This macro is confusing as it is not related to the similarly named
TLS_DTV_OFFSET. Instead, replace its one use with the desired
expression which is the same on all platforms.
Reviewed by: kib, emaste, jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33345
COMPILER_TYPE is not set during cleandir and perhaps other non-build
targets, and a build with ASAN or UBSAN enabled failed with an error
reporting that runtime libraries could not be built.
PR: 260099
Reviewed by: dim
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32805
Fix kvm_getloadavg() to work correctly on vmcores for modern kernel
versions. The kernels no longer include the `_fscale` symbol causing
the kvm_nlist() invocation to fail. The code seemed to already assume
that `_fscale` could be missing but the early kvm_nlist() result check
has caused the function to fail if any symbol were missing. Modify
it to only treat `_averunnable` as obligatory, and handle missing
`_fscale` gracefully.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32884
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes#12728
There's no point in a knob to avoid installing a half dozen manpages.
It's undocumented and unused in the tree. Online, the only metions
I've found are the FreeBSD source tree, a commit in DragonFly BSD
removing it, and some lists of build options for small systems where
it's inevitably redundant due to an accompanying NO_MAN.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D33310
Otherwise the asm stub is used and libthr interposition does not work.
Reviewed by: kib
Fixes: 21f749da82 ("libthr: wrap pdfork(2), same as fork(2).")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Also use the term operation consistently, over the command.
Reviewed by: emaste, jhb, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33277
that returns struct kinfo_file for the given file descriptor. Among
other data, it also returns kf_path, if file op was able to restore file
path.
Reviewed by: jhb, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33277
When SOCK_DGRAM is used, a portion of the datagram is discarded during
the initial recv() when getting the nvlist_header.
To workaround this, use MSG_PEEK for the initial recv() when using a
datagram socket.
Add tests for SOCK_DGRAM with nvlist_send()/nvlist_recv().
Differential Revision: https://reviews.freebsd.org/D32722
Add two underscore characters "__" to names of BIT_* and BITSET_*
macros to move them to the implementation name space and to prevent
a name space pollution due to BIT_* macros in 3rd party programs with
conflicting parameter signatures.
These prefixed macro names are used in kernel header files to define
macros in e.g. sched.h, sys/cpuset.h and sys/domainset.h.
If C programs are built with either -D_KERNEL (automatically passed
when building a kernel or kernel modules) or -D_WANT_FREENBSD_BITSET
(or this macros is defined in the source code before including the
bitset macros), then all macros are made visible with their previous
names, too. E.g., both __BIT_SET() and BIT_SET() are visible with
either of _KERNEL or _WANT_FREEBSD_BITSET defined.
The main reason for this change is that some 3rd party sources
including sched.h have been found to contain conflicting BIT_*
macros.
As a work-around, parts of shed.h have been made conditional and
depend on _WITH_CPU_SET_T being set when sched.h is included.
Ports that expect the full functionality provided by sched.h need
to be built with -D_WITH_CPU_SET_T. But this leads to conflicts if
BIT_* macros are defined in that program, too.
This patch set makes all of sched.h visible again without this
parameter being passed and without any name space pollution due
to BIT_* macros becoming visible when sched.h is included.
This patch set will be backported to the STABLE branches, but ports
will need to use -D_WITH_CPU_SET_T as long as there are supported
releases that do not contain these patches.
Reviewed by: kib, markj
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D33235
This is a MAC policy module that grants scheduling privileges based on
group membership. Users or processes in the group realtime (gid 47) are
allowed to run threads and processes with realtime scheduling priority.
For timing-sensitive, low-latency software like audio/jack, running with
realtime priority helps to avoid stutter and gaps.
PR: 239125
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D33191
Some shared libraries specify mappings that leave a gap (actually a
MAP_GUARD mapping) in between the file mappings (libcrypto.so was
the one I found), and this would cause rd_loadobj_iter() to report
the mapping info incorrectly, leaving out rdl_path and misreporting
rdl_offset for file mappings after the gap. Fix rd_loadobj_iter()
to handle this situation.
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D32950
ki_fd is legitimately NULL when 32bit process requests process data
from 64bit host kernel. The field is not used by the code for sysctl
case; procstat_getfiles_kvm() checks ki_fd.
PR: 260174
Reported by: Damjan Jovanovic <damjan.jov@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This reverts commit 266f97b5e9, reversing
changes made to a10253cffe.
A mismerge of a merge to catch up to main resulted in files being
committed which should not have been.
Section 9.5 of RFC 6458 (SCTP Socket API) requires that
sctp_getladdrs() returns 0 in case the socket is unbound. This
is the cause of reporting 0 addresses. So don't indicate an
error, just report this case as required.
PR: 260117
MFC after: 1 week
When calling getsockopt() with SCTP_GET_LOCAL_ADDR_SIZE, use a
pointer to a 32-bit variable, since this is what the kernel
expects.
While there, do some cleanups.
MFC after: 1 week
Reviewed-by: Felix Dörre <felix@dogcraft.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#12765
The restriction that an encryption key must be at least
MIN_PASSPHRASE_LEN characters long make sense when changing the
encryption key, but not when loading: as this restriction is not
enforced in the libraries, it is possible to bypass zfs change-key's
restrictions and end up with a key that becomes impossible to load with
zfs load-key, for example through pam_zfs_key.
Reviewed-by: Felix Dörre <felix@dogcraft.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Harald van Dijk <harald@gigawatt.nl>
Closes#12765
After interrupting ZTS runs that errored out, I found that
"zpool export testpool2" was segfaulting.
This seems unnecessary.
Reviewed-by: szubersk <szuberskidamian@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12804
- Allocate ve_search on the stack, so we avoid allocating memory for
every I/O even if the VDEV cache is disabled.
- Reduce lock scope.
- Avoid locking in vdev_cache_read() when the VDEV cache is disabled.
- Sort file names properly.
- Correct comment.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#12749
This reverts commit 2886c93d1b.
The original commit has two problems:
* It sets SO_SNDBUF to be as large as MAXLINE. But for unix domain
sockets, the send buffer is bypassed. Packets go directly to the
peer's receive buffer, so setting and querying SO_SNDBUF is
ineffective. To ensure that the socket can accept messages of a
certain size, it would be necessary to add a SO_PEERRCVBUF socket
option that could query the connected peer's receive buffer size.
* It sets MAXLINE to 8 kB, which is larger than the default sockbuf size
of 4 kB. That's ok for the builtin syslogd, which sets its recvbuf
to 80 kB, but not ok for alternative sysloggers, like rsyslogd, which
use the default size.
As a consequence, writing messages of more than 4 kB with syslog() as a
non-root user while running rsyslogd would cause the logging application
to spin indefinitely within syslog().
PR: 260126
MFC: 2 weeks
Sponsored by: Axcient
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D33199
Add properties, similar to pool properties, to each vdev.
This makes use of the existing per-vdev ZAP that was added as
part of device evacuation/removal.
A large number of read-only properties are exposed,
many of the members of struct vdev_t, that provide useful
statistics.
Adds support for read-only "removing" vdev property.
Adds the "allocating" property that defaults to "on" and
can be set to "off" to prevent future allocations from that
top-level vdev.
Supports user-defined vdev properties.
Includes support for properties.vdev in SYSFS.
Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes#11711
Namely posix_spawn_file_actions_addclosefrom_np, in the form it is
provided by glibc.
Reviewed by: kevans, ngie (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33143
to wrap too long lines with function prototypes.
Reviewed by: kevans, ngie (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33143
In _citrus_prop_read_TYPE_func_ generated functions, do not ignore parsed
'-' sign, negate the value as appropriate.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D33146
It receives the malloc() result, and we do not want the malloc() call
to be optimized out, which is allowed for hosted compiler. Use dummy
for actual write though.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The variables clang13 complains about take the results of var_arg() calls.
I decided to kept variables around, annotating their definitions with
__unused, to keep clear expected types of the varargs.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
bsddialog is an attempt to write in permissive license a replacement for
libdialog.
While it is still in early stage it is good enough to already be used in
many areas, it is imported as private lib until it matures enough to be
considered as having a stable ABI
It breaks intree partial builds for every library depending on ncurses
because ncursesw.a (built without PIC) will be the first the library
path for the linker to resolve -lncursesw
Some of the functions in msun can be implemented using a compiler
builtin function to generate a small number of instructions. Implement
this support in fma, fmax, fmin, and sqrt on arm64.
Care must be taken as the builtin can be implemented as a function
call on some architectures that lack direct support. In these cases
we need to use the original code path.
As we don't set errno on failure build with -fno-math-errno so the
toolchain doesn't convert a builtin into a function call when it
detects a failure, e.g. gcc will add a call to sqrt when the input
is negative leading to an infinite loop.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32801
These are the updated version of the older Cortex Strings Library we
previously used. The Arm Optimized Routines also support CPU features
that are currently in development on FreeBSD, e.g. Branch Target
Identification (BTI). Rather than add BTI support to the old code it's
easier to just use the maintained version.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32774
Summary: The manual pages need a bit of editing for language and clarity.
Reviewers: oshogbo, #manpages
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D32976
The STDSB macro is passed to the ffs_sbget() routine to fetch a
UFS/FFS superblock "from the stadard place". It was identically defined
in lib/libufs/libufs.h, stand/libsa/ufs.c, sys/ufs/ffs/ffs_extern.h,
and sys/ufs/ffs/ffs_subr.c. Delete it from these four files and
define it instead in sys/ufs/ffs/fs.h. All existing uses of this macro
already include sys/ufs/ffs/fs.h so no include changes need to be made.
No functional change intended.
Sponsored by: Netflix
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-13-init-16847-g88e66fa60ae5, the last commit before
the upstream release/13.x branch was created.
PR: 258209
MFC after: 2 weeks
Instead of only hiding cpu_set_t compat typedef itself.
Too many software packages assume that sched_getaffinity() presence
implies full source compatibility with glibc. We can (and should)
handle missing CPU_* macros, but then there are incompatible BIT_* uses
which cannot be fixed in src/.
So hide everything under _WITH_CPU_SET_T, in particular, do not expose
sched_getcpu(), sched_get/setaffinity(), as well as CPU_* and BIT_*
macros. Consumers that want sched* functions must opt-in.
Reported by: portmgr (antoine)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
for compatibility with Linux.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32901
for compatibility with Linux.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32901
We didn't populate dyncnt/tblcnt, so `pfctl -sr -vv` might not have the
table element count.
PR: 259689
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32893
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Closes#12722Closes#12739
The ZED code currently can only turn on the fault LED for
a faulted disk in a JBOD enclosure. This extends support
for faulted NVMe disks as well.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#12648Closes#12695
Remove code that is ifdefed out on USELOOPBACK, which uses historical
class. No functional change intended.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D32712
Mark functions inet_netof(), inet_lnaof(), and inet_makeaddr() as
deprecated, as they assume Class A/B/C. inet_makeaddr() mostly works
when networks are a multiple of 8 bits, but warn for anything other
than historical classes. Reduce other mentions of network classes.
MFC after: 1 month
Reviewed by: bcr, #manpages
Differential Revision: https://reviews.freebsd.org/D32711
Currently after cleaning the variables the environment will be always
set to the intEnviron as documented in __rebuild_environ.
Reported by: lwhsu@, jenkins
The clearenv(3) function allows us to clear all environment
variable in one shot. This may be useful for security programs that
want to control the environment or what variables are passed to new
spawned programs.
Reviewed by: scf, markj (secteam), 0mp (manpages)
Differential Revision: https://reviews.freebsd.org/D28223
In ac76bc1145, I added a few volatiles to work around ctrig_test
failures with {inf,inf}. This is not necessary anymore now, since in
3b00222f15 we added -fp-exception-behavior=maytrap for clang >= 10 in
libm's Makefile. (The flag tells clang to use stricter floating point
semantics, which libm depends on.)
PR: 244732, 254911
Fixes: ac76bc1145
MFC after: 3 days
The change implements cexpl() for both ld80 and ld128 architectures.
Testing was done on x86_64 and aarch64 systems.
Along the way sincos[fl]() use an optimization that reduces the argument
to being done one rather than twice. This optimization actually pointed
to a bug in the ld128 version of sincosl(), which is now fixed. In
addition, the minmax polynomial coefficients for sincosl() have been
updated.
A concise log of the file-by-file changes follows.
* include/complex.h:
. Add a prototype for cexpl().
* lib/msun/Makefile:
. Add s_cexpl.c to the build.
. Setup a link for cexpl.3 to cexp.3.
* lib/msun/Symbol.map:
. Expose cexpl symbol in libm shared library.
* lib/msun/ld128/s_cexpl.c:
* Implementation of cexpl() for 128-bit long double architectures.
Tested on an aarch64 system.
* lib/msun/ld80/s_cexpl.c:
* Implementation of cexpl() for Intel 80-bit long double.
* lib/msun/man/cexp.3:
. Document cexpl().
* lib/msun/man/complex.3:
. Add a BUGS section about cpow[fl].
* lib/msun/src/s_cexp.c:
. Include float.h for weak references on 53-bit long double targets.
. Use sincos() to reduce argument reduction cost.
* lib/msun/src/s_cexpf.c:
. Use sincosf() to reduce argument reduction cost.
* lib/msun/src/k_sincosl.h:
. Catch up with the new minmax polynomial coefficients for the kernel for
the 128-bit cosl() implementation.
. BUG FIX: *cs was used where *sn should have been. This means that sinl()
was no computed correctly when iy != 0.
* lib/msun/src/s_cosl.c:
. Include fpmath.h to get access to IEEEl2bits.
. Replace M_PI_4 with pio4, a 64-bit or 113-bit approximation for pi / 4.
PR: 216862
MFC after: 1 week
Always use uint64_t over u_int64_t, for the sake of consistency.
No functional change.
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Allow users to set a number on rules which will be exposed as part of
the pflog header.
The intent behind this is to allow users to correlate rules across
updates (remember that pf rules continue to exist and match existing
states, even if they're removed from the active ruleset) and pflog.
Obtained from: pfSense
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32750
"has unsupported feature: [number]" seems reasonable when we can't
know what the problem was, but with the send -D removal, we know
what it was, and can explicitly tell people "don't do that; try
this if you must".
So let's.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12708
Otherwise, linking llvm binaries with this target enabled (which is not
the default) will fail with a number of undefined symbol errors:
ld: error: undefined symbol: llvm::initializeBPFAdjustOptPass(llvm::PassRegistry&)
ld: error: undefined symbol: llvm::initializeBPFCheckAndAdjustIRPass(llvm::PassRegistry&)
ld: error: undefined symbol: llvm::createBPFCheckAndAdjustIR()
ld: error: undefined symbol: llvm::createBPFAdjustOpt()
ld: error: undefined symbol: llvm::BPFAdjustOptPass::run(llvm::Module&, llvm::AnalysisManager<llvm::Module>&)
Reported by: Michael Dexter <editor@callfortesting.org>
MFC after: 3 days
As mention previously, the minmax polynomial approximation
in the kernel for cosl() seem to have a bad set of coefficients.
In testing, cosl() in the interval [0.785, pi/4] for 1 million
values and pi/4 written to 37 decimal digits. The old version
on an aarch64 system gave
% tlibm/tlibm_lmath -l -x 0.78 -X
7.85398163397448309615660845819875721e-1L cos
Interval tested for cosl: [0.78,0.785398]
count: 1000000
xm = 7.80213913234863919029058821396125599e-01L
libm = 7.10763080972549562455058499280609083e-01L
mpfr = 7.10763080972549562455058499280608983e-01L
ULP = 1.04431
The max ULP exceeds 1, which is not good. So, I rinsed off a 10
year code and recomputed coefficients. The new minmax polynomial
now yields
% tlibm/tlibm_lmath -l -x 0.78 -X
7.85398163397448309615660845819875721e-1L cos
Interval tested for cosl: [0.78,0.785398]
count: 1000000
xm = 7.82916198746768272588844890973704219e-01L
libm = 7.08859615479571058183956453286628396e-01L
mpfr = 7.08859615479571058183956453286628469e-01L
ULP = 0.75407
which is very good.
PR: 218514
MFC after: 1 week
Mark Murray graciously provided access to an aarch64 system
to test the ld128 implementations. This patch address
* Misuses of copysignl() in sinpil() and tanpil().
* Redo the splitting of argument 'x' into an integer part and
remainder. The remainder must satify 0 <= r < 1.
* Update the reduction of the integer part to something that can
easily be seen as even or odd, e.g., sin(pi*x) = (-1)^n*sin(pi*r)
with n <= 2^112 and we an reduce n by subtracting integer powers
of 2.
* In s_cospil.c, fix typos where 'x' is used where 'ax', the
remainder, is required.
* In tanpil(), fix the use of an uninitialized variable, ax = fabsl(ax),
ax should be x in fabsl().
One item of note, in the limited tested on aarch64, the max ULP
for sinpil() and cospil() were less than 1.1 ULP, which is higher
that the desired max ULP less than 1. This was traced to the
kernel for cosl() in the fundamental interval [0,pi/4].
The coefficients in the minmax polynomial likely need refinement.
PR: 218514
MFC after: 1 week
When a parent dataset has normalization set to any value other than
"none", and a file system is created with the property "utf8only=off",
implicitly also set "normalization=none" instead of overriding the
desire for a non-UTF8 enforcing file system.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mike Swanson <mikeonthecomputer@gmail.com>
Closes#11892Closes#12038
The values of next properties: filesystem_limit, filesystem_count,
snapshot_limit, snapshot_count were returned to user as UINT64_MAX
integers in case if -p cli option is used, return 'none' value instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Fedor Uporov <fuporov.vstack@gmail.com>
Closes#9306Closes#12690
Currently, you get back "can only attach to mirrors and top-level disks"
unconditionally if zpool attach returns ENOTSUP, but that also happens
if, say, feature@device_rebuild=disabled and you tried attach -s.
So let's print an error for that case, lest people go down a rabbit hole
looking into what they did wrong.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#11414Closes#12680
It turns out, userland is much more happy with aliased property
names than the kernel is.
So let's normalize those to the expected names before we pass
them off.
Added a test case hacked up from the other recv -o/-x test that fails
on unpatched git and passes here.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#12607Closes#12609
libatf-c++ requires C++ support.
From jrtc27: bit slightly odd this isn't gated by MK_TESTS (which itself
depends on MK_CXX), but this makes sense given the current behaviour.
Reported by: Michael Dexter, Build Option Survey
Reviewed by: imp, jrtc27
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32732
In the past we built the sanitizer runtimes when building Clang
(and using Clang as the compiler) but 7676b388ad changed this to
be conditional only on using Clang, to make the runtimes available
for external Clang.
They fail to build when WITHOUT_CXX is set though, so add MK_CXX
as part of the condition.
Reported by: Michael Dexter, Build Option Survey
Reviewed by: imp, jrtc27
Fixes: 7676b388ad ("Always build the sanitizer runtimes...")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32731
The patch fixes the omission of '#include <float.h>', which is needed for
the weak reference on systems with LDBL_MANT_DIG == DBL_MANT_DIG.
PR: 218514
MFC after: 1 week
int alen is used only with SSL.
Reported by: Michael Dexter, Build Option Survey
MFC after: 3 days
Fixes: 8d5c781306 ("libradius: Fix input validation bugs")
Sponsored by: The FreeBSD Foundation
The upgrade to libdialog 1.3 included changes to the ABI.
Bump libdpv to 3 since it links against libdialog.
Reported by: Mark Millard <marklmi@yahoo.com>
Reviewed by: bapt
Fixes: a96ef45019 dialog: import dialog 1.3-20210117
Differential Revision: https://reviews.freebsd.org/D32675
libfido2 requires USB, so disable it if not available.
Reported by: peterj
Fixes: 7b1e19ad78 ("Add libfido2 to the build")
Sponsored by: The FreeBSD Foundation
A BPF descriptor only has an associated interface descriptor once it is
attached to an interface, e.g., with BIOCSETIF. Avoid dereferencing a
NULL pointer in filt_bpfwrite() if the BPF descriptor is not attached.
Reviewed by: ae
Reported by: syzbot+ae45d5166afe15a5a21d@syzkaller.appspotmail.com
Fixes: ded77e0237 ("Allow the BPF to be select for write.")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32561
Rework the generation of the linker script to make it in par with
ldscript, this also forces the regeneration of the .aldscript in the obj
dir which might in the past have ended up empty.
Tested by: manu
which is the wrapper around the vm.swap_objects sysctl, same as
kinfo_getvmobject(3) wraps vm.objects.
Submitted by: Yoshihiro Ota
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29754
Both IEEE-754 2008 and ISO/IEC TS 18661-4 define the half-cycle
trignometric functions cospi, sinpi, and tanpi. The attached
patch implements cospi[fl], sinpi[fl], and tanpi[fl]. Limited
testing on the cospi and sinpi reveal a max ULP less than 0.89;
while tanpi is more problematic with a max ULP less than 2.01
in the interval [0,0.5]. The algorithms used in these functions
are documented in {ks}_cospi.c, {ks}_sinpi.c, and s_tanpi.c.
Note. I no longer have access to a system with ld128 and
adequate support to compile and test the ld128 implementations
of these functions. Given the almost complete lack of input from
others on improvements to libm, I doubt that anyone cares. If
someone does care, the ld128 files contain a number of FIXME comments,
and in particular, while the polynomial coefficients are given
I did not update the polynomial algorithms to properly use the
coefficients.
PR: 218514
MFC after: 2 weeks
These files were copied from MUSL. Add the standard copyright notice and
SPDX-License-Identifier: MIT consistent with our new draft license
policy. It reads word for word the same as the MIT license on the SPDX
web site. Add a pointer to the MUSL COPYIRGHT file which contains a list
of all authors of MUSL.
Sponsored by: Netflix
Noticed by: Steve Kargl
From https://github.com/Yubico/libfido2:
libfido2 provides library functionality and command-line tools to
communicate with a FIDO device over USB, and to verify attestation
and assertion signatures.
libfido2 supports the FIDO U2F (CTAP 1) and FIDO 2.0 (CTAP 2)
protocols.
libfido2 will be used by ssh to support FIDO/U2F keys. It is currently
intended only for use by ssh, and so is installed as a PRIVATELIB and is
placed in the ssh pkgbase package.
This is currently disabled for the 32-bit library build as libfido2 is
not compatible with the COMPAT_32BIT hack in usb_ioctl.h.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32448
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
The intention of the zfs_iter_mounted() is to traverse the dataset
and its descendants, not the snapshots. The current code can cause
a mounted snapshot to be included and thus zfs_open() on the snapshot
with ZFS_TYPE_FILESYSTEM would print confusing message such as "cannot
open 'rpool/fs@snap': snapshot delimiter '@' is not expected here".
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Youzhong Yang <yyang@mathworks.com>
Closes#12447Closes#12448
Recognize when the host part of a sharenfs attribute is an ipv6
Literal and pass that through without modification.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Felix Dörre <felix@dogcraft.de>
Closes: #11171Closes#11939Closes: #1894
for state control over TRACE, TRAPCAP, ASLR, PROTMAX, STACKGAP,
NO_NEWPRIVS, and WXMAP.
Reported by: emaste
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32513
In some configurations (e.g. powerpc64) the llvm-readobj tool also needs
contrib/llvm-project/llvm/BinaryFormat/MsgPackWriter.cpp, so add it to
libllvm.
Reported by: Shawn Webb <shawn.webb@hardenedbsd.org>
Fixes: 1b85b68da0
From https://github.com/PJK/libcbor:
libcbor is a C library for parsing and generating CBOR, the general-
purpose schema-less binary data format.
libcbor will be used by ssh to support FIDO/U2F keys. It is currently
intended only for use by ssh, and so is installed as a PRIVATELIB and is
placed in the ssh pkgbase package.
cbor_export.h and configuration.h were generated by the upstream CMake
build. We could create them with bmake rules instead (as NetBSD has
done) but this is a fine start.
This is currently disabled for the 32-bit library build as libfido2 is
not compatible with the COMPAT_32BIT hack in usb_ioctl.h, and there is
no need for libcbor without libfido2.
Reviewed by: kevans
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32347
Use the new kern.stacktop sysctl to retrieve the address of stack top
instead of kern.usrstack. kern.usrstack does not have any knowledge
of the stack gap, so this can cause problems with thread stacks.
Using kern.stacktop sysctl should fix most of those problems.
kern.usrstack is used as a fallback when kern.stacktop cannot be read.
Rename usrstack variables to stacktop to reflect this change.
Fixes problems with firefox and thunderbird not starting with
stack gap enabled.
PR: 239873
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: Stormshield
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D31898
These calls do operate on vnodes only, not file contents.
This is useful for e.g. the xdg-document-portal fuse filesystem.
Reviewed by: kib, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D32438
Introduce the notion of static linker scripts to allow libncursesw.a to
track its dependency on libtinfow.a
this allows the build of older freebsd source tree to happen and make
static linking in part with dynamic linking which already provides a
ldscript
This fixes a bootstrapping FreeBSD 12 or 13 on recent FreeBSD 14
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D32435
zfs send -R -i snap1 pool/ds@snap1 is an invalid invocation of zfs send
because the incremental source and target snapshots are the same. We
have an error message for this condition, but we don't make it there
because of a failed assert while iterating through the dataset's
snapshots.
Check for NULL to avoid the assert so we can make it to the error
message.
Test this form of invalid send invocation in rsend tests. Fix the
rsend_016_neg test while here: log_neg itself doesn't fail the test,
and writing to /dev/null is not supported on all Linux kernels.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes#11121Closes#12533
For those not already familiar with the code base it can be a
challenge to understand how the libraries are laid out. This
has sometimes resulted in functionality being added in the
wrong place. To help avoid that in the future this commit
documents the high-level dependencies for easy reference in
lib/Makefile.am. It also simplifies a few things.
- Switched libzpool dependency on libzfs_core to libzutil.
This change makes it clear libzpool should never depend
on the ioctl() functionality provided by libzfs_core.
- Moved zfs_ioctl_fd() from libzutil to libzfs_core and
renamed it lzc_ioctl_fd(). Normal access to the kmods
should all be funneled through the libzfs_core library.
The sole exception is the pool_active() which was updated
to not use lzc_ioctl_fd() to remove the libzfs_core
dependency.
- Removed libzfs_core dependency on libzutil.
- Removed the lib/libzfs/os/freebsd/libzfs_ioctl_compat.c
source file which was all dead code.
- Removed libzfs_core dependency from mkbusy and ctime
test utilities. It was only needed for some trivial
wrapper functions and that code is easy to replicate
to shed the unneeded dependency.
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12602
login.conf.5 listed passwordtime in RESERVED CAPABILITIES, which is a
section for capabilities not implemented in the base system. However,
passwordtime has been implemented in the base for several years now.
PR: 246099
Reported by: avg
Reviewed by: 0mp
MFC after: 3 days
Describe internal allocations, mention problems with the use of global
malloc(3) and the reasons for internal allocator existence.
Document shared objects implementation and describe shortcomings of the
chosen approach, as well as the rationale why it was done that way.
Reviewed by: markj
Discussed with: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D32243
When you create a pool, zfs writes vd->vdev_enc_sysfs_path with the
enclosure sysfs path to the fault LEDs, like:
vdev_enc_sysfs_path = /sys/class/enclosure/0:0:1:0/SLOT8
However, this enclosure path doesn't get updated on successive imports
even if enclosure path to the disk changes. This patch fixes the issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#11950Closes#12095
after the split, curses.h is now generated by tinfo Makefile, but
still used for a file generated in ncurses lib. Adjust the path to
make sure curses.h is always found
many external program expects libncurses to not be provided as a single
library. Instead of fixing all ports, distribute ncurses the way
upstream distributes it
Turn libncursesw.so into a ldscript which will link automatically as
needed to libtinfow so so this change is seamless at compile time.
Differential Revision: https://reviews.freebsd.org/D32098
The corresponding 32-bit int and 128-bit int functions were added in
790a6be5a1, as were all combinations of the float to int functions,
but these two were overlooked. __floatditf is needed to build curl for
riscv as there's a signed 64-bit int to 128-bit float conversion in
lib/progress.c's trspeed as of 7.77.0.
Reviewed by: dim
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31997
These aren't a part of or use libjail(3), but rather are direct
syscalls. Still, they seem like good additions, allowing us to attach
to already-running jails.
Reviewed by: freqlabs
Differential Revision: https://reviews.freebsd.org/D26927
This is implemented as an iterator, reusing parts of the earlier logic
to populate jailparams from a passed in table.
The user may request any number of parameters to pull in while we're
searching, but we'll force jid and name to appear at a minimum.
Reviewed by: freqlabs
Differential Revision: https://reviews.freebsd.org/D26756
Make it mostly compatible with what's defined for Intel. Except where
noted, these are defined for all of amdzen(1|2|3).
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32162
Looking for "tsc-tsc" in the pmu tables will fail every time. Instead,
make this an alias for the static TSC event defined in pmc_events.h.
This fixes 'pmcstat -s cycles' on Intel and AMD.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32197
The 3com bluetooth PC Card adapter was removed from the tree when PC
Card support was removed earlier this year. Remove stray references to
it still in the tree.
Sponsored by: Netflix
Though it's unlikely anyone will alter its signature, avoids any
possible type mismatch.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Érico Nogueira <erico.erc@gmail.com>
Closes#12567
Allow pf to use dummynet pipes and queues.
We re-use the currently unused IPFW_IS_DUMMYNET flag to allow dummynet
to tell us that a packet is being re-injected after being delayed. This
is needed to avoid endlessly looping the packet between pf and dummynet.
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31904
When this flag is set, operations that update an existing kevent will
not change the udata field. This can be used to NOTE_TRIGGER or
EV_{EN,DIS}ABLE events without overwriting the stashed pointer.
Reviewed by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
Obtained from: CheriBSD
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D30286
CheriBSD defines additional protection flags which use underscores
such as VM_PROT_READ_CAP and VM_PROT_WRITE_CAP.
Obtained from: CheriBSD
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D30017
Add aarch64 to the list of architectures that can run 32bits FreeBSD binaries,
so that truss works correctly with an arm32 binary.
The same should probably be done with mips.
MFC After: 1 week
According to https://github.com/NuxiNL/cloudlibc:
CloudABI is no longer being maintained. It was an awesome experiment,
but it never got enough traction to be sustainable.
There is no reason to keep it in FreeBSD.
Approved by: ed (private mail)
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31923
Define structures related to the depop set of commands (GET PHYSICAL ELEMENT
STATUS, REMOVE ELEMENT AND TRUNCATE, and RESTORE ELEMENT AND REBUILD) as
well as the CDB construction routines.
Also create scsi_wrap.c. This will have convenience routines that will do all
the elements of allocating the ccb, generating the CDB, sending the command
(looping as necessary for cases where data is returned, but it's size isn't
known up front), etc. As this functionality is fleshed out, calling many
camcontrol commands programatically gets much easier.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29017
Add function zfs_destroy_snaps_nvl_os() call. The main issue is that
macOS needs to unmount any mounted snapshots before they can be
destroyed. Other platforms can handle this in the kernel, but sending
a storm of zed events to unmount seems undesirable when we can do it
in userland to start with.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Co-authored-by: ilovezfs <ilovezfs@icloud.com>
Closes#12550
Each locale embeds a lazily initialized lconv which is populated by
localeconv(3) and localeconv_l(3). When setlocale(3) updates the global
locale, the lconv needs to be (lazily) reinitialized. To signal this,
we set flag variables in the locale structure. There are two problems:
- The flags are set before the locale is fully updated, so a concurrent
localeconv() call can observe partially initialized locale data.
- No barriers ensure that localeconv() observes a fully initialized
locale if a flag is set.
So, move the flag update appropriately, and use acq/rel barriers to
provide some synchronization. Note that this is inadequate in the face
of multiple concurrent calls to setlocale(3), but this is not expected
to work regardless.
Thanks to Henry Hu <henry.hu.sh@gmail.com> for providing a test case
demonstrating the race.
PR: 258360
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31899
It allows to override kern.elf{32,64}.allow_wx on per-process basis.
In particular, it makes it possible to run binaries without PT_GNU_STACK
and without elfctl note while allow_wx = 0.
Reviewed by: brooks, emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31779
Reimplement bdf0f24bb1 by checking for the caller' ABI in
the implementation of PT_GET_SC_ARGS, and copying out everything if
it is Linuxolator.
Also fix a minor information leak: if PT_GET_SC_ARGS_ALL is done on the
thread reused after other process, it allows to read some number of that
thread last syscall arguments. Clear td_sa.args in thread_alloc().
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31968
This is one of the pieces required to make modern (ie Focal)
strace(1) work.
Reviewed By: jhb (earlier version)
Sponsored by: EPSRC
Differential Revision: https://reviews.freebsd.org/D28212
As of the Linux 5.9 kernel a fallthrough macro has been added which
should be used to anotate all intentional fallthrough paths. Once
all of the kernel code paths have been updated to use fallthrough
the -Wimplicit-fallthrough option will because the default. To
avoid warnings in the OpenZFS code base when this happens apply
the fallthrough macro.
Additional reading: https://lwn.net/Articles/794944/
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#12441
Implement optional timezone change detection for local time libc
functions. This is disabled by default; set WITH_DETECT_TZ_CHANGES
to build it.
Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #47
Differential Revision: https://reviews.freebsd.org/D30183
By default _pie.a archives are built only for INTERNALLIBs, so there is
usually no need for zfs_defs.pieo to exist. However, some experimental
work builds _pie.a archives for everything. Extend the existing set of
zfs_defs hacks to build zfs_defs.pieo as well.
Reviewed by: arichardson
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31924
On case-insensitive file systems (most likely to be seen on macOS, where
it is the default), _Fork.o for the new POSIX _Fork function conflicts
with _fork.o for the PSEUDO file. This results in non-determinsitic
behaviour in terms of which ends up being present; if _Fork.o wins then
the build fails to link libc.so due to missing __sys_fork, and if
_fork.o wins then libc silently fails to include the implementation of
_Fork. A similar issue occurred in the past for C99's _Exit conflicting
with exit(2) and was fixed in cb1cb6a2a8, so this adds a fix based on
that.
As a longer-term solution it might be better to instead make the
generated files use a different prefix that's less likely to conflict
with other things (such as __sys_foo.o given they always contain that)
but that's a rather more invasive change.
Fixes: 49ad342cc1 ("Add _Fork()")
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D31895
The patch converting fetch to getline
(ee3ca711a8),
did confuse the capacity of the line buffer with the actual len of the read
line confusing fetch -v.
Unlike the other syscalls these two symbols were missing from the
version script. I noticed this while looking into the compiler-rt
runtime libraries for CHERI.
Reviewed by: brooks
Obtained from: https://github.com/CTSRD-CHERI/cheribsd/pull/1063
MFC after: 3 days
Some notable changes, from upstream's release notes:
- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.
Additional integration work is needed to support FIDO/U2F in the base
system.
Deprecation Notice
------------------
OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.
Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985
The new wording for standard flags is losely based on the POSIX
description.
Make it clearer that PROT_MAX() is a local extension.
Reviewed by: alc, mckusick, imp, kib, markj
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D31777
ftp tools aren't that useful nowadays but some might want them.
Create a FreeBSD-ftp package so users have a choice to have
them or not.
Differential Revision: https://reviews.freebsd.org/D31794
The only user of libregex is grep (and its variation), no need for a
dedicated package.
This moves libregex to the default package (FreeBSD-utilities).
Differential Revision: https://reviews.freebsd.org/D31802
libbsdxml is used by a lot of programs so just put it in FreeBSD-runtime.
Differential Revision: https://reviews.freebsd.org/D31800
Reviewed by: emaste
both telnet and telnetd aren't that useful nowadays but some
might want them.
Create a FreeBSD-telnet package so users have a choice to have
them or not.
Differential Revision: https://reviews.freebsd.org/D31791
Reviewed by: emaste
As reported by Ronald, adding the out-of-line LSE atomics helpers for
aarch64 to compiler-rt was not sufficient to link programs using these,
as they also require a __aarch64_have_lse_atomics global. This is
initialized in compiler-rt's lib/builtins/cpu_model.c, roughly similar
to the x86 CPU model and feature detection in that file.
Since upstream does not yet have a FreeBSD specific implementation for
getting the required information, add a simple one that should work for
now, while I try to get it sorted with the LLVM people.
Reported by: Ronald Klop <ronald-lists@klop.ws>
Fixes: cc55ee8009
PR: 257392
MFC after: 2 weeks
Summary:
From Steve Kargl:
Paul Zimmermann has identified a bug in Openlibm's powf(),
which is identical to FreeBSD's libm. Both derived from
fdlibm. https://github.com/JuliaMath/openlibm/issues/212.
Consider
% cat h.c
int
main(void)
{
float x, y, z;
x = 0x1.ffffecp-1F;
y = -0x1.000002p+27F;
z = 0x1.557a86p115F;
printf("%e %e %e <-- should be %e\n", x, y, powf(x,y), z);
return 0;
}
% cc -o h -fno-builtin h.c -lm && ./h
9.999994e-01 -1.342177e+08 inf <-- should be 5.540807e+34
Reviewers: manu
Subscribers: imp, andrew, emaste
Differential Revision: https://reviews.freebsd.org/D31865
When WITH_LLVM_BINUTILS is set, we will install the LLVM binutils as
ar/ranlib/nm/objcopy/etc. instead of the elftoolchain ones.
Having the LLVM binutils instead of the elftoolchain ones allows us to use
features such as LTO that depend on binutils that understand LLVM IR.
Another benefit will be an improved user-experience when compiling with
AddressSanitizer, since ASAN does not symbolize backtraces correctly if
addr2line is elftoolchain addr2line instead of llvm-symbolizer.
See https://lists.freebsd.org/archives/freebsd-toolchain/2021-July/000062.html
for more details.
This is currently off by default but will be turned on by default at some
point in the near future.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D31060
This text dates to the BSD 4.4 import and is misleading. The mprotect
syscall acts on page granularity and breaks up mappings as required to
do so.
Note that with the addition of non-transparent superpages (aka
largepages) the size of a page at a given address may vary. This
commit does not attempt to address the lack of documentation of this
feature.
Sponsored by: DARPA
Reviewed by: alc, mckusick, imp, kib, markj
Differential Revision: https://reviews.freebsd.org/D31776
Currently when an [EAGAIN] is encountered we return a partial result
that does not contain the delimeter. On the next (successful) read we
were returning the next part of the line without the preceding string
from the first failed call.
Fix this by using the same mechanism as ungetc(3) does. For the buffered
case we could simply set fp->_r and fp->_p back to their values before
sappend() is ran but for simplicity ungetc(3) is done in there as well.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D31687
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#12529