With clang 15, the following -Werror warning is produced:
sys/cddl/dev/dtrace/riscv/dtrace_subr.c:165:17: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
dtrace_gethrtime()
^
void
This is because dtrace_gethrtime() is declared with a (void) argument
list, but defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/cddl/dev/dtrace/powerpc/dtrace_subr.c:237:17: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
dtrace_gethrtime()
^
void
This is because dtrace_gethrtime() is declared with a (void) argument
list, but defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/cddl/dev/dtrace/arm/dtrace_subr.c:174:17: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
dtrace_gethrtime()
^
void
This is because dtrace_gethrtime() is declared with a (void) argument
list, but defined with an empty argument list. Make the definition match
the declaration.
MFC after: 3 days
With clang 15, the following -Werror warning is produced:
sys/arm64/rockchip/rk_spi.c:229:6: error: variable 'cnt' set but not used [-Werror,-Wunused-but-set-variable]
int cnt = 0;
^
The 'cnt' variable was in rk_spi.c when it was first added, but it
appears to have been a debugging aid that has never been used, so remove
it.
MFC after: 3 days
The default QEMU config is to have the RTC in UTC. However, if run with
-rtc base=localtime (and wall_cmos_clock is set to match), the driver
fails to account for adjkerntz due to the use of CLOCKF_SETTIME_NO_ADJ.
Copy the same code used by other CLOCKF_SETTIME_NO_ADJ-using drivers
to fix this, namely manually subtracting utc_offset().
Fixes: d63a631e72 ("Add Goldfish RTC device driver for RISC-V")
MFC after: 1 week
Summary:
Code was using the mask value without the shift.
Test Plan: Within FreeBSD/Linux guest, Identify NVMe controller to check the result.
Reviewed by: chuck, imp
MFC after: 2 weeks
Signed-off-by: Wanpeng Qian <wanpengqian@gmail.com>
Differential Revision: https://reviews.freebsd.org/D32659
Summary:
Currently Active Firmware Info is not initialized.
Fix is to initialize the Active Firmware Info to Slot 1.
Test Plan: Within FreeBSD/Linux guests, show the Firmware Logpage to confirm.
Reviewed By: chuck
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32658
Summary:
Set Number of Power States Supported to indicate 1 power state. Keep the
Power State Descriptor data structures as zero to indicate "Not
reported".
Test Plan:
Within FreeBSD/Linux guests, list the number of power states and check
the Max Power value.
Reviewed By: markj, chuck
MFC after: 2 weeks
Signed-off-by: Wanpeng Qian <wanpengqian@gmail.com>
Differential Revision: https://reviews.freebsd.org/D32657
Summary: This returns whether the given 802.11 frame has the protected bit set.
Test Plan:
* tested in AP/STA mode
* STA mode - local athp/ath10k driver
* AP mode - in tree ath driver
Subscribers: imp, melifaro, glebius
Reviewed by: bz
Approved by: bz
Differential Revision: https://reviews.freebsd.org/D36183
The debug print in nvme_opc_get_log_page() would print an uninitialized
local variable.
In nvme_opc_write_read(), a failed LBA bounds check would cause
pci_nvme_stats_write_read_update() to be called with an uninitialized
variable as a parameter. Although the parameter is unused when the
check fails (and so status != 0), LLVM 14 emits some bogus machine code
in this path, which happens to result in a segfault when it gets
executed.
PR: 265749
Reviewed by: chuck, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36119
Currently these are not reported because bhyve is compiled with WARNS=2.
Let's start taking small steps towards enabling more warnings.
No functional change intended.
Reviewed by: chuck, imp, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36118
Commit 24d0c9c1f5 introduced the following regression:
% ldd /bin/ls
/bin/ls:
libutil.so.9 => /lib/libutil.so.9 (0x1021000)
libncursesw.so.9 => /lib/libncursesw.so.9 (0x1021000)
libc.so.7 => /lib/libc.so.7 (0x1021000)
Note that the base address is the same for all displayed libraries.
Fix it by passing correct object to trace_print_obj().
Fixes: 24d0c9c1f5
Reviewed by: jrtc27
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D36198
The Dataset Management code could free an uninitialized pointer if the
device doesn't support the Dataset Management command.
PR: 264548
Reported by: Robert Morris <rtm@lcs.mit.edu>
Fuzzing of bhyve uncovered an assertion failure in the NVMe emulation.
Investigation uncovered several corner cases the code did not handle.
This change handles several Controller initialization errors, including
- bad AQ sizes
- bad AQ vm_map_gpa
- doorbell writes prior to RDY
- doorbell writes to uninitialized queue
- CSTS.RDY if CFS set
PR: 256317,256319,256320,256322
Reported by: Cheolwoo Myung <cwmyung@snu.ac.kr>
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D35453
Fuzzing of bhyve using hyfuzz discovered a way to cause a segmentation
fault in the NVMe emulation. If a guest specifies a physical address in
either the PRP1 or PRP2 field of a command that cannot be mapped from
guest to host, the function paddr_guest2host() returns a NULL pointer.
The NVMe emulation did not check for this error case, which allowed for
the segmentation fault to occur.
Fix is to check for a return value of NULL and indicate an error back to
the guest (Data Transfer error). While in the area, slightly refactor
the write/read blockif function to use a common error exit path.
PR: 256321
Reported by: Cheolwoo Myung <cwmyung@snu.ac.kr>
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D35452
Mark another set of variables that are only used in INVARIANTS builds,
which otherwise result in set-but-not-used warnings.
Fixes: 7dc4d5118c
MFC after: 3 days
Apparently the TARGET_ARCH macro is not supposed to be used outside of
the top-level Makefiles. Directly use MACHINE_ARCH instead.
Noticed by: imp, jrtc27
MFC after: 1 week
With clang 15, the following -Werror warning is produced:
tests/sys/net/if_ovpn/if_ovpn_c.c:19:14: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
fake_sockaddr()
^
void
This is because fake_sockaddr() is declared with a (void) argument list,
but defined with an empty argument list. Make the definition match the
declaration.
MFC after: 3 days
Add domain_remove() SYSUNINT callback that removes the domain
from the domain list if it has DOMF_UNLOADABLE flag set.
This change is required to support netlink ( D36002 ).
Reviewed by: glebius
Differential Revision: https://reviews.freebsd.org/D36173
The minigzip(1) was initially introduced as a minimal replacement
of GNU gzip(1). We have replaced the GNU gzip(1) with the zlib
based, GPL-free implementation, and minigzip(1) is not being used
anywhere in the base system, so just remove it.
Relnotes: yes
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D35979
Notable upstream pull request merges:
#9372 Implement a new type of zfs receive: corrective receive (-c)
#13635 Add snapshots_changed as property
#13636 Add support for per dataset zil stats and use wmsum counters
#13643 Fix scrub resume from newly created hole
#13670 Fix memory allocation for the checksum benchmark
#13695 Skip checksum benchmarks on systems with slow cpu
#13711 zpool: fix redundancy check after vdev removal
Obtained from: OpenZFS
OpenZFS commit: b3d0568cfd
The first time a FreeBSD system boots, it obtains a hostuuid and hostid
from the smbios.system.uuid kernel environment variable. If this value
is found to be invalid, a warning is printed and the boot pauses for
two seconds to give the user a chance to read it.
If the FreeBSD kernel is launched directly in a virtual machine rather
than via the FreeBSD boot loader, the smbios.system.uuid environment
variable might not be set; in this case, there's no need to alert the
user and delay the boot process since the lack of a "hardware" uuid is
entirely expected.
Distinguish between the cases of "invalid UUID" and "no UUID", warning
and delaying the boot only in the former case. In both cases we still
generate a random UUID in software.
Reviewed by: delphij
Sponsored by: https://www.patreon.com/cperciva
Differential Revision: https://reviews.freebsd.org/D36185
When in the hpts path, we need to handle BPF filters since aggregated
packets do not pass up the stack in the normal way. This is already
done for most interfaces, but lagg needs special handling. This is
because packets received via a lagg are passed up the stack with
the leaf interface's ifp stored in m_pkthdr.rcvif.
To handle lagg packets, we must identify that the passed rcvif is
currently a lagg port by checking for IFT_IEEE8023ADLAG or
IFT_INFINIBANDLAG (since lagg changes the lagg port's type to that
when an interface becomes a lagg member). Then we need to find the
lagg's ifp, and handle any BPF listeners on the lagg.
Note: It is possible to have multiple BPF filters, one on a member
port and one on the lagg itself. That is why we have to have 2
checks and 2 ETHER_BPF_MTAPs.
Reviewed by: jhb, rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D36136
The function ffs_vgetf() is used to find or load UFS inodes into a
vnode. It first looks up the inode and if found in the cache its
vnode is returned. If it is not already in the cache, a new vnode
is allocated and its associated inode read in from the disk. The
read is done even for inodes that are being initially created.
The contents for the inode on the disk are assumed to be empty. If
the on-disk contents had been corrupted either due to a hardware
glitch or an agent deliberately trying to exploit the system, the
UFS code could panic from the unexpected partially-allocated inode.
Rather then having fsck_ffs(8) verify that all unallocated inodes
are properly empty, it is easier and quicker to add a flag to
ffs_vgetf() to indicate that the request is for a newly allocated
inode. When set, the disk read is skipped and the inode is set to
its expected empty (zero'ed out) initial state. As a side benefit,
an unneeded disk I/O is avoided.
Reported by: Peter Holm
Sponsored by: The FreeBSD Foundation
Allocation or I/O failures in fsck_ffs(8) could cause segment
faults because of missing checks or not-yet-initialized data
structures. Correct these issues.
Reported by: Peter Holm
Sponsored by: The FreeBSD Foundation
The commit message documented it as /etc/src.conf but the comment in the
source mentioned the non-existent /etc/loader.conf.
Fixes: f8a199f28f ("stand: Raise limit to 550,000 bytes for loader")
into ffs_sbsearch() to allow use by other parts of the system.
Historically only fsck_ffs(8), the UFS filesystem checker, had code
to track down and use alternate UFS superblocks. Since fsdb(8) used
much of the fsck_ffs(8) implementation it had some ability to track
down alternate superblocks.
This change extracts the code to track down alternate superblocks
from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in
sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found
in ffs_subr.c, these functions can be used directly by the kernel
subsystems. Additionally they are exported to the UFS library,
libufs(8) so that they can be used by user-level programs. The new
functions added to libufs(8) are sbfind(3) that is an alternative
to sbread(3) and sbsearch(3) that is an alternative to sbget(3).
See their manual pages for further details.
The utilities that have been changed to search for superblocks are
dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8)
tool found in tools/diag/prtblknos searches for superblocks.
The UFS specific mount code uses the superblock search interface
when mounting the root filesystem and when the administrator doing
a mount(8) command specifies the force flag (-f). The standalone UFS
boot code (found in stand/libsa/ufs.c) uses the superblock search
code in the hope of being able to get the system up and running so
that fsck_ffs(8) can be used to get the filesystem cleaned up.
The following utilities have not been changed to search for
superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8),
dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and
glabel(8). When these utilities fail, they do report the cause of
the failure. The one exception is the tasting code used to try and
figure what a given disk contains. The tasting code will remain
silent so as not to put out a slew of messages as it trying to taste
every new mass storage device that shows up.
Reviewed by: kib
Reviewed by: Warner Losh
Tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D36053
Sponsored by: The FreeBSD Foundation
Summary:
NVMe operations indicate the memory region(s) associated with a command
via physical region pages (PRPs). Since each PRP has a fixed size,
contiguous memory regions larger than the PRP size require multiple PRP
entries.
Instead of issuing a blockif call for each PRP, the NVMe emulation
concatenates multiple contiguous PRP entries into a single blockif
request. The test for contiguous regions has a bug such that it
mistakenly treats an initial PRP address of zero as a contiguous range
and concatenates it with the previous. But because there is no previous
IOV, the concatenation code corrupts the IO request structure and leads
to a segmentation fault when the blockif request completes.
Fix is to test for the existence of a previous range before trying to
concatenate the current range with the previous one.
While in the area, rename pci_nvme_append_iov_req()'s lba parameter to
offset to match its usage.
PR: 264177
Reported by: Robert Morris <rtm@lcs.mit.edu>
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35328
TARGET_ARCH is always wrong when not used at the toplevel Makefile*, or
in something that has to be included from there. Switch to using
MACHINE_ARCH exclusively here since there's no benefit from assigning
TARGET_ARCH the value of MACHINE_ARCH and then using TARGET_ARCH (and
make TARGET_ARCH=xxx won't work).
Sponsored by: Netflix
We don't need the compress rotuines, nor zstd_opt.c. Remove them.
Expand the number of places we omit code for IN_LIBSA (which are FreeBSD
specific). Due to the agressive optimization, though, this doesn't
reduce the size of the loader. It does reduce the number of 'false
positives' for places to omit to reduce the size as well as reducing the
build time slightly.
Sponsored by: Netflix
Reviewed by: tsoome, delphij
Differential Revision: https://reviews.freebsd.org/D36145
The BIOS loader operates in a very constrained environment. The messages
for the super block integrity tests take up about 12k of space. Compile
them out for the BIOS loader, while leaving it intact for all other
loaders that aren't space constrained. These aren't used in the 'super
tiny' *boot* programs, so no adjustment is needed there.
We reply on the fact that (a) i386 doesn't support 32-bit UEFI booting
and (b) LIBSA_CPUARCH is "i386" when building on both i386 and when
we're building the 32-bit libsa32 library.
This saves about 12k of space for this constrained envrionment and will
take a bit of the pressure off some machines where the loader has grown
too big for their BIOS (see comments in i386/loader/Makefile for
details).
Sponsored by: Netflix
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D36175
Raise the limit for /boot/loader to be 550k. The IBM PC imposes a limit
of 640k of RAM below 1MB, which is needed for real mode calls. BTX takes
40k of that. The BIOS takes some amount (25k seems a good "99% take less
than or equal to this" estimate for that, though some systems consume
more). Most typical setups need 25k of stack. This leaves 550k for
code. We set the limit to 550,000 which gives about an extra 13,000
bytes of buffer for machines that whose setups use a little more stack
or whose BIOS reserves a bit more...
Add this derivation in the Makefile. Also recommend setting LOADERSIZE
lower in /etc/src.conf when the loader has to run on a system whose BIOS
takes up more space, or for a complex setup. Add a recipe for how to
find how much RAM your BIOS uses as well (thanks to jhb@ for the
trick). Network cards that boot via PXE and HBAs with their BIOS enabled
are known to be large consumers of lomem space.
Sponsored by: Netflix
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D36152
The functions pbuf_init, kva_alloc, and keg_alloc_slab are significant
contributors to the kernel boot time when FreeBSD boots inside the
Firecracker VMM. Instrument them so they show up on flamecharts.
For some reason protosw.h is used during world complation and userland
is not aware of caddr_t, a relic from the first version of C. Broken
buildworld is good reason to get rid of yet another caddr_t in kernel.
Fixes: 886fc1e804
The validator always returned true due to an incorrect check.
Reviewed by: mhorne, imp
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D36125
