Commit Graph

946 Commits

Author SHA1 Message Date
Bjoern A. Zeeb
950cde5085 MFC r200473:
Throughout the network stack we have a few places of
        if (jailed(cred))
  left.  If you are running with a vnet (virtual network stack) those will
  return true and defer you to classic IP-jails handling and thus things
  will be "denied" or returned with an error.

  Work around this problem by introducing another "jailed()" function,
  jailed_without_vnet(), that also takes vnets into account, and permits
  the calls, should the jail from the given cred have its own virtual
  network stack.

  We cannot change the classic jailed() call to do that,  as it is used
  outside the network stack as well.

  Discussed with:       julian, zec, jamie, rwatson (back in Sept)
2009-12-28 14:40:58 +00:00
Bruce M Simpson
27466e91ff MFC r200572:
Add missing #include <sys/ktr.h>.

Submitted by:	Hideki Yamamoto
2009-12-22 20:33:27 +00:00
Michael Tuexen
cf19fced17 MFC 197288,197326,197327,197328,197342,197914,197929,
197955,199365,199370,199371,199373,199866
This MFCs all SCTP/VNET relevant fixes from head.

Approved by: rrs (mentor)
2009-12-07 07:33:51 +00:00
Bjoern A. Zeeb
4fe9cf96e9 MFC r198076:
Explicitly compare to a return code.

  Discussed with: philip (after we both misread the logic there the 1st time)
2009-12-05 19:42:42 +00:00
Bruce M Simpson
025bbb4984 MFC r199522..199528:
Pullup IPv6 mcast SSM KPI fixes from HEAD, including fix for
  filter deallocation from Stef Walter.
2009-11-20 12:30:40 +00:00
Bruce M Simpson
28d8e43cf7 MFC r199518:
Adapt the fix for IGMPv2 in r199287 for the IPv6 stack.
  Only multicast routing is affected by the issue.
2009-11-20 11:58:04 +00:00
Hajimu UMEMOTO
30178759ac MFC r199225:
- We are not guaranteed that we're not dropping a reference that
  we did not add.  Call LLE_REMREF() only when callout_stop()
  actually canceled a pending callout.
- callout_reset() may cancel a pending callout.  When
  callout_reset() canceled a pending callout, call LLE_REMREF()
  to drop a reference for the canceled callout.
2009-11-20 06:54:47 +00:00
Hajimu UMEMOTO
864fb934d0 MFC r199173: CURVNET_RESTORE() was not called in certain cases. 2009-11-14 04:46:24 +00:00
Hajimu UMEMOTO
c303f1eb39 MFC r198976, r198993:
- Don't call LLE_FREE() after nd6_free().
 - Make nd6_llinfo_timer() does its job, again.  ln->la_expire was
   greater than time_second, in most cases.
2009-11-09 15:11:37 +00:00
Qing Li
f60909e3e2 MFC r198418
Use the correct option name in the preprocessor command to enable
or disable diagnostic messages.

Reviewed by:	ru
2009-10-28 21:45:25 +00:00
Qing Li
553a7dec4b MFC r197227
Self pointing routes are installed for configured interface addresses
and address aliases. After an interface is brought down and brought
back up again, those self pointing routes disappeared. This patch
ensures after an interface is brought back up, the loopback routes
are reinstalled properly.

Reviewed by:	bz
Approved by:	re
2009-09-15 22:46:06 +00:00
Qing Li
69406c1632 MFC r196871
The addresses that are assigned to the loopback interface
should be part of the kernel routing table.

Reviewed by:	bz
Approved by:	re
2009-09-05 20:35:18 +00:00
Qing Li
3d2a8d364d MFC r196864
This patch fixes the following issues:
- Interface link-local address is not reachable within the
  node that owns the interface, this is due to the mismatch
  in address scope as the result of the installed interface
  address loopback route. Therefore for each interface
  address loopback route, the rt_gateway field (of AF_LINK
  type) will be used to track which interface a given
  address belongs to. This will aid the address source to
  use the proper interface for address scope/zone validation.
- The loopback address is not reachable. The root cause is
  the same as the above.
- Empty nd6 entries are created for the IPv6 loopback addresses
  only for validation reason. Doing so will eliminate as much
  of the special case (loopback addresses) handling code
  as possible, however, these empty nd6 entries should not
  be returned to the userland applications such as the
  "ndp" command.
Since both of the above issues contain common files, these
files are committed together.

Reviewed by:	bz
Approved by:	re
2009-09-05 17:40:27 +00:00
Qing Li
02642a5729 MFC r196865
This patch fixes an address scope violation. Considering the
scenario where an anycast address is assigned on one interface,
and a global address with the same scope is assigned on another
interface. In other words, the interface owns the anycast
address has only the link-local address as one other address.
Without this patch, "ping6" the anycast address from another
station will observe the source address of the returned ICMP6
echo reply has the link-local address, not the global address
that exists on the other interface in the same node.

Reviewed by:    bz
Approved by:	re
2009-09-05 17:35:31 +00:00
Qing Li
87d2d9c556 MFC r196649
Prefix on-link verification is being performed on statically
configured prefixes. Since these statically configured prefixes
do not have any associated advertising routers, these prefixes
are treated as unreachable and those prefix routes are deleted
from the routing table. Therefore bypass prefixes that are not
learned from router advertisements during prefix on-link check.

Reviewed by:	hrs
Approved by:	re
2009-08-30 22:44:12 +00:00
Qing Li
4090e9b219 MFC r196569
When multiple interfaces exist in the system, with each interface having
an IPv6 address assigned to it, and if an incoming packet received on
one interface has a packet destination address that belongs to another
interface, the routing table is consulted to determine how to reach this
packet destination. Since the packet destination is an interface address,
the route table will return a host route with the loopback interface as
rt_ifp. The input code must recognize this fact, instead of using the
loopback interface, the input code performs a search to find the right
interface that owns the given IPv6 address.

Reviewed by:	bz, gnn, kmacy
Approved by:	re
2009-08-30 22:36:46 +00:00
Robert Watson
a0021692f2 Merge r196535 from head to stable/8:
Use locks specific to the lltable code, rather than borrow the ifnet
  list/index locks, to protect link layer address tables.  This avoids
  lock order issues during interface teardown, but maintains the bug that
  sysctl copy routines may be called while a non-sleepable lock is held.

  Reviewed by:  bz, kmacy, qingli

Approved by:	re (kib)
2009-08-28 21:10:26 +00:00
Robert Watson
3ef94f2b72 Merge r196481 from head to stable/8:
Rework global locks for interface list and index management, correcting
  several critical bugs, including race conditions and lock order issues:

  Replace the single rwlock, ifnet_lock, with two locks, an rwlock and an
  sxlock.  Either can be held to stablize the lists and indexes, but both
  are required to write.  This allows the list to be held stable in both
  network interrupt contexts and sleepable user threads across sleeping
  memory allocations or device driver interactions.  As before, writes to
  the interface list must occur from sleepable contexts.

  Reviewed by:  bz, julian

Approved by:	re (kib)
2009-08-28 20:06:02 +00:00
Qing Li
747a32aaea MFC r196152
A piece of code was added to install a host route when an IPv6 interface
address is configured with a /128 prefix. This is no longer necessary due
to r192011. In fact that code conflicts with r192011. This patch removes
the host route installation when detecting the /128 prefix, and instead
let the code added by r192011 to install the loopback route for that IPv6
interface address.

Approved by:	re
2009-08-12 20:48:50 +00:00
Robert Watson
315e3e38fa Many network stack subsystems use a single global data structure to hold
all pertinent statatistics for the subsystem.  These structures are
sometimes "borrowed" by kernel modules that require a place to store
statistics for similar events.

Add KPI accessor functions for statistics structures referenced by kernel
modules so that they no longer encode certain specifics of how the data
structures are named and stored.  This change is intended to make it
easier to move to per-CPU network stats following 8.0-RELEASE.

The following modules are affected by this change:

      if_bridge
      if_cxgb
      if_gif
      ip_mroute
      ipdivert
      pf

In practice, most of these statistics consumers should, in fact, maintain
their own statistics data structures rather than borrowing structures
from the base network stack.  However, that change is too agressive for
this point in the release cycle.

Reviewed by:	bz
Approved by:	re (kib)
2009-08-02 19:43:32 +00:00
Robert Watson
530c006014 Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks.  Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-08-01 19:26:27 +00:00
Qing Li
df813b7ea2 This patch does the following:
- Allow loopback route to be installed for address assigned to
      interface of IFF_POINTOPOINT type.
    - Install loopback route for an IPv4 interface addreess when the
      "useloopback" sysctl variable is enabled. Similarly, install
      loopback route for an IPv6 interface address when the sysctl variable
      "nd6_useloopback" is enabled. Deleting loopback routes for interface
      addresses is unconditional in case these sysctl variables were
      disabled after an interface address has been assigned.

Reviewed by:	bz
Approved by:	re
2009-07-27 17:08:06 +00:00
Robert Watson
d0728d7174 Introduce and use a sysinit-based initialization scheme for virtual
network stacks, VNET_SYSINIT:

- Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will
  occur each time a network stack is instantiated and destroyed.  In the
  !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT.
  For the VIMAGE case, we instead use SYSINIT's to track their order and
  properties on registration, using them for each vnet when created/
  destroyed, or immediately on module load for already-started vnets.
- Remove vnet_modinfo mechanism that existed to serve this purpose
  previously, as well as its dependency scheme: we now just use the
  SYSINIT ordering scheme.
- Implement VNET_DOMAIN_SET() to allow protocol domains to declare that
  they want init functions to be called for each virtual network stack
  rather than just once at boot, compiling down to DOMAIN_SET() in the
  non-VIMAGE case.
- Walk all virtualized kernel subsystems and make use of these instead
  of modinfo or DOMAIN_SET() for init/uninit events.  In some cases,
  convert modular components from using modevent to using sysinit (where
  appropriate).  In some cases, do minor rejuggling of SYSINIT ordering
  to make room for or better manage events.

Portions submitted by:	jhb (VNET_SYSINIT), bz (cleanup)
Discussed with:		jhb, bz, julian, zec
Reviewed by:		bz
Approved by:		re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
Bjoern A. Zeeb
a08362ce46 sysctl_msec_to_ticks is used with both virtualized and
non-vrtiualized sysctls so we cannot used one common function.

Add a macro to convert the arg1 in the virtualized case to
vnet.h to not expose the maths to all over the code.

Add a wrapper for the single virtualized call, properly handling
arg1 and call the default implementation from there.

Convert the two over places to use the new macro.

Reviewed by:	rwatson
Approved by:	re (kib)
2009-07-21 21:58:55 +00:00
Robert Watson
0a4747d4d0 Garbage collect vnet module registrations that have neither constructors
nor destructors, as there's no actual work to do.

In most cases, the constructors weren't needed because of the existing
protocol initialization functions run by net_init_domain() as part of
VNET_MOD_NET, or they were eliminated when support for static
initialization of virtualized globals was added.

Garbage collect dependency references to modules without constructors or
destructors, notably VNET_MOD_INET and VNET_MOD_INET6.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-07-20 13:55:33 +00:00
Robert Watson
5ee847d3ac Reimplement and/or implement vnet list locking by replacing a mostly
unused custom mutex/condvar-based sleep locks with two locks: an
rwlock (for non-sleeping use) and sxlock (for sleeping use).  Either
acquired for read is sufficient to stabilize the vnet list, but both
must be acquired for write to modify the list.

Replace previous no-op read locking macros, used in various places
in the stack, with actual locking to prevent race conditions.  Callers
must declare when they may perform unbounded sleeps or not when
selecting how to lock.

Refactor vnet sysinits so that the vnet list and locks are initialized
before kernel modules are linked, as the kernel linker will use them
for modules loaded by the boot loader.

Update various consumers of these KPIs based on whether they may sleep
or not.

Reviewed by:	bz
Approved by:	re (kib)
2009-07-19 14:20:53 +00:00
Bruce M Simpson
b36c89e55f Fix a problem, whereby misbehaving IPv6 applications, which don't include
a valid zone ID or interface identifier in a v6 multicast leave, would
trigger a fairly paranoid KASSERT().

Observed with Boost++ regression tests on ref8.freebsd.org.

Approved by:	re (kib)
2009-07-18 17:38:18 +00:00
Robert Watson
1e77c1056a Remove unused VNET_SET() and related macros; only VNET_GET() is
ever actually used.  Rename VNET_GET() to VNET() to shorten
variable references.

Discussed with:	bz, julian
Reviewed by:	bz
Approved by:	re (kensmith, kib)
2009-07-16 21:13:04 +00:00
Robert Watson
eddfbb763d Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator.  Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...).  This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack.  Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory.  Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy.  Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address.  When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by:  bz
Reviewed by:            bz, zec
Discussed with:         gnn, jamie, jeff, jhb, julian, sam
Suggested by:           peter
Approved by:            re (kensmith)
2009-07-14 22:48:30 +00:00
Qing Li
05b262e264 This patch adds a host route to an interface address (that is assigned
to a non loopback/ppp link type) through the loopback interface. Prior
to the new L2/L3 rewrite, this host route was explicitly created when
processing the IPv6 address assignment. This loopback host route is
deleted when that IPv6 address is removed from the interface.

Reviewed by:	bz, gnn
Approved by:	re
2009-07-12 19:20:55 +00:00
Robert Watson
5f06a81ae9 Fix "options VIMAGE_GLOBALS" build following introduction of
in6_ifaddrhead.

Approved by:	re (kib)
2009-06-29 15:23:50 +00:00
Robert Watson
f291b9cd38 In in6_update_ifa(), jump to 'cleanup' rather than returning directly
in one additional case, avoiding an ifaddr reference leak.

Defer releasing the in6_ifaddr's in6_ifaddrhead reference until the
end of in6_unlink_ifa(), as callers are inconsistent regarding whether
or not they hold a reference across the call.  This avoids using the
ifaddr after it may have been freed.

Reported by:	tegge
Reviewed by:	tegge
Approved by:	re (blanket)
MFC after:	6 weeks
2009-06-27 11:05:53 +00:00
Robert Watson
d1da0a0672 Add address list locking for in6_ifaddrhead/ia_link: as with locking
for in_ifaddrhead, we stick with an rwlock for the time being, which
we will revisit in the future with a possible move to rmlocks.

Some pieces of code require significant further reworking to be
safe from all classes of writer-writer races.

Reviewed by:	bz
MFC after:	6 weeks
2009-06-25 16:35:28 +00:00
Robert Watson
3cfed08d1d Clean up reference management in in6_update_ifa and in6_unlink_ifa, and
in particular, add a reference for in6_ifaddrhead since we do remove a
reference for it when an IPv6 address is removed.  This fixes ifconfig
delete of an IPv6 alias.

Reported by:	tegge
MFC after:	6 weeks
2009-06-25 08:37:38 +00:00
Robert Watson
80af0152f3 Convert netinet6 to using queue(9) rather than hand-crafted linked lists
for the global IPv6 address list (in6_ifaddr -> in6_ifaddrhead).  Adopt
the code styles and conventions present in netinet where possible.

Reviewed by:	gnn, bz
MFC after:	6 weeks (possibly not MFCable?)
2009-06-24 21:00:25 +00:00
Bjoern A. Zeeb
88d166bf19 Make callers to in6_selectsrc() and in6_pcbladdr() pass in memory
to save the selected source address rather than returning an
unreferenced copy to a pointer that might long be gone by the
time we use the pointer for anything meaningful.

Asked for by:	rwatson
Reviewed by:	rwatson
2009-06-23 22:08:55 +00:00
Robert Watson
8c0fec805f Modify most routines returning 'struct ifaddr *' to return references
rather than pointers, requiring callers to properly dispose of those
references.  The following routines now return references:

  ifaddr_byindex
  ifa_ifwithaddr
  ifa_ifwithbroadaddr
  ifa_ifwithdstaddr
  ifa_ifwithnet
  ifaof_ifpforaddr
  ifa_ifwithroute
  ifa_ifwithroute_fib
  rt_getifa
  rt_getifa_fib
  IFP_TO_IA
  ip_rtaddr
  in6_ifawithifp
  in6ifa_ifpforlinklocal
  in6ifa_ifpwithaddr
  in6_ifadd
  carp_iamatch6
  ip6_getdstifaddr

Remove unused macro which didn't have required referencing:

  IFP_TO_IA6

This closes many small races in which changes to interface
or address lists while an ifaddr was in use could lead to use of freed
memory (etc).  In a few cases, add missing if_addr_list locking
required to safely acquire references.

Because of a lack of deep copying support, we accept a race in which
an in6_ifaddr pointed to by mbuf tags and extracted with
ip6_getdstifaddr() doesn't hold a reference while in transmit.  Once
we have mbuf tag deep copy support, this can be fixed.

Reviewed by:	bz
Obtained from:	Apple, Inc. (portions)
MFC after:	6 weeks (portions)
2009-06-23 20:19:09 +00:00
Bjoern A. Zeeb
5736e6fb9d After cleaning up rt_tables from vnet.h and cleaning up opt_route.h
a lot of files no longer need route.h either. Garbage collect them.
While here remove now unneeded vnet.h #includes as well.
2009-06-23 17:03:45 +00:00
Bjoern A. Zeeb
0c88be0499 In r194702 I meant to remove vnet.h which is no longer needed, not route.h. 2009-06-23 14:54:42 +00:00
Bjoern A. Zeeb
14a20db534 in6_rtqdrain() has been unused. Cleanup.
As this was the only consumer of net/route.h left remove that as well.
2009-06-23 13:22:19 +00:00
Robert Watson
1099f828b3 Clean up common ifaddr management:
- Unify reference count and lock initialization in a single function,
  ifa_init().
- Move tear-down from a macro (IFAFREE) to a function ifa_free().
- Move reference count bump from a macro (IFAREF) to a function ifa_ref().
- Instead of using a u_int protected by a mutex to refcount(9) for
  reference count management.

The ifa_mtx is now used for exactly one ioctl, and possibly should be
removed.

MFC after:	3 weeks
2009-06-21 19:30:33 +00:00
Roman Divacky
e40bae9a45 Switch cmd argument to u_long. This matches what if_ethersubr.c does and
allows the code to compile cleanly on amd64 with clang.

Reviewed by:	rwatson
Approved by:	ed (mentor)
2009-06-21 10:29:31 +00:00
Bjoern A. Zeeb
ebd8672cc3 Add explicit includes for jail.h to the files that need them and
remove the "hidden" one from vimage.h.
2009-06-17 15:01:01 +00:00
Jamie Gritton
c1f192193d Rename the host-related prison fields to be the same as the host.*
parameters they represent, and the variables they replaced, instead of
abbreviated versions of them.

Approved by:	bz (mentor)
2009-06-13 15:39:12 +00:00
Marko Zec
878a6d7dff Remove unnecessary #ifdef lines and code.
Approved by:	julian (mentor)
2009-06-12 09:31:14 +00:00
Colin Percival
9a1bde1808 Prevent integer overflow in direct pipe write code from circumventing
virtual-to-physical page lookups. [09:09]

Add missing permissions check for SIOCSIFINFO_IN6 ioctl. [09:10]

Fix buffer overflow in "autokey" negotiation in ntpd(8). [09:11]

Approved by:	so (cperciva)
Approved by:	re (not really, but SVN wants this...)
Security:	FreeBSD-SA-09:09.pipe
Security:	FreeBSD-SA-09:10.ipv6
Security:	FreeBSD-SA-09:11.ntpd
2009-06-10 10:31:11 +00:00
Bjoern A. Zeeb
8d8bc0182e After r193232 rt_tables in vnet.h are no longer indirectly dependent on
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.

Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.
2009-06-08 19:57:35 +00:00
Marko Zec
bc29160df3 Introduce an infrastructure for dismantling vnet instances.
Vnet modules and protocol domains may now register destructor
functions to clean up and release per-module state.  The destructor
mechanisms can be triggered by invoking "vimage -d", or a future
equivalent command which will be provided via the new jail framework.

While this patch introduces numerous placeholder destructor functions,
many of those are currently incomplete, thus leaking memory or (even
worse) failing to stop all running timers.  Many of such issues are
already known and will be incrementaly fixed over the next weeks in
smaller incremental commits.

Apart from introducing new fields in structs ifnet, domain, protosw
and vnet_net, which requires the kernel and modules to be rebuilt, this
change should have no impact on nooptions VIMAGE builds, since vnet
destructors can only be called in VIMAGE kernels.  Moreover,
destructor functions should be in general compiled in only in
options VIMAGE builds, except for kernel modules which can be safely
kldunloaded at run time.

Bump __FreeBSD_version to 800097.
Reviewed by:	bz, julian
Approved by:	rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
Hiroki Sato
dbe5926046 Fix and add a workaround on an issue of EtherIP packet with reversed
version field sent via gif(4)+if_bridge(4).  The EtherIP
implementation found on FreeBSD 6.1, 6.2, 6.3, 7.0, 7.1, and 7.2 had
an interoperability issue because it sent the incorrect EtherIP
packets and discarded the correct ones.

This change introduces the following two flags to gif(4):

 accept_rev_ethip_ver: accepts both correct EtherIP packets and ones
    with reversed version field, if enabled.  If disabled, the gif
    accepts the correct packets only.  This flag is enabled by
    default.

 send_rev_ethip_ver: sends EtherIP packets with reversed version field
    intentionally, if enabled.  If disabled, the gif sends the correct
    packets only.  This flag is disabled by default.

These flags are stored in struct gif_softc and can be set by
ifconfig(8) on per-interface basis.

Note that this is an incompatible change of EtherIP with the older
FreeBSD releases.  If you need to interoperate older FreeBSD boxes and
new versions after this commit, setting "send_rev_ethip_ver" is
needed.

Reviewed by:	thompsa and rwatson
Spotted by:	Shunsuke SHINOMIYA
PR:		kern/125003
MFC after:	2 weeks
2009-06-07 23:00:40 +00:00
Robert Watson
bcf11e8d00 Move "options MAC" from opt_mac.h to opt_global.h, as it's now in GENERIC
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.

Discussed with:	pjd
2009-06-05 14:55:22 +00:00