Commit Graph

36 Commits

Author SHA1 Message Date
Justin Hibbits
e150821a8c Add support for NXP/Freescale etsec2 ethernet controller
Adding the compatible property check isn't enough.  Device trees for eTSEC2
devices are missing a 'reg' property on the eTSEC node itself, relegating it to
the queue group child nodes.

Still left to do: add Multigroup mode support (see QorIQ reference manuals s for
SoCs with eTSEC2).

MFC after:	2 weeks
Relnotes:	Yes
2016-08-30 01:58:49 +00:00
Justin Hibbits
af20e818eb Add an alternate compatible string for eTSEC devices.
Newer device trees now use fsl,etsec2 to denote eTSEC nodes.  Same device, new
name.
2016-05-19 00:04:58 +00:00
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Andrew Turner
45fd186285 Allow callers of OF_decode_addr to get the size of the found mapping. This
will allow for code that uses the old fdt_get_range and fdt_regsize
functions to find a range, map it, access, then unmap to replace this, up
to and including the map, with a call to OF_decode_addr.

As this function should only be used in the early boot code the unmap is
mostly do document we no longer need the mapping as it's a no-op, at least
on arm.

Reviewed by:	jhibbits
Sponsored by:	ABT Systems Ltd
Differential Revision:	https://reviews.freebsd.org/D5258
2016-02-16 15:18:12 +00:00
Justin Hibbits
38f004fbb0 Fix a couple printf formats.
This was found when working on 64-bit PowerPC book-e support.
2016-01-01 15:17:24 +00:00
Gleb Smirnoff
c8dfaf382f Mechanically convert to if_inc_counter(). 2014-09-19 03:51:26 +00:00
Ian Lepore
752ba93078 Rename OF_xref_phandle() to OF_node_from_xref() and add a new function
that provides the inverse translation, OF_xref_from_node().

Discussed with:	nwhitehorn
2014-09-01 18:51:01 +00:00
Marcel Moolenaar
aa5fed07eb Remove bogus module dependencies. 2014-07-26 17:57:13 +00:00
Ian Lepore
add35ed5b8 Follow r261352 by updating all drivers which are children of simplebus
to check the status property in their probe routines.

Simplebus used to only instantiate its children whose status="okay"
but that was improper behavior, fixed in r261352.  Now that it doesn't
check anymore and probes all its children; the children all have to
do the check because really only the children know how to properly
interpret their status property strings.

Right now all existing drivers only understand "okay" versus something-
that's-not-okay, so they all use the new ofw_bus_status_okay() helper.
2014-02-02 19:17:28 +00:00
Nathan Whitehorn
629aa519d6 Make tsec work with the device tree present on the RB800. The previous code
assumed that the MDIO bus was a direct child of the Ethernet interface. It
may not be and indeed on many device trees is not. While here, add proper
locking for MII transactions, which may be on a bus shared by several MACs.

Hardware donated by:	Benjamin Perrault
2013-11-11 15:43:21 +00:00
Gleb Smirnoff
66e01d73cd - Provide necessary includes.
- Remove unnecessary includes.

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-29 11:17:49 +00:00
Gleb Smirnoff
76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00
Gleb Smirnoff
c6499eccad Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.
2012-12-04 09:32:43 +00:00
Andrew Thompson
afceeed703 Do not reinitialise the interface if it is already running, this prevents the
bootp+nfs code from working as it calls init on each dhcp send and rx fails to
start in time.
2012-05-09 00:56:11 +00:00
Andrew Thompson
335181759e The DEVICE_POLLING dereference of sc->tsec_ifp needs to be checked for null
first or this will panic. Condense three blocks that check sc->tsec_ifp into
one while I am here.
2012-05-08 21:09:03 +00:00
Rafal Jaworowski
aa15e881bb Respect phy-handle property in Ethernet nodes of the device tree.
This lets specify whereabouts of the parent PHY for a given MAC node
(and get rid of ugly kludges in mge(4) and tsec(4)).

Obtained from:	Semihalf
MFC after:	1 week
2012-03-04 19:22:52 +00:00
Kevin Lo
5bbe0c5357 ether_ifattach() sets if_mtu to ETHERMTU, don't bother set it again
Reviewed by:	yongari
2012-01-07 09:41:57 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Marcel Moolenaar
df0437ca6f Don't use the MAC address in the device tree if it's all zeroes
(i.e. 00-00-00-00-00-00). Use the currently programmed address
instead.

While here, simplify the function.
2011-01-28 23:40:13 +00:00
Marius Strobl
8e5d93dbb4 Convert the PHY drivers to honor the mii_flags passed down and convert
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
  addresses; we now let mii_attach() only probe the PHY at the desired
  address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
  off from, partly even based on grabbing and using the softc of the
  parent; we now pass these flags down from the NIC to the PHY drivers
  via mii_attach(). This got us rid of all such hacks except those of
  brgphy() in combination with bce(4) and bge(4), which is way beyond
  what can be expressed with simple flags.

While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).

Reviewed by:	jhb, yongari
2010-10-15 14:52:11 +00:00
Rafal Jaworowski
d1d3233ebd Convert Freescale PowerPC platforms to FDT convention.
The following systems are affected:

  - MPC8555CDS
  - MPC8572DS

This overhaul covers the following major changes:

  - All integrated peripherals drivers for Freescale MPC85XX SoC, which are
    currently in the FreeBSD source tree are reworked and adjusted so they
    derive config data out of the device tree blob (instead of hard coded /
    tabelarized values).

  - This includes: LBC, PCI / PCI-Express, I2C, DS1553, OpenPIC, TSEC, SEC,
    QUICC, UART, CFI.

  - Thanks to the common FDT infrastrucutre (fdtbus, simplebus) we retire
    ocpbus(4) driver, which was based on hard-coded config data.

Note that world for these platforms has to be built WITH_FDT.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-07-11 21:08:29 +00:00
Rafal Jaworowski
04311706d0 tsec: Use IFQ_DRV macros for managing interface packet queue.
This lets tsec(4) work with ALTQ.

Submitted by:	Marcin Ligenza
MFC after:	1 week
2009-11-20 13:28:06 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Rafal Jaworowski
661ee6eea5 Fix Book-E/MPC85XX build. Some prototypes were wrong and got revealed with
the recent kobj signature checking.
2009-06-13 08:57:04 +00:00
Attilio Rao
1abcdbd127 When user_frac in the polling subsystem is low it is going to busy the
CPU for too long period than necessary.  Additively, interfaces are kept
polled (in the tick) even if no more packets are available.
In order to avoid such situations a new generic mechanism can be
implemented in proactive way, keeping track of the time spent on any
packet and fragmenting the time for any tick, stopping the processing
as soon as possible.

In order to implement such mechanism, the polling handler needs to
change, returning the number of packets processed.
While the intended logic is not part of this patch, the polling KPI is
broken by this commit, adding an int return value and the new flag
IFCAP_POLLING_NOCOUNT (which will signal that the return value is
meaningless for the installed handler and checking should be skipped).

Bump __FreeBSD_version in order to signal such situation.

Reviewed by:	emaste
Sponsored by:	Sandvine Incorporated
2009-05-30 15:14:44 +00:00
Rafal Jaworowski
fb20e2aeac tsec(4) cosmetics. 2009-02-17 16:02:45 +00:00
Rafal Jaworowski
371bf7cc81 tsec(4): Always try to resume the receiver.
This helps recover from RX stall under heavy loads.

Submitted by:	Piotr Ziecik kosmo ! semihalf dot com
2009-02-17 15:59:27 +00:00
Rafal Jaworowski
0390701af8 tsec(4): do not clear interrupt events register before use.
Prior to this fix, IEVENT register was always cleared before calling
tsec_error_intr_locked(), which prevented error recovery actions from
happening with polling enabled (and could lead to serious problems, including
controller hang).

Submitted by:	Marcin Ligenza marcinl ! pacomp dot com dot pl
2009-02-17 15:47:13 +00:00
Rafal Jaworowski
ab160495d3 Handle mbuf exhaustion scenario in tsec(4).
Without this fix the system would hang under heavy networking load.

Submitted by:	Leon Theunissen leon ! parsec dot co dot za
2009-02-17 15:39:16 +00:00
Rafal Jaworowski
64f90c9dff tsec(4) style improvements and clean-up. 2009-02-17 14:59:47 +00:00
Rafal Jaworowski
bd37530ee4 Additional features for the tsec(4) Ethernet driver.
- interrupt coalescing
  - polling
  - jumbo frames
  - multicast
  - VLAN tagging

The enhanced version of the chip (eTSEC) can also take advantage of:

  - TCP/IP checksum calculation h/w offloading

Obtained from:	Freescale, Semihalf
2009-02-17 14:57:05 +00:00
Rafal Jaworowski
321e12c82e tsec: Refactor driver's structure.
Split the driver into the core functionality part (sys/dev/tsec/if_tsec.c) and
the bus attachment (sys/dev/tsec/if_tsec_ocp.c).

This lets better integrate and maintain the driver in other environments with
different attachment abstractions (there is at least one other FreeBSD port --
MPC83xx -- which uses this TSEC driver, but with different local bus model
i.e. some OF derivative). While there, clean up and fix minor cosmetics.

Obtained from:	Semihalf
2008-08-26 10:41:49 +00:00
Rafal Jaworowski
5432bd9f6a tsec: Improve and clean up callouts.
- eliminate the unused tsec_tick_ch callout
- adjust and fix the main tsec callout handling
- minor naming improvements

Obtained from:	Semihalf
2008-08-26 09:38:28 +00:00
Rafal Jaworowski
772619e186 Convert TSEC watchdog to the new scheme.
Reviewed by:	imp, marcel
Approved by:	cognet (mentor)
2008-03-12 16:35:25 +00:00
Rafal Jaworowski
ecb1ab1761 Obtain TSEC h/w address from the parent bus (OCP) and not rely blindly on what
might be currently programmed into the registers.

Underlying firmware (U-Boot) would typically program MAC address into the
first unit only, and others are left uninitialized. It is now possible to
retrieve and program MAC address for all units properly, provided they were
passed on in the bootinfo metadata.

Reviewed by:	imp, marcel
Approved by:	cognet (mentor)
2008-03-12 16:32:08 +00:00
Rafal Jaworowski
67196661ab Support for Freescale integrated Three-Speed Ethernet Controller (TSEC).
TSEC is the MAC engine offering 10, 100 or 1000 Mbps speed and is found on
different Freescale parts (MPC83xx, MPC85xx). Depending on the silicon version
there are up to four TSEC units integrated on the chip.

This driver also works with the enhanced version of the controller (eTSEC),
which is backwards compatible, but doesn't take advantage of its additional
features (various off-loading mechanisms) at the moment.

Approved by:	cognet (mentor)
Obtained from:	Semihalf
MFp4:		e500
2008-03-03 19:03:44 +00:00