All files are now created relative to savedirfd, e.g. with openat(2).
Therefore, we do not need character buffers to be PATH_MAX bytes long,
just long enough to hold the complete filename. 32 bytes is long enough
in all cases. These can be allocated on the stack.
While here, fix an error message that attempts to use an uninitialized
infoname.
Reviewed by: markj
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34821
So that new callers of getbounds() don't need to duplicate it.
Reviewed by: markj
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34783
When asked to print rules recursively, correctly recurse for anchors
included in pf.conf with "anchorname/*".
PR: 262590
Reviewed by: kp
MFC after: 3 weeks
This fixes a performance problem where poudriere -j 104 keeps remounting
filesystems, which induce wanting to signal mountd, if running. The
current code tries to do it by creating the pidfile in /var/run and
unlinking it if the operation succeeds, inducing contention against
anything doing an exec as it tries to look up /var/run/ld-elf.so.hints
Differential Revision: https://reviews.freebsd.org/D34681
This check was previously in `create` only, not applying to renames. It
should really be applied at the libbe level, so that we can avoid
writing about this restriction over and over again.
While we're here: `bectl rename` always succeeds, even when it doesn't.
Start returning the error.
Reported By: Christian McDonald <cmcdonald netgate com>
Reviewed by: rew, jwmaag_gmail.com (earlier version)
Differential Revision: https://reviews.freebsd.org/D34605
Discuss the standard type of layout, as well as the "deep" BE layout,
and some of the properties of both. Point the various -r flags at this
new section, to help users understand which they're working with and
what the -r flag is actually doing. Note that we may just deprecate the
-r flag in future versions, but the flag will be recognized as a NOP at
that point.
Reviewed by: pauamma_gundo.com, rew
Differential Revision: https://reviews.freebsd.org/D34538
"ifconfig -g groupname" prints a list of interface names,
which could be confusing, because it differs from
the behavior of "ifconfig -a -g groupname".
While here, add two examples showing the difference between
"ifconfig -a -g groupname" and "ifconfig -g groupname".
Fixes: 0dad3f0e15 Import interface groups from OpenBSD.
MFC after: 2 weeks
This reference has been present in the manual page since the initial
import of BSD 4.4 Lite sbin Sources. It's time for it to be removed.
MFC after: 2 weeks
- Remove extraneous examples
- Apply "-compact" to the list macros so that it is possible to fit the
definitions of the types and formats in one terminal screen.
MFC after: 2 weeks
This change is about moving the -f documentation into the right place in
the manual. Also, document the IFCONFIG_FORMAT variable in the
ENVIRONMENT section.
MFC after: 2 weeks
In order to clean up the layout of the manual page, let's keep
parameters in the end of the DESCRIPTION section. This patch does not
change any content, it's meant to only move the content around before
refactoring.
MFC after: 2 weeks
- There is no need to mention in the synopsis that -f can be a list of
comma-separated type:format pairs. Let's keep it simple instead.
- Mention that -f can be supplied multiple times.
- Add -f to other entries in the synopsis where it can be used.
MFC after: 2 weeks
As documented, the -C flag can only be used on its own. Any other
command modifiers and flags are ignored when -C is used. Reflect that in
synopsis.
MFC after: 2 weeks
We document capability codes (the CAPS field of "ifconfig wlan0 scan")
in both ifconfig(8) and the handbook. The list is more complete in the
manual page, while the descriptions of individual capabilities are more
detailed in the handbook.
In order to reduce content duplication and bit rot, let's move
handbook's details to the manual page and reference the manual page
whenever necessary.
Reviewed by: debdrup
Reviewed by: Pau Amma
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D34662
Disallow the use of tables in ethernet rules. Using tables requires
taking the PF_RULES lock. Moreover, the current table code isn't ready
to deal with ethernet rules.
Disallow their use for now.
Sponsored by: Rubicon Communications, LLC ("Netgate")
When using the snapshot option, all other options are ignored. This
update reflects changes made in ab2dbd9b87.
Reviewed by: 0mp, mckusick
Differential Revision: https://reviews.freebsd.org/D34584
When retrieving nat rules in anchors we need to set the path just like
we do for regular rules.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
The -r flag is ignored by the FreeBSD implementation of bsdlabel(8)
(also called disklabel(8) in the past). Remove its use from examples
and tests in the tree.
This commit does not touch historical documentation under share/doc/smm
and files under contrib/netbsd-tests.
Reviewed by: imp
MFC after: 2 weeks
Approved by: imp (src)
Fixes: 57dfbec57b More axe-work:
Differential Revision: https://reviews.freebsd.org/D34585
for missing devices.
The fsck_ffs(8) utility uses its internal function openfilesys()
when opening a disk to be checked. This change avoids the use
of pfatal() in openfilesys() which always exits with failure (exit
value 8) so that the caller can choose the correct exit value.
In the case of a non-existent device it should exit with value 3
which allows the startup system to wait for drives (such as those
attached by USB) to come online.
Reported by: karels
Tested by: karels
PR: 262580
MFC after: 3 days
Allow filtering based on the source or destination IP/IPv6 address in
the Ethernet layer rules.
Reviewed by: pauamma_gundo.com (man), debdrup (man)
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34482
FreeBSD 14.0 is going to ship with a new implementation of the mixer(8)
command. Unfortunately, in order to support new features like mute, the
command-line interface of the new implementation is not backwards
compatible.
Update all the remaining documentation and scripts in the src tree
to use the new syntax.
While here, document in usbhidaction.1 that the mute functionality is
now supported.
Reviewed by: christos, debdrup, hselasky
Approved by: hselasky (src)
Fixes: 903873ce15 Implement and use new mixer(3) library for FreeBSD.
Differential Revision: https://reviews.freebsd.org/D34545
Traditionally the GEOM's primary channel of information from kernel to
user-space was confxml, fetched by libgeom through kern.geom.confxml
sysctl. It is convenient and informative, representing full state of
GEOM in a single XML document. But problems start to arise on systems
with hundreds of disks, where the full confxml size reaches many
megabytes, taking significant time to first write it and then parse.
This patch introduces alternative solution, allowing to fetch much
smaller XML document, subset of the full confxml, limited to 64KB and
representing only one specified geom and optionally its parents. It
uses existing GEOM control interface, extended with new "getxml" verb.
In case of any error, such as the buffer overflow, it just transparently
falls back to traditional full confxml. This patch uses the new API in
user-space GEOM tools where it is possible.
Reviewed by: imp
MFC after: 2 month
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D34529
I see more user-friendly to do nothing if the module is already
loaded, rather than returning quite confusing error message.
As side effect it allows to avoid std_list_available() call, using
quite expensive on large systems geom_gettree().
MFC after: 1 month
Introduce pfctl_get_rules_info(), similar to pfctl_get_eth_rules_info()
to retrieve rules information (ticket and total number of rules).
Use the new function in pfctl.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34443
Make gctl_add_param() API public, allowing more precise control over
parameter flags. Previously it was impossible to properly declare
write-only ASCII parameters, used for result reporting, they were
declared as read-write binary instead, that was not nice.
MFC after: 1 month
When printing the interface name from the ipstate_t struct the interface
name in is_ifp may not always be avaiable when reading it from kmem
(tested on FreeBSD and NetBSD). However the is_ifname (the interface
name character string) is almost always available -- it is not available
when the source of the packet is a process running on the firewall
itself. Rather than print both interface name strings, print only the
one.
MFC after: 1 week
Rather than use a kmem read to determine the interface name used by a
nat_t structure through a pointer, nat_ipfs->netif->if_xname, obtain it
directly from nat_ifnames in the nat_t structure itself using the new
FORMAT_IF macro.
MFC after: 1 week
Interface names stored in the ipstate_t and ipnat_t structures can be
NULL. This occurs when an application, such as named, is running on the
firewall machine itself. For example an application, i.e. named, running
on the firewall itself will cause a state table display and NAT mapping
display to show a null ingress interface and its egress interface. This
is perfectly valid but confusing to human eyes. Rather than print
nothing, print "(null)".
MFC after: 1 week
Just as pfctl already does for other rules we print the ethernet rules
we would have loaded if '-n' is specified.
Sponsored by: Rubicon Communications, LLC ("Netgate")
When filtering Ethernet packets allow rules to specify a mac address
with a mask. This indicates which bits of the specified address are
significant. This allows users to do things like filter based on device
manufacturer.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Teach the 'ether' rules to accept { mac1, mac2, ... } lists, similar to
the lists of interfaces or IP addresses we already supported for layer 3
filtering.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32481
Allow packets to be tagged with dummynet information. Note that we do
not apply dummynet shaping on the L2 traffic, but instead mark it for
dummynet processing in the L3 code. This is the same approach as we take
for ALTQ.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D32222
If we're not filtering on a specific MAC address don't print it at all,
rather than showing an all-zero address.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31749
Allow the evaluations/packets/bytes counters on Ethernet rules to be
cleared.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31748
Extent pfctl to be able to read configured Ethernet filtering rules from
the kernel and print them.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D31738
The gunion(8) utility is used to track changes to a read-only disk on
a writable disk. Logically, a writable disk is placed over a read-only
disk. Write requests are intercepted and stored on the writable
disk. Read requests are first checked to see if they have been
written on the top (writable disk) and if found are returned. If
they have not been written on the top disk, then they are read from
the lower disk.
The gunion(8) utility can be especially useful if you have a large
disk with a corrupted filesystem that you are unsure of how to
repair. You can use gunion(8) to place another disk over the corrupted
disk and then attempt to repair the filesystem. If the repair fails,
you can revert all the changes in the upper disk and be back to the
unchanged state of the lower disk thus allowing you to try another
approach to repairing it. If the repair is successful you can commit
all the writes recorded on the top disk to the lower disk.
Another use of the gunion(8) utility is to try out upgrades to your
system. Place the upper disk over the disk holding your filesystem
that is to be upgraded and then run the upgrade on it. If it works,
commit it; if it fails, revert the upgrade.
Further details can be found in the gunion(8) manual page.
Reviewed by: Chuck Silvers, kib (earlier version)
tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D32697
NAT table mappings list only the source and destination IP, the source
and destinaion port numbers, and their mappings. But the protocol is not
listed. Now that Facebook and Google use QUIC, seeing port 443 in in a
list of active NAT sessions could mean 443/tcp or 443/udp. This patch
adds the protocol to the listing to aid in determining whether HTTPS is
TCP or QUIC in a NAT mapping listing. This also helps differentiatinete
between other protocols such as ICMP, ESP, and AH in ipnat list of active
sessions.
MFC after: 1 week
The cleanup of fsck_ffs(8) in commit c0bfa109b9 broke fsdb(8).
This commit adds the one-line update needed in fsdb(8) to make it
work with the new fsck_ffs(8) structure.
Reported by: Chuck Silvers
Tested by: Chuck Silvers
MFC after: 3 days
Minor improvements to the fwdownload code suggested by chs@:
o Print the path_id/target we're rescanning so it's not invisible
o No need for XPT_GDEVLIST, all the info is filled in. Remove sending it
as well as a comment related to it from a mistaken observation. libcam
always fills these in properly, so use those for the ccb path/target.
o Don't leak /dev/xpt fd in success cases.
o Rename fw_rescan_lun to fw_rescan_target and pass sim_mode to
only print path_id and target_id info.
Reviewed by: chs@
Fixes: 9835900cb9
Sponsored by: Netflix
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D34348
After downloading the firmware to a device, it's inquiry data likely
will change. Force a rescan of the target with the CAM_EXPECT_INQ_CHANGE
flag to get it to record the new inqury data as being expected. This
avoids the need for a 'camcontrol rescan' on the device which detaches
and re-attaches the disk (da, ada) device. This brings fwdownload up to
nvmecontrol's ability to do the same thing w/o changing the exposed
nvme/nvd/nda device. We scan the target and not the LUN because dual
actuator drives have multiple LUNs, but the firmware is global across
many vendors' drives (and the so far theoretical ones that aren't won't
be harmed by the rescan).
Since the underlying struct disk is now preserved accross this
operation, it's now possible to upgrade firmware of a root device w/o
crashing the system. On systems that are quite busy, the worst that
happens is that certain operaions are reported cancelled when the new
firmware is activated. These operations are retried with the normal CAM
recovery mechanisms and will work on the retry. The only visible hiccup
is the time that new firmware is flashing / initializing. One should not
consider this operation completely risk free, however, since not all
drives are well behaved after a firmware download.
MFC After: 1 week
Relnotes: yes
Sponsored by: Netflix
Feedback by: mav
Differential Revision: https://reviews.freebsd.org/D34325
Add boottrace annotations to record events in init(8), shutdown(8), and
reboot(8).
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
X-NetApp-PR: #23
Differential Revision: https://reviews.freebsd.org/D31928