentry dst/mask format.
Differential Revision: https://reviews.freebsd.org/D27451
struct ifconf and struct ifreq use the odd style "struct<tab>foo".
struct ifdrv seems to have tried to follow this but was committed with
spaces in place of most tabs resulting in "struct<space><space>ifdrv".
MFC after: 3 days
In some error paths we would fail to detach from the iflib taskqueue
groups. Also move the detach code into its own subroutine instead of
duplicating it.
Submitted by: Sai Rajesh Tallamraju <stallamr@netapp.com>
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D27342
Multiple consumers like ipfw, netflow or new route lookup algorithms
need to get the prefix data out of struct rtentry.
Instead of providing direct access to the rtentry, create IPv4/IPv6
accessors to abstract struct rtentry internals and avoid including
internal routing headers for external consumers.
While here, move struct route_nhop_data to the public header, so external
customers can actually use lookup functions returning rt&nhop data.
Differential Revision: https://reviews.freebsd.org/D27416
Revert the mitigation code for the vnet/epair cleanup race (done in r365457).
r368237 introduced a more reliable fix.
MFC after: 2 weeks
Sponsored by: Modirum MDPay
When destroying a vnet and an epair (with one end in the vnet) we often
panicked. This was the result of the destruction of the epair, which destroys
both ends simultaneously, happening while vnet_if_return() was moving the
struct ifnet to its home vnet. This can result in a freed ifnet being re-added
to the home vnet V_ifnet list. That in turn panics the next time the ifnet is
used.
Prevent this race by ensuring that vnet_if_return() cannot run at the same time
as if_detach() or epair_clone_destroy().
PR: 238870, 234985, 244703, 250870
MFC after: 2 weeks
Sponsored by: Modirum MDPay
Differential Revision: https://reviews.freebsd.org/D27378
ROUTE_MPATH is the new config option controlling new multipath routing
implementation. Remove the last pieces of RADIX_MPATH-related code and
the config option.
Reviewed by: glebius
Differential Revision: https://reviews.freebsd.org/D27244
It allows code within routing subsystem to transparently reference nexthops
and nexthop groups, similar to nhop_free_any(), abstracting ROUTE_MPATH
details.
Differential Revision: https://reviews.freebsd.org/D27410
No functional changes.
* Make lookup path of fib<4|6>_lookup_debugnet() separate functions
(fib<46>_lookup_rt()). These will be used in the control plane code
requiring unlocked radix operations and actual prefix pointer.
* Make lookup part of fib<4|6>_check_urpf() separate functions.
This change simplifies the switch to alternative lookup implementations,
which helps algorithmic lookups introduction.
* While here, use static initializers for IPv4/IPv6 keys
Differential Revision: https://reviews.freebsd.org/D27405
The resulting KPI can be used by routing table consumers to estimate the required
scale for route table export.
* Add tracking for rib routes
* Add accessors for number of nexthops/nexthop objects
* Simplify rib_unsubscribe: store rnh we're attached to instead of requiring it up
again on destruction. This helps in the cases when rnh is not linked yet/already unlinked.
Differential Revision: https://reviews.freebsd.org/D27404
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
When we terminate a vnet (i.e. jail) we move interfaces back to their home
vnet. We need to protect our access to the V_ifnet CK_LIST.
We could enter NET_EPOCH, but if_detach_internal() (called from if_vmove())
waits for net epoch callback completion. That's not possible from NET_EPOCH.
Instead, we take the IFNET_WLOCK, build a list of the interfaces that need to
move and, once we've released the lock, move them back to their home vnet.
We cannot hold the IFNET_WLOCK() during if_vmove(), because that results in a
LOR between ifnet_sx, in_multi_sx and iflib ctx lock.
Separate out moving the ifp into or out of V_ifnet, so we can hold the lock as
we do the list manipulation, but do not hold it as we if_vmove().
Reviewed by: melifaro
MFC after: 2 weeks
Sponsored by: Modirum MDPay
Differential Revision: https://reviews.freebsd.org/D27279
It no longer serves any purpose, as evidenced by the fact that we never take it
without ifnet_sxlock.
Sponsored by: Modirum MDPay
Differential Revision: https://reviews.freebsd.org/D27278
* Make rib_walk() order of arguments consistent with the rest of RIB api
* Add rib_walk_ext() allowing to exec callback before/after iteration.
* Rename rt_foreach_fib_walk_del -> rib_foreach_table_walk_del
* Rename rt_forach_fib_walk -> rib_foreach_table_walk
* Move rib_foreach_table_walk{_del} to route/route_helpers.c
* Slightly refactor rib_foreach_table_walk{_del} to make the implementation
consistent and prepare for upcoming iterator optimizations.
Differential Revision: https://reviews.freebsd.org/D27219
Don't use "new" as an identifier, and add explicit casts from void *.
As a general policy, FreeBSD doesn't make any C++ compatibility
guarantees for kernel headers like it does for userland, but it is a
small effort to do so in this case, to the benefit of a downstream
consumer (NetApp).
Reviewed by: rscheff
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27286
When links come and go, lacp goes into a "suppress distributing" mode
where it drops traffic for 3 seconds. When in this mode, lagg/lacp
historiclally drops traffic with ENETDOWN. That return value causes TCP
to close any connection where it gets that value back from the lower
parts of the stack. This means that any TCP connection with active
traffic during a 3-second windown when an LACP link comes or goes
would get closed.
TCP treats return values of ENOBUFS as transient errors, and re-schedules
transmission later. So rather than returning ENETDOWN, lets
return ENOBUFS instead. This allows TCP connections to be preserved.
I've tested this by repeatedly bouncing links on a Netlfix CDN server
under a moderate (20Gb/s) load and overved ENOBUFS reported back to
the TCP stack (as reported by a RACK TCP sysctl).
Reviewed by: jhb, jtl, rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27188
lagg(4) replaces if_output method of its child interfaces and expects
that this method can be called only by child interfaces. But it is
possible that lagg_port_output() could be called by children of child
interfaces. In this case ifnet's if_lagg field is NULL. Add check that
lp is not NULL.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
Add the missing static keyword present in the declaration.
Reviewed by: melifaro
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27024
The goal of the fib support is to provide multiple independent
routing tables, isolated from each other.
net.add_addr_allfibs default tries to shift gears in the opposite
direction, unconditionally inserting all addresses to all of the fibs.
There are use cases when this is necessary, however this is not a
default expected behaviour, especially compared to other implementations.
Provide WARNING message for the setups with multiple fibs to notify
potential users of the feature.
Differential Revision: https://reviews.freebsd.org/D26076
Stop advancing counter past the current iteration number at the start
of iteration. This removes the need of subtracting one when
calculating index for copyout, and arguably fixes off-by-one reporting
of copied out elements when copyout failed.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies / NVidia Networking
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27073
Use consistent output format for hex.
Print both media and mask where relevant.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27034
This can be used to detect if an ethernet address is specifically an
IPv6 multicast address, defined in accordance to RFC 2464.
ETHER_IS_MULTICAST is still preferred in the general case.
Reviewed by: ae
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26611
This gives a more uniform API for send tag life cycle management.
Reviewed by: gallatin, hselasky
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D27000
- Add a new send tag type for a send tag that supports both rate
limiting (packet pacing) and TLS offload (mostly similar to D22669
but adds a separate structure when allocating the new tag type).
- When allocating a send tag for TLS offload, check to see if the
connection already has a pacing rate. If so, allocate a tag that
supports both rate limiting and TLS offload rather than a plain TLS
offload tag.
- When setting an initial rate on an existing ifnet KTLS connection,
set the rate in the TCP control block inp and then reset the TLS
send tag (via ktls_output_eagain) to reallocate a TLS + ratelimit
send tag. This allocates the TLS send tag asynchronously from a
task queue, so the TLS rate limit tag alloc is always sleepable.
- When modifying a rate on a connection using KTLS, look for a TLS
send tag. If the send tag is only a plain TLS send tag, assume we
failed to allocate a TLS ratelimit tag (either during the
TCP_TXTLS_ENABLE socket option, or during the send tag reset
triggered by ktls_output_eagain) and ignore the new rate. If the
send tag is a ratelimit TLS send tag, change the rate on the TLS tag
and leave the inp tag alone.
- Lock the inp lock when setting sb_tls_info for a socket send buffer
so that the routines in tcp_ratelimit can safely dereference the
pointer without needing to grab the socket buffer lock.
- Add an IFCAP_TXTLS_RTLMT capability flag and associated
administrative controls in ifconfig(8). TLS rate limit tags are
only allocated if this capability is enabled. Note that TLS offload
(whether unlimited or rate limited) always requires IFCAP_TXTLS[46].
Reviewed by: gallatin, hselasky
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26691
Code was supposed to call callout_reset_sbt_on() rather than
callout_reset_sbt(). This resulted into passing a "cpu" value
to a "flag" argument. A recipe for subtle errors.
PR: 248652
Reported by: sg@efficientip.com
MFC with: r367093
The way netmap TX is handled in iflib when TX interrupts are not
used (IFC_NETMAP_TX_IRQ not set) has some issues:
- The netmap_tx_irq() function gets called by iflib_timer(), which
gets scheduled with tick granularity (hz). This is not frequent
enough for 10Gbps NICs and beyond (e.g., ixgbe or ixl). The end
result is that the transmitting netmap application is not woken
up fast enough to saturate the link with small packets.
- The iflib_timer() functions also calls isc_txd_credits_update()
to ask for more TX completion updates. However, this violates
the netmap requirement that only txsync can access the TX queue
for datapath operations. Only netmap_tx_irq() may be called out
of the txsync context.
This change introduces per-tx-queue netmap timers, using microsecond
granularity to ensure that netmap_tx_irq() can be called often enough
to allow for maximum packet rate. The timer routine simply calls
netmap_tx_irq() to wake up the netmap application. The latter will
wake up and call txsync to collect TX completion updates.
This change brings back line rate speed with small packets for ixgbe.
For the time being, timer expiration is hardcoded to 90 microseconds,
in order to avoid introducing a new sysctl.
We may eventually implement an adaptive expiration period or use another
deferred work mechanism in place of timers.
Also, fix the timers usage to make sure that each queue is serviced
by a different CPU.
PR: 248652
Reported by: sg@efficientip.com
MFC after: 2 weeks
the failover protocol is supported due to limitations in the IPoIB
architecture. Refer to the lagg(4) manual page for how to configure
and use this new feature. A new network interface type,
IFT_INFINIBANDLAG, has been added, similar to the existing
IFT_IEEE8023ADLAG .
ifconfig(8) has been updated to accept a new laggtype argument when
creating lagg(4) network interfaces. This new argument is used to
distinguish between ethernet and infiniband type of lagg(4) network
interface. The laggtype argument is optional and defaults to
ethernet. The lagg(4) command line syntax is backwards compatible.
Differential Revision: https://reviews.freebsd.org/D26254
Reviewed by: melifaro@
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
802.1ad interfaces are created with ifconfig using the "vlanproto" parameter.
Eg., the following creates a 802.1Q VLAN (id #42) over a 802.1ad S-VLAN
(id #5) over a physical Ethernet interface (em0).
ifconfig vlan5 create vlandev em0 vlan 5 vlanproto 802.1ad up
ifconfig vlan42 create vlandev vlan5 vlan 42 inet 10.5.42.1/24
VLAN_MTU, VLAN_HWCSUM and VLAN_TSO capabilities should be properly
supported. VLAN_HWTAGGING is only partially supported, as there is
currently no IFCAP_VLAN_* denoting the possibility to set the VLAN
EtherType to anything else than 0x8100 (802.1ad uses 0x88A8).
Submitted by: Olivier Piras
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D26436
connections over multiple paths.
Multipath routing relies on mbuf flowid data for both transit
and outbound traffic. Current code fills mbuf flowid from inp_flowid
for connection-oriented sockets. However, inp_flowid is currently
not calculated for outbound connections.
This change creates simple hashing functions and starts calculating hashes
for TCP,UDP/UDP-Lite and raw IP if multipath routes are present in the
system.
Reviewed by: glebius (previous version),ae
Differential Revision: https://reviews.freebsd.org/D26523
This flag is going to be used by IKE daemon to signal if
Extended Sequence Number feature is going to be used.
Value for this flag was taken from OpenBSD source code
6b4cbaf181
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: ae
Differential revision: https://reviews.freebsd.org/D22366
Obtained from: Semihalf
Sponsored by: Stormshield
This adds a new IP_PROTO / IPV6_PROTO setsockopt (getsockopt)
option IP(V6)_VLAN_PCP, which can be set to -1 (interface
default), or explicitly to any priority between 0 and 7.
Note that for untagged traffic, explicitly adding a
priority will insert a special 801.1Q vlan header with
vlan ID = 0 to carry the priority setting
Reviewed by: gallatin, rrs
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26409
We're not allowed to hold NET_EPOCH while sleeping, so when we call ioctl()
handlers for member interfaces we cannot be in NET_EPOCH. We still need some
protection of our CK_LISTs, so hold BRIDGE_LOCK instead.
That requires changing BRIDGE_LOCK into a sleepable lock, and separating the
BRIDGE_RT_LOCK, to protect bridge_rtnode lists. That lock is taken in the data
path (while in NET_EPOCH), so it cannot be a sleepable lock.
While here document the locking strategy.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26418
Both cxgbe(4) and mlx5(4) wrapped the existing send tag header with
their own identical headers that stored the type that the
type-specific tag structures inherited from, so in practice it seems
drivers need this in the tag anyway. This permits removing these
extra header indirections (struct cxgbe_snd_tag and struct
mlx5e_snd_tag).
In addition, this permits driver-independent code to query the type of
a tag, e.g. to know what type of tag is being queried via
if_snd_query.
Reviewed by: gallatin, hselasky, np, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26689
Nexthop lookup was not consireding rt_flags when doing
structure comparison, which lead to an original nexthop
selection when changing flags. Fix the case by adding
rt_flags field into comparison and rearranging nhop_priv
fields to allow for efficient matching.
Fix `route change X/Y flags` case - recent changes
disallowed specifying RTF_GATEWAY flag without actual gateway.
It turns out, route(8) fills in RTF_GATEWAY by default, unless
-interface flag is specified. Fix regression by clearing
RTF_GATEWAY flag instead of failing.
Fix route flag reporting in RTM_CHANGE messages by explicitly
updating rtm_flags after operation competion.
Add IPv4/IPv6 tests for flag-only route changes.
This change is based on the nexthop objects landed in D24232.
The change introduces the concept of nexthop groups.
Each group contains the collection of nexthops with their
relative weights and a dataplane-optimized structure to enable
efficient nexthop selection.
Simular to the nexthops, nexthop groups are immutable. Dataplane part
gets compiled during group creation and is basically an array of
nexthop pointers, compiled w.r.t their weights.
With this change, `rt_nhop` field of `struct rtentry` contains either
nexthop or nexthop group. They are distinguished by the presense of
NHF_MULTIPATH flag.
All dataplane lookup functions returns pointer to the nexthop object,
leaving nexhop groups details inside routing subsystem.
User-visible changes:
The change is intended to be backward-compatible: all non-mpath operations
should work as before with ROUTE_MPATH and net.route.multipath=1.
All routes now comes with weight, default weight is 1, maximum is 2^24-1.
Current maximum multipath group width is statically set to 64.
This will become sysctl-tunable in the followup changes.
Using functionality:
* Recompile kernel with ROUTE_MPATH
* set net.route.multipath to 1
route add -6 2001:db8::/32 2001:db8::2 -weight 10
route add -6 2001:db8::/32 2001:db8::3 -weight 20
netstat -6On
Nexthop groups data
Internet6:
GrpIdx NhIdx Weight Slots Gateway Netif Refcnt
1 ------- ------- ------- --------------------------------------- --------- 1
13 10 1 2001:db8::2 vlan2
14 20 2 2001:db8::3 vlan2
Next steps:
* Land outbound hashing for locally-originated routes ( D26523 ).
* Fix net/bird multipath (net/frr seems to work fine)
* Add ROUTE_MPATH to GENERIC
* Set net.route.multipath=1 by default
Tested by: olivier
Reviewed by: glebius
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26449
For interfaces that do not support SIOCGIFMEDIA (for which there are
quite a few) the only fallback is to query the interface for
if_data->ifi_link_state. While it's possible to get at if_data for an
interface via getifaddrs(3) or sysctl, both are heavy weight mechanisms.
SIOCGIFDATA is a simple ioctl to retrieve this fast with very little
resource use in comparison. This implementation mirrors that of other
similar ioctls in FreeBSD.
Submitted by: Roy Marples <roy@marples.name>
Reviewed by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26538
* Split rt_setmetrics into get_info_weight() and rt_set_expire_info(),
as these two can be applied at different entities and at different times.
* Start filling route weight in route change notifications
* Pass flowid to UDP/raw IP route lookups
* Rework nd6_subscription_cb() and sysctl_dumpentry() to prepare for the fact
that rtentry can contain multiple nexthops.
Differential Revision: https://reviews.freebsd.org/D26497
* Zero gw_sdl if switching to interface route - the assumption
that underlying storage is zeroed is incorrect with route changes.
* Apply proper flag mask to rte.
Reported by: vangyzen
This lets a VXLAN pseudo-interface take advantage of hardware checksumming (tx
and rx), TSO, and RSS if the NIC is capable of performing these operations on
inner VXLAN traffic.
A VXLAN interface inherits the capabilities of its vxlandev interface if one is
specified or of the interface that hosts the vxlanlocal address. If other
interfaces will carry traffic for that VXLAN then they must have the same
hardware capabilities.
On transmit, if_vxlan verifies that the outbound interface has the required
capabilities and then translates the CSUM_ flags to their inner equivalents.
This tells the hardware ifnet that it needs to operate on the inner frame and
not the outer VXLAN headers.
An event is generated when a VXLAN ifnet starts. This allows hardware drivers to
configure their devices to expect VXLAN traffic on the specified incoming port.
On receive, the hardware does RSS and checksum verification on the inner frame.
if_vxlan now does a direct netisr dispatch to take full advantage of RSS. It is
not very clear why it didn't do this already.
Future work:
Rx: it should be possible to avoid the first trip up the protocol stack to get
the frame to if_vxlan just so it can decapsulate and requeue for a second trip
up the stack. The hardware NIC driver could directly call an if_vxlan receive
routine for VXLAN traffic instead.
Rx: LRO. depends on what happens with the previous item. There will have to to
be a mechanism to indicate that it's time for if_vxlan to flush its LRO state.
Reviewed by: kib@
Relnotes: Yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25873
These are similar to the existing VLAN capabilities.
Reviewed by: kib@
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25873
Currently kernel requests deletion for the certain routes with specified gateway,
but this gateway is not actually checked. With multipath routes, internal gateway
checking becomes mandatory. Add the logic performing this check.
Generalise RTF_PINNED routes to the generic route priorities, simplifying the logic.
Add lookup_prefix() function to perform exact match search based on data in @info.
Differential Revision: https://reviews.freebsd.org/D26356
There's a race where dying vnets move their interfaces back to their original
vnet, and if_epair cleanup (where deleting one interface also deletes the other
end of the epair). This is commonly triggered by the pf tests, but also by
cleanup of vnet jails.
As we've not yet been able to fix the root cause of the issue work around the
panic by not dereferencing a NULL softc in epair_qflush() and by not
re-attaching DYING interfaces.
This isn't a full fix, but makes a very common panic far less likely.
PR: 244703, 238870
Reviewed by: lutz_donnerhacke.de
MFC after: 4 days
Differential Revision: https://reviews.freebsd.org/D26324
Use the same link-level gateway when adding or deleting interface routes.
This helps nexthop checking in the upcoming multipath changes.
Differential Revision: https://reviews.freebsd.org/D26317
After nexthop introduction, loopback routes for the interface addresses
were created without embedding actual interface index in the gateway.
The latter is needed to pass the IPv6 scope during transmission via loopback..
Fix the regression by actually using passed gateway data with interface index.
Differential Revision: https://reviews.freebsd.org/D26306
The pidx argument of isc_rxd_flush() indicates which is the last valid
receive descriptor to be used by the NIC. However, current code has
multiple issues:
- Intel drivers write pidx to their RDT register, which means that
NICs will only use the descriptors up to pidx-1 (modulo ring size N),
and won't actually use the one pointed by pidx. This does not break
reception, but it is anyway confusing and suboptimal (the NIC will
actually see only N-2 descriptors as available, rather than N-1).
Other drivers (if_vmx, if_bnxt, if_mgb) adhere to this semantic).
- The semantic used by Intel (RDT is one descriptor past the last
valid one) is used by most (if not all) NICs, and it is also used
on the TX side (also in iflib). Since iflib is not currently
using this semantic for RX, it must decrement fl->ifl_pidx
(modulo N) before calling isc_rxd_flush(), and then the
per-driver callback implementation must increment the index
again (to match the real semantic). This is confusing and suboptimal.
- The iflib refill function is also called at initialization.
However, in case the ring size is smaller than 128 (e.g. if_mgb),
the refill function will actually prepare all the receive
descriptors (N), without leaving one unused, as most of NICs assume
(e.g. to avoid RDT to overrun RDH). I can speculate that the code
looks like this right now because this issue showed up during
testing (e.g. with if_mgb), and it was easy to workaround by
decrementing pidx before isc_rxd_flush().
The goal of this change is to simplify the code (removing a bunch
of instructions from the RX fast path), and to make the semantic of
isc_rxd_flush() consistent across drivers. To achieve this, we:
- change the semantics of the pidx argument to the usual one (that
is the index one past the last valid one), so that both iflib and
drivers avoid the decrement/increment dance.
- fix the initialization code to prepare at most N-1 descriptors.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26191
No functional changes.
Initially this function was created to perform runtime flag conversions
for the previous incarnation of fib lookup functions. As these functions
got deprecated, move the function to the file with the only remaining
caller. Lastly, rename it to convert_rt_to_nh_flags() to follow the
naming notation.
No functional changes.
net/route/shared.h was created in the inital phases of nexthop conversion.
It was intended to serve the same purpose as route_var.h - share definitions
of functions and structures between the routing subsystem components. At
that time route_var.h was included by many files external to the routing
subsystem, which largerly defeats its purpose.
As currently this is not the case anymore and amount of route_var.h includes
is roughly the same as shared.h, retire the latter in favour of the former.
As nexthops are immutable, some operations such as route attribute changes
require nexthop fetching, forking, modification and route switching.
These operations are not atomic, so they may need to be retried multiple
times in presence of multiple speakers changing the same route.
This change introduces "synchronisation" primitive: route_update_conditional(),
simplifying logic for route changes and upcoming multipath operations.
Differential Revision: https://reviews.freebsd.org/D26216
At initialization time, the netmap RX refill function used to
prepare the NIC RX ring with N-1 buffers rather than N (with
N equal to the number of descriptors in the NIC RX ring).
This is not how netmap is supposed to work, as it would keep
kring->nr_hwcur not in sync with the NIC "next index to refill"
(i.e., fl->ifl_pidx). Instead we prepare N buffers, although we
still publish (with isc_rxd_flush()) only the first N-1 buffers,
to avoid the NIC producer pointer to overrun the NIC consumer
pointer (for NICs where this is a real issue, e.g. Intel ones).
MFC after: 2 weeks
rtentry lock traditionally served 2 purposed: first was protecting refcounts,
the second was assuring consistent field access/changes.
Since route nexthop introduction, the need for the former disappeared and
the need for the latter reduced.
To be more precise, the following rte field are mutable:
rt_nhop (nexthop pointer, updated with RIB_WLOCK, passed in rib_cmd_info)
rte_flags (only RTF_HOST and RTF_UP, where RTF_UP gets changed at rte removal)
rt_weight (relative weight, updated with RIB_WLOCK, passed in rib_cmd_info)
rt_expire (time when rte deletion is scheduled, updated with RIB_WLOCK)
rt_chain (deletion chain pointer, updated with RIB_WLOCK)
All of them are updated under RIB_WLOCK, so the only remaining concern is the reading.
rt_nhop and rt_weight (addressed in this review) are read under rib lock and
stored in the rib_cmd_info, so the caller has no problem with consitency.
rte_flags is currently read unlocked in rtsock reporting (however the scope
is only RTF_UP flag, which is pretty static).
rt_expire is currently read unlocked in rtsock reporting.
rt_chain accesses are safe, as this is only used at route deletion.
rt_expire and rte_flags reads will be dealt in a separate reviews soon.
Differential Revision: https://reviews.freebsd.org/D26162
The semantic of the pidx argument of isc_rxd_flush() is the
last valid index of in the free list, rather than the next
index to be published. However, netmap was still using the
old convention. While there, also refactor the netmap_fl_refill()
to simplify a little bit and add an assertion.
MFC after: 2 weeks
No functional changes.
Most of the routing flags are stored in the netxtop instead of rtentry.
Rename rt->rt_flags to rt->rte_flags to simplify reading/modifying code
checking routing flags.
In the new multipath code, rt->rt_nhop may actually point to nexthop group
instead of nhop. To ease transition, reduce the amount of rt->rt_nhop->...
accesses.
Differential Revision: https://reviews.freebsd.org/D26156
Allow to dynamically grow the amount of fibs in each vnet.
This change alters current behavior. Currently, if one defines
ROUTETABLES > 1 in the kernel config, each vnet will be created
with the number of fibs defined in the kernel config.
After this commit vnets will be created with fibs=1.
Dynamic net.fibs is not compatible with net.add_addr_allfibs.
The plan is to deprecate the latter and make
net.add_addr_allfibs=0 default behaviour.
Reviewed by: glebius
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26062
boundry change the last two IF_Mbps(2500) and additionally one
IF_Mbps(5000) to ULL as well.
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (d/b/a "Netgate")
Remove unused arguments from dom_rtattach/dom_rtdetach functions and make
them return/accept 'struct rib_head' instead of 'void **'.
Declare inet/inet6 implementations in the relevant _var.h headers similar
to domifattach / domifdetach.
Add rib_subscribe_internal() function to accept subscriptions to the rnh
directly.
Differential Revision: https://reviews.freebsd.org/D26053
The lagg_clone_destroy() handles detach and waiting for ifconfig callers
to drain already.
This narrows the race for 2 panics that the tests triggered. Both were a
consequence of adding a port to the lagg device after it had already detached
from all of its ports. The link state task would run after lagg_clone_destroy()
free'd the lagg softc.
kernel:trap_fatal+0xa4
kernel:trap_pfault+0x61
kernel:trap+0x316
kernel:witness_checkorder+0x6d
kernel:_sx_xlock+0x72
if_lagg.ko:lagg_port_state+0x3b
kernel:if_down+0x144
kernel:if_detach+0x659
if_tap.ko:tap_destroy+0x46
kernel:if_clone_destroyif+0x1b7
kernel:if_clone_destroy+0x8d
kernel:ifioctl+0x29c
kernel:kern_ioctl+0x2bd
kernel:sys_ioctl+0x16d
kernel:amd64_syscall+0x337
kernel:trap_fatal+0xa4
kernel:trap_pfault+0x61
kernel:trap+0x316
kernel:witness_checkorder+0x6d
kernel:_sx_xlock+0x72
if_lagg.ko:lagg_port_state+0x3b
kernel:do_link_state_change+0x9b
kernel:taskqueue_run_locked+0x10b
kernel:taskqueue_run+0x49
kernel:ithread_loop+0x19c
kernel:fork_exit+0x83
PR: 244168
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D25284
After moving the route control plane code from net/route.c,
all rtzone users ended up being in net/route_ctl.c.
Move uma(9) rtzone setup/teardown code to net/route_ctl.c as well
to have everything in a single place.
While here, remove custom initializers from the zone.
It was added originally to avoid setup/teardown of costy per-cpu couters.
With these counters removed, the only remaining job was avoiding rte mutex
setup/teardown. Mutex setup is relatively cheap. Additionally, this mutex
will soon be removed. With that in mind, there is no sense in keeping
custom zone callbacks.
Differential Revision: https://reviews.freebsd.org/D26051
It is possible for rn_delete() to return NULL. If this happens, then set
*perror to ESRCH, as is done in the rest of the function.
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D25871
For drivers with IFLIB_HAS_RXCQ set, there is a separate completion
queue. In this case, the netmap rxsync routine needs to update
rxq->ifr_cq_cidx in the same way it is updated by iflib_rxeof().
This improves the situation for vmx(4) and bnxt(4) drivers, which
use iflib and have the IFLIB_HAS_RXCQ bit set.
PR: 248494
MFC after: 3 weeks
First, fix the initialization of the fl->ifl_rxd_idxs array,
which was affected by an off-by-one bug.
Once there, refactor the function to use better names for
local variables, optimize the variable assignments, and
merge the bus_dmamap_sync() inner loop with the outer one.
PR: 248494
MFC after: 3 weeks
