IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs. This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.
For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.
Approved by: re (kib)
MFC after: 6 weeks
doesn't require parts of the Expansion ROM to be copied around,
for obtaining the MAC address on !OFW platforms.
- Don't unnecessarily cache bus space tag and handle nor RIDs
in the softcs of the front-ends.
- Don't use function calls in initializers.
- Let the SBus front-end depend on sbus(4).
o Add CTASSERTs ensuring that HME_NRXDESC and HME_NTXDESC are set to
legal values.
o Use appropriate maxsize, nsegments and maxsegsize parameters when
creating DMA tags and correct some comments related to them.
o The FreeBSD bus_dmamap_sync(9) supports ored together flags for quite
some time now so collapse calls accordingly.
o Add missing BUS_DMASYNC_PREREAD when syncing the control DMA maps in
hme_rint() and hme_start_locked().
o Keep state of the link state and use it to enable or disable the MAC
in hme_mii_statchg() accordingly as well as to return early from
hme_start_locked() in case the link is down.
o Introduce a sc_flags and use it to replace individual members like
sc_pci.
o Add bus_barrier(9) calls to hme_mac_bitflip(), hme_mii_readreg(),
hme_mii_writereg() and hme_stop() to ensure the respective bit
has been written before we starting polling on it and for the right
bits to change.
o Rather just returning in case hme_mac_bitflip() fails and leaving us
in an undefined state report the problem and move on; chances are
the requested configuration will become active shortly after.
o Don't call hme_start_locked() in hme_init_locked() unconditionally
but only after calls to hme_init_locked() when it's appropriate, i.e.
in hme_watchdog().
o Add a KASSERT which asserts nsegs is valid also to hme_load_txmbuf().
o In hme_load_txmbuf():
- use a maximum of the newly introduced HME_NTXSEGS segments instead
of the incorrect HME_NTXQ, which reflects the maximum TX queue
length, for loading the mbufs and put the DMA segments back onto
the stack instead of the softc as 16 should be ok there.
- use the common errno(2) return values instead of homegrown ones,
- given that hme_load_txmbuf() is allowed to fail resulting in a
packet drop for quite some time now implement the functionality of
hme_txcksum() by means of m_pullup(9), which de-obfuscates the code
and allows to always retrieve the correct length of the IP header, [1]
- also add a KASSERT which asserts nsegs is valid,
- take advantage of m_collapse(9) instead of m_defrag(9) for
performance reasons.
o Don't bother to check whether the interface is running or whether its
queue is empty before calling hme_start_locked() in hme_tint(), the
former will check these anyway.
o In hme_intr() call hme_rint() before hme_tint() as gem_tint() may
take quite a while to return when it calls hme_start_locked().
o Get rid of sc_debug and just check if_flags for IFF_DEBUG directly.
o Add a shadow sc_ifflags so we don't reset the chip when unnecessary.
o Handle IFF_ALLMULTI correctly. [2]
o Use PCIR_BAR instead of a homegrown macro.
o Replace sc_enaddr[6] with sc_enaddr[ETHER_ADDR_LEN].
o Use the maximum of 256 TX descriptors for better performance as using
all of them has no additional static cost rather than using just half
of them.
Reported by: rwatson [2]
Suggested by: yongari [1]
Reviewed by: yongari
MFC after: 1 month
hme_watchdog() in order to avoid races accessing if_timer.
- Use bus_get_dma_tag() so hme(4) works on platforms requiring it.
- Don't bother to set if_mtu to ETHERMTU, ether_ifattach() does that.
- In hme_eint() print MIF register contents on MIF interrupts.
- In hme_mifinit() don't bother to preserve the previous MIF config.
This was mainly done in order to preserve the PHY select bit (external
or internal PHY) but which only needs to be set as appropriate when
reading from or writing to the desired PHY in hme_mii_{read,write}reg().
Similarly don't bother to set the PHY select bit in hme_mii_statchg().
- In hme_mii_{read,write}reg() ignore requests to PHYs other than the
external and internal PHY one.
- Move enabling/disabling the MII drivers of the external transceiver
from hme_init_locked() and based on the sheer presence of an external
to hme_mifinit() and based on the currently selected media, defaulting
to the internal transceiver when the media hasn't been set, yet.
Invoke hme_mifinit() from the newly added hme_mediachange_locked() so
the setting of the MII drivers is updated when changing media.
These changes keep the MII bus from wedging (which manifests in the HME
and the PHYs no longer being able to communicate with each other) when
the PHY device drivers isolate the unused PHY in two-PHY configurations
as present in f.e. Netra t1 100 while changing media, either from
hme_init_locked() (see also below) or via ifconfig(8). They also allow
for using both transceivers/PHYs.
- In the newly added hme_mediachange_locked() also reset the PHYs in two-
PHY configurations before invoking mii_mediachg(). This is required
for successfully unisolating the previously unused PHY when switching
between PHYs.
- Now that changing media should no longer cause problems back out rev.
1.27 and re-enable setting the current media in hme_init_locked() (see
the commit message of rev. 1.23 for more info).
These changes are roughly a merge of NetBSD gem.c rev. 1.32 - 1.35 (1.30
was already fixed differently in our 1.36; 1.31 and 1.32 were wrong) with
some parts reworked and things that don't make sense like setting the MII
drivers and restoring the previous MIF and XIF settings in hme_mii_{read,
write}reg() omitted.
MFC after: 2 weeks
Use proper pointer dereference to inform modified mbuf chains to
caller.
While I'm here perform checksum offload setup after loading DMA
maps as m_defrag(9) can return new mbuf chains.
In collaboration with: glebius
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.
- Move hardware counter reading/zeroing to hme_tick(). This saves
8 register access per interrupt. [1]
- Use imax macro for getting max. argument between two integers.
- Invoke bus_dmamap_sync(9) first before freeing mbuf.
- Check driver queue first to reduce locking operation in hme_start_locked()
and interrupt handler.
- Simplyfy watchdog timer setup in interrupt handler.
- Don't log normal errors such as RX overrun. If we have DMA stuck
condition, reinitialize the driver and log it.
Reviewed by: marius
Obtained from: OpenBSD [1]
and detach() since mtx_lock() will assert that already since the driver
lock is not recursive.
- Move the call to callout_init_mtx() before hme_stop() so that the
callout_stop() in hme_stop() doesn't operate on an uninitialized callout
structure during attach.
Reported by: yongari (2)
MFC after: 3 days
that if softclock is running on another CPU and is blocked on our driver
lock, we will wait until it has acquired the lock, seen that it was
cancelled, dropped the lock, and awakened us so that we can safely destroy
the mutex.
MFC after: 3 days
- Use the driver lock instead of Giant in a bus dma callback.
- Clear IFF_DRV_(RUNNING|OACTIVE) in hme_stop() instead of just clearing
RUNNING in hme_ioctl() to be more like other ethernet drivers.
- Lock the driver lock around mii operations.
- Remove spls.
- Cleanup locking in hme_ioctl().
MFC after: 1 week
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.
Problem reported by: Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after: 1 week
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
program RXMAC to discard frames with SA field matching the stations's
MAC address. Experimentation shows that HME receives its own frames
when it operates at 10Mbps half-duplex. With this change HME runs at
10Mbps half-duplx should work with IPv6.
(No more "DAD detected duplicate IPv6 address".)
Reported by: jacques brierre <jbrierre AT bellsouth DOT net>
Reviewed by: marius
and the X1034A (quad HME; QFE) cards the X1033A (single HME) don't have a
PCI-PCI-bridge so we can't rely on the PCI slot number being useable as
index for the network address to read from the VPD on the latter. Use
the end tag to determine whether it is a QFE VPD with 4 NAs and only use
the slot number as index in this case.
- Remove a useless check.
Prodded by: joerg
Additional testing by: joerg
MFC after: 1 day
The cause of "Duplicate mbuf free panic" is in the programming
error of hme_load_txmbuf(). The code path of the panic is the
following.
1. Due to unknown reason DMA engine was freezed. So TX descritors
of HME become full and the last failed attempt to transmit a
packet had set its associated mbuf address to hme_txdesc
structure. Also the failed packet is requeued into interface
queue structure in order to retrasmit it when there are more
available TX descritors.
2. Since DMA engine was freezed, if_timer starts to decrement its
counter. When if_timer expires it tries to reset HME. During
the reset phase, hme_meminit() is called and it frees all
associated mbuf with descriptors. The last failed mbuf is also
freed here.
3. After HME reset completed, HME starts to retransmit packets
by dequeing the first packet in interface queue.(Note! the
packet was already freed in hme_meminit()!)
4. When a TX completion interrupt is posted by the HME, driver
tries to free the successfylly transmitted mbuf. Since the
mbuf was freed in step2, now we get "Duplicate mbuf free panic".
However, the real cause is in DMA engine freeze. Since no fatal
errors reported via interrupts, there might be other cause of
the freeze. I tried hard to understand the cause of DMA engine
freeze but couldn't find any clues. It seems that the freeze
happens under very high network loads(e.g. 7.5-8.0 MB/s TX speed).
Though this fix is not enough to eliminate DMA engine freeze it's
better than panic.
Reported by: jhb via sparc64 ML
without Open Firmware:
- The PCI data structure of some HME PROMs contains a non-zero interface
revision in the class code. Thus remove the checks for matching class
code and PCI data structure length and revsion. These were pretty much
useless anyway as we only really need the pointer to the VPD which is
located before the structure length and revision fields.
- On Sun QFE (Quad FastEthernet) cards read the Nth MAC-address for the
Nth HME controller instead of always the first one for all four HMEs. [1]
- Improve the comment describing the used VPD format to better reflect
reality.
- Minor clean-up.
Prodded by: joerg [1]
- Let hme_start()/hme_init() acquire lock and then call
hme_start_locked()/hme_init_locked() respectivly.
- Teardown interrupt handler before hme_detach().
- Remove IFF_NEEDSGIANT flag and mark interrupt handler INTR_MPSAFE.
- Set callout handler to CALLOUT_MPSAFE.
- Add locks in hme MII interface.
Reviewed by: jake
Tested by: Julian C. Dunn <jdunn at opentrend dot net>
MFC after: 2 weeks
without Open Firmware directly instead of using OF_getetheraddr(). This is
a bit painful though, as the MAC address is contained in the NA field of
the VPD of the EBus bridge, which is is another function of the same chip.
To make it worse, the VPD of the EBus bridge can't be accessed via the PCI
capability pointer but has to be digged out from the Boot PROM and has a
non-standard format.
The PCI VPD struct and macros used here should be part of the FreeBSD PCI
code nevertheless.
Approved by: tmm
Based on: NetBSD
Tested with: Sun X1032A (hme(4)-isp(4)-combo card) on alpha and i386
subset ("compatible", "device_type", "model" and "name") of the standard
properties in drivers for devices on Open Firmware supported busses. The
standard properties "reg", "interrupts" und "address" are not covered by
this interface because they are only of interest in the respective bridge
code. There's a remaining standard property "status" which is unclear how
to support properly but which also isn't used in FreeBSD at present.
This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
This in turn allows to simplify and remove code-duplication in drivers for
devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
drivers for their children to use the ofw_bus kobj-interface. The IVAR-
interfaces of the Central, EBus and FHC are entirely replaced by this. The
PCI bus driver used its own kobj-interface and now also uses the ofw_bus
one. The IVARs special to the SBus, e.g. for retrieving the burst size,
remain.
Beware: this causes an ABI-breakage for modules of drivers which used the
IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
recompiled.
The style-inconsistencies introduced in some of the bus drivers will be
fixed by tmm@ in a generic clean-up of the respective drivers later (he
requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
use the ofw_bus kobj-interface. This invloves removing the IVARs related
to the "reg" property which were unused and a leftover from the NetBSD
origini of the code. There's no ABI-breakage caused by this because none
of these driver are currently built as modules.
There are other powerpc bus drivers which can be converted to the ofw_bus
kobj-interface, e.g. the PCI bus driver, which should be done together
with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
advantage of the ofw_bus kobj-interface and simplify them a bit.
Reviewed by: grehan, tmm
Approved by: re (scottl)
Discussed with: tmm
Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
Since HME doesn't compensate the checksum for UDP datagram which
can yield to 0x0, UDP transmit checksum offload is disabled by
default. The UDP Transmit checksum offload can be reactivated
by setting special link option link0 with ifconfig(8).
Approved by: jake (mentor)
Reviewed by: tmm
Tested by: Herve Boulouis <amon@sockar.homeip.net>
pass any traffic. Unfortunately this means no full-duplex link with auto-
negotiation on hme(4) using DP83840A PHYs again.
I really thought I had tested this also on a Netra t1 100...
This is part 2/2 of fixing autonegotiation on hme(4) using DP83840A PHYs.
It appears to also fix the occasional problems to establish a link on
hme(4) using LU6612 PHYs and shouldn't hurt on those using QS6612 PHYs.
Obtained from: NetBSD
and Rx frames up to 8191 octets, so it is perfectly capable of supporting
vlan(4)-style VLAN natively.
Thus, make it support VLAN `oversize' frames.
Reviewed by: tmm
